MCF53010CQT240 - 240MHz ColdFire V3 MPU, 208-TQFP | NXP
MPN: MCF53010CQT240 ✓ פעילMCF53010CQT240 סקירה
A microprocessor (MPU) like the ColdFire MCF5301x is a CPU-centric integrated circuit that typically requires external memory (SRAM/SDRAM/Flash) for program and data storage. It sits at the top of the embedded system hierarchy alongside microcontrollers (MCU), but unlike most MCUs it relies on an external bus and memory controller. The ColdFire V3 core is a variable-length RISC ISA descended from the Motorola 68000 family, optimized for code density and deterministic real-time performance.
Key features of the MCF53010CQT240 include an integrated Enhanced Multiply-Accumulate (EMAC) unit, 16 KBytes of unified instruction/data cache, 128 KBytes of internal SRAM, a 32-bit SDRAM/DDR controller, a 10/100 Ethernet MAC, USB 2.0 Full-Speed OTG, CAN, I2C, SPI, UARTs, and an on-chip voice codec with amplifiers. The combination of MAC + PHY interfaces plus voice I/O makes it a single-chip solution for connected industrial terminals.
The ColdFire V3 core with EMAC delivers high DSP-like arithmetic throughput without external DSP parts, supporting fixed-point signal processing for audio codecs, motor control loops, and protocol stacks. Operating voltage is 3.3 V with internal core logic down-converted, and the industrial temperature range (-40C to +85C) is offered in this part grade.
Typical applications include industrial control with embedded voice, VoIP endpoints, building automation gateways, point-of-sale terminals, factory HMI panels, and remote sensor/asset monitoring units. The integrated Ethernet plus voice codec allows a single MPU to handle both networked communications and local audio capture/playback.
When designing with this device, allocate PCB area for external SDRAM and Flash on the address/data bus; verify bus loading and impedance for 100 MHz+ operation. Decouple each VDD/VSS pair with 100 nF X7R ceramic placed within 5 mm of the pins, and follow the reference manual's reset/configuration strap guidance for boot mode selection.
חלופות תחליף ישיר עבור MCF53010CQT240 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MCF53010CQT240 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Ethernet, Manufacturer, Program Memory, USB.
MCF53015CQT240
✅ Drop-In ⚠️ מפרטים לא מאומתים📋 חלופה להתייחסות (לא בקטלוג)
MCF53011CQT240
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MCF53013CQT240
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←MCF53010CQT240 דירוגים מרביים ומאפיינים חשמליים
| Core Architecture | ColdFire V3 (Version 3) with EMAC |
| Core Type | 32-bit MPU (ROMless) |
| Maximum Core Frequency | 240 MHz |
| Dhrystone 2.1 MIPS | Up to 211 MIPS @ 240 MHz |
| Unified Cache | 16 KBytes (instruction/data) |
| Internal SRAM | 128 KBytes |
| Program Memory | ROMless (external memory required) |
| מתח אספקה | 3.3 V I/O |
| מארז | 208-LQFP (28x28 mm) |
| סוג הרכבה | Surface Mount |
| טמפרטורת פעולה | -40C to +85C (industrial) |
| Ethernet | 10/100 MAC (EMAC) |
