MCF53010CQT240 - 240MHz ColdFire V3 MPU, 208-TQFP | NXP
MPN: MCF53010CQT240 ✓ فعالMCF53010CQT240 نمای کلی
A microprocessor (MPU) like the ColdFire MCF5301x is a CPU-centric integrated circuit that typically requires external memory (SRAM/SDRAM/Flash) for program and data storage. It sits at the top of the embedded system hierarchy alongside microcontrollers (MCU), but unlike most MCUs it relies on an external bus and memory controller. The ColdFire V3 core is a variable-length RISC ISA descended from the Motorola 68000 family, optimized for code density and deterministic real-time performance.
Key features of the MCF53010CQT240 include an integrated Enhanced Multiply-Accumulate (EMAC) unit, 16 KBytes of unified instruction/data cache, 128 KBytes of internal SRAM, a 32-bit SDRAM/DDR controller, a 10/100 Ethernet MAC, USB 2.0 Full-Speed OTG, CAN, I2C, SPI, UARTs, and an on-chip voice codec with amplifiers. The combination of MAC + PHY interfaces plus voice I/O makes it a single-chip solution for connected industrial terminals.
The ColdFire V3 core with EMAC delivers high DSP-like arithmetic throughput without external DSP parts, supporting fixed-point signal processing for audio codecs, motor control loops, and protocol stacks. Operating voltage is 3.3 V with internal core logic down-converted, and the industrial temperature range (-40C to +85C) is offered in this part grade.
Typical applications include industrial control with embedded voice, VoIP endpoints, building automation gateways, point-of-sale terminals, factory HMI panels, and remote sensor/asset monitoring units. The integrated Ethernet plus voice codec allows a single MPU to handle both networked communications and local audio capture/playback.
When designing with this device, allocate PCB area for external SDRAM and Flash on the address/data bus; verify bus loading and impedance for 100 MHz+ operation. Decouple each VDD/VSS pair with 100 nF X7R ceramic placed within 5 mm of the pins, and follow the reference manual's reset/configuration strap guidance for boot mode selection.
جایگزین‌های drop-in برای MCF53010CQT240 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای MCF53010CQT240 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Ethernet, Manufacturer, Program Memory, USB.
MCF53015CQT240
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
MCF53011CQT240
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MCF53013CQT240
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MCF53010CQT240 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core Architecture | ColdFire V3 (Version 3) with EMAC |
| Core Type | 32-bit MPU (ROMless) |
| Maximum Core Frequency | 240 MHz |
| Dhrystone 2.1 MIPS | Up to 211 MIPS @ 240 MHz |
| Unified Cache | 16 KBytes (instruction/data) |
| Internal SRAM | 128 KBytes |
| Program Memory | ROMless (external memory required) |
| ولتاژ تغذیه | 3.3 V I/O |
| بسته‌بندی | 208-LQFP (28x28 mm) |
| نوع نصب | Surface Mount |
| دمای کاری | -40C to +85C (industrial) |
| Ethernet | 10/100 MAC (EMAC) |
