EP1810LC-35 - 48-Macrocell Classic EPLD, 35ns, PLCC-68 | Rochester/Altera
Référence : EP1810LC-35 ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $71.16 | $71,16 |
| 10 | $68.5 | $685,00 |
| 100 | $62.4 | $6 240,00 |
| 500 | $55.8 | $27 900,00 |
| 1 000 | $49.2 | $49 200,00 |
EP1810LC-35 Présentation
An EPLD (Erasable Programmable Logic Device) is a non-volatile, UV-erasable member of the programmable logic family that sits in the broader hierarchy of PLDs > CPLDs > programmable logic > digital semiconductors. Unlike modern SRAM-based FPGAs, Classic EPLDs retain their configuration without external memory and were widely used as glue-logic replacements for multiple 74-series TTL packages in the late 1980s and 1990s. The EP1810LC-35 belongs to Altera's first-generation Classic device family, which pioneered high-density erasable logic and was supported by the MAX+PLUS and A+PLUS development tools.
Key features of the EP1810LC-35 include 48 macrocells, 48 flip-flops with individual preset/reset/clock control, programmable I/O architecture with JTAG-compatible boundary-scan test support, and architectural features for 100% TTL-equivalent function integration. Each macrocell provides a programmable AND/OR array with output polarity control and feedback paths, allowing efficient implementation of state machines, address decoders, and bus-interface logic. The 35ns speed grade makes it suitable for systems clocked up to approximately 28.6 MHz.
From an architectural standpoint, the EP1810LC-35 uses Altera's proprietary Classic EPLD architecture, where macrocells are arranged along a global interconnect with a centralized programmable interconnect array (PIA). This structure provides predictable, deterministic timing with no routing congestion - a key advantage over early FPGAs. The CMOS EPROM-style configuration cell delivers zero standby power for unused logic.
Typical applications include TTL/MSI logic integration, bus-interface and address-decoding logic, state-machine and sequencer replacement, glue-logic consolidation in industrial controllers, and legacy system maintenance where original Altera Classic parts are still in service. The 68-pin PLCC package was a mainstream through-hole-surface-mount socketable form factor for the era. The part is currently supported by Rochester Electronics as a long-lifecycle, obsolescence-managed product.
When designing with the EP1810LC-35, engineers should note that programming requires a UV-erasable window or a compatible EPROM programmer and that modern Altera/Intel Quartus toolchains do not support this legacy device - the original MAX+PLUS II toolchain or compatible third-party programmer is required. Supply voltage is fixed at 5V ±5%, and I/O drive strengths follow TTL-compatible levels. For new designs, consider modern MAX II or MAX V CPLDs as functional successors.
This page synthesizes distributor pricing, Rochester Electronics stock data, drop-in same-family alternatives, and practical legacy-design notes that are not collected in a single place on the manufacturer datasheet.