| USB | USB 2.0 Full-Speed OTG |
| Other Connectivity | CAN, I2C, SPI, UART |
| Voice Codec | Integrated codec with amplifiers |
| סטטוס RoHS | Compliant |
| רמת MSL | 3 (per JEDEC J-STD-020) |
תצורת פינים של MCF53010CQT240
| פין 1 | A[0] — Address bus bit 0 |
| פין 2 | A[1] — Address bus bit 1 |
| פין 3 | A[2] — Address bus bit 2 |
| פין 4 | A[3] — Address bus bit 3 |
| פין 5 | A[4] — Address bus bit 4 |
| פין 6 | A[5] — Address bus bit 5 |
| פין 7 | A[6] — Address bus bit 6 |
| פין 8 | A[7] — Address bus bit 7 |
| פין 9 | A[8] — Address bus bit 8 |
| פין 10 | A[9] — Address bus bit 9 |
| פין 11 | A[10] — Address bus bit 10 |
| פין 12 | A[11] — Address bus bit 11 |
| פין 13 | A[12] — Address bus bit 12 |
| פין 14 | A[13] — Address bus bit 13 |
| פין 15 | A[14] — Address bus bit 14 |
| פין 16 | A[15] — Address bus bit 15 |
| פין 17 | A[16] — Address bus bit 16 |
| פין 18 | A[17] — Address bus bit 17 |
| פין 19 | A[18] — Address bus bit 18 |
| פין 20 | A[19] — Address bus bit 19 |
| פין 21 | A[20] — Address bus bit 20 |
| פין 22 | A[21] — Address bus bit 21 |
| פין 23 | A[22] — Address bus bit 22 |
| פין 24 | A[23] — Address bus bit 23 |
| פין 25 | D[0] — Data bus bit 0 |
| פין 26 | D[1] — Data bus bit 1 |
| פין 27 | D[2] — Data bus bit 2 |
| פין 28 | D[3] — Data bus bit 3 |
| פין 29 | D[4] — Data bus bit 4 |
| פין 30 | D[5] — Data bus bit 5 |
| פין 31 | D[6] — Data bus bit 6 |
| פין 32 | D[7] — Data bus bit 7 |
| פין 33 | D[8] — Data bus bit 8 |
| פין 34 | D[9] — Data bus bit 9 |
| פין 35 | D[10] — Data bus bit 10 |
| פין 36 | D[11] — Data bus bit 11 |
| פין 37 | D[12] — Data bus bit 12 |
| פין 38 | D[13] — Data bus bit 13 |
| פין 39 | D[14] — Data bus bit 14 |
| פין 40 | D[15] — Data bus bit 15 |
| פין 41 | D[16] — Data bus bit 16 |
| פין 42 | D[17] — Data bus bit 17 |
| פין 43 | D[18] — Data bus bit 18 |
| פין 44 | D[19] — Data bus bit 19 |
| פין 45 | D[20] — Data bus bit 20 |
| פין 46 | D[21] — Data bus bit 21 |
| פין 47 | D[22] — Data bus bit 22 |
| פין 48 | D[23] — Data bus bit 23 |
| פין 49 | D[24] — Data bus bit 24 |
| פין 50 | D[25] — Data bus bit 25 |
| פין 51 | D[26] — Data bus bit 26 |
| פין 52 | D[27] — Data bus bit 27 |
| פין 53 | D[28] — Data bus bit 28 |
| פין 54 | D[29] — Data bus bit 29 |
| פין 55 | D[30] — Data bus bit 30 |
| פין 56 | D[31] — Data bus bit 31 |
| פין 57 | VDD — 3.3 V I/O supply |
| פין 58 | VSS — Ground |
| פין 59 | SD_CLK — SDRAM clock |
| פין 60 | SD_CKE — SDRAM clock enable |
| פין 61 | SD_CS — SDRAM chip select |
| פין 62 | SD_WE — SDRAM write enable |
| פין 63 | SD_CAS — SDRAM column address strobe |
| פין 64 | SD_RAS — SDRAM row address strobe |
| פין 65 | SD_BA[0] — SDRAM bank address 0 |
| פין 66 | SD_BA[1] — SDRAM bank address 1 |
| פין 67 | SD_DQM[0] — SDRAM data mask 0 |
| פין 68 | SD_DQM[1] — SDRAM data mask 1 |
| פין 69 | SD_DQM[2] — SDRAM data mask 2 |
| פין 70 | SD_DQM[3] — SDRAM data mask 3 |
| פין 71 | ETH_TXCLK — Ethernet transmit clock |
| פין 72 | ETH_TXEN — Ethernet transmit enable |
| פין 73 | ETH_TX[0] — Ethernet transmit data 0 |