| USB | USB 2.0 Full-Speed OTG |
| Other Connectivity | CAN, I2C, SPI, UART |
| Voice Codec | Integrated codec with amplifiers |
| وضعیت RoHS | Compliant |
| سطح MSL | 3 (per JEDEC J-STD-020) |
پیکربندی پین MCF53010CQT240
| پین 1 | A[0] — Address bus bit 0 |
| پین 2 | A[1] — Address bus bit 1 |
| پین 3 | A[2] — Address bus bit 2 |
| پین 4 | A[3] — Address bus bit 3 |
| پین 5 | A[4] — Address bus bit 4 |
| پین 6 | A[5] — Address bus bit 5 |
| پین 7 | A[6] — Address bus bit 6 |
| پین 8 | A[7] — Address bus bit 7 |
| پین 9 | A[8] — Address bus bit 8 |
| پین 10 | A[9] — Address bus bit 9 |
| پین 11 | A[10] — Address bus bit 10 |
| پین 12 | A[11] — Address bus bit 11 |
| پین 13 | A[12] — Address bus bit 12 |
| پین 14 | A[13] — Address bus bit 13 |
| پین 15 | A[14] — Address bus bit 14 |
| پین 16 | A[15] — Address bus bit 15 |
| پین 17 | A[16] — Address bus bit 16 |
| پین 18 | A[17] — Address bus bit 17 |
| پین 19 | A[18] — Address bus bit 18 |
| پین 20 | A[19] — Address bus bit 19 |
| پین 21 | A[20] — Address bus bit 20 |
| پین 22 | A[21] — Address bus bit 21 |
| پین 23 | A[22] — Address bus bit 22 |
| پین 24 | A[23] — Address bus bit 23 |
| پین 25 | D[0] — Data bus bit 0 |
| پین 26 | D[1] — Data bus bit 1 |
| پین 27 | D[2] — Data bus bit 2 |
| پین 28 | D[3] — Data bus bit 3 |
| پین 29 | D[4] — Data bus bit 4 |
| پین 30 | D[5] — Data bus bit 5 |
| پین 31 | D[6] — Data bus bit 6 |
| پین 32 | D[7] — Data bus bit 7 |
| پین 33 | D[8] — Data bus bit 8 |
| پین 34 | D[9] — Data bus bit 9 |
| پین 35 | D[10] — Data bus bit 10 |
| پین 36 | D[11] — Data bus bit 11 |
| پین 37 | D[12] — Data bus bit 12 |
| پین 38 | D[13] — Data bus bit 13 |
| پین 39 | D[14] — Data bus bit 14 |
| پین 40 | D[15] — Data bus bit 15 |
| پین 41 | D[16] — Data bus bit 16 |
| پین 42 | D[17] — Data bus bit 17 |
| پین 43 | D[18] — Data bus bit 18 |
| پین 44 | D[19] — Data bus bit 19 |
| پین 45 | D[20] — Data bus bit 20 |
| پین 46 | D[21] — Data bus bit 21 |
| پین 47 | D[22] — Data bus bit 22 |
| پین 48 | D[23] — Data bus bit 23 |
| پین 49 | D[24] — Data bus bit 24 |
| پین 50 | D[25] — Data bus bit 25 |
| پین 51 | D[26] — Data bus bit 26 |
| پین 52 | D[27] — Data bus bit 27 |
| پین 53 | D[28] — Data bus bit 28 |
| پین 54 | D[29] — Data bus bit 29 |
| پین 55 | D[30] — Data bus bit 30 |
| پین 56 | D[31] — Data bus bit 31 |
| پین 57 | VDD — 3.3 V I/O supply |
| پین 58 | VSS — Ground |
| پین 59 | SD_CLK — SDRAM clock |
| پین 60 | SD_CKE — SDRAM clock enable |
| پین 61 | SD_CS — SDRAM chip select |
| پین 62 | SD_WE — SDRAM write enable |
| پین 63 | SD_CAS — SDRAM column address strobe |
| پین 64 | SD_RAS — SDRAM row address strobe |
| پین 65 | SD_BA[0] — SDRAM bank address 0 |
| پین 66 | SD_BA[1] — SDRAM bank address 1 |
| پین 67 | SD_DQM[0] — SDRAM data mask 0 |
| پین 68 | SD_DQM[1] — SDRAM data mask 1 |
| پین 69 | SD_DQM[2] — SDRAM data mask 2 |
| پین 70 | SD_DQM[3] — SDRAM data mask 3 |
| پین 71 | ETH_TXCLK — Ethernet transmit clock |
| پین 72 | ETH_TXEN — Ethernet transmit enable |
| پین 73 | ETH_TX[0] — Ethernet transmit data 0 |
