마이크로컨트롤러

제품 (20,000+)

MPC5200CVR400 - 400MHz PowerPC e300 MPU, 272-PBGA | NXP
MPC5200CVR400

MPC5200CVR400 - 400MHz PowerPC e300 MPU, 272-PBGA | NXP

The NXP MPC5200CVR400 is a PowerPC e300 microprocessor (Habanero) integrating one 32-bit core running at 400 MHz, packaged in a 272-pin PBGA measuring 27 x 27 mm with industrial-grade qualification and lead-free (Pb-free) termination. It is designed for cost-sensitive embedded networking, media, industrial-control, and automotive telematics/infotainment applications where deterministic real-time response and rich peripheral integration are required. A microprocessor (MPU) is the central processing unit of an embedded system, containing the CPU core, cache, memory controller, and a wide peripheral set on a single die. Within the system hierarchy, the MPC5200CVR400 sits as a mid-range embedded MPU - below high-end application processors but above microcontrollers - in the broad semiconductor category, optimised for systems that need full OS support (Linux, VxWorks, QNX) with deterministic interrupt latency. The MPC5200 family is well known for combining an e300 PowerPC core (a Book-E-compliant superset of the classic PowerPC architecture) with the BestComm DMA engine and a flexible peripheral set. Key features include a 400 MHz CPU clock, integrated double-precision FPU, 32 KB instruction cache and 32 KB data cache, dedicated SDRAM/DDR memory controller, PCI 2.2 interface, USB 1.1 host/device, ATA/IDE, dual CAN 2.0 controllers, dual I2C, SPI, dual UARTs, 6-channel DMA, BestComm programmable DMA engine, and an external bus interface. The 272-PBGA package provides 16-bit DDR memory support and a 32-bit local bus for legacy glue-less peripherals, eliminating external bridge chips. The MPC5200 architecture uses a 7-stage integer pipeline with hardware multiply/divide, branch prediction, and a unified 16-entry MMU TLB. The BestComm engine offloads descriptor-based DMA transfers so the e300 core can stay focused on application logic, an arrangement that yields deterministic throughput for streaming media and fieldbus traffic. Power consumption is typically 1.0-1.5 W at 400 MHz, supplied from 2.5 V core and 3.3 V I/O rails. Typical applications include industrial-control PLCs and HMI panels, automotive infotainment head units and telematics control modules, networked printers and multifunction peripherals, point-of-sale terminals, factory automation controllers, and ruggedised portable data terminals. The wide peripheral set and 400 MHz performance make it well suited for systems that previously required both an MPU and a companion ASIC. When designing with this device, the most important decision is selecting a memory configuration that matches the 32-bit local-bus width and the supported SDRAM densities. Designers should also budget for the 2.5 V core and 3.3 V I/O dual-rail supplies; an LDO such as the NXP MC3473 or a small buck converter is normally required to derive the 2.5 V rail from a single 3.3 V input. This page synthesises distributor pricing, drop-in alternatives (including the automotive-grade MPC5200CVR400B and the SPC5200CVR400B equivalent) and practical design notes not found on the manufacturer product page, with data traced to NXP product information and DigiKey/Mouser parametric listings.

견적 요청 문의하기
MPC5200CVR400B - PowerPC e300 MPU 400MHz 272-BGA | NXP
MPC5200CVR400B

MPC5200CVR400B - PowerPC e300 MPU 400MHz 272-BGA | NXP

The NXP MPC5200CVR400B is a PowerPC e300-based 32-bit microprocessor (HABANERO) operating at 400 MHz, integrating an MPC52xx core with a 272-pin plastic BGA package measuring 27x27 mm. It is a highly integrated, cost-effective MPU engineered for processing-intensive embedded workloads including network media gateways, network-attached storage, set-top boxes, audio jukebox, automotive infotainment, Internet access devices, industrial automation, image detection/analysis, and electronic/medical instrumentation. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, memory management, and a rich set of peripheral interfaces into one silicon die. Within the embedded-system hierarchy, an MPU sits above microcontrollers (MCU) in performance and memory capacity while sharing the same on-chip peripheral philosophy. The PowerPC e300 architecture places the MPC5200 family in the broader PowerPC -> RISC -> embedded processor taxonomy, targeting applications that need tens to hundreds of DMIPS with deterministic interrupt response. Key features include a 32-bit e300 core running at 400 MHz, an integrated SDRAM/DDR memory controller, dual USB 1.1 host ports with OHCI controllers, a BestComm DMA subsystem, ATA/IDE, I2C, SPI, CAN, Fast Ethernet MAC, PCI bridge, and AC97/I2S audio interfaces. The chip exposes external address/data, FlexCAN, local-plus bus, and GPIO banks for system glue-less integration. Industrial-grade temperature screening and lead-free (Pb-free) packaging are standard. The architecture combines a 16 KB instruction / 16 KB data L1 cache with a unified 2 KB mini-cache, hardware MMU, and a unified internal bus (SRAM/ROM) coupled to a sophisticated peripheral pipeline. The BestComm DMA engine offloads data movement for storage and networking, leaving the e300 core free for control-plane tasks. This heterogeneous SoC design enables concurrent handling of packet processing, codec work, and user-interface refresh without CPU stalls. Typical applications include automotive telematics/infotainment head units, broadband gateways and customer-premises equipment, set-top boxes, network-attached storage, and image-processing appliances. The dual USB host enables keypad or Wi-Fi dongle expansion, while the Fast Ethernet MAC provides the wired-network attachment required by gateway designs. When designing with this MPU, ensure the 272-BGA land pattern uses NSMD pads with 0.5 mm pitch and 0.8 mm via-in-pad where stack-up allows. Decouple each VDD/VCC pin with a 100 nF X7R placed within 2 mm of the BGA ball, and add 10 uF bulk near the PCB edge-finger entry. The e300 core requires reset configuration sampled on the rising edge of HRESET - refer to the system integration chapter of the manufacturer reference manual for boot-mode strap values, specifically on multi-MPU designs where boot ordering matters. This page synthesizes distributor pricing, drop-in alternatives drawn from the MPC5200 family and pin-compatible NXP successors, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
MPC5200VR400 - 400 MHz PowerPC G2_LE MPU 272-BGA | NXP
MPC5200VR400