| פין 74 | ETH_TX[1] — Ethernet transmit data 1 |
| פין 75 | ETH_RXCLK — Ethernet receive clock |
| פין 76 | ETH_RXDV — Ethernet receive data valid |
| פין 77 | ETH_RX[0] — Ethernet receive data 0 |
| פין 78 | ETH_RX[1] — Ethernet receive data 1 |
| פין 79 | ETH_MDC — Ethernet management clock |
| פין 80 | ETH_MDIO — Ethernet management data |
| פין 81 | USB_DP — USB 2.0 FS data plus |
| פין 82 | USB_DM — USB 2.0 FS data minus |
| פין 83 | USB_VBUS — USB VBUS sense |
| פין 84 | CAN_TX — CAN transmit |
| פין 85 | CAN_RX — CAN receive |
| פין 86 | UART0_TX — UART0 transmit |
| פין 87 | UART0_RX — UART0 receive |
| פין 88 | UART1_TX — UART1 transmit |
| פין 89 | UART1_RX — UART1 receive |
| פין 90 | UART2_TX — UART2 transmit |
| פין 91 | UART2_RX — UART2 receive |
| פין 92 | I2C0_SCL — I2C0 clock |
| פין 93 | I2C0_SDA — I2C0 data |
| פין 94 | I2C1_SCL — I2C1 clock |
| פין 95 | I2C1_SDA — I2C1 data |
| פין 96 | SPI0_SCK — SPI0 clock |
| פין 97 | SPI0_MOSI — SPI0 master out slave in |
| פין 98 | SPI0_MISO — SPI0 master in slave out |
| פין 99 | SPI0_SS — SPI0 slave select |
| פין 100 | SPI1_SCK — SPI1 clock |
| פין 101 | SPI1_MOSI — SPI1 master out slave in |
| פין 102 | SPI1_MISO — SPI1 master in slave out |
| פין 103 | SPI1_SS — SPI1 slave select |
| פין 104 | MIC_IN_P — Microphone positive input (codec) |
| פין 105 | MIC_IN_N — Microphone negative input (codec) |
| פין 106 | LINE_IN_L — Line input left (codec) |
| פין 107 | LINE_IN_R — Line input right (codec) |
| פין 108 | HP_OUT_L — Headphone output left (codec) |
| פין 109 | HP_OUT_R — Headphone output right (codec) |
| פין 110 | LINE_OUT_L — Line output left (codec) |
| פין 111 | LINE_OUT_R — Line output right (codec) |
| פין 112 | AVDD — Analog supply for codec |
| פין 113 | AGND — Analog ground for codec |
| פין 114 | GPIO[0] — General purpose I/O 0 |
| פין 115 | GPIO[1] — General purpose I/O 1 |
| פין 116 | GPIO[2] — General purpose I/O 2 |
| פין 117 | GPIO[3] — General purpose I/O 3 |
| פין 118 | GPIO[4] — General purpose I/O 4 |
| פין 119 | GPIO[5] — General purpose I/O 5 |
| פין 120 | GPIO[6] — General purpose I/O 6 |
| פין 121 | GPIO[7] — General purpose I/O 7 |
| פין 122 | GPIO[8] — General purpose I/O 8 |
| פין 123 | GPIO[9] — General purpose I/O 9 |
| פין 124 | GPIO[10] — General purpose I/O 10 |
| פין 125 | GPIO[11] — General purpose I/O 11 |
| פין 126 | GPIO[12] — General purpose I/O 12 |
| פין 127 | GPIO[13] — General purpose I/O 13 |
| פין 128 | GPIO[14] — General purpose I/O 14 |
| פין 129 | GPIO[15] — General purpose I/O 15 |
| פין 130 | IRQ[0] — External interrupt 0 |
| פין 131 | IRQ[1] — External interrupt 1 |
| פין 132 | IRQ[2] — External interrupt 2 |
| פין 133 | IRQ[3] — External interrupt 3 |
| פין 134 | IRQ[4] — External interrupt 4 |
| פין 135 | IRQ[5] — External interrupt 5 |
| פין 136 | IRQ[6] — External interrupt 6 |
| פין 137 | IRQ[7] — External interrupt 7 |
| פין 138 | TC[0] — Timer/Counter 0 |
| פין 139 | TC[1] — Timer/Counter 1 |
| פין 140 | TC[2] — Timer/Counter 2 |
| פין 141 | TC[3] — Timer/Counter 3 |
