BTG70902EPLXUMA1 vs BTS51202EKAXUMA1 तुलना
विस्तृत दोनों ओर की तुलना BTG70902EPLXUMA1 द्वारा Infineon और BTS51202EKAXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | BTG70902EPLXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Family | PROFET+2 12V | — |
| फ़ंक्शन | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| Input-to-Output Ratio | 1:1 | — |
| आउटपुट कॉन्फ़िगरेशन | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| करंट लिमिट | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | Yes (status feedback pin) |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| पैकेज | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| ऑपरेटिंग जंक्शन तापमान | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| RoHS स्थिति | Compliant | Compliant |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| टोपोलॉजी | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| ऑपरेटिंग तापमान | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |