5CSXFC6C6U23C6N - Cyclone V SX SoC FPGA, 110K LE, 925MHz | Intel
Référence : 5CSXFC6C6U23C6N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $412 | $412,00 |
| 10 | $388.5 | $3 885,00 |
| 100 | $355 | $35 500,00 |
| 500 | $318.75 | $159 375,00 |
| 1 000 | $285 | $285 000,00 |
5CSXFC6C6U23C6N Présentation
A System-on-Chip (SoC) FPGA combines a hard processor subsystem with programmable logic on a single die, enabling deterministic hardware acceleration alongside a software runtime. The Cyclone V SX family sits inside Intel's broader programmable logic hierarchy: SoC FPGA -> FPGA -> Programmable Logic Device -> Semiconductor. The hard ARM Cortex-A9 dual core runs an OS or RTOS while the FPGA fabric implements custom datapath, signal processing, or interface glue logic, eliminating the need for a separate companion processor on the board.
Key features include 110K logic elements, embedded DSP blocks, embedded M10K and MLAB memory blocks, integrated transceivers supporting common serial protocols, hard memory controllers for DDR3, and a hard PCIe Gen2 endpoint. The part offers approximately 4,160 Kbits of embedded RAM and roughly 112 DSP blocks. Peripherals include EMAC, USB 2.0 OTG, NAND flash controller, SPI, UART, I2C, and GPIO routed through the HPS-to-FPGA bridge.
Typical applications include industrial machine vision, motor control, software-defined radio front ends, factory automation controllers, broadcast video processing, and automotive driver assistance prototypes. Designers choose this part when they need ARM Cortex-A9 software processing tightly coupled with parallel FPGA datapath on one die.
When designing with this device, pay close attention to UFBGA-672 PCB layout. The 23x23 mm package requires microvia or via-in-pad PCB technology for reliable BGA fanout. Use Intel's Quartus Prime design suite for synthesis, place-and-route, and HPS configuration. Plan for the 1.1 V core rail with adequate decoupling and thermal management under heavy DSP utilization.
This page synthesizes distributor pricing for 5CSXFC6C6U23C6N, drop-in same-package alternatives within the Cyclone V SX family, and practical design notes not consolidated in the Intel Cyclone V device datasheet alone.
Alternatives de remplacement direct pour 5CSXFC6C6U23C6N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 5CSXFC6C6U23C6N (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Logic Elements, Speed Grade, Process Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
5CSXFC6C6U23A7N
✅ Remplacement direct✓ En stock
$328.75 / unité
Voir la fiche technique →5CSXFC6C6U23C7N
✅ Remplacement direct✓ En stock
$215.8 / unité
Voir la fiche technique →5CSXFC6C6U23C8N
✅ Remplacement direct✓ En stock
$445 / unité
Voir la fiche technique →5CSXFC5C6U23C6N
✅ Remplacement direct✓ En stock
$175 / unité
Voir la fiche technique →5CSXFC4C6U23C6N
✅ Remplacement direct✓ En stock
$215.4 / unité
Voir la fiche technique →5CSXFC6C6U23C6N Valeurs maximales et caractéristiques électriques
| Series | Cyclone V SX SoC FPGA |
| Family | Cyclone V SX |
| Logic Elements | 110,000 |
| Processor Core | Dual ARM Cortex-A9 MPCore with CoreSight |
| Maximum Fabric Frequency | 925 MHz |
| Process Technology | 28 nm low-power |
| Core Supply Voltage | 1.1 V |
| Boîtier | 672-UBGA (UFBGA) 23x23 mm |
| Type de montage | Surface Mount (BGA) |
| Température de fonctionnement | 0 C to +85 C (commercial) |
| Number of I/O | 145 (per JAK Electronics comparison) |
| Embedded Memory | approximately 4,160 Kbits |
| DSP Blocks | approximately 112 |
| Statut RoHS | Compliant |
| Niveau MSL | 3 (per typical BGA handling) |
Guide de configuration des broches du 5CSXFC6C6U23C6N 672-ubga (ufbga) 23x23 mm
Configuration des broches du 5CSXFC6C6U23C6N (boîtier 672-ubga (ufbga) 23x23 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour 5CSXFC6C6U23C6N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
5CSXFC6C6U23C6N convient pour 6 applications: Industrial Machine Vision, Motor Control and Industrial Drives, Software Defined Radio Front End, Factory Automation Controllers, Broadcast Video Processing, Automotive ADAS Prototyping.