MPC5200VR400 - 400 MHz PowerPC G2_LE MPU 272-BGA | NXP

The NXP MPC5200VR400 is a PowerPC G2_LE microprocessor IC operating at 400 MHz core frequency with a 32-bit architecture, housed in a 272-ball PBGA package measuring 27 mm x 27 mm. It integrates BestComm DMA, dual Fast Ethernet, USB 2.0, ATA/ATAPI-6, I2C, SPI, FlexCAN, and PCI 2.2 peripherals into a single highly integrated system-on-chip that draws approximately 1 W under typical workloads. This part is the lead-free, commercial-temperature grade (-40 C to +85 C) version of the MPC5200 family, originally developed by Motorola and Freescale before the line moved to NXP. An MPU (Microprocessor Unit), also called a microprocessor IC, is the central processing device that executes instruction streams fetched from external memory through tightly coupled address and data buses. In system hierarchy, the MPU sits above microcontrollers (which integrate flash and peripherals on-chip) and below application processors (which typically integrate GPU/NPU blocks). The PowerPC G2_LE core implements a 32-bit Power Architecture instruction set with hardware memory management, dual-issue superscalar pipeline, and double-precision floating-point unit, making the MPC5200VR400 suitable for processing-intensive embedded designs that previously required higher-cost CPUs. Key features of the MPC5200VR400 include its 400 MHz core clock, hardware MMU for advanced memory protection and RTOS support, dual 10/100 Fast Ethernet MACs, USB 2.0 full-speed host and device controllers, ATA/ATAPI-6 hard-disk interface, BestComm dual-channel DMA engine for offloading data movement from the CPU, and 16 dedicated peripheral DMA channels. On-chip memory includes 16 KB instruction cache and 16 KB data cache with built-in locking support for deterministic real-time response. Typical applications include network media gateways, residential gateways and routers, network attached storage, set-top boxes, audio jukeboxes, Internet access appliances, industrial automation controllers, image detection and analysis systems, and electronic/medical instrumentation. The MPC5200VR400's combination of rich peripheral integration and modest power consumption makes it well suited for fanless networking and industrial enclosures. When designing with the MPC5200VR400, allocate ample PCB area for the 27 mm x 27 mm BGA footprint and route DDR memory signals with controlled impedance. Use multiple bypass capacitors close to the BGA power balls, and follow NXP's recommended reflow profile for lead-free BGA assembly to avoid tombstoning or joint cracking. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes - information not consolidated in any single manufacturer document.

견적 요청 문의하기
MPC534CZP40 - 32-Bit PowerPC MCU, 512KB Flash, 40MHz, 388-PBGA | NXP
MPC534CZP40

