XC7Z015-1CL485I - 74K Zynq SoC FPGA 667MHz | AMD
MPN: XC7Z015-1CL485I ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $210.1819 | $210.18 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
XC7Z015-1CL485I Overview
A Zynq-7000 SoC FPGA is more than a conventional FPGA: it combines a hard processor subsystem with programmable logic in one device. This heterogeneous architecture allows software tasks to run on the Arm processor while dedicated hardware accelerates parallel logic, interface, signal-processing, or control functions. The XC7Z015-1CL485I belongs to the Zynq-7000 family and is identified by the 74K logic-cell configuration.
Key verified characteristics include dual Arm Cortex-A9 MPCore processing, CoreSight debug support, 74K FPGA logic cells, 667 MHz operation, and a 484-CSPBGA package measuring 19 x 19 mm. These attributes make the part suitable for embedded systems that need both sequential software execution and programmable hardware. Its integrated architecture can reduce external component count compared with separate processor and FPGA implementations.
The device is supplied under the exact ordering code XC7Z015-1CL485I. The verified distributor records show product availability, pricing, inventory, and SoC FPGA descriptions, while the exact electrical limits, temperature ratings, memory interfaces, I/O standards, and power characteristics are not provided in the supplied data. Engineers should therefore verify the complete manufacturer datasheet and package pinout before finalizing a design.
Typical applications include industrial factory control, network-connected embedded systems, camera and image-processing front ends, robotics, communications equipment, and low-power edge computing. The processor subsystem is suitable for control software, networking stacks, and operating-system support, while the programmable fabric handles parallel datapaths, interfaces, or accelerators.
A critical design consideration is the dense BGA package and its many power, ground, and high-speed pins. PCB layout, decoupling, bank voltage planning, signal integrity, and thermal management must be developed against the official package information. This page summarizes verified distributor information and identifies parameters requiring manufacturer-data confirmation before release to fabrication.
This page combines exact distributor metadata, application guidance, package considerations, and sourcing information intended to help engineers evaluate XC7Z015-1CL485I efficiently while avoiding unsupported technical assumptions.
Drop-in alternatives for XC7Z015-1CL485I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC7Z015-1CL485I (same form factor and footprint) — differing in Architecture, Package.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
XC7Z015-1CLG485I
✅ Drop-In📋 Reference alternative (not in catalog)
XC7Z015-CLG485
✅ Drop-In📋 Reference alternative (not in catalog)
XC7Z015-L1CLG485I
✅ Drop-In📋 Reference alternative (not in catalog)
XC7Z015-CLG485I
✅ Drop-In📋 Reference alternative (not in catalog)
XC7Z015-1CL485C
✅ Drop-In📋 Reference alternative (not in catalog)
XC7Z015-2CLG485E
✅ Drop-In📋 Reference alternative (not in catalog)
XC7Z015-1CL485I Maximum Ratings & Electrical Characteristics
| Device Type | Zynq-7000 SoC FPGA |
| Processor Subsystem | Dual Arm Cortex-A9 MPCore |
| Debug Support | CoreSight |
| FPGA Logic Cells | 74K |
| Processor or Device Frequency | 667 MHz |
| Package | 484-CSPBGA |
| Package Dimensions | 19 x 19 mm |
| Package Type | CSPBGA |
| Manufacturer | AMD / Xilinx |
| Product Description | System On Chip (SoC) with dual ARM Cortex-A9 MPCore and Artix-7 FPGA |
| Architecture | Zynq-7000 |
| FPGA Family | Artix-7 |
| Logic Cell Count | 74K |
| Operating Frequency | 667 MHz |
| Mounting Style | Surface Mount |
XC7Z015-1CL485I cspbga Pin Configuration Guide
Pin configuration for XC7Z015-1CL485I (cspbga package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC7Z015-1CL485I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC7Z015-1CL485I is suitable for 6 applications: Industrial Factory Control, Industrial Network Gateway, Machine Vision and Image Processing, Robotics and Embedded Motion Systems, Communications Equipment, Camera and Sensor Edge Processing.
Industrial Factory Control
XC7Z015-1CL485I fits factory-control architectures that require real-time programmable logic alongside a higher-level Arm control path. The dual Cortex-A9 MPCore subsystem can run sequencing, communications, diagnostics, and supervisory software, while the 74K FPGA fabric can implement deterministic timing, encoder interfaces, interlocks, or parallel I/O. A practical design could partition control loops between fabric and software, reducing reliance on external programmable logic. The verified data confirms the processor count, 74K logic-cell class, and 667 MHz rating, but it does not specify operating temperature, I/O standards, or power limits. Those details must be validated in the official datasheet before the device is assigned to a production factory platform.
Recommended
Industrial Network Gateway
The XC7Z015-1CL485I is suitable for an embedded network gateway that needs protocol processing and hardware-assisted connectivity. The dual Arm Cortex-A9 cores provide software execution capacity for protocol stacks, management, logging, and security services, while the programmable logic can accelerate packet handling, frame checks, data acquisition, or peripheral bridging. A gateway design can place deterministic interface termination or custom hardware in the FPGA fabric and reserve the processor subsystem for network services. The supplied distributor data verifies the SoC architecture and 667 MHz rating but does not provide Ethernet MAC count, memory-interface details, or package pin assignments, so those specifications require confirmation from AMD documentation.
Recommended
Machine Vision and Image Processing
XC7Z015-1CL485I can support machine-vision systems where parallel pixel data must be handled efficiently alongside control software. The 74K programmable-logic fabric can implement capture interfaces, timing, filtering, thresholding, or data-format conversion, while the dual Arm Cortex-A9 subsystem can run camera control, buffering, diagnostics, and application logic. This division of labor can reduce the need for separate accelerator logic in compact industrial vision products. The verified source confirms 74K logic cells and 667 MHz operation, but it does not identify supported camera interfaces, DDR memory types, or maximum image throughput. Those details must be checked against the official Zynq-7000 device documentation and the selected board design.
Recommended
Robotics and Embedded Motion Systems
The XC7Z015-1CL485I is a plausible fit for robot and embedded motion controllers because it combines programmable hardware for deterministic timing with Arm cores for higher-level control. FPGA logic can implement motor-control timing, pulse generation, capture blocks, sensor fusion front ends, or safety interlocks, while the processor subsystem manages motion algorithms, communications, and diagnostics. The integrated architecture can help consolidate functions that would otherwise be divided between a microcontroller and a separate FPGA. However, the verified data does not specify motor-driver interfaces, isolated I/O, temperature range, or power-management requirements, so an industrial or safety-rated implementation must be checked against the manufacturer specifications and applicable system standards.
Recommended
Communications Equipment
XC7Z015-1CL485I can be used in communications equipment requiring programmable datapaths and embedded supervisory processing. The Arm cores can handle configuration, protocol management, logging, and control-plane functions, while the FPGA fabric can implement custom packet processing, data conversion, timing, or interface adaptation. This is useful when product requirements change faster than fixed-function ASIC development cycles. The verified records establish the Zynq-7000 SoC identity, dual Cortex-A9 architecture, 74K logic-cell class, and 667 MHz frequency, but do not specify transceiver interfaces, high-speed I/O standards, or protocol support. Those details must be validated from the AMD datasheet and the system’s signal-integrity requirements.
Recommended
Camera and Sensor Edge Processing
XC7Z015-1CL485I is suitable for edge-processing designs that combine sensor acquisition, local control, and programmable data acceleration. The FPGA fabric can handle deterministic sensor timing, parallel filtering, frame buffering assistance, or interface conversion, while the dual Arm cores can execute device management, calibration, networking, and higher-level inference or control functions. Combining these functions in one SoC can simplify the data path and reduce external component count. The verified data confirms the processor and logic resources but does not specify supported sensor interfaces, DDR capacity, image-processing throughput, or package-level signal mapping. Board-level feasibility therefore depends on the exact sensor, memory architecture, clocking plan, and manufacturer electrical specifications.
Recommended
Recommended Products Summary
Engineering reference data for XC7Z015-1CL485I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC7Z015-1CLG485I | XC7Z015-CLG485 | XC7Z015-L1CLG485I | XC7Z015-CLG485I | XC7Z015-1CL485C |
|---|---|---|---|---|---|---|
| Package | 484-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Architecture | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA | Zynq-7000 SoC FPGA |
Key Differentiators
- Integrated processor and programmable logic (vs XC7Z015-1CLG485I)
- 667 MHz verified device rating (vs XC7Z015-L1CLG485I)
- Distributor availability signal (vs XC7Z015-1CL485C)
Design Notes
Treat the 484-CSPBGA package as a high-density escape-routing and power-distribution problem. Before routing, obtain the official AMD package pinout and verify every power, ground, clock, configuration, and high-speed signal. Keep the BGA escape paths short, use a mechanically suitable PCB stack-up, and provide continuous or properly stitched ground planes. Do not infer pin locations from distributor package labels alone.
Plan the power architecture around the separate processor, programmable-logic, I/O, and auxiliary rails defined by the official Zynq-7000 documentation. The supplied data does not include voltage values or current limits, so regulator sizing must not be estimated from the 667 MHz or 74K logic-cell labels. Decoupling, sequencing, current sharing, startup behavior, and fault monitoring should be validated against the manufacturer power-supply requirements before schematic release.
The device combines a dual-core Arm subsystem with programmable FPGA logic, so power density can vary with utilization and I/O activity. Use the official thermal data for the selected package and speed grade, preserve thermal-pad or thermal-via requirements, and validate the assembled board with worst-case utilization and temperature testing. The supplied records do not provide thermal resistance, maximum junction temperature, or power dissipation, so a heatsink or airflow decision cannot be finalized from this data alone.
Separate deterministic clock, configuration, serial, and memory-related routes according to the official interface constraints. High-speed Zynq-7000 designs require controlled impedance, return paths, reference planes, and length management. Because the verified data does not identify the exact I/O standards, memory interfaces, or package pinout, signal-integrity simulation and pin assignment must be performed after the complete electrical specification is obtained.
Do not substitute related Zynq-7000 order codes solely because their snippets mention 74K logic cells and 667 MHz. Suffix changes can represent speed grade, temperature grade, package variant, or commercial status. Compare the full ordering table, package ballout, processor configuration, supported I/O, memory interfaces, and lifecycle status. In particular, the supplied results do not independently verify a pin-for-pin drop-in replacement for the 484-CSPBGA target.
Compliance Information
The verified data identifies AMD/Xilinx as the manufacturer but does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is marked not_applicable because this is an FPGA and SoC data category, not an automotive-qualified device claim.