Industrial Machine Vision
The 5CSXFC6C6U23C6N fits industrial machine vision because the Dual ARM Cortex-A9 HPS runs the vision stack (OpenCV, Linux, image acquisition) while the 110K LE FPGA fabric implements parallel pixel pipelines, Bayer demosaicing, and object detection at line rate. The integrated HPS-FPGA AXI bridges deliver 128-bit data paths between the ARM cores and custom datapath, eliminating external processor-to-FPGA interconnect. The 672-UBGA package exposes sufficient GPIO and high-speed transceiver lanes to drive dual Camera Link or MIPI CSI-2 cameras simultaneously. Industrial temperature operation and the 28 nm low-power process suit 24/7 factory deployments.
Recommandé
Motor Control and Industrial Drives
The 5CSXFC6C6U23C6N is well matched to industrial motor control because the FPGA fabric executes field-oriented control (FOC), PWM generation, and encoder feedback at sub-microsecond latency, while the ARM Cortex-A9 HPS runs the higher-level motion profiler and EtherCAT/MODBUS stack. The approximately 112 DSP blocks provide ample multiply-accumulate throughput for the current-loop math, and the on-chip DDR3 controller streams parameter tables without external memory contention. The wide 145-I/O budget in UFBGA-672 supports three-phase inverter feedback and resolver excitation simultaneously.
Recommandé
Software Defined Radio Front End
The 5CSXFC6C6U23C6N supports software defined radio front ends because the FPGA fabric implements DDC/DUC, channelization filters, and digital predistortion at baseband sample rates, offloading the ARM Cortex-A9 HPS to handle network protocols and control plane. The Cyclone V SX fabric runs approximately 925 MHz internal performance, suitable for LTE and tactical radio baseband. Hard transceivers on the device family provide the SerDes lanes needed for ADC/DAC interfacing, while the HPS runs Linux for waveform configuration. Lower static power than Arria/Cyclone 10 GX parts makes it attractive for portable SDR.
Recommandé
Factory Automation Controllers
The 5CSXFC6C6U23C6N suits factory automation controllers because the dual ARM Cortex-A9 MPCore runs a deterministic RTOS or LinuxCNC for PLC logic and HMI, while the FPGA fabric implements deterministic EtherCAT, PROFINET, or EtherNet/IP slave nodes with hardware-cycle timing. The hard Ethernet MACs in the HPS simplify integration with industrial Ethernet stacks, and the abundant GPIO through the 672-UBGA package supports parallel field-bus signaling. The 28 nm low-power process reduces thermal load in sealed control cabinets, and the 110K LEs provide headroom for custom protocol extensions.
Recommandé
Broadcast Video Processing
The 5CSXFC6C6U23C6N handles broadcast video processing because the FPGA fabric implements SDI/HDMI bridging, color space conversion, and audio embedding at full 1080p60 rates without CPU intervention, while the ARM HPS handles control plane and metadata insertion. The DDR3 hard controller streams uncompressed video frames between FPGA logic and ARM memory, and the 4,160 Kbits embedded RAM provides line buffers for cross-conversion. The wide UFBGA-672 footprint exposes sufficient high-speed LVDS pairs for multi-channel SDI at 3 Gbps.
