BTG70902EPLXUMA1 vs BTS51202EKAXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTG70902EPLXUMA1 sa pamamagitan ng Infineon at BTS51202EKAXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ NakahandaInfineon
BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon
BTS51202EKAXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | BTG70902EPLXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Family | PROFET+2 12V | — |
| Fungsi | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| Input-to-Output Ratio | 1:1 | — |
| Output Kumpigurasyon | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Limit ng Current | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | Yes (status feedback pin) |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Packhaging | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Temperature ng Junction na Operasyon | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| Tindminan RoHS | Compliant | Compliant |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Topolohiya | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Temperature na Operasyon | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |