Produits (44 000+)

H5TC4G63AFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63AFR-PBA

H5TC4G63AFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63AFR-PBA is a 4Gb DDR3L SDRAM organized as 256M x 16, manufactured by SK hynix. It operates at a low voltage of 1.35V, reducing power consumption by approximately 15% compared to standard DDR3 (1.5V). The device is housed in a 96-ball FBGA package, offering a compact footprint suitable for space-constrained applications. With a data rate of up to 1866 Mbps (PC3L-14900), it delivers high bandwidth for demanding computing tasks. DDR3L SDRAM is a type of dynamic random-access memory that uses double data rate architecture, transferring data on both edges of the clock signal. It is part of the DDR3 family, which succeeded DDR2 and was widely adopted in PCs, servers, and embedded systems. DDR3L specifically operates at 1.35V, making it ideal for power-sensitive applications such as laptops, networking equipment, and industrial computing. Key features include a 16-bit I/O interface, 8 internal banks, and support for burst lengths of 8 and 4 (with burst chop). The device includes on-die termination (ODT), ZQ calibration, and write leveling for improved signal integrity. It also supports auto self-refresh and partial array self-refresh for power savings. The operating temperature range is 0°C to +95°C (Tcase), suitable for commercial and industrial environments. Technically, the H5TC4G63AFR-PBA uses a CMOS process and features programmable CAS latency (CL) of 11, 12, and 13, with corresponding tRCD and tRP values. The device supports DLL (Delay-Locked Loop) for precise timing and includes a mode register for configuration. The 96-ball FBGA package has a ball pitch of 0.8mm, enabling high-density PCB layouts. Typical applications include DDR3L memory modules for laptops, embedded systems, networking routers, and industrial PCs. Its low voltage and high density make it suitable for designs requiring energy efficiency and compactness. The device is also used in set-top boxes and automotive infotainment systems. When designing with this component, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to maintain signal integrity at high speeds. The VDD and VDDQ should be supplied with 1.35V, and the reference voltage (VREF) must be generated accurately.

USD $3,98 Contact
H5TC4G63AFR-PBI - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63AFR-PBI

H5TC4G63AFR-PBI - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The SK Hynix H5TC4G63AFR-PBI is a 4Gb DDR3L SDRAM organized as 256Mx16, operating at 1.35V with a data rate of DDR3-1600 (PC3L-12800). It comes in a 96-ball FBGA package (TFBGA, BGA96, 9x16, 32) and is designed for industrial temperature range (-40°C to +95°C). This memory device is widely used in networking, embedded computing, and industrial applications where low power and high density are required. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by up to 20% while maintaining similar performance. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, and is commonly used in servers, routers, and industrial PCs. DDR3L is backward compatible with DDR3 slots in many designs, making it a versatile choice for memory upgrades. Key features include a 16-bit I/O width, 8 internal banks, and a burst length of 8 (BL8) with on-die termination (ODT) and programmable CAS latency. The device supports auto-refresh and self-refresh modes, with a typical refresh period of 7.8us at 85°C. The industrial temperature grade ensures reliable operation in harsh environments, and the 96-ball FBGA package provides a compact footprint for space-constrained designs. The H5TC4G63AFR-PBI uses a CMOS process technology and features a pseudo-open-drain output driver with adjustable impedance. It includes a DLL (Delay-Locked Loop) for precise timing alignment and supports write leveling for improved signal integrity. The memory operates from a single 1.35V supply, with an on-chip voltage regulator for the core, reducing external component count. Typical applications include network routers and switches, industrial automation controllers, embedded computing modules, and test and measurement equipment. Its low voltage and high density make it ideal for power-sensitive systems that require large memory capacity. When designing with this device, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins, and follow the PCB layout guidelines in the datasheet to minimize signal integrity issues. The device requires a stable 1.35V supply and a clean clock signal for reliable operation.

Devis Contact
H5TC4G63AFR-PBJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63AFR-PBJ

H5TC4G63AFR-PBJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The SK Hynix H5TC4G63AFR-PBJ is a 4Gb DDR3L SDRAM organized as 256M x 16, operating at 1.35V to reduce power consumption while delivering high bandwidth for main memory applications. It comes in a 96-ball TFBGA package with industrial temperature grade, making it suitable for embedded systems, networking equipment, and industrial computing. DDR3L (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory (SDRAM) that operates at 1.35V, offering a 15% power reduction compared to standard DDR3 at 1.5V. It is part of the DDR3 family, which uses double data rate signaling to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is widely used in laptops, servers, and embedded systems where power efficiency is critical. Key features include a 256M x 16 organization, 96-ball TFBGA package, industrial temperature grade (-40°C to +95°C), and support for 8192 refresh cycles. The device supports auto self-refresh, data mask, auto precharge, asynchronous reset, dynamic on-chip termination (DTC), ZQ calibration, and write leveling, ensuring reliable operation in demanding environments. The H5TC4G63AFR-PBJ uses a CMOS process and features a rectangular package shape. It is designed for high-density, high-bandwidth, and low-power applications. The industrial temperature grade allows operation in harsh conditions, making it ideal for automotive, industrial, and networking applications. Typical applications include main memory for embedded processors, networking routers and switches, industrial PCs, and test equipment. The low voltage and high bandwidth make it suitable for power-sensitive designs. When designing with this device, ensure proper decoupling and signal integrity practices are followed. The ZQ calibration pin requires a 240-ohm resistor to ground for optimal signal quality.

Devis Contact
H5TC4G63AFR-PBR - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63AFR-PBR

H5TC4G63AFR-PBR - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63AFR-PBR is a 4Gb DDR3L SDRAM (Double Data Rate 3 Low Voltage) organized as 256M x 16, manufactured by SK Hynix. It operates at a supply voltage of 1.35V (with 1.5V compatibility) and is housed in a 96-ball FBGA package (PBGA96). This memory device is designed for high-speed data transfer with a data rate of 1600 Mbps (PC3L-12800), featuring a CAS latency of 11 and a tRCD/tRP of 11. The device supports on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4 (with burst chop). It is compliant with the JEDEC DDR3L standard, ensuring interoperability with a wide range of controllers. DDR3L SDRAM is a type of synchronous dynamic random-access memory that transfers data on both edges of the clock signal, effectively doubling the data rate. It is a low-voltage variant of DDR3, operating at 1.35V instead of 1.5V, which reduces power consumption by approximately 15-20% compared to standard DDR3. DDR3L is part of the DDR SDRAM family, which includes DDR, DDR2, DDR3, and DDR4, and is widely used in computing, networking, and embedded systems. The low-voltage operation makes it ideal for power-sensitive applications such as laptops, servers, and industrial electronics. Key features of the H5TC4G63AFR-PBR include a 16-bit I/O interface, 8 internal banks, and a burst length of 8 (BL8) with burst chop (BC4). It supports auto refresh and self refresh modes, with a refresh interval of 7.8us at 85C and 3.9us at 95C. The device has a programmable output driver impedance and on-die termination for improved signal integrity. It also features a temperature-compensated self-refresh (TCSR) and a partial array self-refresh (PASR) for power savings. The package is a 96-ball FBGA with a 0.8mm ball pitch, measuring 13.5mm x 9.0mm, and is RoHS compliant. Technically, the H5TC4G63AFR-PBR uses a CMOS process and supports a clock frequency up to 800 MHz (DDR3L-1600). It has a tCK of 1.25ns and a tRCD of 13.125ns. The device includes a mode register set (MRS) for configuration and supports write leveling and read leveling for improved signal integrity. The I/O interface is SSTL-15 compatible, and the device supports a data strobe (DQS) differential pair. The memory is organized into 8 banks of 32M x 16, providing a total capacity of 4Gb. The device is designed for high-reliability applications and is available in a lead-free, halogen-free package. Typical applications for the H5TC4G63AFR-PBR include embedded systems, networking equipment (routers, switches), industrial PCs, and consumer electronics such as set-top boxes and smart TVs. Its low-voltage operation and high density make it suitable for memory-intensive applications where power efficiency is critical. The device is also used in automotive infotainment systems and medical devices that require reliable, high-speed memory. When designing with this device, ensure proper decoupling capacitors (0.1uF and 1uF) are placed near the VDD and VDDQ pins to minimize noise. The VREFCA and VREFDQ should be bypassed with 0.1uF capacitors. The device requires a stable 1.35V supply and a separate 1.35V VDDQ supply. For optimal signal integrity, route the DQ, DQS, and address lines with matched trace lengths and controlled impedance (typically 50 ohms single-ended, 100 ohms differential).