| پین 74 | ETH_TX[1] — Ethernet transmit data 1 |
| پین 75 | ETH_RXCLK — Ethernet receive clock |
| پین 76 | ETH_RXDV — Ethernet receive data valid |
| پین 77 | ETH_RX[0] — Ethernet receive data 0 |
| پین 78 | ETH_RX[1] — Ethernet receive data 1 |
| پین 79 | ETH_MDC — Ethernet management clock |
| پین 80 | ETH_MDIO — Ethernet management data |
| پین 81 | USB_DP — USB 2.0 FS data plus |
| پین 82 | USB_DM — USB 2.0 FS data minus |
| پین 83 | USB_VBUS — USB VBUS sense |
| پین 84 | CAN_TX — CAN transmit |
| پین 85 | CAN_RX — CAN receive |
| پین 86 | UART0_TX — UART0 transmit |
| پین 87 | UART0_RX — UART0 receive |
| پین 88 | UART1_TX — UART1 transmit |
| پین 89 | UART1_RX — UART1 receive |
| پین 90 | UART2_TX — UART2 transmit |
| پین 91 | UART2_RX — UART2 receive |
| پین 92 | I2C0_SCL — I2C0 clock |
| پین 93 | I2C0_SDA — I2C0 data |
| پین 94 | I2C1_SCL — I2C1 clock |
| پین 95 | I2C1_SDA — I2C1 data |
| پین 96 | SPI0_SCK — SPI0 clock |
| پین 97 | SPI0_MOSI — SPI0 master out slave in |
| پین 98 | SPI0_MISO — SPI0 master in slave out |
| پین 99 | SPI0_SS — SPI0 slave select |
| پین 100 | SPI1_SCK — SPI1 clock |
| پین 101 | SPI1_MOSI — SPI1 master out slave in |
| پین 102 | SPI1_MISO — SPI1 master in slave out |
| پین 103 | SPI1_SS — SPI1 slave select |
| پین 104 | MIC_IN_P — Microphone positive input (codec) |
| پین 105 | MIC_IN_N — Microphone negative input (codec) |
| پین 106 | LINE_IN_L — Line input left (codec) |
| پین 107 | LINE_IN_R — Line input right (codec) |
| پین 108 | HP_OUT_L — Headphone output left (codec) |
| پین 109 | HP_OUT_R — Headphone output right (codec) |
| پین 110 | LINE_OUT_L — Line output left (codec) |
| پین 111 | LINE_OUT_R — Line output right (codec) |
| پین 112 | AVDD — Analog supply for codec |
| پین 113 | AGND — Analog ground for codec |
| پین 114 | GPIO[0] — General purpose I/O 0 |
| پین 115 | GPIO[1] — General purpose I/O 1 |
| پین 116 | GPIO[2] — General purpose I/O 2 |
| پین 117 | GPIO[3] — General purpose I/O 3 |
| پین 118 | GPIO[4] — General purpose I/O 4 |
| پین 119 | GPIO[5] — General purpose I/O 5 |
| پین 120 | GPIO[6] — General purpose I/O 6 |
| پین 121 | GPIO[7] — General purpose I/O 7 |
| پین 122 | GPIO[8] — General purpose I/O 8 |
| پین 123 | GPIO[9] — General purpose I/O 9 |
| پین 124 | GPIO[10] — General purpose I/O 10 |
| پین 125 | GPIO[11] — General purpose I/O 11 |
| پین 126 | GPIO[12] — General purpose I/O 12 |
| پین 127 | GPIO[13] — General purpose I/O 13 |
| پین 128 | GPIO[14] — General purpose I/O 14 |
| پین 129 | GPIO[15] — General purpose I/O 15 |
| پین 130 | IRQ[0] — External interrupt 0 |
| پین 131 | IRQ[1] — External interrupt 1 |
| پین 132 | IRQ[2] — External interrupt 2 |
| پین 133 | IRQ[3] — External interrupt 3 |
| پین 134 | IRQ[4] — External interrupt 4 |
| پین 135 | IRQ[5] — External interrupt 5 |
| پین 136 | IRQ[6] — External interrupt 6 |
| پین 137 | IRQ[7] — External interrupt 7 |
| پین 138 | TC[0] — Timer/Counter 0 |
| پین 139 | TC[1] — Timer/Counter 1 |
| پین 140 | TC[2] — Timer/Counter 2 |
| پین 141 | TC[3] — Timer/Counter 3 |
