Altera

EPM9560RZ208-15 - MAX 9000 EPLD, 560 Logic Elements | Altera

Référence : EPM9560RZ208-15 ✗ Fin de vie

En stock Expédié sous 1 à 3 jours ouvrés

5.0 V Vdss RQFP-208 (PowerQuad QFP) Package -15 (15 ns pin-to-pin delay) Speed

À partir de $55 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-13

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$85	$85,00
10	$76.5	$765,00
100	$68	$6 800,00
500	$61.2	$30 600,00
1 000	$55	$55 000,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

EPM9560RZ208-15 Présentation

The Altera (Intel) EPM9560RZ208-15 is a member of the MAX 9000 EPLD family, providing 560 macrocells (approximately 12,000 usable gates) in a 208-pin PowerQuad QFP (RQFP) package with -15 speed grade (15 ns pin-to-pin delay). It is built on a 0.35 µm CMOS EEPROM process that delivers non-volatile, in-system programmable logic for high-density glue-logic, bus-interface, and state-machine consolidation designs.

An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines the architectural simplicity of PAL/GAL with multi-macrocell arrays, in-system programmability via IEEE 1149.1 JTAG, and predictable timing. In the broader taxonomy, an EPLD is a sub-class of CPLD (Complex Programmable Logic Device), which itself sits between discrete PLDs and high-density FPGAs. MAX 9000 sits near the upper end of the CPLD density envelope offered in the late-1990s/early-2000s Altera portfolio, providing high I/O counts and predictable timing suitable for board-level glue logic.

Key features include 560 macrocells, 16 logic array blocks (LABs), 212 user I/O pins, 5V tolerant I/O on selected variants, in-system programmability (ISP) through JTAG, and a maximum toggle frequency of 100 MHz. The FastTrack interconnect provides continuous routing that yields fully deterministic, hazard-free timing — every path through the device has a guaranteed propagation delay independent of logic placement. Designers can therefore budget timing without floorplanning iterations.

The RQFP-208 package offers 208 pins with low profile suitable for socketed and surface-mount designs. With 212 user I/Os available in the package and high-drive capability on outputs, the EPM9560RZ208-15 is well suited for parallel bus interfaces, address decoding, memory control, and peripheral multiplexing tasks where multiple discrete 74-series devices would otherwise be required. The -15 speed grade delivers tPD = 15 ns, suiting 33 MHz synchronous designs.

Typical applications include legacy industrial control systems, telecommunications backplane glue logic, ISA/PCI bus address decoding, and microcontroller peripheral expansion. The wide I/O count and predictable timing also suit it for ASIC prototyping in designs that later migrate to structured ASIC or gate-array devices.

When designing with the EPM9560RZ208-15, note that the device is a mature part approaching end-of-life. Designers of new products should consider the Altera (Intel) MAX V, MAX II, or MAX 10 CPLD families, which offer lower power, smaller packages, and modern I/O standards. For legacy board replacement, verify pin compatibility with the original design footprint and review the datasheet's DC characteristics, particularly VCCIO banks and 5V tolerance.

This page synthesizes distributor pricing, drop-in alternatives from the MAX 9000 family, and practical design notes not consolidated in the manufacturer datasheet — giving sourcing engineers a single reference for both qualification and substitution decisions.

Alternatives de remplacement direct pour EPM9560RZ208-15 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EPM9560RZ208-15 (même facteur de forme et même empreinte) — différant par Package, Usable Gates, Architecture, Device Type, Configuration Memory.

EPM9400RC208-20

Altera

Package: 208-pin RQFP (28x28 mm)

Usable Gates: 8,000