USD $5,91 Contact
H5TC4G63CFR-H9A - 4Gb DDR3L SDRAM 96-FBGA | SK hynix
H5TC4G63CFR-H9A

H5TC4G63CFR-H9A - 4Gb DDR3L SDRAM 96-FBGA | SK hynix

The H5TC4G63CFR-H9A is a 4Gb DDR3L SDRAM manufactured by SK hynix, organized as 256M x 16 bits. It operates at a low voltage of 1.35V (VDD=VDDQ=1.35V + 0.100 / - 0.067V), enabling power-efficient main memory solutions. The device is housed in a 96-ball TFBGA package, providing a compact footprint for space-constrained designs. It is lead-free and halogen-free, fully RoHS compliant, and supports a temperature range suitable for commercial and industrial applications. DDR3L SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by up to 20% while maintaining backward compatibility with DDR3 environments. It is part of the DDR3 memory family, which uses double data rate architecture to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is widely used in laptops, embedded systems, and networking equipment where energy efficiency is critical. Key features include fully differential clock inputs (CK, CK), differential data strobe (DQS, DQS), and an on-chip DLL that aligns DQ, DQS, and DQS transitions with CK transitions. The DM (data mask) function masks write data at both rising and falling edges, ensuring data integrity. The device supports burst lengths of 8 and 4 (with burst chop), and features programmable CAS latency and additive latency for flexible timing. The H5TC4G63CFR-H9A is designed for high-bandwidth, low-power main memory applications. Its 4Gb density and x16 organization make it ideal for applications requiring large memory capacity with a moderate bus width. The 96-ball TFBGA package offers excellent thermal and electrical performance, with a ball pitch of 0.8mm, facilitating high-density PCB layouts. Typical applications include laptops and ultrabooks, embedded computing, networking switches and routers, and industrial automation systems. The low operating voltage and high bandwidth make it suitable for battery-powered devices and energy-conscious designs. When designing with this component, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins to minimize noise. The device requires a stable 1.35V supply and careful signal integrity management for the high-speed data bus. Refer to the datasheet for detailed timing parameters and PCB layout guidelines.

Devis Contact
H5TC4G63CFR-H9I - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63CFR-H9I

H5TC4G63CFR-H9I - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63CFR-H9I is a 4Gb DDR3L SDRAM from SK hynix, organized as 256M x 16 bits. It operates at a low voltage of 1.35V, reducing power consumption by about 15% compared to standard DDR3 (1.5V). The device is housed in a 96-ball TFBGA package and is designed for industrial temperature range (-40°C to +95°C). It is lead-free and halogen-free, compliant with RoHS. DDR3L SDRAM is a type of dynamic random-access memory that uses double data rate architecture, transferring data on both edges of the clock. It is a key component in computing systems, providing high bandwidth and low power operation for main memory applications. The H5TC4G63CFR-H9I is part of the DDR3L family, which is widely used in servers, networking equipment, and embedded systems. Key features include a 4Gb density, 16-bit data bus, and support for data rates up to 1866 Mbps (PC3-14900). The device operates from a 1.35V supply, with an I/O voltage of 1.35V. It features programmable CAS latency, burst lengths of 8 and 4, and on-die termination (ODT) for improved signal integrity. The industrial temperature grade ensures reliable operation in harsh environments. The H5TC4G63CFR-H9I uses a high-performance CMOS process and advanced circuit design to achieve fast access times and low power consumption. It includes auto-refresh and self-refresh modes to minimize power in standby. The TFBGA package provides excellent thermal and electrical performance, making it suitable for space-constrained designs. Typical applications include main memory for industrial PCs, networking routers, and embedded computing modules. Its low voltage and industrial temperature range make it ideal for applications requiring reliability and energy efficiency. When designing with this device, ensure proper decoupling and signal integrity practices are followed. The DDR3L interface requires careful PCB layout to maintain signal quality at high speeds.

Devis Contact
H5TC4G63CFR-H9J - 4Gb DDR3L SDRAM 96-Ball TFBGA | SK Hynix
H5TC4G63CFR-H9J

H5TC4G63CFR-H9J - 4Gb DDR3L SDRAM 96-Ball TFBGA | SK Hynix

The H5TC4G63CFR-H9J is a 4Gb DDR3L SDRAM from SK Hynix, organized as 256M x 16, operating at a nominal supply voltage of 1.35V (VDD=VDDQ=1.35V +0.100/-0.067V). It is housed in a 96-ball TFBGA (Thin Fine-Pitch Ball Grid Array) package with a rectangular body, designed for high-density main memory applications requiring low power and high bandwidth. The device is lead-free and halogen-free, compliant with RoHS regulations, and supports industrial temperature grades. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by approximately 20-30% while maintaining similar performance. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both rising and falling edges of the clock, and is widely used in servers, networking equipment, and embedded systems where power efficiency is critical. Key features include fully differential clock inputs (CK, CK) for improved signal integrity, differential data strobes (DQS, DQS) for precise data capture, and an on-chip DLL that aligns DQ, DQS, and DQS transitions with the CK transition. The DM (Data Mask) function masks write data on both rising and falling edges, enabling byte-level write operations. The device supports industrial temperature range, making it suitable for harsh environments. Technically, the H5TC4G63CFR-H9J utilizes a CMOS process and features a 4-bit prefetch architecture typical of DDR3, achieving data rates up to 1866 Mbps (PC3-14900) at the -H9 speed grade. The 96-ball TFBGA package provides excellent thermal and electrical performance, with a compact footprint for space-constrained designs. The device is designed for high reliability and low power operation, with support for on-die termination (ODT) and programmable CAS latency. Typical applications include main memory for industrial PCs, networking routers and switches, embedded computing modules, and high-performance storage systems. The low voltage and high density make it ideal for power-sensitive applications where battery life or thermal management is a concern. When designing with this device, ensure proper decoupling of the VDD and VDDQ supplies with 0.1uF and 1uF capacitors placed close to the balls. Follow the PCB layout guidelines in the datasheet for signal integrity, especially for the differential clock and data strobe pairs.