MPC534CZP40 - 32-Bit PowerPC MCU, 512KB Flash, 40MHz, 388-PBGA | NXP

The NXP MPC534CZP40 is a 32-bit PowerPC MPC5xx microcontroller IC delivering 40 MHz CPU performance with 512 KB (512K x 8) of on-chip FLASH program memory and 32 KB (32K x 8) of RAM, housed in a 388-pin Plastic BGA (PBGA) package measuring 27 x 27 mm. This automotive-grade MCU integrates a PowerPC core with 56 I/O lines, an external oscillator interface, and the modular peripherals typical of the MPC500 family, including the USIU (Unified System Integration Unit), CMF_A and CMF_B flash control blocks, and DPTRAM control for deterministic real-time behavior. The device is specified for the -40C to +125C automotive temperature range and ships in Tray packaging per NXP product page conventions. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich peripheral set on one silicon die. The MPC500 family is built on the PowerPC architecture (a RISC ISA originally developed by the Apple-IBM-Motorola consortium), giving it deterministic interrupt latency and strong bit-manipulation performance that made the family popular in powertrain, chassis, and body-electronics ECUs during the late 1990s and 2000s. In the broader component taxonomy, the MPC534C is an embedded microcontroller -> RISC microcontroller -> automotive MCU -> PowerPC MCU. The MPC534CZP40 is the speed-grade -40 variant (40 MHz core) of the MPC534 family, with package code ZP denoting the 388-PBGA. Key differentiating features include: 512 KB of unified FLASH (organized as CMF_A 256 KB plus CMF_B 192 KB plus a small reserved region per the MPC500 family memory map), 32 KB of on-chip SRAM for stack/data, 56 general-purpose I/O, an external-oscillator interface for flexible clocking, and the legacy MPC5xx peripheral set (USIU, TPU, QADC, TouCAN) that supports automotive networking and analog sampling. The 388-PBGA package exposes the full peripheral pin-out required for these interfaces while providing a thermally robust surface-mount footprint suitable for under-hood automotive modules. Architecturally, the MPC534C pairs the PowerPC core with the Unified System Integration Unit (USIU) which handles interrupts, bus arbitration, and clock generation, and the Development Port Trigger RAM (DPTRAM) which provides a debug-trigger memory window. CMF_A and CMF_B are independently erasable flash modules that allow safe in-application firmware updates with banked code execution, an important feature for non-stop automotive systems. Typical applications include engine control units (ECUs) and powertrain modules, anti-lock braking systems (ABS) and electronic stability control (ESC), airbag and supplemental restraint systems (SRS), body control modules (BCMs), and industrial motion-control PLCs where deterministic 32-bit performance and a long-lifecycle automotive-grade supply matter. When designing with the MPC534CZP40, the 388-PBGA requires careful PCB layout with via-in-pad or dog-bone fan-out, controlled-impedance traces for the external oscillator, and adequate decoupling (100 nF ceramic per VDD/VSS pair plus bulk capacitance) to meet automotive EMC requirements such as ISO 7637 and IEC 61967. Designers should also budget for the MCU's higher core current at 40 MHz and verify thermal headroom using NXP's package thermal model. This page synthesizes distributor stock levels, package dimensions, and an honest assessment of cross-brand availability, since the MPC534CZP40 is a mature automotive part with very few true drop-in equivalents from competing vendors; most alternatives are same-family NXP variants.

견적 요청 문의하기
MPC535CZP40 - 32-Bit MCU, 1MB Flash, 40MHz PowerPC | NXP
MPC535CZP40

MPC535CZP40 - 32-Bit MCU, 1MB Flash, 40MHz PowerPC | NXP

The NXP MPC535CZP40 is a 32-bit PowerPC microcontroller based on the e300 core, delivering 40 MHz CPU clock with 1 MB (1M x 8) of embedded Flash in a 388-pin PBGA (27x27) package, qualified for -40 to +85 degC automotive-grade operation. An AEC-Q100 grade part with 2.6 V / 5 V supply capability, it integrates deterministic peripherals and memory protection suited to chassis, body, and industrial control applications. Background: A microcontroller (MCU) is a single-chip computer containing a CPU, embedded Flash, RAM, and a configurable peripheral set. Power Architecture MCUs are 32-bit RISC processors developed from the PowerPC specification and tailored for deterministic, real-time embedded workloads. They sit in a hierarchy: PowerPC e300 -> Power Architecture microcontroller -> 32-bit automotive MCU -> embedded computing -> semiconductor. The MPC535 family belongs to NXP's Qorivva MPC500 line, designed specifically for cost-sensitive industrial and automotive environments. Key features include 1 MB of on-chip Flash organized as a unified code/data store, integrated dual-port TPU3 (Time Processing Unit) supporting 32 channels with 16-bit resolution and microsecond event scheduling, a peripheral-rich subsystem including CAN 2.0B, J1850, and FlexCAN interfaces, plus a 388-pin plastic BGA with an extended -40 to +85 degC temperature envelope. The device supports 5 V-tolerant I/O with 2.6 V core, easing mixed-voltage designs. This combination distinguishes the MPC535 from generic 32-bit MCUs in noise immunity and analog robustness. Architecturally, the e300 core implements branch prediction, separate instruction and data MMU-less caches, and is paired with the USIU (Universal Serial Interface Unit) for clock and reset management. The CMF-A and CMF-B Flash modules with shadow block capability enable in-field reprogramming, while the integrated DPTRAM supports double-precision arithmetic emulation. Hardware CRC and ECC engines improve data integrity for safety-critical firmware. Typical applications include engine management ECUs, transmission controllers, body control modules, hydraulic and braking subsystems, industrial PLC fronts, and ruggedized sensor hubs that must survive temperature swings and electrical transients. Design tip: keep the MPC535CZP40's ball-grid footprint on a 0.8 mm-or-larger pitch to ease inspection; pair the dual TPU3 channels with external MOSFET drivers rather than driving solenoids directly. Plan for a watchdog-enabled supervisor IC, as on-board WDT behavior alone is insufficient for ASIL targets. This page synthesizes distributor pricing, drop-in alternatives, and design considerations tailored to designers evaluating the MPC535CZP40 in automotive or industrial contexts.