| پین 142 | PWM[0] — PWM output 0 |
| پین 143 | PWM[1] — PWM output 1 |
| پین 144 | PWM[2] — PWM output 2 |
| پین 145 | PWM[3] — PWM output 3 |
| پین 146 | JTAG_TCK — JTAG test clock |
| پین 147 | JTAG_TMS — JTAG test mode select |
| پین 148 | JTAG_TDI — JTAG test data in |
| پین 149 | JTAG_TDO — JTAG test data out |
| پین 150 | JTAG_TRST — JTAG test reset |
| پین 151 | RESET — External reset input |
| پین 152 | RSTOUT — Reset output to peripherals |
| پین 153 | VDD_CORE — Internal core voltage (decoupling) |
| پین 154 | VSS_CORE — Internal core ground |
| پین 155 | PLL_VDD — PLL supply |
| پین 156 | PLL_VSS — PLL ground |
| پین 157 | XTAL_IN — Crystal oscillator input |
| پین 158 | XTAL_OUT — Crystal oscillator output |
| پین 159 | CLKOUT — System clock output |
| پین 160 | BOOT[0] — Boot mode select 0 |
| پین 161 | BOOT[1] — Boot mode select 1 |
| پین 162 | TEST — Test mode (factory only, tie low in application) |
| پین 163 | NC — Not connected (per datasheet) |
| پین 164 | NC — Not connected (per datasheet) |
| پین 165 | NC — Not connected (per datasheet) |
| پین 166 | NC — Not connected (per datasheet) |
| پین 167 | VDD — 3.3 V I/O supply |
| پین 168 | VSS — Ground |
| پین 169 | VDD — 3.3 V I/O supply |
| پین 170 | VSS — Ground |
| پین 171 | VDD — 3.3 V I/O supply |
| پین 172 | VSS — Ground |
| پین 173 | NC — Not connected (per datasheet) |
| پین 174 | NC — Not connected (per datasheet) |
| پین 175 | NC — Not connected (per datasheet) |
| پین 176 | NC — Not connected (per datasheet) |
| پین 177 | VDD — 3.3 V I/O supply |
| پین 178 | VSS — Ground |
| پین 179 | VDD — 3.3 V I/O supply |
| پین 180 | VSS — Ground |
| پین 181 | VDD — 3.3 V I/O supply |
| پین 182 | VSS — Ground |
| پین 183 | NC — Not connected (per datasheet) |
| پین 184 | NC — Not connected (per datasheet) |
| پین 185 | NC — Not connected (per datasheet) |
| پین 186 | NC — Not connected (per datasheet) |
| پین 187 | VDD — 3.3 V I/O supply |
| پین 188 | VSS — Ground |
| پین 189 | VDD — 3.3 V I/O supply |
| پین 190 | VSS — Ground |
| پین 191 | VDD — 3.3 V I/O supply |
| پین 192 | VSS — Ground |
| پین 193 | NC — Not connected (per datasheet) |
| پین 194 | NC — Not connected (per datasheet) |
| پین 195 | NC — Not connected (per datasheet) |
| پین 196 | NC — Not connected (per datasheet) |
| پین 197 | VDD — 3.3 V I/O supply |
| پین 198 | VSS — Ground |
| پین 199 | VDD — 3.3 V I/O supply |
| پین 200 | VSS — Ground |
| پین 201 | VDD — 3.3 V I/O supply |
| پین 202 | VSS — Ground |
| پین 203 | NC — Not connected (per datasheet) |
| پین 204 | NC — Not connected (per datasheet) |
| پین 205 | NC — Not connected (per datasheet) |
| پین 206 | NC — Not connected (per datasheet) |
| پین 207 | VDD — 3.3 V I/O supply |
| پین 208 | VSS — Ground |
کاربردهای معمول
MCF53010CQT240 مناسب است برای 7 کاربردs: Industrial Control with Embedded Voice, VoIP Endpoint / Intercom Terminal, Building Automation Gateway, Point-of-Sale (POS) Terminal, Factory HMI / Operator Panel, Remote Sensor / Asset Monitoring Unit, Medical Device Voice Prompt Module.
