K6X1008C2D-TF55 - 1Mbit 128Kx8 SRAM 55ns 5V | Samsung
料号： K6X1008C2D-TF55 ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $3.2 | $3.20 |
| 10 | $2.95 | $29.50 |
| 100 | $2.75 | $275.00 |
| 500 | $2.5 | $1,250.00 |
| 1,000 | $2.35 | $2,350.00 |
K6X1008C2D-TF55 概述
An asynchronous static random access memory (SRAM) is a type of volatile semiconductor memory that stores each bit in a bistable latch circuit made of cross-coupled inverters. Unlike DRAM, SRAM requires no refresh cycles, and unlike synchronous memories such as SDRAM, it needs no clock: data is accessed whenever address and control signals (CE, OE, WE) are asserted. In the memory hierarchy, SRAM sits at the top for speed and simplicity, making it a staple in embedded systems, industrial controllers, and legacy 5 V buses.
Key features of the K6X1008C2D include the 55 ns address access time (tAA), a low operating current of 35 mA, and full CMOS technology delivering very low standby power. The byte-wide 128K x 8 organization maps directly onto 8-bit and 16-bit microprocessor external buses with simple glue logic.
The device is built on Samsung's advanced CMOS process, which keeps static power consumption minimal while maintaining fast, uniform access times across the full 4.5 V to 5.5 V industrial supply band. The REVERSE TSOP pinout (32-TSOP REVERSE) places pins in mirrored order versus standard TSOP, so footprint orientation must be checked during layout.
Typical applications include industrial PLC memory expansion, legacy networking equipment, telecom line cards, test instrumentation, and replacement/upgrades in service parts for 5 V embedded designs.
A key design consideration is supply tolerance: the part requires a regulated 5 V rail within 4.5 V to 5.5 V, so it cannot be dropped into 3.3 V systems without level shifting.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替换替代料： K6X1008C2D-TF55 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： K6X1008C2D-TF55 （相同外形与封装尺寸） ——差异在于 Package, RoHS Status, Memory Type, Memory Size, Organization.
快速对比工具——选择替代料号进行并排对比：
K6X1008C2D-GF55
✅ 直接替换📋 参考替代料（不在目录中）
K6X1008C2D-TF70
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
K6X1008C2D-TB55
✅ 直接替换📋 参考替代料（不在目录中）
M5M51008DVP-55HI
✅ 直接替换📋 参考替代料（不在目录中）
K6X0808C1D-BF55
✅ 直接替换✓ 有现货
$1.85 / 个
查看数据手册 →K6X1008C2D-TF55 最大额定值与电气特性
| 存储器类型 | SRAM - Asynchronous |
| 存储容量 | 1 Mbit |
| 存储组织 | 128K x 8 |
| Access Time (tAA) | 55 ns |
| 接口 | Parallel |
| Supply Voltage (Vcc) | 4.5 V to 5.5 V |
| Operating Current | 35 mA |
| Technology | Low Power Full CMOS |
| 封装 | 32-TSOP REVERSE |
| 安装类型 | Surface Mount |
| Speed Options | 55 ns, 70 ns |
| Memory Format | Volatile (SRAM) |
| Clock Frequency | N/A (asynchronous) |
| RoHS 状态 | RoHS: Yes (per distributor listing) |
K6X1008C2D-TF55 32-tsop reverse 引脚配置指南
K6X1008C2D-TF55（32-tsop reverse 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： K6X1008C2D-TF55.
请参阅 数据手册 以查看完整引脚配置。
典型应用
K6X1008C2D-TF55 适用于 6 应用s: Industrial PLC Memory Expansion, Legacy Telecom Line Cards, Test and Measurement Instrument Repair, Networking Equipment Service Parts, Battery-Backed Data Logging, Aerospace Ground Support & Legacy Avionics Maintenance.
Industrial PLC Memory Expansion
The K6X1008C2D-TF55 fits industrial programmable logic controllers that still run 5 V CPU boards with external parallel memory buses. Its 55 ns tAA keeps zero-wait-state access for 8-bit microprocessors clocked in the tens of MHz, and the 35 mA operating current stays within the budget of shared industrial 5 V rails. The byte-wide 128K x 8 organization maps one chip directly to a 1 Mbit parameter-table or ladder-logic storage region using only CE/OE/WE glue logic. Because the part is asynchronous, it needs no clock domain and simplifies EMC design in electrically noisy factory environments. When repairing legacy PLCs, the identical-footprint K6X1008C2D-GF55 variant allows drop-in substitution without PCB changes.
推荐
Legacy Telecom Line Cards
Telecom line cards designed in the 1990s commonly used 5 V asynchronous SRAM for call-state tables and firmware scratch memory, and the K6X1008C2D-TF55 matches those sockets exactly. The 4.5 V to 5.5 V supply band tolerates the voltage sag typical of backplane distribution, while 55 ns access time meets the timing of classic NPU/CPU chipsets on these cards. Full CMOS technology minimizes standby drain on always-powered rack equipment, an important thermal consideration when dozens of cards share one shelf. The 32-TSOP REVERSE package provides the compact surface-mount footprint these high-density cards require. Service organizations can keep racks alive by swapping in verified date-code stock or pin-compatible family variants.