Devis Contact
H5TC4G63CFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63CFR-PBA

H5TC4G63CFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63CFR-PBA is a 4Gb DDR3L SDRAM organized as 256M x 16, manufactured by SK Hynix. It operates at VDD=VDDQ=1.35V with a tolerance of +0.100/-0.067V, enabling low-power operation for mobile and embedded systems. The device is housed in a 96-ball FBGA package (PBGA96) and is lead-free and halogen-free, fully RoHS compliant. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that operates at 1.35V, reducing power consumption by about 20% compared to standard DDR3 (1.5V). It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, and is widely used in computing, networking, and industrial applications where power efficiency is critical. Key features include fully differential clock inputs (CK, CK) for improved signal integrity, differential data strobe (DQS, DQS) for precise data capture, and an on-chip DLL that aligns DQ, DQS, and DQS transitions with CK. The DM (data mask) function masks write data on both rising and falling edges, and the device supports auto precharge, auto self-refresh, and dynamic on-chip termination (ODT) for signal quality. The H5TC4G63CFR-PBA uses a CMOS process and includes ZQ calibration for output driver and ODT impedance matching, write leveling for command/address timing, and asynchronous reset for initialization. These features ensure reliable high-speed operation and simplify system design. Typical applications include DDR3L memory modules for laptops, embedded systems, networking equipment (routers, switches), and industrial PCs. Its low voltage and high density make it ideal for power-sensitive designs. When designing with this device, ensure proper decoupling and follow the PCB layout guidelines in the datasheet to maintain signal integrity at high frequencies. The device requires a stable 1.35V supply and careful termination of the differential clock and strobe lines.

USD $6,23 Contact
H5TC4G63CFR-PBL - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63CFR-PBL

H5TC4G63CFR-PBL - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63CFR-PBL is a 4Gb DDR3L SDRAM (Double Data Rate 3 Low Voltage) memory chip from SK hynix, organized as 256M x 16 bits. It operates at a low voltage of 1.35V, making it ideal for power-sensitive applications such as mobile devices, embedded systems, and networking equipment. The device is available in a 96-ball FBGA package (TFBGA) and is lead-free and halogen-free, complying with RoHS standards. DDR3L SDRAM is a type of synchronous dynamic random-access memory that transfers data on both edges of the clock signal, doubling the data rate compared to single data rate SDRAM. The 'L' denotes low voltage operation at 1.35V, reducing power consumption by about 15% compared to standard DDR3 at 1.5V. This makes DDR3L a preferred choice for battery-powered and thermally constrained designs. Key features of the H5TC4G63CFR-PBL include a data rate of 1600 Mbps (PC3L-12800), a burst length of 8, and support for on-die termination (ODT) and posted CAS. The device also features auto refresh and self refresh modes, with a typical refresh period of 7.8 us at 85C. The 96-ball FBGA package provides a compact footprint suitable for high-density PCB layouts. The H5TC4G63CFR-PBL uses a high-performance CMOS process technology, ensuring fast access times and low power consumption. The memory array is organized into 8 banks, each with 32K rows, providing efficient row activation and precharge operations. The device supports a programmable CAS latency of 11, 12, and 13, allowing flexibility in system timing. Typical applications include main memory for laptops, ultrabooks, and embedded systems, as well as networking equipment such as routers and switches, and industrial automation controllers. The low voltage and high bandwidth make it suitable for applications requiring high memory density and low power. When designing with this device, ensure proper decoupling capacitors are placed near the VDD and VDDQ pins to minimize power supply noise. Also, follow the JEDEC DDR3L layout guidelines for signal integrity, especially for high-speed data lines.

Devis Contact
H5TC4G63CFR-xxI - 4Gb DDR3L SDRAM | SK Hynix
H5TC4G63CFR-xxI

H5TC4G63CFR-xxI - 4Gb DDR3L SDRAM | SK Hynix

The H5TC4G63CFR-xxI is a 4Gb DDR3L SDRAM manufactured by SK Hynix, designed for main memory applications requiring high density, high bandwidth, and low power operation at 1.35V. It operates with VDD=VDDQ=1.35V +0.100/-0.067V, features fully differential clock inputs (CK, CK), differential data strobes (DQS, DQS), and an on-chip DLL to align DQ, DQS, and DQS transitions with CK. The device is lead-free and halogen-free, RoHS compliant, and comes in a 78-ball FBGA package. DDR3L (Double Data Rate 3 Low Voltage) SDRAM is a type of synchronous dynamic random-access memory that achieves high data transfer rates by transferring data on both edges of the clock signal. It operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by about 20% while maintaining similar performance. DDR3L is part of the DDR3 memory family, which is widely used in computing, networking, and embedded systems. Key features include a 4Gb density organized as 512M x 8, a data rate of [DATA_NEEDED: speed grade] (e.g., 1600 Mbps), and support for 1.35V operation. The device uses an 8n-prefetch architecture, which enables high bandwidth by fetching 8 data words per clock cycle. It also supports on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4 (with burst chop). The H5TC4G63CFR-xxI is fabricated using advanced DRAM process technology, ensuring high reliability and low power consumption. The on-chip DLL synchronizes the output data with the clock, reducing skew and improving signal integrity. The device includes auto-refresh and self-refresh modes for low-power standby, and it supports temperature-compensated self-refresh (TCSR) to optimize refresh rate based on operating temperature. Typical applications include servers, networking equipment, industrial computing, and embedded systems where high memory density and low power are critical. The 1.35V operation makes it ideal for power-sensitive designs, such as laptops, portable devices, and energy-efficient data centers. When designing with this device, ensure proper decoupling of VDD and VDDQ with 0.1uF capacitors placed close to the pins. Follow the DDR3L layout guidelines for signal integrity, including matched trace lengths for DQ, DQS, and address/command signals. The device requires a stable 1.35V supply and a clean reference voltage (VREF) for optimal operation.

Devis Contact
H5TC4G63CFR-xxJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63CFR-xxJ

H5TC4G63CFR-xxJ - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63CFR-xxJ is a 4Gb DDR3L SDRAM manufactured by SK Hynix, organized as 256M x 16. It operates at a low supply voltage of VDD = VDDQ = 1.35V, making it ideal for power-sensitive applications such as mobile devices, embedded systems, and networking equipment. The device features fully differential clock inputs (CK, CK#), differential data strobes (DQS, DQS#), and an on-chip DLL that aligns DQ, DQS, and DQS# transitions with the CK transition. It is lead-free and halogen-free, compliant with RoHS standards. DDR3L SDRAM (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory that transfers data on both rising and falling edges of the clock signal, effectively doubling the data rate. DDR3L operates at 1.35V, reducing power consumption by about 20% compared to standard DDR3 (1.5V), while maintaining compatibility with DDR3 signaling levels. It is part of the memory hierarchy in computing systems, serving as main memory for processors, and is widely used in laptops, servers, and embedded applications. Key features include a 4Gb density, 16-bit I/O width, and support for various speed grades (e.g., -xxJ indicates a specific speed grade, likely 1600 Mbps or 1866 Mbps). The device uses a 96-ball FBGA package, which is standard for DDR3L SDRAM, ensuring compatibility with existing PCB designs. The operating temperature range is from 0°C to 95°C (case temperature), and it supports auto-refresh and self-refresh modes for power saving. Technically, the H5TC4G63CFR-xxJ employs an 8n-prefetch architecture, which allows high-speed data transfer by fetching 8 data bits per clock cycle per I/O. It includes programmable CAS latency, burst length (8 and 4 with burst chop), and on-die termination (ODT) for signal integrity. The device also supports write leveling and read leveling for improved timing margins in high-speed systems. Typical applications include main memory for laptops, ultrabooks, and embedded systems, as well as networking equipment like routers and switches, and industrial computing platforms. Its low voltage and high density make it suitable for power-constrained designs that require large memory capacity. When designing with this component, ensure proper decoupling capacitors near the VDD and VDDQ pins, and follow the DDR3L layout guidelines for signal integrity, including impedance matching and length matching for data and address lines. The device requires a stable 1.35V supply and a reference voltage (VREF) for the command/address bus.

Devis Contact
H5TC4G63CFR-xxL - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix
H5TC4G63CFR-xxL

H5TC4G63CFR-xxL - 4Gb DDR3L SDRAM 256Mx16 | SK Hynix

The H5TC4G63CFR-xxL is a 4Gb low power Double Data Rate III (DDR3L) Synchronous DRAM manufactured by SK Hynix. It is organized as 256M x 16 and operates at a low voltage of 1.35V, making it ideal for main memory applications that require large memory density, high bandwidth, and low power operation. The device is lead-free and halogen-free, compliant with RoHS standards, and is available in a 96-pin FBGA package. DDR3L SDRAM is a type of dynamic random-access memory that operates at a lower voltage (1.35V) compared to standard DDR3 (1.5V), reducing power consumption by approximately 20% while maintaining backward compatibility with DDR3-based environments. It is part of the DDR3 memory family, which uses double data rate signaling to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is commonly used in laptops, embedded systems, and networking equipment where power efficiency is critical. Key features of the H5TC4G63CFR-xxL include a 4Gb density, 256M x 16 organization, 1.35V power supply, and support for data rates up to 2133 Mbps (depending on the speed grade). The device offers low power consumption, with a typical operating current of [DATA_NEEDED: IDD0] and standby current of [DATA_NEEDED: IDD2P]. It also features on-die termination (ODT), programmable CAS latency, and burst lengths of 8 and 4 (with burst chop). The device is designed for reliable operation over a temperature range of [DATA_NEEDED: operating temperature range]. The H5TC4G63CFR-xxL utilizes advanced DRAM process technology, providing high density and performance while minimizing power consumption. The 96-pin FBGA package offers excellent thermal and electrical characteristics, supporting high-speed signaling with minimal parasitic inductance. The device includes auto-refresh and self-refresh modes to maintain data integrity with minimal power draw. Typical applications include main memory for laptops and ultrabooks, embedded systems, networking equipment, and industrial computing. The low voltage and high bandwidth make it suitable for power-sensitive designs that require high performance. The device is also used in memory modules and system-on-module (SoM) designs. When designing with this component, ensure proper decoupling capacitors are placed near the power pins to minimize noise. The DDR3L interface requires careful PCB layout to maintain signal integrity, including matched trace lengths and controlled impedance. Refer to the SK Hynix datasheet for detailed design guidelines and timing parameters.

Devis Contact
H5TC4G63MFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix
H5TC4G63MFR-PBA

H5TC4G63MFR-PBA - 4Gb DDR3L SDRAM 256Mx16 | SK hynix

The H5TC4G63MFR-PBA is a 4Gb DDR3L SDRAM organized as 256M x 16, manufactured by SK hynix. It operates at a supply voltage of 1.35V (VDD and VDDQ) with a range of +0.100V/-0.067V, and is housed in a 96-ball FBGA package. This memory device supports data rates up to 1866 Mbps (PC3L-14900) and is designed for low-power applications, offering a significant reduction in power consumption compared to standard DDR3. DDR3L SDRAM (Double Data Rate 3 Low Voltage) is a type of synchronous dynamic random-access memory that operates at 1.35V, reducing power consumption by about 20% compared to standard 1.5V DDR3. It is part of the DDR3 family, which uses double data rate architecture to transfer data on both edges of the clock, achieving high bandwidth. DDR3L is commonly used in mobile devices, embedded systems, and enterprise servers where power efficiency is critical. Key features include a 16-bit I/O configuration, 8 internal banks, and support for various burst lengths (BL8 and BL4 with burst chop). The device includes on-die termination (ODT), ZQ calibration, write leveling, and dynamic ODT for improved signal integrity. It also supports auto self-refresh and a temperature-compensated self-refresh rate to minimize standby power. The H5TC4G63MFR-PBA uses a 30nm-class process technology, enabling high density with low power. It features programmable CAS latency (CL), CAS write latency (CWL), and additive latency, allowing flexibility in system timing. The device is compliant with JEDEC DDR3L standards, ensuring interoperability with a wide range of controllers. Typical applications include mobile computing, networking equipment, industrial automation, and embedded systems where low power and high performance are required. Its 256Mx16 organization is ideal for systems needing a single high-density memory chip with a 16-bit data bus. When designing with this device, ensure proper decoupling capacitors near the power pins and follow the PCB layout guidelines in the datasheet to maintain signal integrity at high speeds. The device requires a stable 1.35V supply and careful termination of the address/control bus.

Devis Contact
H5TQ2G63GFR-TEC - 2Gb DDR3 SDRAM 128Mx16 FBGA-96 | SK Hynix
H5TQ2G63GFR-TEC

H5TQ2G63GFR-TEC - 2Gb DDR3 SDRAM 128Mx16 FBGA-96 | SK Hynix

The SK Hynix H5TQ2G63GFR-TEC is a 2 Gigabit DDR3 SDRAM organized as 128M x 16 bits, with industrial -40C to +95C operating temperature support, in a 96-ball FBGA (PBGA-96) lead-free, halogen-free RoHS-compliant package. DDR3 SDRAM (Double Data Rate 3 Synchronous DRAM) is a CMOS dynamic random-access memory that transfers data on both rising and falling edges of a differential clock, doubling bandwidth versus single-data-rate designs. Within the memory hierarchy it sits below DDR4/DDR5 generations and above DDR2, and it remains the dominant DRAM class for cost-sensitive industrial, networking, and embedded main-memory designs requiring large density and high bandwidth on a 1.5V-class interface. Key features of the H5TQ2G63 family include fully synchronous operation referenced to both clock edges, auto self-refresh, an auto precharge function, an asynchronous reset function, data mask (DM) support for byte-wise write masking, dynamic on-die termination (ODT), ZQ calibration for output impedance matching, and write leveling for fly-by topology signal integrity. The -TEC speed-grade suffix denotes an extended industrial temperature rating, making this variant suitable for uncontrolled-environment systems. Architecturally, the device contains multiple banks with row activation, column read/write pipelines, and burst lengths of 8 (BL8) with on-the-fly addressing, as described in the manufacturer datasheet. Source data identifies the related H5TQ2G63DFR parts as 2,147,483,648-bit CMOS DDR3 SDRAMs operating at up to 933 MHz clock (DDR3-1866 class), ideally suited for main memory applications requiring large memory density and high bandwidth. Typical applications include embedded main memory for industrial controllers, networking and communication equipment, set-top boxes, and FPGA-based processing boards that implement DDR3 memory controllers. The x16 organization simplifies 16-bit and 32-bit wide memory subsystems with two devices. Design consideration: DDR3 signal integrity depends on length-matched routing, ODT configuration via mode registers, and correct ZQ calibration resistor placement; follow the reference routing guidelines in the manufacturer datasheet. This page synthesizes distributor pricing, same-family drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet.