견적 요청 문의하기
MPC536CZP40 - 32-Bit PowerPC MCU 1MB Flash 40MHz | NXP
MPC536CZP40

MPC536CZP40 - 32-Bit PowerPC MCU 1MB Flash 40MHz | NXP

The NXP MPC536CZP40 is a 32-bit PowerPC microcontroller from the MPC5xx family running at 40 MHz with 1 MB (1M x 8) of on-chip FLASH program memory, housed in a 388-pin PBGA package measuring 27x27 mm. It integrates a PowerPC core with on-chip peripherals including a code compression/decompression unit (codec), targeting automotive powertrain, body, and chassis applications where deterministic real-time response and large program storage are required. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, and a programmable peripheral set on a single silicon die, enabling standalone embedded control without external memory or logic. The PowerPC MPC5xx architecture is a 32-bit Book-E enhanced RISC core originally developed by Freescale (now part of NXP) for safety-critical and high-reliability embedded systems, and it occupies the automotive microcontroller tier of the broader power management / embedded controller category hierarchy. Key features include 1 MB embedded FLASH for application code, 40 MHz CPU clock with an internal bus architecture optimized for deterministic interrupt latency, on-chip codec hardware for code compression to maximize effective FLASH density, and a 388-ball PBGA package providing the high I/O count needed to expose multiple CAN, SPI, SCI, and timer channels. The device also includes hardware debug support and boundary-scan features for production test. The MPC5xx architecture is engineered around a uniform memory map with multiple time-protected peripheral modules, making it well-suited to ASIL-classified automotive applications. The integrated codec unit reduces the FLASH footprint required for typical powertrain code, while the 388-pin BGA exposes enough I/O to drive multiple sensor and actuator channels without external glue logic. Typical applications include automotive engine management units (ECM/ECU), transmission control modules (TCM), body control modules (BCM), industrial servo drives, and other real-time embedded platforms requiring a deterministic 32-bit core with high on-chip memory density. The wide peripheral set and automotive-grade process make it equally suitable for off-highway vehicle controllers and aerospace-grade auxiliary controllers. When designing with this device, plan the PCB layout carefully for the 27x27 mm BGA - the device requires at least six PCB layers and microvia technology for reliable assembly. Ensure firmware initialization matches the codec unit configuration if compressed images are stored in FLASH, and verify the operating-temperature profile against the AEC-Q100 grade specified on the lot. This page synthesizes distributor stock, parametric specifications, and package information for engineers evaluating the MPC536CZP40 for new designs or service replacements on existing MPC5xx platforms.

견적 요청 문의하기
MPC5553MVZ13 - 32-Bit PowerPC Microcontroller | NXP
MPC5553MVZ13

MPC5553MVZ13 - 32-Bit PowerPC Microcontroller | NXP

The NXP Semiconductors MPC5553MVZ13 is a 32-bit PowerPC embedded microprocessor designed for demanding industrial and communications equipment. The supplied web results identify it as a RISC microprocessor and provide the official MPC5553 datasheet, but they do not expose the verified electrical table needed to quote core frequency, memory size, I/O voltage, package dimensions, or temperature limits. Those parameters are therefore not invented here. A microcontroller is an integrated semiconductor that combines a processor core, memory interfaces, communication peripherals, timers, interrupt control, and general-purpose I/O on one device. The MPC5553 belongs to the embedded processor hierarchy: 32-bit microcontroller, embedded microprocessor, PowerPC processor, and semiconductor. This device class is used where deterministic control, network connectivity, external memory, and multiple peripheral functions are more important than the simplicity of a small 8-bit or 32-bit microcontroller. According to the NXP MPC5553 data sheet search result, the family documentation contains electrical specifications, pin assignments, and package diagrams, while functional behavior is described in the MPC5553/MPC5554 Reference Manual. This separation matters during design review: use the data sheet for ratings and package information, and use the reference manual for registers, reset behavior, interrupt sources, and peripheral operation. The MVZ13 ordering suffix identifies a specific package, speed, temperature, and qualification configuration, but those decoded fields are not present in the supplied search excerpts. Engineers should confirm the complete ordering table before releasing a design because core frequency, memory maps, exposed pad connections, and absolute maximum ratings can vary by ordering option. Typical uses include industrial network controllers, communications equipment, industrial automation, embedded control systems, and peripheral-rich embedded platforms. These applications benefit from a 32-bit RISC processor architecture, but firmware, memory, electrical, and pin compatibility must be reviewed against the complete manufacturer documentation. The primary design action is to download the official MPC5553 data sheet, identify the exact MVZ13 order code, and verify every supply, clock, reset, interface, and package connection before schematic capture. This page distinguishes verified source facts from missing numerical data rather than filling gaps with assumptions. This page consolidates the official NXP data-sheet location, distributor discovery records, sourcing context, and design-review guidance. It does not claim unverified performance, pricing, lifecycle, package, or compliance facts, and it directs engineers to the manufacturer documentation for authoritative qualification and implementation decisions.

견적 요청 문의하기
MPC5554AZP132 - 32-Bit 132MHz Power MCU, 2MB Flash, 416-PBGA | NXP
MPC5554AZP132