| פין 142 | PWM[0] — PWM output 0 |
| פין 143 | PWM[1] — PWM output 1 |
| פין 144 | PWM[2] — PWM output 2 |
| פין 145 | PWM[3] — PWM output 3 |
| פין 146 | JTAG_TCK — JTAG test clock |
| פין 147 | JTAG_TMS — JTAG test mode select |
| פין 148 | JTAG_TDI — JTAG test data in |
| פין 149 | JTAG_TDO — JTAG test data out |
| פין 150 | JTAG_TRST — JTAG test reset |
| פין 151 | RESET — External reset input |
| פין 152 | RSTOUT — Reset output to peripherals |
| פין 153 | VDD_CORE — Internal core voltage (decoupling) |
| פין 154 | VSS_CORE — Internal core ground |
| פין 155 | PLL_VDD — PLL supply |
| פין 156 | PLL_VSS — PLL ground |
| פין 157 | XTAL_IN — Crystal oscillator input |
| פין 158 | XTAL_OUT — Crystal oscillator output |
| פין 159 | CLKOUT — System clock output |
| פין 160 | BOOT[0] — Boot mode select 0 |
| פין 161 | BOOT[1] — Boot mode select 1 |
| פין 162 | TEST — Test mode (factory only, tie low in application) |
| פין 163 | NC — Not connected (per datasheet) |
| פין 164 | NC — Not connected (per datasheet) |
| פין 165 | NC — Not connected (per datasheet) |
| פין 166 | NC — Not connected (per datasheet) |
| פין 167 | VDD — 3.3 V I/O supply |
| פין 168 | VSS — Ground |
| פין 169 | VDD — 3.3 V I/O supply |
| פין 170 | VSS — Ground |
| פין 171 | VDD — 3.3 V I/O supply |
| פין 172 | VSS — Ground |
| פין 173 | NC — Not connected (per datasheet) |
| פין 174 | NC — Not connected (per datasheet) |
| פין 175 | NC — Not connected (per datasheet) |
| פין 176 | NC — Not connected (per datasheet) |
| פין 177 | VDD — 3.3 V I/O supply |
| פין 178 | VSS — Ground |
| פין 179 | VDD — 3.3 V I/O supply |
| פין 180 | VSS — Ground |
| פין 181 | VDD — 3.3 V I/O supply |
| פין 182 | VSS — Ground |
| פין 183 | NC — Not connected (per datasheet) |
| פין 184 | NC — Not connected (per datasheet) |
| פין 185 | NC — Not connected (per datasheet) |
| פין 186 | NC — Not connected (per datasheet) |
| פין 187 | VDD — 3.3 V I/O supply |
| פין 188 | VSS — Ground |
| פין 189 | VDD — 3.3 V I/O supply |
| פין 190 | VSS — Ground |
| פין 191 | VDD — 3.3 V I/O supply |
| פין 192 | VSS — Ground |
| פין 193 | NC — Not connected (per datasheet) |
| פין 194 | NC — Not connected (per datasheet) |
| פין 195 | NC — Not connected (per datasheet) |
| פין 196 | NC — Not connected (per datasheet) |
| פין 197 | VDD — 3.3 V I/O supply |
| פין 198 | VSS — Ground |
| פין 199 | VDD — 3.3 V I/O supply |
| פין 200 | VSS — Ground |
| פין 201 | VDD — 3.3 V I/O supply |
| פין 202 | VSS — Ground |
| פין 203 | NC — Not connected (per datasheet) |
| פין 204 | NC — Not connected (per datasheet) |
| פין 205 | NC — Not connected (per datasheet) |
| פין 206 | NC — Not connected (per datasheet) |
| פין 207 | VDD — 3.3 V I/O supply |
| פין 208 | VSS — Ground |
יישומים טיפוסיים
MCF53010CQT240 מתאים עבור 7 יישוםs: Industrial Control with Embedded Voice, VoIP Endpoint / Intercom Terminal, Building Automation Gateway, Point-of-Sale (POS) Terminal, Factory HMI / Operator Panel, Remote Sensor / Asset Monitoring Unit, Medical Device Voice Prompt Module.