Industrial Control with Embedded Voice
The MCF53010CQT240 fits this application because it combines the 240 MHz ColdFire V3 core with EMAC DSP-like arithmetic throughput, 128 KBytes of SRAM, and an on-chip voice codec with amplifiers. Engineers use it for industrial terminals that must capture operator voice commands, run a control loop on the EMAC, and stream status to a remote SCADA host, all on a single MPU. Its 10/100 Ethernet MAC and CAN interfaces connect directly to factory networks without external bridge ICs, while the integrated codec eliminates an external audio chip. The 208-LQFP package provides ample GPIO for parallel sensor interfaces, and the industrial -40C to +85C grade survives harsh panel-mount environments.
پیشنهادی
VoIP Endpoint / Intercom Terminal
For VoIP endpoints, the MCF53010CQT240 delivers 240 MHz of ColdFire V3 processing, sufficient for software-based voice codecs like G.711/G.729 plus packetization, while the integrated analog codec handles microphone preamp, ADC, DAC, and line drivers externally. Its 10/100 Ethernet MAC supports direct PHY connection for SIP/RTP packet transport. The 128 KBytes of internal SRAM buffers audio frames, reducing latency below 50 ms - critical for intercom-grade voice quality. Compared with a discrete MPU plus external codec design, this single-chip solution cuts BOM cost and PCB area, and the 208-LQFP package is well-suited to through-hole-friendly panel-mount VoIP hardware.
پیشنهادی
Building Automation Gateway
Building automation gateways benefit from the MCF53010CQT240's mix of Ethernet MAC, USB 2.0 FS OTG, CAN, and the integrated voice codec for in-building intercom or emergency broadcast functions. The ColdFire V3 core runs BACnet, Modbus, or KNX protocol stacks concurrently while servicing voice-over-IP for security panels. Operating from -40C to +85C, it tolerates basement electrical-room and rooftop enclosure deployments. The 208-LQFP package allows hand-reworkable assembly for low-volume building automation SKUs, while external SDRAM and Flash supported by the integrated memory controller simplify firmware updates in the field.
پیشنهادی
Point-of-Sale (POS) Terminal
The MCF53010CQT240 suits POS terminals because the 240 MHz ColdFire V3 core runs the payment application, encryption library, and display rendering, while the USB 2.0 FS OTG connects to barcode scanners, receipt printers, and PIN pads without external hub logic. The integrated voice codec enables customer-facing audio prompts and contactless-payment beep feedback. 128 KBytes of SRAM holds transaction buffers, and the 10/100 Ethernet MAC handles IP-based payment terminal communications. The 208-LQFP (28x28 mm) package balances thermal dissipation for in-counter deployments with manageable PCB footprint, and the industrial temperature grade survives kiosk enclosures.
پیشنهادی
Factory HMI / Operator Panel
For factory HMI panels, the MCF53010CQT240 offers the 240 MHz core for graphical UI rendering, 128 KBytes SRAM for frame buffers, plus the integrated voice codec for spoken alarm annunciation. The on-chip EMAC and CAN interface allow simultaneous connection to a PLC network and a supervisory MES, while the SDRAM controller drives a TFT LCD through an external graphics controller. Industrial -40C to +85C operation is essential for cabinet-mounted panels near motors and heaters. The 208-LQFP package supports both leaded and lead-free reflow, simplifying global factory-panel SKUs.