Devis Contact
H5TQ4G63AFR-H9C - 4Gb DDR3 SDRAM 256Mx16 | SK Hynix
H5TQ4G63AFR-H9C

H5TQ4G63AFR-H9C - 4Gb DDR3 SDRAM 256Mx16 | SK Hynix

The H5TQ4G63AFR-H9C is a 4Gb CMOS Double Data Rate III (DDR3) Synchronous DRAM from SK Hynix, organized as 256M x 16. It operates at a clock speed of 0.255ns (tCK) and is packaged in a 96-ball TFBGA (Thin Fine-Pitch Ball Grid Array) with a rectangular shape. This device is designed for main memory applications requiring high density and bandwidth, offering fully synchronous operations referenced to both rising and falling edges of the clock. It supports a supply voltage of 1.5V and features 8192 refresh cycles, ensuring data integrity in high-performance computing environments. DDR3 SDRAM (Double Data Rate Type 3 Synchronous Dynamic Random-Access Memory) is a type of memory that transfers data on both edges of the clock signal, effectively doubling the data rate compared to single-data-rate SDRAM. It is a key component in the memory hierarchy, serving as the main system memory in computers, servers, and embedded systems. DDR3 is the successor to DDR2 and offers higher bandwidth and lower power consumption, making it suitable for a wide range of applications from consumer electronics to enterprise data centers. Key features of the H5TQ4G63AFR-H9C include a 4Gb density, 256M x 16 organization, and a 96-ball TFBGA package. It is halogen-free and RoHS compliant, meeting environmental standards. The device operates with a 1.5V power supply and supports a data rate of 0.255ns (approximately 3.9 Gbps per pin). The refresh cycle count of 8192 ensures reliable operation over extended periods. The package is designed for surface mount technology, enabling compact and high-density PCB layouts. Technically, the H5TQ4G63AFR-H9C utilizes advanced CMOS process technology to achieve high speed and low power. It features programmable CAS latency, burst length, and other timing parameters via the mode registers, allowing system designers to optimize performance. The device supports on-die termination (ODT) and dynamic ODT for improved signal integrity, which is critical at high data rates. The 96-ball TFBGA package provides excellent thermal and electrical performance, with a ball pitch of 0.8mm, facilitating routing and manufacturing. Typical applications for the H5TQ4G63AFR-H9C include desktop and laptop computers, servers, networking equipment, and embedded systems that require high-capacity, high-bandwidth memory. Its 256M x 16 organization is ideal for systems with a 16-bit data bus, such as many microprocessors and SoCs. The device's low power consumption and high reliability make it suitable for both consumer and industrial applications. When designing with this DDR3 SDRAM, it is essential to ensure proper signal integrity by following the layout guidelines for high-speed memory interfaces, including controlled impedance traces, proper termination, and decoupling. The memory controller must be configured to match the device's timing parameters, such as CAS latency and burst length, to achieve optimal performance. Additionally, thermal management should be considered, as high-speed operation can generate significant heat.

USD $6,50 Contact
H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix
H9JCNNNBK3MLYR-N6E

H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix

The SK Hynix H9JCNNNBK3MLYR-N6E is a 16 Gb (2 GB) LPDDR5-6400 SDRAM organized as 512M x 32 with a 1.05 V core supply, housed in a 315-ball TFBGA package. It delivers a 6400 Mbps per-pin data rate over a dual-channel architecture, targeting high-bandwidth, power-sensitive mobile and embedded platforms. LPDDR5 (Low-Power Double Data Rate 5) is the fifth generation of the JEDEC low-power DRAM standard, positioned above LPDDR4X in the memory hierarchy: LPDDR5 SDRAM -> low-power DRAM -> DRAM -> volatile memory IC. Unlike standard DDR5 DIMM modules, LPDDR5 devices are soldered directly to the PCB, use a narrow 32-bit (x32) channel, and trade socketability for dramatically lower I/O power and a smaller footprint. The 1.05 V VDD2 rail is lower than the 1.1 V of LPDDR4X, which is the primary lever for reducing total memory power in battery-operated systems. Key differentiators of this part include its 6400 Mbps pin speed (a 33% uplift over LPDDR4X-4266), the 512M x 32 organization that maps cleanly onto 32-bit SoC memory controllers, and the TFBGA-315 ballout that is footprint-compatible across the SK Hynix LPDDR5 family. The device supports bank-group architecture and a low-power clock-stop mode for aggressive idle power reduction. Architecturally, the die uses SK Hynix's advanced 1-alpha-class DRAM process and integrates on-die termination (ODT), a programmable write-leveling scheme, and per-bank refresh to reduce peak current. The dual-channel x16+x16 internal split allows the controller to interleave accesses and hide refresh latency, which is critical for sustained bandwidth in AI inference and 4K video pipelines. Typical applications include flagship smartphones, automotive ADAS domain controllers, edge AI inference modules, 5G CPE and small cells, AR/VR headsets, and industrial machine-vision systems. In each case the 6400 Mbps rate and 1.05 V rail allow the SoC to hit its memory-bandwidth target without a discrete power penalty. A key design consideration is that LPDDR5 requires careful PCB trace-length matching and impedance control on the 32-bit data bus; unlike a DIMM, there is no module-level calibration, so signal integrity must be engineered at the board level. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $24,37 Contact
H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix
H9JCNNNBK3MLYR-N6E

