BTG70902EPLXUMA1 vs BTS51202EKAXUMA1 比較

詳細並排比較 BTG70902EPLXUMA1 由 Infineon 與 BTS51202EKAXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 BTG70902EPLXUMA1 BTS51202EKAXUMA1
品牌 Infineon Infineon
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Product Family PROFET+2 12V —
功能 Smart High-Side Power Switch —
Number of Channels 1 2
Input-to-Output Ratio 1:1 —
輸出配置 N-Channel High-Side —
Continuous Load Current 2 A —
Nominal Operating Voltage 12 V (automotive bus) —
Operating Voltage Range [DATA_NEEDED: Vbb operating range min/max] —
On-State Resistance (Ron) [DATA_NEEDED: Rdson typ/max in mohm] —
電流限制 Fixed (value not specified in retrieved data) —
Protection Features Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery —
Diagnostic Output DEN pin (current sense / fault flag) Yes (status feedback pin)
Enable Input IN pin (active-high) —
Channel Select DSEL pin —
Slew Rate Control Yes (internal, for EMI) —
封裝 PG-TSDSO-14 (exposed pad) PG-DSO-14-40-EP (14-pin SOIC with exposed pad)
工作接面溫度 -40 C to +150 C —
Automotive Qualification AEC-Q100 (PROFET+2 family targeted at automotive) —
RoHS 狀態 Compliant Compliant
安裝類型 Surface Mount Surface Mount
MSL 等級 [DATA_NEEDED: MSL rating per JEDEC J-STD-020] —
拓撲 — Dual High-Side Switch (2 channels)
Technology — Smart6 (N-channel vertical MOSFET with charge pump)
On-State Resistance (RDS(on)) — 120 mΩ (typical per channel)
Continuous Output Current — 2 A per channel (typical 2.5 A)
Operating Voltage (Vbb) — 8 V to 18 V
Load Type — Lamps up to 1×10 W, LEDs, resistive/inductive loads
工作溫度 — -40 °C to +150 °C
Maximum Power Dissipation — 1800 mW
Integrated Protection — Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery
Charge Pump — Integrated
Automotive Qualified — Yes

資料表與資源

瀏覽所有產品 建立 BOM 索取報價