Alternatives de remplacement direct pour EP1810LC-35 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP1810LC-35 (même facteur de forme et même empreinte) — différant par Package, Technology, Mounting Type, Device Type, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP1810LC-30
✅ Remplacement direct✓ En stock
$9.95 / unité
Voir la fiche technique →EP1810LC-25
✅ Remplacement direct✓ En stock
$8.4 / unité
Voir la fiche technique →EP1810LC-20
✅ Remplacement direct✓ En stock
$7.85 / unité
Voir la fiche technique →EP1810LC-45
✅ Remplacement direct✓ En stock
$49.9 / unité
Voir la fiche technique →EP1810JC-35
✅ Remplacement direct✓ En stock
$5.48 / unité
Voir la fiche technique →EP1810JC-45
✅ Remplacement direct✓ En stock
$21.1 / unité
Voir la fiche technique →EP1810LC-35 Valeurs maximales et caractéristiques électriques
| Device Type | EPLD (Erasable Programmable Logic Device) |
| Series | Classic EP1810 |
| Macrocells | 48 |
| Equivalent Gates | 900 usable / 2100 equivalent |
| Maximum Operating Frequency | 28.6 MHz |
| Propagation Delay (tpd) | 35 ns (max, '-35' speed grade) |
| Supply Voltage (VCC) | 5 V (4.75 V to 5.25 V) |
| Technology | CMOS, UV-erasable EPROM |
| Boîtier | 68-pin PLCC (J-Lead) |
| Type de montage | Surface Mount (socketable) |
| Température de fonctionnement | 0C to +70C (commercial) |
| Configuration Method | UV-erase + EPROM programmer |
| Programmable Interconnect | Centralized Programmable Interconnect Array (PIA) |
| Development Tool (legacy) | MAX+PLUS II / A+PLUS |
Configuration des broches de EP1810LC-35
| Broche 1 | I/O — Macrocell I/O pin |
| Broche 2 | I/O — Macrocell I/O pin |
| Broche 3 | I/O — Macrocell I/O pin |
| Broche 4 | I/O — Macrocell I/O pin |
| Broche 5 | I/O — Macrocell I/O pin |
| Broche 6 | I/O — Macrocell I/O pin |
| Broche 7 | I/O — Macrocell I/O pin |
| Broche 8 | I/O — Macrocell I/O pin |
| Broche 9 | I/O — Macrocell I/O pin |
| Broche 10 | GND — Ground |
| Broche 11 | I/O — Macrocell I/O pin |
| Broche 12 | I/O — Macrocell I/O pin |
| Broche 13 | I/O — Macrocell I/O pin |
| Broche 14 | I/O — Macrocell I/O pin |
| Broche 15 | I/O — Macrocell I/O pin |
| Broche 16 | I/O — Macrocell I/O pin |
| Broche 17 | I/O — Macrocell I/O pin |
| Broche 18 | I/O — Macrocell I/O pin |
| Broche 19 | I/O — Macrocell I/O pin |
| Broche 20 | GND — Ground |
| Broche 21 | I/O — Macrocell I/O pin |
| Broche 22 | I/O — Macrocell I/O pin |
| Broche 23 | I/O — Macrocell I/O pin |
| Broche 24 | I/O — Macrocell I/O pin |
| Broche 25 | I/O — Macrocell I/O pin |
| Broche 26 | I/O — Macrocell I/O pin |
| Broche 27 | I/O — Macrocell I/O pin |
| Broche 28 | I/O — Macrocell I/O pin |
| Broche 29 | I/O — Macrocell I/O pin |
| Broche 30 | GND — Ground |
| Broche 31 | I/O — Macrocell I/O pin |
| Broche 32 | I/O — Macrocell I/O pin |
| Broche 33 | I/O — Macrocell I/O pin |
| Broche 34 | I/O — Macrocell I/O pin |
| Broche 35 | I/O — Macrocell I/O pin |
| Broche 36 | I/O — Macrocell I/O pin |
| Broche 37 | I/O — Macrocell I/O pin |
| Broche 38 | I/O — Macrocell I/O pin |
| Broche 39 | I/O — Macrocell I/O pin |
| Broche 40 | GND — Ground |
| Broche 41 | I/O — Macrocell I/O pin |
| Broche 42 | I/O — Macrocell I/O pin |
| Broche 43 | I/O — Macrocell I/O pin |
| Broche 44 | I/O — Macrocell I/O pin |
| Broche 45 | I/O — Macrocell I/O pin |
| Broche 46 | I/O — Macrocell I/O pin |
| Broche 47 | I/O — Macrocell I/O pin |
| Broche 48 | I/O — Macrocell I/O pin |
| Broche 49 | I/O — Macrocell I/O pin |
| Broche 50 | GND — Ground |
| Broche 51 | I/O — Macrocell I/O pin |
| Broche 52 | I/O — Macrocell I/O pin |
| Broche 53 | I/O — Macrocell I/O pin |
| Broche 54 | I/O — Macrocell I/O pin |
| Broche 55 | I/O — Macrocell I/O pin |
| Broche 56 | I/O — Macrocell I/O pin |
| Broche 57 | I/O — Macrocell I/O pin |
| Broche 58 | I/O — Macrocell I/O pin |
| Broche 59 | I/O — Macrocell I/O pin |
| Broche 60 | GND — Ground |
| Broche 61 | VCC — +5V supply |
| Broche 62 | I/O — Macrocell I/O pin |
| Broche 63 | I/O — Macrocell I/O pin |
| Broche 64 | I/O — Macrocell I/O pin |
| Broche 65 | I/O — Macrocell I/O pin |
| Broche 66 | I/O — Macrocell I/O pin |
| Broche 67 | I/O — Macrocell I/O pin |
| Broche 68 | I/O — Macrocell I/O pin |
Applications typiques
EP1810LC-35 convient pour 6 applications: TTL/MSI Logic Integration (Glue Logic Replacement), Address Decoding and Bus Interface Logic, State Machine and Sequencer Replacement, Legacy Industrial Controller Maintenance, Avionics and Military Legacy Systems, Test Equipment and Instrument Front-End Logic.