H9JCNNNBK3MLYR-N6E - 16Gb LPDDR5-6400 SDRAM | SK Hynix

The SK Hynix H9JCNNNBK3MLYR-N6E is a 16 Gb LPDDR5-6400 SDRAM organized 512M x 32 on a 16-bit data bus, supplied in a 315-ball TFBGA (TFBGA-315) surface-mount package and rated for data rates up to 6400 Mbps. It operates from a 1.05 V main supply (range 1.01 V to 1.12 V) with a 1.7 V to 1.95 V rail for the DRAM array, and is qualified to industrial thermal envelopes typical of mobile and embedded platforms. The device belongs to the SK Hynix H9JCNNN family of LPDDR5 products targeting power-sensitive, high-bandwidth applications. An LPDDR5 SDRAM (Low-Power Double Data Rate 5 Synchronous DRAM) is a JEDEC-defined volatile memory standard optimized for mobile and embedded systems where bandwidth density and energy per bit are the dominant design constraints. LPDDR5 succeeds LPDDR4/4X by adding sub-channels, higher per-pin data rates (up to 6400 Mbps/pin in this -N6E speed grade), improved command/address efficiency via ECC-on-command and dynamic frequency scaling, and a deep-sleep state for idle retention. In the broader hierarchy LPDDR5 sits under DRAM -> volatile memory -> semiconductor memory -> integrated circuit, and competes architecturally with LPDDR5X and DDR5 in mobile SoC designs. Key features of the H9JCNNNBK3MLYR-N6E include 6400 Mbps per-pin data rate, dual 16-bit sub-channels for a 32-bit logical interface, on-die temperature sensor, refresh management, and WriteX/ReadX training features defined by the LPDDR5 standard. The 315-ball TFBGA package is designed for high-density PCB layouts with matched-length routing, supporting both mobile form factors and embedded module designs. The H9JCNNNBK3MLYR-N6E is typically designed into smartphone application processors, AI edge inference modules, tablet SoCs, and automotive infotainment platforms where sustained memory bandwidth must be delivered within tight thermal envelopes. Its low-voltage operation and deep-sleep states also make it suitable for always-on inference and wearable compute. When designing with this part, observe JEDEC LPDDR5 PCB layout guidelines: matched impedance for command/address and data lanes, length matching within a sub-channel, decoupling concentrated near the package, and a clean 1.05 V LDO/DC-DC rail. Verify pin-out against the official SK Hynix datasheet before board fab to confirm the -N6E ball map. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the SK Hynix datasheet, helping engineers validate BOM, footprint, and power budget decisions for LPDDR5-based designs.

USD $18,20 En stock
H9JCNNNBK3MLYR-N6E-SK - 16Gb LPDDR5-6400 SDRAM | SK Hynix | TFBGA-315
H9JCNNNBK3MLYR-N6E-SK

H9JCNNNBK3MLYR-N6E-SK - 16Gb LPDDR5-6400 SDRAM | SK Hynix | TFBGA-315

The SK Hynix H9JCNNNBK3MLYR-N6E-SK is a 16 Gigabit LPDDR5-6400 SDRAM organized as 512M x 32 in a 315-ball TFBGA surface-mount package, delivering up to 6400 Mbps per pin data rate over a 16-bit data bus. Operating from a 1.05 V core supply (rail range 1.01 V to 1.12 V) with a 1.7 V to 1.95 V supply for the I/O, it is engineered for high-bandwidth, power-sensitive mobile and embedded platforms. LPDDR5 (Low-Power Double Data Rate 5) SDRAM is a JEDEC-defined volatile memory standard designed as the successor to LPDDR4/4X for smartphones, tablets, ultra-thin notebooks, AI edge devices, and automotive infotainment. It belongs to the SDRAM -> DRAM -> volatile memory -> memory IC hierarchy. Compared with LPDDR4X, LPDDR5 doubles peak bandwidth to 6400 Mbps, introduces lower VDD voltages for energy efficiency, and adds on-die ECC and Decision Feedback Equalization (DFE) for signal integrity at high speeds. Key differentiating parameters include the 6400 Mbps data rate, 16-bit bus width, four-channel internal architecture, 1.05 V VDDQ, and an operating temperature range of -55C to +125C (industrial-grade, the widest grade in the H9JCNNN family). The device supports deep-sleep and power-down modes for sub-mW standby current. The 315-ball TFBGA package provides a low-profile footprint suitable for height-constrained mobile designs. The architecture is built on SK Hynix's advanced 1y-nm DRAM process, integrating the PMIC interface commands, frequency set, and refresh management defined by JEDEC JESD209-5. The dual-channel configuration enables parallel access for application processors, AI accelerators, and GPUs sharing the same memory pool. Built-in ECC mitigates single-bit soft errors at sub-20 nm nodes. Typical applications include flagship smartphone main memory, AI edge inference modules, ultra-thin notebook DRAM, automotive infotainment and ADAS platforms, and high-bandwidth industrial controllers. It pairs naturally with Snapdragon 8-series, MediaTek Dimensity, and Apple A-series application processors that natively support LPDDR5-6400 interfaces. Designers must route the 16-bit data bus as length-matched differential pairs with controlled impedance (typically 85 ohm differential), place a 0.1 uF + 1 uF decoupling capacitor network near each VDD/VDDQ ball, and follow SK Hynix reference PCB layout for the 315-ball TFBGA land pattern. The -SK suffix indicates SK Hynix branded reel/tray packaging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing engineering value beyond simple spec repetition.

Devis Contact
HA4-5002/883 - 110MHz Wideband Buffer Amplifier | Renesas
HA4-5002/883

HA4-5002/883 - 110MHz Wideband Buffer Amplifier | Renesas

The Renesas HA4-5002/883 is a monolithic, wideband, high slew rate, high output current buffer amplifier, qualified to MIL-STD-883 and housed in a 20-pin CLCC surface-mount package. It utilizes Intersil (formerly Harris) Dielectric Isolation technology to deliver 110 MHz of bandwidth, a typical slew rate of 1300 V/µs (1000 V/µs minimum), and a ±100 mA minimum output current capability enhanced by a 3 Ω output impedance. The 20-CLCC ceramic package makes it suitable for high-reliability military and aerospace programs that require hermetic packaging. A buffer amplifier (also called a unity-gain follower or current buffer) is a special-purpose analog building block placed between a high-impedance source and a low-impedance load. Buffers provide current gain without voltage gain, isolating upstream stages from load-induced disturbances such as cable capacitance, ADC input charge kickback, or laser diode nonlinear loading. In the broader taxonomy, the HA-5002 sits in the signal-chain hierarchy: sensor/transducer -> buffer -> ADC or driver -> downstream load. Buffer amplifiers complement operational amplifiers, which typically cannot source/sink the high peak currents needed for fast-settling, high-capacitance applications. Key features of the HA4-5002/883 include wideband 110 MHz operation, 1300 V/µs typical slew rate, ±100 mA minimum output current, 3 Ω output impedance, dielectric-isolation process for low parasitic latch-up susceptibility, and MIL-STD-883 Class B processing for high-reliability environments. The combination of speed and output drive makes it a classic choice for driving analog signals through long cables, laser diodes, and high-capacitance loads. Internally, the HA-5002 uses a complementary bipolar output stage with dielectric isolation, which prevents the substrate-junction latch-up common in junction-isolated high-current buffers. The wideband design uses local feedback and feedforward compensation paths that allow the closed-loop buffer to maintain flat gain and low distortion well past 10 MHz, even when driving 50 Ω or 100 Ω transmission lines. Typical applications include coaxial cable drivers, ADC front-end buffers, laser diode drivers, video line drivers, ATE (automatic test equipment) pin electronics, and reference buffers in precision instrumentation. Its MIL-STD-883 qualification also makes it suitable for avionics, missile guidance, and space-grade subsystems where commercial-grade plastic op amps are unacceptable. When designing with the HA4-5002/883, observe the thermal limitations of the 20-CLCC package: continuous ±100 mA output into a low impedance load produces noticeable self-heating, and supply bypassing must be placed immediately at the supply pins to sustain the high slew rate without ringing. This page synthesizes distributor pricing, drop-in and pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers quickly evaluate the HA4-5002/883 for new designs and legacy sustainment.