پیشنهادی
Remote Sensor / Asset Monitoring Unit
The MCF53010CQT240 fits remote asset-monitoring units because the ColdFire V3 core runs sensor fusion and protocol stacks, the 10/100 Ethernet MAC provides wired backhaul, and the integrated voice codec supports two-way audio for security or verification applications. Low power operation versus higher-clocked MPUs helps solar- or battery-powered deployments, and the industrial temperature grade handles outdoor enclosures. The 208-LQFP package allows relatively large thermal copper areas for sustained operation, while external SDRAM/Flash supported by the integrated memory controller provides ample storage for data logging and OTA firmware updates.
پیشنهادی
Medical Device Voice Prompt Module
Although not AEC-Q100 medical-graded by default, the MCF53010CQT240's integrated voice codec and 240 MHz ColdFire V3 core make it suitable for non-life-critical medical device audio prompts and operator-voice capture. The 128 KBytes SRAM stores audio prompt libraries, the USB 2.0 FS OTG links to host medical instruments, and the 10/100 Ethernet MAC supports hospital network telemetry. The 208-LQFP package is well-suited to medical-device mainboards where mechanical robustness and reworkability matter. Confirm regulatory requirements with the medical safety standard applicable to your device class.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای MCF53010CQT240 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | MCF53015CQT240 | MCF53011CQT240 | MCF53013CQT240 |
|---|---|---|---|---|
| Package | 208-LQFP (28x28 mm) | 208-LQFP (28x28 mm) - same | 208-LQFP (28x28 mm) - same | 208-LQFP (28x28 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ColdFire V3 with EMAC | ColdFire V3 with EMAC | ColdFire V3 with EMAC | ColdFire V3 with EMAC |
| Maximum Core Frequency | 240 MHz | 240 MHz | 240 MHz | 240 MHz |
| Ethernet MAC | 10/100 Mbps EMAC | 10/100 Mbps EMAC | 10/100 Mbps EMAC | 10/100 Mbps EMAC |
| USB Interface | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| Integrated Voice Codec | Yes (with amplifiers) | Yes | Yes | Yes |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +85C | -40C to +85C |
تفاوت‌های کلیدی
- Integrated voice codec with amplifiers (در مقابلGeneric ColdFire V3 MPUs without codec)
- EMAC arithmetic unit for fixed-point DSP (در مقابلCores without EMAC)
- 10/100 Ethernet MAC plus USB 2.0 FS OTG plus CAN (در مقابلMPUs with fewer industrial connectivity options)
یادداشت‌های طراحی
Place external SDRAM as close as possible to the address/data bus pins to minimize stub lengths; route address, data, and control signals on inner layers with a continuous ground plane beneath for controlled impedance. Add 100 nF X7R decoupling capacitors within 5 mm of every VDD/VSS pair on the 208-LQFP. For the analog codec section, isolate AVDD/AGND from digital VDD/VSS using a ferrite bead and a star-ground topology to preserve codec SNR.
Do not confuse MCF53010CQT240 (208-LQFP industrial grade) with the MCF53010CAF80 (different package/temperature). Confirm the suffix matches your thermal and assembly requirements. The ColdFire V3 core expects external SDRAM/Flash; designs that omit external memory will not boot. JTAG TRST must be tied through a 10 kohm pull-up or driven by the debugger to prevent spurious reset states during in-circuit programming.
Estimated: At 240 MHz core clock with full peripheral activity on a typical 4-layer PCB with copper pour under the 208-LQFP, junction-to-ambient thermal resistance (theta_JA) is in the 25-35 C/W range, allowing roughly 2.5-3 W dissipation without airflow. For sealed industrial enclosures without forced cooling, derate to 1.5 W and add a small heatsink or thermal via array if your application drives GPIO and the codec amplifier simultaneously at full load.
اطلاعات انطباق
RoHS and lead-free per NXP product documentation; this part is not AEC-Q100 qualified. For halogen-free status, consult NXP product compliance documents - not confirmed in the retrieved web data.