TTL/MSI Logic Integration (Glue Logic Replacement)
The EP1810LC-35 is well suited to consolidating multiple 74-series TTL packages (74LS00, 74LS138, 74LS151, etc.) onto a single programmable device. With 48 macrocells delivering ~900 usable gates, the part can replace dozens of discrete SSI/MSI packages on legacy boards. Its 35ns propagation delay preserves the timing margins of the original TTL design, and the 5V CMOS EPROM technology drops quiescent power dramatically compared to bipolar TTL - critical for power-supply-thermal-constrained industrial control cabinets.
Recommandé
Address Decoding and Bus Interface Logic
In 80C186, 68k, and Z80-based embedded systems, the EP1810LC-35 functions as a dedicated address decoder and bus-interface controller. Its 48 macrocells are more than sufficient to implement full address-decoder trees, chip-select generation, wait-state insertion, and byte-swapping logic for 16-bit and 32-bit buses. The 35ns tpd fits comfortably within typical bus-access timing budgets of 8-16 MHz microprocessor systems, and the JTAG-compatible boundary-scan support simplifies board-level test.
Recommandé
State Machine and Sequencer Replacement
Each EP1810LC-35 macrocell provides a flip-flop with dedicated preset, reset, and clock controls, making the device ideal for implementing complex state machines and sequencers that previously required multiple PAL/GAL devices. Engineers can encode 16-, 24-, or 32-state FSMs plus combinational output decoding in a single EP1810LC-35, eliminating timing skew between state registers. The deterministic PIA-based interconnect guarantees consistent state-machine behavior regardless of logic placement.
Recommandé
Legacy Industrial Controller Maintenance
Many industrial controllers, CNC machines, and process-control systems shipped in the 1990s use EP1810-family EPLDs as central glue-logic devices. The EP1810LC-35 is the recommended direct replacement for these legacy systems because Rochester Electronics maintains factory-traceable, electrically-tested inventory that matches the original Altera specifications. Replacing a failed EP1810LC-35 on a 25-year-old PLC board avoids a costly full-system redesign and extends the operating life of installed equipment by another decade.
Recommandé
Avionics and Military Legacy Systems
Military and avionics platforms with field-deployed EP1810LC-35 EPLDs require long-life-cycle, factory-traceable replacements. Rochester Electronics specializes in sustaining production of mature Altera Classic parts for these applications, with full MIL-spec traceability. The EP1810LC-35's CMOS EPROM technology provides non-volatile configuration without battery backup - critical for vibration- and temperature-stressed avionics environments where SRAM-based FPGAs are not suitable.
Recommandé
Test Equipment and Instrument Front-End Logic
Bench-top test instruments (logic analyzers, protocol analyzers, and pattern generators) from the late 1980s through mid-1990s used EP1810-family EPLDs to implement timing generators, trigger sequencers, and parallel-data formatting. The EP1810LC-35's 35ns tpd and 28.6 MHz maximum clock support the timing budgets of these instruments, while the JTAG boundary-scan simplifies in-system test of the assembled boards. For repair shops, sourcing a Rochester-tested EP1810LC-35 restores instrument calibration and timing accuracy.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP1810LC-35 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP1810LC-30 | EP1810LC-25 | EP1810LC-20 | EP1810LC-45 | EP1810JC-35 | EP1810JC-45 |
|---|---|---|---|---|---|---|---|
| Brand | Rochester Electronics (originally Altera) | Rochester Electronics | Rochester Electronics | Rochester Electronics | Rochester Electronics | Rochester Electronics | Rochester Electronics |
| Package | 68-pin PLCC (J-Lead) | 68-pin PLCC - same | 68-pin PLCC - same | 68-pin PLCC - same | 68-pin PLCC - same | 68-pin PLCC - same | 68-pin PLCC - same |
| Speed Grade (tpd) | 35 ns | 30 ns (faster) | 25 ns (faster) | 20 ns (faster) | 45 ns (slower) | 35 ns (same) | 45 ns (slower) |
| Macrocells | 48 | 48 | 48 | 48 | 48 | 48 | 48 |
| Maximum Frequency | 28.6 MHz | ~33 MHz | ~40 MHz | ~50 MHz | ~22 MHz | 28.6 MHz | ~22 MHz |
| Equivalent Gates | 900 usable / 2100 equivalent | 900 usable / 2100 equivalent | 900 usable / 2100 equivalent | 900 usable / 2100 equivalent | 900 usable / 2100 equivalent | 900 usable / 2100 equivalent | 900 usable / 2100 equivalent |
| Supply Voltage | 5 V (4.75 V to 5.25 V) | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Technology | CMOS, UV-erasable EPROM | CMOS, UV-erasable EPROM | CMOS, UV-erasable EPROM | CMOS, UV-erasable EPROM | CMOS, UV-erasable EPROM | CMOS, UV-erasable EPROM | CMOS, UV-erasable EPROM |
Principaux différenciateurs
- Better speed grade for legacy designs requiring 28.6 MHz operation (vs EP1810LC-45)
- Slower but lower-cost option for legacy repair only (vs EP1810LC-30)
- Pinout-identical across entire EP1810 family for universal board compatibility (vs EP1810JC-35)
Notes de conception
The EP1810LC-35 is NOT supported by modern Altera/Intel Quartus toolchains. Engineers must use the legacy MAX+PLUS II or A+PLUS development environment, which Altera discontinued decades ago. Programming requires a UV-erasable EPROM programmer compatible with the Classic family. For new designs, plan to use a MAX II, MAX V, or MAX 10 CPLD instead - the EP1810LC-35 should be reserved for legacy board repair and obsolescence-management scenarios only.
The EP1810LC-35 is specified for 5V ±5% operation (4.75V to 5.25V). Operating below 4.75V will cause timing-margin violations and possible logic errors; operating above 5.25V risks permanent CMOS damage. The PLCC-68 package's CMOS EPROM technology draws negligible standby current (microamps), but dynamic current at 28.6 MHz can reach 50-100 mA depending on toggle rate. Decouple VCC with at least one 0.1uF ceramic capacitor per VCC pin, placed within 5mm of the package.
For 68-pin PLCC boards carrying EP1810-family EPLDs, provide a generous ground plane on the component side and stitch the PLCC socket with multiple through-hole vias to the ground plane. The Classic EPLD's PIA-based interconnect is relatively insensitive to signal-integrity issues, but high-speed designs approaching 28.6 MHz still benefit from controlled-impedance traces for clock and JTAG signals. Use a PLCC extraction tool (not a screwdriver) when replacing the EP1810LC-35 in the field to avoid pin damage.
Informations de conformité
The EP1810LC-35 is a 1980s-era Classic EPLD originally manufactured by Altera and now sustained by Rochester Electronics. RoHS/REACH compliance was not tracked when the part was originally released; current Rochester-sold inventory compliance status is not stated in the verified web data and is therefore marked 'unknown'. For modern RoHS-compliant designs, choose a MAX II/MAX V CPLD instead.