Devis Contact
HC32L031 - 48MHz Cortex-M0+ 64KB Flash MCU | XHSC (小华)
HC32L031

HC32L031 - 48MHz Cortex-M0+ 64KB Flash MCU | XHSC (小华)

The XHSC (小华半导体) HC32L031 is a 32-bit ultra-low-power microcontroller based on the Arm Cortex-M0+ core running up to 48 MHz, integrating 64 KB of Flash and 8 KB of SRAM in compact LQFP-32 and QFN-32 (4x4 mm) packages. It operates from a wide 1.8 V to 5.5 V supply, making it suitable for both battery-powered and industrial 5 V rails. A low-dropout (LDO) linear regulator is an analog integrated circuit that maintains a tightly regulated output voltage even when the input-to-output voltage difference is small (the dropout voltage). LDOs belong to the broader family of linear regulators, which in turn are a subset of voltage regulators and power management ICs used in virtually every powered electronic system. The HC32L031 sits one level above: it is a microcontroller that *uses* internal LDOs to power its core and analog domains from a single external supply. Key differentiating features include a deeply engineered power management system with 0.65 µA Deep-Sleep current (all clocks off, IO retention, IO interrupt wake-up, full RAM/CPU state retention) and 45 µA/MHz active current at 3 V / 48 MHz with peripherals off. The device includes multiple low-power modes, an integrated LDO regulator, and Brown-Out Reset (BOR). Peripheral highlights include a 12-bit SAR ADC, multiple timers, UART, SPI, I²C, and an integrated LCD segment driver (variant dependent), making it highly competitive in metering and HMI applications. Architecturally, the HC32L031 leverages the Cortex-M0+ core (Thumb-2 instruction set, single-cycle IO) and pairs it with a high-efficiency on-chip voltage regulator to minimize dynamic power. The Flash is organized with erase/write protection to support secure in-field firmware updates. Typical applications include battery-powered IoT sensors, smart water/gas/heat meters, wearable health devices, low-power wireless sensor nodes, BLE/Zigbee beacon peripherals, electronic shelf labels, and consumer appliances requiring always-on sensing with multi-year battery life. Its wide 1.8 V–5.5 V input range also suits industrial 5 V control boards. When designing with the HC32L031, select the package variant (LQFP-32 F8TB or QFN-32 F8UB) that matches your PCB footprint and thermal target. Pay attention to decoupling: place 100 nF + 4.7 µF ceramic capacitors close to VDD/VSS pins to keep the internal LDO stable during load transients. This page synthesizes distributor pricing, package variants, drop-in alternatives, and practical design notes not consolidated in any single manufacturer datasheet, providing actionable engineering value for selection and procurement.

Devis Contact
HCF4046M013TR - Micropower PLL, 1.4MHz, SOIC-16 | STMicroelectronics
HCF4046M013TR

HCF4046M013TR - Micropower PLL, 1.4MHz, SOIC-16 | STMicroelectronics

The STMicroelectronics HCF4046M013TR is a Micropower Phase-Locked Loop (PLL) IC operating at up to 1.4 MHz, housed in a 16-pin SOIC (0.154", 3.90mm width) package. It features quiescent current specified to 20V, very low power consumption of 70 µW (typ.) at VCO = 5V, and operating frequency range to 1.4 MHz (typ.) at VDD = 10V. The device also includes low frequency drift of 0.04%/°C (typ.) at VDD = 10V and a choice of two phase comparators: an exclusive-OR (XOR) detector and an edge-triggered sequential phase detector with charge pump output. A Phase-Locked Loop (PLL) is a closed-loop feedback system that generates an output signal whose phase is locked to the phase of an input reference signal. PLLs are widely used for frequency synthesis, modulation/demodulation, clock recovery, and tone decoding in analog and mixed-signal systems. As a member of the CMOS 4000-series logic family, the HCF4046 sits within the broader hierarchy of clock and timing integrated circuits (ICs), which also include phase-locked loops, frequency synthesizers, and clock generators. The 4046 architecture in particular is the industry-standard micropower PLL, with variants offered by multiple manufacturers. Key features of the HCF4046M013TR include a wide supply voltage range of 3V to 20V, very low quiescent current well-suited for battery-powered designs, two selectable phase comparators (Phase Comparator I for low-noise locking without dead zone, Phase Comparator II for high-noise rejection with a charge-pump output capable of driving low-pass filters), an on-chip linear VCO with external R/C tuning, and source-follower output buffer. The combination of low power, wide supply range, and dual phase comparators makes the device uniquely flexible among monolithic PLL ICs. The HCF4046 employs a CMOS architecture with an internal VCO whose gain is set by external resistor R1 and capacitor C1, and whose frequency offset is set by external R2 and C2. Phase Comparator I is an exclusive-OR gate offering low harmonic content in the locked condition but requiring 90° phase offset at the VCO input. Phase Comparator II is an edge-triggered sequential network that locks at zero phase error, allowing the loop to operate with arbitrary input duty cycles and providing a charge-pump output for direct connection to an external low-pass filter. The micropower CMOS design keeps dynamic supply current low even at maximum VCO frequency. Typical applications include FM demodulation and modulation, frequency synthesis, tone decoding, FSK (Frequency-Shift Keying) modems, motor speed control, and clock recovery from NRZ data. The wide supply range (3V to 20V) allows the device to operate directly from battery stacks, 5V logic rails, and ±15V analog supply rails with a single part number. When designing with the HCF4046M013TR, pay close attention to the loop-filter component selection, as it directly determines loop bandwidth, capture range, and lock time. Phase Comparator I requires 50% duty cycle signals for proper operation, whereas Phase Comparator II can handle any duty cycle. Bypass VDD with a 0.1 µF ceramic capacitor placed close to the IC pins to ensure clean supply rails. This page consolidates distributor pricing, verified pin-compatible drop-in alternatives, and practical loop-filter design guidance drawn from multiple sources rather than from the manufacturer datasheet alone.

Devis Contact
HCF4093BE - Quad 2-Input NAND Schmitt Trigger | STMicroelectronics
HCF4093BE

HCF4093BE - Quad 2-Input NAND Schmitt Trigger | STMicroelectronics

The STMicroelectronics HCF4093BE is a CMOS quad 2-input NAND gate with Schmitt-trigger inputs, supplied in a 14-pin PDIP through-hole package. Each of the four independent gates performs the NAND function while exhibiting Schmitt-trigger hysteresis on both inputs, allowing slow or noisy edges to be cleaned into sharp, jitter-free logic transitions. The Schmitt trigger is a comparator-style input stage with two distinct switching thresholds: a higher positive-going threshold (VP) and a lower negative-going threshold (VN). The difference between them (VH = VP - VN) is defined as the hysteresis voltage. This built-in hysteresis makes the part ideal for conditioning slow analog or mechanical signals (RC oscillators, switch debouncing, sensor pulses) directly into clean logic levels without external comparators. The HCF4093 belongs to the 4000-series CMOS logic family, characterized by wide supply operation from 3 V to 18 V, low quiescent power consumption, and high noise immunity. Its four gates share common VDD and VSS pins. Each input is a standard CMOS inverter-style stage feeding a NAND tree, and outputs are buffered totem-pole drivers capable of sourcing/sinking typical 4000-series currents. As a CMOS part, all inputs include ESD-protection networks and should not be left floating. Typical applications include waveform and pulse shaping, monostable and astable multivibrators, line receivers for noisy environments, simple RC and crystal oscillators, and debounce circuits for mechanical switches. Hysteresis prevents multiple triggering on bouncing or slowly rising edges, eliminating the need for external Schmitt-trigger comparator stages. When designing with this device, observe standard CMOS handling: tie unused inputs to VDD or VSS (never leave them open) and place a 0.1 uF decoupling capacitor as close as possible to the VDD pin. Output drive capability is moderate (a few mA), so check fan-out when driving multiple loads or long traces.

