MPX2010DP vs MPXC2012DT1 Comparaison
Comparaison détaillée côte à côte de MPX2010DP par NXP Semiconductors et MPXC2012DT1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPX2010DP | MPXC2012DT1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,50 | $7,40 |
| Type de capteur | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | — |
| Type de sortie | Analog voltage, Wheatstone bridge (mV level) | Wheatstone Bridge (analog mV) |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| Tension d'alimentation | 10 V DC typical (max 16 V) | — |
| Linearity | ±0.05% (typ) | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | — |
| Température de fonctionnement | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Response Time | 1.0 ms (typical) | — |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Pressure Type | — | Differential |
| Operating Pressure | — | 1.45 PSI (10 kPa) |
| Maximum Over Pressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 24 mV to 26 mV (typ. 25 mV) at 10 V excitation |
| Offset (Null) | — | 0 mV nominal at 10 V excitation |
| Excitation Voltage | — | 10 V DC typical |
| Bridge Resistance | — | [DATA_NEEDED: input/output bridge resistance] |
| Pressure Port Size | — | Female, 0.128 in (3.25 mm) side port |
| Port Style | — | Side port, single barbed inlet |
| Boîtier / Format | — | 4-SSIP Module (chip-pak, no gel) |
| Termination Style | — | Through-hole PCB (vertical mount) |
| Gel Protection | — | No (bare die in chip-pak cavity) |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| Type de montage | — | Through-hole, vertical |
| Niveau MSL | — | Not applicable (through-hole sensor module) |
| Manufacturer | — | NXP Semiconductors (formerly Freescale / Motorola) |