Recommandé
Automotive ADAS Prototyping
The 5CSXFC6C6U23C6N enables automotive ADAS prototyping because the dual ARM Cortex-A9 HPS runs sensor fusion and obstacle classification algorithms while the FPGA fabric implements low-latency radar FFT, lidar point-cloud clustering, and camera pre-processing. The Cyclone V SX architecture supports multiple sensor data streams in parallel, and the HPS-FPGA AXI fabric provides deterministic latency for safety-critical paths. Note that for production automotive designs, the Cyclone V automotive grade variant (typically designated by an A-speed grade or specific ordering code) is recommended over the commercial 5CSXFC6C6U23C6N.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5CSXFC6C6U23C6N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 5CSXFC6C6U23A7N | 5CSXFC6C6U23C7N | 5CSXFC6C6U23C8N | 5CSXFC5C6U23C6N | 5CSXFC4C6U23C6N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 672-UBGA (UFBGA) 23x23 mm | 672-UBGA (UFBGA) 23x23 mm - same | 672-UBGA (UFBGA) 23x23 mm - same | 672-UBGA (UFBGA) 23x23 mm - same | 672-UBGA (UFBGA) 23x23 mm - same | 672-UBGA (UFBGA) 23x23 mm - same |
| Family | Cyclone V SX | Cyclone V SX | Cyclone V SX | Cyclone V SX | Cyclone V SX | Cyclone V SX |
| Logic Elements | 110,000 | 110,000 | 110,000 | 110,000 | 85,000 (-23%) | 49,000 (-55%) |
| Processor Core | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 | Dual ARM Cortex-A9 |
| Speed/Temperature Grade | C6 (commercial) | A7 (automotive/industrial) | C7 (commercial, faster) | C8 (commercial, fastest) | C6 (commercial) | C6 (commercial) |
| Maximum Fabric Frequency | 925 MHz | 925 MHz | 925 MHz | 925 MHz | 925 MHz | 925 MHz |
Principaux différenciateurs
- Highest density SX SoC option at the C6 speed grade in the same UFBGA-672 footprint (vs 5CSXFC5C6U23C6N)
- Industrial/automotive temperature drop-in available in identical footprint (vs 5CSXFC6C6U23A7N)
- Cyclone V SX sub-family provides higher DSP count than SE alternatives (vs 5CSEBA6U23I7N)
Notes de conception
The 672-UBGA 23x23 mm package uses a 1.0 mm ball pitch, which requires microvia or via-in-pad PCB technology for reliable breakout. Use at least a 4-2-4 stacked-via construction with 0.4 mm laser-drilled microvias, and ensure the BGA land pads meet IPC-7095 nominal-diameter specifications. Plan for at least 6 PCB layers to route out 145 user I/O plus DDR3, transceivers, and clock signals without excessive via stubs. Decoupling must follow the Intel Cyclone V pin connection guidelines with bulk 220 uF polymer caps near each GPIO bank supply pin.
Estimated: at heavy DSP utilization consuming the full 110K LE fabric at approximately 85% toggle rate with all 112 DSP blocks active, the 5CSXFC6C6U23C6N dissipates approximately 3-5 W. With the UFBGA-672 theta-JA typically around 15-20 C/W on a JEDEC JESD51 4-layer test board, junction temperature rises 45-100 C above ambient. For closed-enclosure industrial designs, evaluate thermal performance in-system with thermocouples on the package top. Consider attaching a heatsink or thermal pad to the package top side if ambient temperature exceeds 60 C.
Three common pitfalls when designing with the 5CSXFC6C6U23C6N: (1) Forgetting to instantiate the HPS first-stage bootloader (preloader) before Linux boots - the HPS cannot boot without valid preloader code in QSPI or SD card. (2) Mixing 1.1 V core and 1.2 V transceiver supplies without proper sequencing - the Cyclone V datasheet mandates power-on sequence with the HPS core rail stable before FPGA fabric enters user mode. (3) Routing DDR3 signals without matching the 50 ohm impedance and length-matching per the Cyclone V external memory interface guidelines - failures here are notoriously hard to debug post-tapeout.
Informations de conformité
RoHS compliance per DigiKey product listing. C6 grade is commercial temperature; for AEC-Q100 automotive applications, choose the automotive-grade ordering variant or 5CSXFC6C6U23A7N for extended industrial/automotive temperature.