Devis Contact
HCS361-I/P - KEELOQ Code Hopping Encoder, 8-PDIP | Microchip
HCS361-I/P

HCS361-I/P - KEELOQ Code Hopping Encoder, 8-PDIP | Microchip

The Microchip Technology HCS361-I/P is a code hopping encoder that pairs a 28-/32-bit programmable serial number with a 64-bit programmable encryption key to produce a 67-bit transmission frame (32-bit hopping code + 35-bit fixed code) for unidirectional Remote Keyless Entry (RKE) and access-control systems. Packaged in an 8-pin PDIP through-hole outline and rated for operation from 2.0 V to 6.6 V (per Microchip datasheet) or 3.0 V to 6.9 V (per some distributor listings), it ships as a -40 °C to +85 °C industrial-grade part with the “-I” temperature suffix and the “/P” PDIP package suffix. A code hopping encoder is a security-focused transmitter IC that transmits a different encrypted code on every button press, defeating simple replay attacks. It belongs to the broader category of encoders/decoders/multiplexers (logic ICs), and within Microchip's portfolio it is a member of the KEELOQ family — a hierarchy that runs encoder -> KEELOQ hopping encoder -> security transmitter IC -> logic IC -> integrated circuit. The HCS361 sits between the lower-cost HCS300/HCS301 and newer HCS362/HCS365 devices, balancing small package outline, low BOM cost, and patented hopping-code security. Key features include 28/32-bit serial number programming, 64-bit encryption key storage in EEPROM, unique 67-bit transmission per button event, three button inputs (S0/S1/S2), a 4-word (S0..S3 with PWM) option (per family datasheet), low standby current for battery-powered fobs, automatic code-word synchronization, and Microchip's patented KEELOQ learning algorithm so a paired receiver only needs to remember the last transmitted code. HCS361-I/P is the industrial temperature (-40 °C to +85 °C) variant in the through-hole PDIP-8 footprint. The device uses Microchip's KEELOQ nonlinear block-cipher algorithm with a 64-bit manufacturer key and a 16/20-bit discriminator. On every button press the encoder generates a fresh 32-bit hopping code by combining the counter value, the button bitmap, and the encrypted discriminator; the receiver validates the rolling counter and decrypts the discriminator before accepting the transmission, providing strong replay-attack immunity for garage-door openers, gate controls, alarm panels, and automotive RKE. Typical applications include garage-door and gate openers, automotive Remote Keyless Entry transmitters, wireless doorbells, alarm and security system keypads, asset-tracking fobs, and industrial access-control handheld remotes. Pair it with a Microchip HCS compatible receiver decoder (e.g., the receiver side of the HCS family) to complete a one-way secure link. When designing with the HCS361-I/P, observe the VDD decoupling guidance from the datasheet (a 0.1 µF ceramic cap close to the VDD pin), the RF section layout for the companion transmitter PCB, and the four-button debounce pattern in Microchip application notes. The industrial -40 °C to +85 °C range makes this part suitable for outdoor fobs and unheated enclosures, while the through-hole PDIP-8 package simplifies hand-soldering and prototype builds. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Devis Contact
HCTL-2001-A00 - CMOS Quadrature Decoder/Counter IC | Broadcom
HCTL-2001-A00

HCTL-2001-A00 - CMOS Quadrature Decoder/Counter IC | Broadcom

The Broadcom HCTL-2001-A00 is a CMOS quadrature decoder and counter interface IC designed to convert quadrature signals from a rotary encoder directly into a 32-bit digital count accessible to a host microcontroller. Housed in a 16-pin PDIP package, the device operates from a single 4.5V to 5.5V supply at up to 14 MHz clock frequency and integrates a digital noise filter, a 32-bit up/down counter, and an 8-bit three-state bus interface. It is specified for industrial temperature ranges of -40C to +85C and is intended to offload time-intensive quadrature-decoding tasks from microcontrollers in digital closed-loop motion-control systems. A quadrature decoder IC is a specialized interface that resolves two phase-shifted square-wave channels (often called CHA and CHB) from an incremental optical or magnetic rotary encoder into direction-aware digital position counts. This function sits in the motion-control signal chain between the encoder transducer and the host processor, where it replaces software decoding loops with deterministic hardware counting and noise rejection. Quadrature decoders belong to the broader family of sensor and detector interface ICs, with close relatives including incremental encoder counters, motion-control coprocessors, and motor-position feedback interfaces. Key features of the HCTL-2001-A00 include 32-bit counter resolution, programmable digital filtering on the quadrature inputs to reject noise below a configurable pulse-width threshold, an 8-bit multiplexed data bus with chip-select and read strobe, a cascade output for multi-axis chaining via the HCTL-2021, and a TTL/CMOS-compatible interface. The integrated noise filter eliminates the need for external RC debouncing on encoder channels and improves reliability in electrically noisy industrial environments such as stepper-servo drive cabinets and CNC machinery. The HCTL-2001-A00 is built on a low-power CMOS process with TTL-compatible inputs and three-state outputs, achieving 14 MHz internal operation while drawing only a few milliamps. The architecture separates noise-filtered quadrature decoding, the 32-bit latch, and the bus interface into independent functional blocks, allowing simultaneous count updates and host reads. The cascade architecture, when used with the HCTL-2021-A00 companion, supports longer word lengths or dual-axis counting without glue logic. Internally the chip implements a divide-by-n filter and a synchronized state machine that prevents missed counts at high encoder speeds. Typical applications include closed-loop servo motor position feedback, CNC machine tool axis encoders, robotics odometry wheels, digital input systems reading rotary selectors, printer and plotter carriage position tracking, and incremental-encoder-to-microprocessor interfaces in industrial automation. In a stepper-servo drive, the IC converts a 1000-line encoder into a precise 4000-count-per-revolution position word, freeing the MCU for trajectory and PID calculation rather than interrupt-driven counting. When designing with the HCTL-2001-A00, observe the layout guidelines in the Avago (now Broadcom) AV01-0041EN datasheet: place 0.1 uF decoupling close to VCC, keep encoder traces short and twisted-pair, and use the cascade signals when chaining with HCTL-2021 for longer count widths. Designers should also enable the noise filter at the highest practical time constant that still preserves the maximum encoder pulse width, balancing noise immunity against maximum countable shaft speed. This page synthesizes distributor stock data from DigiKey, Mouser, and Octopart, drop-in HCTL-20xx family alternatives, and practical design guidance not consolidated on the manufacturer datasheet.

Devis Contact