BTG70902EPLXUMA1 vs BTS51202EKAXUMA1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci BTG70902EPLXUMA1 disebabkan oleh Infineon dan BTS51202EKAXUMA1 disebabkan oleh Infineon. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktifPengandingan Spesifikasi
| Parametr | BTG70902EPLXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Family | PROFET+2 12V | — |
| Fungsi | Smart High-Side Power Switch | — |
| Number of Channels | 1 | 2 |
| Input-to-Output Ratio | 1:1 | — |
| Konfigurasi Output | N-Channel High-Side | — |
| Continuous Load Current | 2 A | — |
| Nominal Operating Voltage | 12 V (automotive bus) | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | — |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | — |
| Had Arus | Fixed (value not specified in retrieved data) | — |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | — |
| Diagnostic Output | DEN pin (current sense / fault flag) | Yes (status feedback pin) |
| Enable Input | IN pin (active-high) | — |
| Channel Select | DSEL pin | — |
| Slew Rate Control | Yes (internal, for EMI) | — |
| Kemasan | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Suhu Hubungan Operasi | -40 C to +150 C | — |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | — |
| Status RoHS | Compliant | Compliant |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Tetstruktur | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Suhu Operasi | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |