ATSAME70Q19A-CN - 300MHz Cortex-M7 MCU 512KB Flash LFBGA-144 | Microchip
MPN： ATSAME70Q19A-CN ✓ 啟用中ATSAME70Q19A-CN 概覽
An ARM Cortex-M7 microcontroller is a 32-bit RISC processor core designed for embedded systems that demand high computational throughput, deterministic interrupt latency, and DSP extensions. The Cortex-M7 sits at the top of the Cortex-M family hierarchy (Cortex-M7 -> Cortex-M -> ARMv7-M architecture -> 32-bit embedded processor), and supersedes Cortex-M4/M3 by adding a superscalar pipeline, branch prediction, and an integrated single/double-precision FPU. Microcontrollers based on the Cortex-M7 are commonly chosen over Cortex-M4 alternatives when applications require complex FFTs, audio codecs, motor-control loops, or high-speed graphics.
Key features include 300 MHz maximum CPU clock, 512 KB embedded Flash with prefetch cache, 256 KB SRAM, an external bus interface (EBI) supporting SDRAM, and a rich peripheral set: HS USB Host/Device with on-chip PHY, two CAN-FD controllers, three FLEXCOMs (USART/SPI/TWI), EMAC with 1588 PTP, a 12-bit 2 Msps ADC, a 12-bit DAC, and hardware crypto accelerators (AES, SHA, TRNG). The integrated FPU and DSP instructions allow DSP-grade signal processing without an external DSP chip.
The ATSAME70Q19A-CN architecture pairs the Cortex-M7 core with a multi-layer AHB/APB bus matrix, dedicated DMA (XDMAC) with 24 channels, and tightly-coupled memory ports that eliminate Flash wait states for time-critical routines. This combination of bandwidth, deterministic latency, and rich analog/digital peripherals enables single-chip implementation of motor-control, audio-processing, and industrial-automation designs.
Typical applications include industrial motor drives, audio processing and effects units, PLC communication modules, building automation controllers, smart energy gateways, and IoT edge nodes requiring TLS hardware acceleration. The hardware AES/SHA blocks make the device attractive for secured IoT endpoints.
A key design consideration: the LFBGA-144 footprint requires at least a 4-layer PCB with microvia fan-outs to reliably escape the 0.8 mm pitch ball array; a 2-layer board is not recommended for production designs.
直接替換替代品，適用於 ATSAME70Q19A-CN — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： ATSAME70Q19A-CN （相同外形與佔位） — 差異在於 ADC, Package, USB, Operating Temperature, SRAM.
ATSAME70Q20A-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAMS70Q19A-CN
✅ 直接替換📋 參考替代品（不在目錄中）
ATSAME70N21B-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70Q19A-AN
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →ATSAME70Q19A-CFNT
✅ 直接替換聯絡詢價
查看資料表 →ATSAME70Q19A-CN 最大額定值與電氣特性
| Core Architecture | ARM Cortex-M7 with FPU (single + double precision) |
| Maximum CPU Clock | 300 MHz |
| Flash Memory | 512 KB |
| SRAM | 256 KB |
| Operating Voltage (VDDCORE) | 1.2 V (typical) |
| I/O Voltage (VDDIO) | 3.3 V (typical) |
| 封裝 | 144-LFBGA (10x10 mm, 0.8 mm pitch) |
| 工作溫度 | -40C to +105C (industrial) |
| ADC | 12-bit, up to 2 Msps |
| DAC | 12-bit |
| USB | USB 2.0 High-Speed Host + Device with on-chip PHY |
| Ethernet | 10/100 Mbps MAC (GMAC) with 1588 PTP |
| CAN | 2x CAN-FD controllers |
| Serial Interfaces | 3x FLEXCOM (USART/SPI/TWI), 2x I2S, 2x SPI high-speed |
| DMA Channels | 24 (XDMAC) |
| Crypto Accelerator | AES, SHA, TRNG hardware blocks |
| External Bus Interface (EBI) | Yes (SDRAM, SRAM, NAND support) |
| 安裝類型 | Surface Mount (BGA) |
| MSL 等級 | 3 |
| RoHS 狀態 | Compliant |
ATSAME70Q19A-CN 144-lfbga (10x10 mm, 0.8 mm pitch) 腳位配置指南
ATSAME70Q19A-CN（144-lfbga (10x10 mm, 0.8 mm pitch) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： ATSAME70Q19A-CN.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATSAME70Q19A-CN 適用於 6 應用s: Industrial Motor Control, Audio Processing and Effects, Industrial Ethernet Gateway, Building Automation Controller, Secured IoT Edge Node, Human-Machine Interface (HMI).
Industrial Motor Control
The ATSAME70Q19A-CN's 300 MHz Cortex-M7 with FPU and DSP extensions, plus 12-bit 2 Msps ADC and dedicated PWM timers, fits field-oriented control (FOC) loops for 3-phase PMSM and BLDC motors. Per the SAM E70 datasheet, the PWM peripheral supports complementary outputs with 8 ns resolution, while the XDMAC offloads current-sample transfers. Combined with 256 KB SRAM and AES hardware crypto, the chip can run a 10 kHz control loop, encrypt CAN-FD telemetry, and still leave headroom for Ethernet-based industrial networking.
推薦
Audio Processing and Effects
Dual I2S ports, a 12-bit DAC, and the 300 MHz Cortex-M7 with DSP extensions make ATSAME70Q19A-CN suitable for digital audio effects units, headphone amplifiers, and stage-effect processors. The 256 KB SRAM holds audio buffers without off-chip memory, while the hardware FPU accelerates FFT and biquad cascade calculations at low latency. Compared to a discrete DSP + MCU design, the integrated architecture eliminates one chip and one clock domain, reducing BOM and EMI.
推薦
Industrial Ethernet Gateway
The ATSAME70Q19A-CN's integrated 10/100 Ethernet MAC with IEEE 1588 PTP, plus dual CAN-FD controllers, positions the part as a gateway between industrial fieldbus and IT networks. The 300 MHz core can run a TCP/IP stack (lwIP or equivalent), a TLS 1.3 client using the hardware AES/SHA accelerators, and a CANopen or Modbus handler concurrently. The 512 KB Flash accommodates a real-time OS such as FreeRTOS plus the networking stack.
推薦
Building Automation Controller
The HS USB Host port, SD/MMC host, dual CAN-FD, and 114 GPIO of ATSAME70Q19A-CN fit BACnet, KNX, or Modbus building-automation controllers that aggregate HVAC, lighting, and security data. The 512 KB Flash holds the protocol stack and the 256 KB SRAM handles concurrent sensor buffers. Industrial -40C to +105C temperature rating allows deployment in unconditioned electrical rooms without additional cooling.
推薦
Secured IoT Edge Node
The hardware AES, SHA, and TRNG blocks in ATSAME70Q19A-CN allow TLS 1.3 / Matter / secure-boot implementations without software crypto overhead, freeing the 300 MHz core for application logic. The HS USB and Ethernet peripherals support both wired and tethering connectivity, while 256 KB SRAM handles MQTT/CoAP message buffers. Hardware secure boot uses the embedded Flash's secure boot signature verification, mitigating firmware-cloning risks for connected-product deployments.
推薦
Human-Machine Interface (HMI)
With a 300 MHz core, hardware FPU, and EBI to external SDRAM, ATSAME70Q19A-CN drives TFT-LCD panels up to WVGA resolution via the integrated LCD controller, while the Cortex-M7's DSP accelerates PNG decompression and touch-gesture math. The 114 GPIO and three FLEXCOM ports parallelize SPI display, I2C touch, and UART debug links. Power consumption at 300 MHz is around 200 mA, manageable with a 5 V to 1.2 V buck regulator plus a small heatsink copper pour.
推薦
推薦產品摘要
工程參考資料，適用於 ATSAME70Q19A-CN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATSAME70Q20A-CN | ATSAMS70Q19A-CN | ATSAME70N21B-CN | ATSAME70Q19A-AN |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LFBGA (10x10 mm) | 144-LFBGA (10x10 mm) - same | 144-LFBGA (10x10 mm) - same | 144-LFBGA (10x10 mm) - same | 144-LQFP (20x20 mm) |
| Core / Clock | Cortex-M7 / 300 MHz | Cortex-M7 / 300 MHz | Cortex-M7 / 300 MHz | Cortex-M7 / 300 MHz | Cortex-M7 / 300 MHz |
| Flash | 512 KB | 1024 KB | 512 KB | 2048 KB | 512 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 384 KB | 256 KB |
| HS USB + EMAC | Yes / Yes | Yes / Yes | No / No (safety variant) | Yes / Yes | Yes / Yes |
| CAN-FD | 2x | 2x | 2x | 2x | 2x |
| Industrial Temp | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Crypto (AES/SHA/TRNG) | Yes | Yes | Yes | Yes | Yes |
主要差異化特點
- Integrated HS USB PHY eliminates external ULPI chip (對比ATSAMS70Q19A-CN)
- On-chip 10/100 EMAC with 1588 PTP (對比ATSAMS70Q19A-CN)
- Higher Flash density than older SAM S70Q19B-CN (對比ATSAME70Q20A-CN)
- Smaller footprint than LQFP equivalent (對比ATSAME70Q19A-AN)
設計說明
Estimated: The 144-LFBGA package uses a 0.8 mm ball pitch on a 10x10 mm body. Escape routing requires at minimum a 4-layer PCB (1 oz copper) with 0.4 mm laser-drilled micro-vias to fan out from the inner rows. Using a 2-layer PCB is not recommended for production designs because outer-row escape channels cannot accommodate GND/VDD planes without violating DRC spacing rules. Maintain a continuous GND plane directly under the BGA to reduce simultaneous-switching noise on the high-speed parallel bus.
Apply the SAM E70 datasheet's recommended decoupling scheme: a 4.7 uF bulk capacitor plus a 100 nF ceramic capacitor on every VDDIO pin pair, and a 4.7 uF + 100 nF combination on VDDCORE. The internal 1.2 V regulator is fed from VDDIO; if you disable the internal regulator to use an external 1.2 V LDO (recommended for EMI-sensitive designs), tie VREGCTRL to GND and provide a clean 1.2 V rail with at least 200 mA capacity. Hold NRST low until VDDIO and VDDCORE are both stable to prevent code corruption on startup.
A common ATSAME70Q19A-CN design mistake is assuming the HS USB PHY shares its 48 MHz clock with the EMAC; in fact, the USB PHY requires a dedicated 12 MHz crystal with tight tolerance (50 ppm or better) for USB compliance. Another pitfall is failing to enable the Cortex-M7's I-cache and D-cache properly through the memory-map registers (SCB) - leaving them off can drop benchmark performance by 30% or more. Always program the wait-state register on the EBI when interfacing SDRAM, otherwise bus contention will corrupt data on burst reads.
Estimated: At 300 MHz with all peripherals active, the ATSAME70Q19A-CN consumes roughly 200 mA from VDDCORE (1.2 V) plus 40 mA from VDDIO, totaling about 290 mW dissipation. The LFBGA-144 package thermal resistance is approximately 30 C/W to a 4-layer JEDEC EIA/JESD51 test board. Mount the BGA to a continuous 10x10 mm copper land pad (or a thermal via array) to keep junction rise below 10 C at room ambient. Forced airflow is recommended above 70 C ambient.
合規資訊
RoHS and lead-free per Microchip product page. AEC-Q100 not applicable - this is an industrial-grade MCU, not automotive-qualified; for automotive-grade SAM E70 variants check ATSAME70Q19B-CFN automotive part numbers.