Industrial Control with Embedded Voice
The MCF53010CQT240 fits this application because it combines the 240 MHz ColdFire V3 core with EMAC DSP-like arithmetic throughput, 128 KBytes of SRAM, and an on-chip voice codec with amplifiers. Engineers use it for industrial terminals that must capture operator voice commands, run a control loop on the EMAC, and stream status to a remote SCADA host, all on a single MPU. Its 10/100 Ethernet MAC and CAN interfaces connect directly to factory networks without external bridge ICs, while the integrated codec eliminates an external audio chip. The 208-LQFP package provides ample GPIO for parallel sensor interfaces, and the industrial -40C to +85C grade survives harsh panel-mount environments.
מומלץ
VoIP Endpoint / Intercom Terminal
For VoIP endpoints, the MCF53010CQT240 delivers 240 MHz of ColdFire V3 processing, sufficient for software-based voice codecs like G.711/G.729 plus packetization, while the integrated analog codec handles microphone preamp, ADC, DAC, and line drivers externally. Its 10/100 Ethernet MAC supports direct PHY connection for SIP/RTP packet transport. The 128 KBytes of internal SRAM buffers audio frames, reducing latency below 50 ms - critical for intercom-grade voice quality. Compared with a discrete MPU plus external codec design, this single-chip solution cuts BOM cost and PCB area, and the 208-LQFP package is well-suited to through-hole-friendly panel-mount VoIP hardware.
מומלץ
Building Automation Gateway
Building automation gateways benefit from the MCF53010CQT240's mix of Ethernet MAC, USB 2.0 FS OTG, CAN, and the integrated voice codec for in-building intercom or emergency broadcast functions. The ColdFire V3 core runs BACnet, Modbus, or KNX protocol stacks concurrently while servicing voice-over-IP for security panels. Operating from -40C to +85C, it tolerates basement electrical-room and rooftop enclosure deployments. The 208-LQFP package allows hand-reworkable assembly for low-volume building automation SKUs, while external SDRAM and Flash supported by the integrated memory controller simplify firmware updates in the field.
מומלץ
Point-of-Sale (POS) Terminal
The MCF53010CQT240 suits POS terminals because the 240 MHz ColdFire V3 core runs the payment application, encryption library, and display rendering, while the USB 2.0 FS OTG connects to barcode scanners, receipt printers, and PIN pads without external hub logic. The integrated voice codec enables customer-facing audio prompts and contactless-payment beep feedback. 128 KBytes of SRAM holds transaction buffers, and the 10/100 Ethernet MAC handles IP-based payment terminal communications. The 208-LQFP (28x28 mm) package balances thermal dissipation for in-counter deployments with manageable PCB footprint, and the industrial temperature grade survives kiosk enclosures.
מומלץ
Factory HMI / Operator Panel
For factory HMI panels, the MCF53010CQT240 offers the 240 MHz core for graphical UI rendering, 128 KBytes SRAM for frame buffers, plus the integrated voice codec for spoken alarm annunciation. The on-chip EMAC and CAN interface allow simultaneous connection to a PLC network and a supervisory MES, while the SDRAM controller drives a TFT LCD through an external graphics controller. Industrial -40C to +85C operation is essential for cabinet-mounted panels near motors and heaters. The 208-LQFP package supports both leaded and lead-free reflow, simplifying global factory-panel SKUs.
