Altera

EP1K30TC144-1N - 30K Gate ACEX-1K FPGA, 102 I/O, 144-LQFP | Altera

Référence : EP1K30TC144-1N ✗ Fin de vie

En stock Expédié sous 1 à 3 jours ouvrés

2.5 V Vdss 144-LQFP (TQFP) Package 24,576 bits (6 EABs) Memory

À partir de $11.5 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-06

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$28.5	$28,50
10	$24.2	$242,00
100	$18.75	$1 875,00
500	$14.9	$7 450,00
1 000	$11.5	$11 500,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

EP1K30TC144-1N Présentation

The Altera (now Intel) EP1K30TC144-1N is a member of the ACEX-1K family of SRAM-based, low-cost Field-Programmable Gate Arrays (FPGAs) offering 30,000 typical gates and 1,728 Logic Elements (LEs) in a 144-pin LQFP (TQFP) surface-mount package with 102 user I/O pins. The device is built on a 0.18 µm SRAM process and operates from a 2.5 V core supply with 3.3 V or mixed-voltage I/O, supporting industrial temperature ranges and reconfigurable in-system via the IEEE 1149.1 JTAG interface.

An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit that can be configured by the customer or designer after manufacturing to implement arbitrary digital logic. Within the broader taxonomy, FPGAs belong to the programmable logic family, sitting alongside CPLDs and PALs. ACEX-1K is positioned by Altera as a low-cost, low-power programmable logic device family targeting glue logic, bus bridging, and moderate-density state-machine applications where a full Cyclone or Stratix device would be over-spec.

Key features include 24,576 bits of embedded RAM organized in EAB (Embedded Array Block) memory, 6 EABs, dual-port RAM support, 6 phase-locked loops (PLUs) for clock management, and built-in support for LVCMOS, LVTTL, SSTL-2, and SSTL-3 I/O standards. The device is rated for -40 °C to +85 °C (commercial/industrial) operating junction temperature and offers 100 MHz+ internal performance for typical designs.

The EP1K30TC144-1N uses a continuous, segmented routing architecture with 4-input look-up table (LUT) logic elements that include dedicated carry chains for fast arithmetic. This LUT-based fabric gives designers flexibility to implement any logic function while the embedded array blocks provide efficient on-chip memory for FIFOs, ROM, and dual-port RAM structures.

Typical applications include telecommunications interface cards, industrial control boards, low-cost prototyping platforms, PCI bridge logic, legacy system upgrades, educational digital logic labs, and consumer-electronics glue logic. The 102 available I/O pins and 1,728 LEs make it suitable for designs needing moderate logic density with low power and cost.

When designing with the EP1K30TC144-1N, ensure the Quartus II (or legacy MAX+PLUS II) design toolchain supports this mature part. JTAG programming is recommended for production; the configuration bitstream is volatile and must be loaded at every power-up from a configuration memory or a host processor.

This page synthesizes distributor pricing, drop-in alternatives from the Altera/Intel ACEX-1K family and cross-brand equivalents, JTAG configuration guidance, and practical design notes not found in a single manufacturer datasheet — useful for engineers maintaining legacy ACEX-1K designs or planning obsolescence migrations.

Alternatives de remplacement direct pour EP1K30TC144-1N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EP1K30TC144-1N (même facteur de forme et même empreinte) — différant par Process Technology, Package, Speed Grade, Configuration Method, Logic Elements / Cells.

EP1K10TC100-1N

Intel

Process Technology: 0.22 µm CMOS SRAM

Package: 100-pin TQFP (14 mm x 14 mm, 1 mm height)

Speed Grade: -1N (commercial, slower tier)