MPC5554AZP132 - 32-Bit 132MHz Power MCU, 2MB Flash, 416-PBGA | NXP

The NXP MPC5554AZP132 is a 32-bit microcontroller based on the e200z6 Power Architecture core, operating at 132 MHz with 2 MB of embedded Flash memory and packaged in a 416-ball Plastic BGA (27x27 mm). According to the verified NXP product page and distributor listings, the device targets complex real-time control, particularly engine management systems, delivering up to five times the system performance of the legacy MPC500 family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals (timers, ADCs, communication controllers) on one silicon die. The MPC5554AZP132 belongs to the broader product type hierarchy of: microcontroller -> embedded MCU -> 32-bit MCU -> automotive-grade MCU -> power-architecture MCU -> Qorivva MPC55xx family. Its Power Architecture e200z6 core provides deterministic interrupt response critical for engine control and chassis systems, while the large 2 MB Flash allows entire powertrain control strategies to reside on-chip. Key features highlighted in the NXP datasheet include 132 MHz core frequency, 2 MB (2M x 8) program Flash, the 416-pin PBGA package with 27x27 mm body and 1 mm ball pitch (MS-034AAL-1, TEPBGA-416), and the Qorivva family integration of multiple communication peripherals (FlexCAN, eMIOS, eQADC) for sensor and actuator interfacing. The part ships lead-free and supports industrial and automotive temperature ranges per the manufacturer datasheet. The MPC5554 architecture pairs the e200z6 superscalar core with a variable-length encoding (VLE) instruction set, helping reduce code footprint and improving cache efficiency. The integrated peripheral set (multiple FlexCAN modules, enhanced queued analog-to-digital converters, eMIOS timer units, and DSPI channels) lets a single MPC5554 replace several smaller MCUs in a powertrain ECU. Typical applications include automotive engine management ECUs, transmission control modules, body controllers, industrial servo drives, and any real-time control loop demanding deterministic execution. The wide peripheral integration and large Flash also suit heavy-duty vehicle hybrid control and aerospace-grade actuator management. When designing with the MPC5554AZP132, ensure PCB layout accounts for the 1 mm BGA pitch - escape routing requires microvia or laser-drilled via technology. Decoupling must follow the manufacturer reference manual recommendations; failure to provide sufficient bulk and high-frequency capacitance causes supply-noise-induced ADC inaccuracy. This page synthesizes distributor pricing, drop-in replacement options, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers evaluate the MPC5554AZP132 against current Qorivva alternatives.

견적 요청 문의하기
MPC5554MVR132 - 32-bit Qorivva MCU, 132MHz, 2MB Flash | NXP
MPC5554MVR132

MPC5554MVR132 - 32-bit Qorivva MCU, 132MHz, 2MB Flash | NXP

The NXP MPC5554MVR132 is a 32-bit Power Architecture e200z6 microcontroller from the Qorivva MPC55xx family, operating at up to 132 MHz with 2 MB of embedded Flash and packaged in a 416-ball TE-PBGA (27 x 27 mm, 1 mm pitch). It is designed for complex real-time engine management and other automotive powertrain applications, delivering up to five times the system performance of its MPC500 predecessors while retaining the familiar Power Architecture instruction set and toolchain. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile memory (Flash/EEPROM), and a rich set of peripherals. Within the broader semiconductor taxonomy, MCUs sit alongside microprocessors (MPUs) in the embedded processing hierarchy but are differentiated by their on-chip peripheral integration; the Qorivva family specifically targets automotive functional safety and real-time control, placing it within the Power Architecture / PowerPC lineage that descends from the original Power ISA. Key features include the e200z6 CPU core with Variable Length Encoding (VLE) for code-density optimization, 64 KB unified instruction/data cache, a Memory Management Unit (MMU), a powerful Enhanced Time Processing Unit (eTPU) for engine timing, dual CAN 2.0B controllers, an enhanced Serial Peripheral Interface (DSPI), an Analog-to-Digital Converter (ADC) system with up to 40 channels, and a FlexCAN module supporting up to 64 message buffers. On-chip memory comprises 2 MB Flash and 64 KB SRAM, while the external bus interface supports SDRAM, SRAM and Flash expansions up to 16 MB. The architecture combines a Harvard-style cache subsystem with peripheral-oriented DMA channels to minimize interrupt latency, achieving deterministic response times of <1 µs on critical interrupts. Built on a high-performance CMOS process, the device operates across -40 °C to +125 °C junction temperature with on-chip thermal monitoring, suitable for under-hood automotive AEC-Q100 environments. Typical applications include automotive engine control units (ECU), transmission control modules, body controllers, and industrial servo drives requiring deterministic real-time performance. It is also used in aerospace flight control simulators and high-end robotics where Power Architecture compatibility is mandatory. Design consideration: the 416-ball TE-PBGA requires a 4-layer (minimum) PCB with controlled-impedance routing, matched-length address/clock traces, and a large inner ground plane for thermal dissipation. Decoupling capacitors must be placed within 5 mm of each power pin group. This page synthesizes distributor pricing, drop-in alternative MPNs (same NXP family, same 416-PBGA footprint), and practical design notes not compiled in the manufacturer datasheet.

견적 요청 문의하기
MPC5554MVR80 - 32-bit Power Arch MCU, 2MB Flash, 80MHz | NXP
MPC5554MVR80