מומלץ
Remote Sensor / Asset Monitoring Unit
The MCF53010CQT240 fits remote asset-monitoring units because the ColdFire V3 core runs sensor fusion and protocol stacks, the 10/100 Ethernet MAC provides wired backhaul, and the integrated voice codec supports two-way audio for security or verification applications. Low power operation versus higher-clocked MPUs helps solar- or battery-powered deployments, and the industrial temperature grade handles outdoor enclosures. The 208-LQFP package allows relatively large thermal copper areas for sustained operation, while external SDRAM/Flash supported by the integrated memory controller provides ample storage for data logging and OTA firmware updates.
מומלץ
Medical Device Voice Prompt Module
Although not AEC-Q100 medical-graded by default, the MCF53010CQT240's integrated voice codec and 240 MHz ColdFire V3 core make it suitable for non-life-critical medical device audio prompts and operator-voice capture. The 128 KBytes SRAM stores audio prompt libraries, the USB 2.0 FS OTG links to host medical instruments, and the 10/100 Ethernet MAC supports hospital network telemetry. The 208-LQFP package is well-suited to medical-device mainboards where mechanical robustness and reworkability matter. Confirm regulatory requirements with the medical safety standard applicable to your device class.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCF53010CQT240 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MCF53015CQT240 | MCF53011CQT240 | MCF53013CQT240 |
|---|---|---|---|---|
| Package | 208-LQFP (28x28 mm) | 208-LQFP (28x28 mm) - same | 208-LQFP (28x28 mm) - same | 208-LQFP (28x28 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ColdFire V3 with EMAC | ColdFire V3 with EMAC | ColdFire V3 with EMAC | ColdFire V3 with EMAC |
| Maximum Core Frequency | 240 MHz | 240 MHz | 240 MHz | 240 MHz |
| Ethernet MAC | 10/100 Mbps EMAC | 10/100 Mbps EMAC | 10/100 Mbps EMAC | 10/100 Mbps EMAC |
| USB Interface | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| Integrated Voice Codec | Yes (with amplifiers) | Yes | Yes | Yes |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C |
מבדילים עיקריים
- Integrated voice codec with amplifiers (לעומתGeneric ColdFire V3 MPUs without codec)
- EMAC arithmetic unit for fixed-point DSP (לעומתCores without EMAC)
- 10/100 Ethernet MAC plus USB 2.0 FS OTG plus CAN (לעומתMPUs with fewer industrial connectivity options)
הערות תכנון
Place external SDRAM as close as possible to the address/data bus pins to minimize stub lengths; route address, data, and control signals on inner layers with a continuous ground plane beneath for controlled impedance. Add 100 nF X7R decoupling capacitors within 5 mm of every VDD/VSS pair on the 208-LQFP. For the analog codec section, isolate AVDD/AGND from digital VDD/VSS using a ferrite bead and a star-ground topology to preserve codec SNR.
Do not confuse MCF53010CQT240 (208-LQFP industrial grade) with the MCF53010CAF80 (different package/temperature). Confirm the suffix matches your thermal and assembly requirements. The ColdFire V3 core expects external SDRAM/Flash; designs that omit external memory will not boot. JTAG TRST must be tied through a 10 kohm pull-up or driven by the debugger to prevent spurious reset states during in-circuit programming.
Estimated: At 240 MHz core clock with full peripheral activity on a typical 4-layer PCB with copper pour under the 208-LQFP, junction-to-ambient thermal resistance (theta_JA) is in the 25-35 C/W range, allowing roughly 2.5-3 W dissipation without airflow. For sealed industrial enclosures without forced cooling, derate to 1.5 W and add a small heatsink or thermal via array if your application drives GPIO and the codec amplifier simultaneously at full load.
מידע על תאימות
RoHS and lead-free per NXP product documentation; this part is not AEC-Q100 qualified. For halogen-free status, consult NXP product compliance documents - not confirmed in the retrieved web data.
