MPX2010DP vs MPXC2012DT1 Vergleich
Detaillierter Direktvergleich von MPX2010DP von NXP Semiconductors und MPXC2012DT1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2010DP | MPXC2012DT1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $7,40 |
| Sensortyp | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | — |
| Ausgangstyp | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (analog mV) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Versorgungsspannung | 10 V DC typical (max 16 V) | — |
| Linearity | ±0.05% (typ) | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| Betriebstemperatur | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Over Pressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 24 mV to 26 mV (typ. 25 mV) at 10 V excitation |
| Offset (Null) | — | 0 mV nominal at 10 V excitation |
| Excitation Voltage | — | 10 V DC typical |
| Bridge Resistance | — | [DATA_NEEDED: input/output bridge resistance] |
| Pressure Port Size | — | Female, 0.128 in (3.25 mm) side port |
| Port Style | — | Side port, single barbed inlet |
| Gehäuse / Bauform | — | 4-SSIP Module (chip-pak, no gel) |
| Termination Style | — | Through-hole PCB (vertical mount) |
| Gel Protection | — | No (bare die in chip-pak cavity) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| Montageart | — | Through-hole, vertical |
| MSL-Level | — | Not applicable (through-hole sensor module) |
| Manufacturer | — | NXP Semiconductors (formerly Freescale / Motorola) |