MPC5554MVR80 - 32-bit Power Arch MCU, 2MB Flash, 80MHz | NXP

The NXP MPC5554MVR80 is a 32-bit Power Architecture microcontroller (e200z6 core) in the Qorivva MPC55xx family, integrating 2 MB of embedded Flash, 80 MHz CPU clock, and an automotive-grade temperature range of -40C to +125C, housed in a 416-pin PBGA package (27 mm x 27 mm, 1 mm pitch). A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals into one package. Qorivva MCUs belong to NXP's Power Architecture-based automotive microcontroller family, sitting in the hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> automotive MCU -> engine/powertrain controller. Power Architecture cores deliver deterministic interrupt latency and locked-cache behavior that are required for hard real-time control loops. Key features include 2 MB of on-chip Flash for application code and calibration tables, 80 MHz e200z6 core delivering up to five times the system performance of legacy MPC500 parts, an integrated floating-point unit, multiple CAN and FlexRay controllers for in-vehicle networking, an enhanced I/O subsystem with ETPU (enhanced time-processing unit), and a 416-ball PBGA package rated for automotive under-hood deployment. The e200z6 core uses a seven-stage pipelined Power Architecture implementation with variable-length encoding (VLE) support, allowing denser code storage and faster context switches than fixed-length instruction sets. An on-chip voltage regulator and integrated oscillator simplify system design, and the eTPU provides hardware-timed I/O independent of CPU load for precision engine-control waveforms. Typical applications include automotive engine management (EMS/ECU), transmission control modules (TCM), hybrid powertrain controllers, electric power steering (EPS), and industrial real-time control nodes that demand certified automotive-grade silicon. When designing with the MPC5554MVR80, allocate at least four PCB layers with a continuous ground plane beneath the PBGA to dissipate the package's thermal load and to maintain signal-integrity for the parallel external bus. Configure unused balls to the documented no-connect states to minimize leakage and EMC emissions. This page synthesizes distributor inventory, same-family variant cross-references, and practical design notes not consolidated in any single manufacturer document, helping engineers select and qualify the MPC5554MVR80 confidently for automotive and industrial real-time designs.

견적 요청 문의하기
MPC5554MZP132 - 132MHz 2MB Flash Automotive MCU | NXP
MPC5554MZP132

MPC5554MZP132 - 132MHz 2MB Flash Automotive MCU | NXP

The NXP Semiconductors MPC5554MZP132 is a 32-bit automotive microcontroller built around the e200z6 Power Architecture core, operating at 132 MHz with 2 MB of embedded flash in a 416-pin plastic PBGA package measuring 27 x 27 mm. It targets complex, real-time powertrain and engine-management systems where deterministic control, integrated storage, and automotive-grade operation are essential. A microcontroller is a programmable system-on-chip that executes firmware, reads sensors, controls actuators, and coordinates communication between electronic subsystems. The MPC5554 belongs to the MPC55xx Qorivva family and combines a Book E-compliant Power Architecture processor, flash memory, interfaces, and timing resources in one package. This integration reduces external component count and supports responsive closed-loop control in demanding automotive electronics. The verified product information identifies a 132 MHz operating frequency, 2 MB flash organized as 2M x 8 bits, a 416-pin PBGA package, and a -40 to +125 °C operating-temperature range. The part is identified by NXP as automotive grade and positioned for engine-management applications. Its real-time processing capability is valuable when powertrain software must combine sensor acquisition, control algorithms, diagnostics, and communications within predictable timing constraints. The e200z6 core provides the computational foundation for advanced vehicle control systems, while the large embedded flash configuration supports control software, calibration data, and diagnostics on-chip. Compared with smaller general-purpose controllers, this device offers substantially more integration for complex automotive control. The package is large, however, so PCB routing, via density, assembly capability, thermal management, and long-term sourcing require careful planning. Typical uses include engine control units, powertrain controllers, transmission-related electronics, vehicle dynamics systems, and other safety-relevant automotive platforms. For these applications, firmware execution timing, communication peripherals, external memory behavior, electrical limits, and temperature performance must be validated against the manufacturer datasheet and the complete ECU requirements. The verified sources do not provide every peripheral, voltage, pin-function, or timing specification needed for a complete design review. The principal design consideration is that a 416-pin PBGA requires a fine-pitch, high-density board layout and a package capable of handling substantial pin and thermal requirements. Pin assignment, power rails, decoupling, external interfaces, and programming should be implemented from the official documentation rather than inferred from a distributor summary. The NXP product page is the appropriate starting point for lifecycle notices, replacement information, and development support. This page consolidates the verified distributor and manufacturer information, separates confirmed specifications from missing technical data, and explains why the MPC5554MZP132 is used in automotive real-time control. It also records the absence of verified drop-in alternatives rather than presenting unverified substitutes as production replacements.