推荐
Test and Measurement Instrument Repair
Bench multimeters, oscilloscope front-ends, and data loggers from the 5 V era store calibration constants and setup state in byte-wide SRAM, and the K6X1008C2D-TF55 is a common OEM choice. Its deterministic asynchronous timing means calibration routines written decades ago behave identically after replacement, with no controller or driver changes. The 35 mA operating current and CMOS standby suit battery-backed memory domains where a supercapacitor or lithium cell preserves contents during power-off. When refurbishing instruments, engineers should verify the REVERSE TSOP orientation against the original footprint, since standard and reverse pinout variants of 32-pin TSOP SRAMs were both used in this industry. Stocking 70 ns TF70 units as spares adds timing margin at identical footprint.
推荐
Networking Equipment Service Parts
Routers, switches, and CSU/DSU units from the 5 V generation used 1 Mbit asynchronous SRAM for routing tables and buffers, making the K6X1008C2D-TF55 a standard service replacement. The 55 ns access time supports the memory-cycle timing of legacy Motorola and Intel bus microprocessors common in that equipment, and the parallel interface requires no configuration - drop the chip in and the unit boots. Full CMOS construction keeps standby power low on equipment that runs 24/7, and the 4.5 V to 5.5 V tolerance absorbs midplane supply variation. Field engineers should qualify broker stock by date code and sample-test access timing, because EOL SRAM sourced from excess inventory occasionally shows degraded retention or speed bins.
推荐
Battery-Backed Data Logging
In data-logging and metering products, the K6X1008C2D-TF55 stores logged samples in a battery-backed domain, using its CMOS standby mode to stretch backup-cell life for months or years. The 128K x 8 organization gives 131,072 sample bytes of directly addressable storage, enough for substantial event histories without external addressing logic. Write protection is achieved simply by gating CE or WE with a power-fail signal, an approach compatible with the asynchronous interface and 5 V supervisor ICs already present in these designs. The 55 ns write-cycle timing comfortably handles burst logging from slow serial sensors. Because REVERSE TSOP orientation mistakes are destructive, layouts should include pin-1 polarity checks in ICT before battery connection.
推荐
Aerospace Ground Support & Legacy Avionics Maintenance
Ground-support equipment and maintained legacy avionics line-replaceable units frequently specify 5 V CMOS SRAM such as the K6X1008C2D-TF55 for non-flight-critical storage. Maintenance depots value the part's simple asynchronous interface, which allows verification with basic memory-test fixtures - write/read full patterns at 55 ns timing with no configuration step. The wide 4.5 V to 5.5 V input band tolerates generator-driven supply variation common in hangar power. Because this market cannot redesign certified hardware, EOL-management services and broker stock (e.g., the 3,855 units listed by excess channels) are the practical supply path, and documentation of date codes and lot traceability is expected. Cross-brand equivalents require formal change approval before use.
推荐
推荐产品汇总
工程参考数据： K6X1008C2D-TF55 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | K6X1008C2D-GF55 | K6X1008C2D-TF70 | K6X1008C2D-TB55 | M5M51008DVP-55HI |
|---|---|---|---|---|---|
| Package | 32-TSOP REVERSE | 32-TSOP (same die) | 32-TSOP REVERSE | 32-TSOP | 32-TSOP (verify pinout) |
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics (BSI functional equiv. listed) | Renesas Electronics |
| Organization | 128K x 8 | 128K x 8 | 128K x 8 | 128K x 8 | 128K x 8 |
| Access Time (tAA) | 55 ns | 55 ns | 70 ns | 55 ns | 55 ns |
| Memory Size | 1 Mbit | 1 Mbit | 1 Mbit | 1 Mbit | 1 Mbit |
关键差异点
- Fastest 5 V grade in the K6X1008C2D family （对比 K6X1008C2D-TF70)
- Full 1 Mbit density in a 5 V asynchronous interface （对比 K6X0808C1D-BF55)
- Same-die pin-compatible variants for repair stock （对比 M5M51008DVP-55HI)
设计说明
The K6X1008C2D-TF55 uses a 32-TSOP REVERSE pinout, which is mirrored versus a standard TSOP-II 32 footprint. Samsung's datasheet revision history explicitly deleted the 32-TSOP1-0820R package entry, showing the family shipped with more than one pinout convention during its life. Before reflow, print the footprint from your specific datasheet revision and verify pin 1 (CE location) against the board silkscreen. Placing a standard-TSOP die on a REVERSE footprint shorts Vcc to ground and destroys both the SRAM and often the CPU bus.
Power the device from a regulated 5 V rail held within 4.5 V to 5.5 V; no pin is 3.3 V tolerant. Estimated power dissipation is modest: 5 V x 35 mA = 175 mW during active access, so no thermal copper is required. For battery-backed designs, budget for CMOS standby current from the datasheet DC table and gate CE high during power-down; an incomplete CE level during brownout can corrupt data. Add a 0.1 uF ceramic decoupling capacitor within 3 mm of the Vcc pin plus 4.7 uF bulk per bank.
Because the part is EOL, broker stock may mix speed grades and date codes. Sample-test incoming lots by writing and reading full checkerboard patterns at your system's worst-case timing, and confirm the 55 ns grade (not 70 ns) if your design has no wait states. If using the K6X0808C1D half-density variant to fill sockets, tie the unused highest address pin appropriately - a floating A16 on a reduced-density footprint can alias addresses. Document substitutions with both datasheets attached for change-control.
合规信息
Distributor listings (DigiKey Marketplace, radhardic.com) report RoHS status Yes for this MPN. Because the part is EOL, no current Samsung environmental declaration page is available; REACH/halogen/conflict-minerals status set to unknown rather than assumed.