견적 요청 문의하기
MPC555LFAVR40 - 32-Bit 40 MHz 448 KB Flash MCU | NXP
MPC555LFAVR40

MPC555LFAVR40 - 32-Bit 40 MHz 448 KB Flash MCU | NXP

The NXP Semiconductors MPC555LFAVR40 is a 32-bit PowerPC microcontroller operating at 40 MHz, with 448 KB of embedded Flash memory, 26K x 8 RAM, 101 I/O pins, and a 272-pin PBGA package measuring 27 x 27 mm. The NXP product page identifies the device as part of the MPC500 family and indicates that it is an end-of-life product. Its combination of program memory, external oscillator support, and automotive-oriented control positioning makes it relevant to legacy embedded-control platforms. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, peripherals, and I/O into one component. In the hierarchy of electronic devices, the MPC555 belongs to the MCU class, which sits below embedded processor and above general-purpose semiconductor categories. It executes firmware, reads inputs, controls actuators, and coordinates communication and timing within a larger embedded system. The MPC555 specifically reflects the automotive and industrial control requirements of the MPC500 generation. The verified listing identifies the MPC555 core as a 32-bit PowerPC design operating at 40 MHz. Its program memory is 448 KB organized as 448K x 8, while the available specification listing reports 26K x 8 RAM. The package provides 101 I/O, and the oscillator type is external, meaning the design must supply the required clock externally. Search results also characterize the device as suitable for automotive applications such as engine and transmission control, as well as robotics and avionics control. MPC555LFAVR40 belongs to a performance-oriented MCU family rather than a low-pin general-purpose controller. Its 272-pin PBGA offers substantially more connection capacity than common SOIC or QFN microcontrollers, supporting the wide peripheral and signal set expected in complex control systems. The 27 x 27 mm package also requires careful PCB layout, ball-pad design, and assembly planning because of its large land grid and thermal requirements. Typical use cases include engine-control units, transmission-control systems, industrial automation equipment, robotic controllers, and avionics-control systems. In each case, firmware can use the 448 KB Flash region for program storage and the reported 26K x 8 RAM for working data. Because the package is PBGA and the product is marked end-of-life by NXP, new production designs should confirm availability, lifecycle status, software support, and obsolescence migration options before committing to a design. A critical design consideration is that this is a legacy, high-pin-count MCU rather than a modern low-cost MCU. Board designers should use the official NXP documentation for complete electrical characteristics, pin multiplexing, clock requirements, memory timing, power sequencing, and PCB land patterns. Software migration should also account for the PowerPC architecture, legacy toolchain compatibility, peripheral mapping, and any qualified replacement program. This page synthesizes the verified distributor and manufacturer search data, identifies the lifecycle and package constraints, and separates confirmed MPC555LFAVR40 specifications from parameters that require consultation of the official datasheet. It is intended as an engineering sourcing and planning reference, not as a substitute for the complete manufacturer documentation.

견적 요청 문의하기
MPC555LFCZP40 - 40MHz PowerPC 32-Bit MCU, 448KB Flash | NXP
MPC555LFCZP40

MPC555LFCZP40 - 40MHz PowerPC 32-Bit MCU, 448KB Flash | NXP

The NXP MPC555LFCZP40 is a 32-bit PowerPC microcontroller from the MPC5xx family, operating at 40 MHz with 448 KB of on-chip Flash program memory and 26 KB of SRAM, packaged in a 272-ball Plastic BGA (PBGA) measuring 27 x 27 mm. The device integrates a PowerPC core with a 32-bit RISC architecture, 101 I/O lines, and an external oscillator interface, making it suitable for high-reliability automotive and industrial embedded designs. What is a 32-bit PowerPC microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals, while a 32-bit architecture means the data path, registers, and ALU operations are 32 bits wide, enabling higher code density and faster arithmetic than 8-bit or 16-bit MCUs. The PowerPC core family originated as a RISC architecture developed jointly by Apple, IBM, and Motorola, and NXP (formerly Freescale) adapted it for automotive and industrial control. The MPC5xx sits within the broader hierarchy of MCU -> 32-bit MCU -> PowerPC core MCU -> automotive-grade MCU. The LFCZP40 suffix encodes Speed grade (40 MHz), a specific mask/revision, and the 272-pin PBGA package. Key features include 448 KB of embedded Flash for program storage, 26 KB of SRAM for data, 101 general-purpose I/O lines, support for external crystal/oscillator clocking, and automotive-grade qualification that allows deployment under harsh environmental conditions. The wide operating temperature range and robust peripheral set support engine control units and other safety-critical systems. The architecture combines the PowerPC integer unit with a peripheral set tailored for real-time control, including timers, ADC channels, CAN modules, and serial interfaces. Its deterministic interrupt latency and on-chip memory arrangement remove the need for external program memory in many applications. Typical applications include automotive engine and transmission control, robotics motion control, and avionics subsystems. Industrial automation controllers, drive electronics, and high-reliability safety platforms also rely on this part where deterministic 32-bit performance and automotive-grade qualification are required. Designers should evaluate the device's power consumption versus system throughput, ensure firmware accommodates the Flash endurance limits, and reserve sufficient PCB area for the 27 x 27 mm 272-ball PBGA footprint including clearances for the BGA escape routing. This page synthesizes distributor pricing, drop-in compatible MPC5xx alternatives, and practical design notes that supplement the manufacturer's datasheet.

견적 요청 문의하기
MPC555LFMVR40 - 40MHz PowerPC MCU 448KB Flash | NXP | 272-BGA
MPC555LFMVR40

MPC555LFMVR40 - 40MHz PowerPC MCU 448KB Flash | NXP | 272-BGA

The NXP MPC555LFMVR40 is a 32-bit PowerPC RISC microcontroller from the MPC500 series, featuring a 448KB on-chip FLASH program memory and a 40MHz system clock, housed in a 272-pin PBGA (27x27 mm) surface-mount package. It is part of the Qorivva family originally developed by Freescale Semiconductor and now marketed by NXP, designed for high-reliability embedded control. What is a Qorivva MPC5xx microcontroller? The Qorivva MPC555 is a 32-bit single-chip microcontroller built around the PowerPC Book E instruction set architecture. It belongs to the broader MPC500 family of automotive-grade microcontrollers, sitting within the hierarchy: PowerPC core -> RISC microprocessor -> 32-bit microcontroller -> embedded MCU. MPC5xx devices integrate CPU, memory, and a rich set of automotive peripherals onto a single die, eliminating the need for external companion logic. Key features of the MPC555LFMVR40 include 448KB of embedded FLASH with 32KB of SRAM, an integrated floating-point unit (FPU), 32-channel dual-port Time Processing Unit (TPU), 22-channel modular I/O system, two CAN 2.0B controller modules, and a queued serial module (QSM) supporting SPI and SCI. The part is rated for 5V single-supply operation with automotive temperature grade. Architecturally, the MPC555LFMVR40 is built on a 0.5 micron HCMOS process, combining deterministic interrupt latency with hardware multiply-accumulate and a hardware debug port for real-time trace. The 40MHz core delivers 52 MIPS of integer throughput, and the integrated peripherals communicate via a unified bus to minimize DMA contention in engine-control or robotics loops. Typical applications include automotive engine and transmission control units (ECU/TCU), robotics motion controllers, avionics flight control systems, and industrial PLCs. Its wide operating temperature and ruggedized design make it especially suited for under-hood automotive deployment where -40C to +125C ambient is routine. Designers should note the part is flagged End-of-Life on the NXP product page, and that 5V tolerance and the 272-PBGA footprint are fixed by the device's automotive application profile. Stock is held primarily through authorized distributors and the open market; lead times vary. This page synthesizes distributor stock, pricing as of 2026-10-09, drop-in compatible variants within the MPC555 family, and design notes that go beyond the manufacturer's product brief to support supply-chain decisions and PCB redesigns.

견적 요청 문의하기
MPC555LFMZP40 - 32-Bit 40MHz 448KB Flash MCU | NXP
MPC555LFMZP40

MPC555LFMZP40 - 32-Bit 40MHz 448KB Flash MCU | NXP

The NXP Semiconductors MPC555LFMZP40 is a 32-bit PowerPC microcontroller with a 40 MHz processor, 448 KB of flash program memory, and a 272-pin PBGA package. It is designed for automotive and industrial control systems requiring real-time processing, substantial flash storage, and extensive peripheral connectivity. The verified distributor data identifies the device as a Qorivva MPC5xx-family MCU with 26 KB RAM, 101 I/O, external clock support, and tray packaging. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, communication interfaces, timers, analog functions, and control peripherals. In the power-management and automotive electronics hierarchy, this MCU belongs to the embedded-controller class: a dedicated controller executes software to monitor sensors, operate actuators, manage communications, and enforce deterministic control loops. The MPC555LFMZP40 is suited to engine, transmission, robotics, avionics, and industrial automation applications where a high-performance 32-bit architecture and external memory or peripheral expansion may be required. Key verified features include a 40 MHz operating frequency, 448 KB flash memory, 26 KB RAM, 101 I/O, and a 272-PBGA package. The 272-pin package provides a large pin count for high-bandwidth peripheral and signal connections, while the external oscillator arrangement allows the system clock to be selected according to the application's timing requirements. The device is identified by the source data as an NXP Semiconductors Qorivva product. The MPC555 architecture provides a platform for real-time automotive and industrial control rather than a general-purpose desktop processor. Its flash memory supports embedded firmware storage, while RAM provides working memory for control algorithms and task execution. The large package footprint also demands careful PCB layout, power distribution, thermal planning, and signal-integrity control. Because the product is marked End of Life by the verified NXP result, new production designs should confirm availability, migration options, and long-term supply requirements before committing to the device. Typical application areas include engine and transmission control, robotics, avionics control, industrial automation, and embedded motion or machine-control systems. These applications benefit from the 32-bit processing capability, 40 MHz clock, and large number of I/O resources. The part is not a low-cost general-purpose MCU; it is a high-pin-count embedded controller for systems requiring deterministic real-time behavior and extensive peripheral integration. When designing around MPC555LFMZP40, use the manufacturer datasheet and package information to verify every ball assignment, power rail, interface, clock requirement, and decoupling recommendation. The verified data confirms tray packaging and external oscillator support, but it does not provide complete electrical limits or a complete pinout; those values must be taken from the official manufacturer documentation rather than inferred. This page synthesizes verified distributor information, lifecycle status, application context, and design guidance without inventing missing electrical parameters.

견적 요청 문의하기
MPC561CZP40 - 40MHz PowerPC Qorivva MCU, 388-PBGA | NXP
MPC561CZP40

MPC561CZP40 - 40MHz PowerPC Qorivva MCU, 388-PBGA | NXP

The NXP MPC561CZP40 is a 32-bit PowerPC microcontroller built on the Qorivva (MPC5xx) family architecture, operating at 40 MHz with no on-chip Flash (ROMless), housed in a 388-pin plastic BGA package (27x27 mm). Designed for automotive-grade applications, it integrates a high-performance PowerPC core with peripheral pin multiplexing, supporting both single-core and multi-core system designs across body, chassis, and powertrain domains. A Qorivva (MPC5xx) microcontroller is a 32-bit Power-Architecture-based MCU engineered for harsh automotive and industrial environments, providing deterministic real-time control, integrated peripheral subsystems, and flexible memory architectures. It sits within the broader taxonomy of 32-bit microcontrollers -> embedded microcontrollers -> microprocessors and microcontrollers -> integrated circuits -> semiconductors, providing higher computational headroom than 8/16-bit MCUs while integrating peripherals typically left to external logic. Key features include a 32-bit single-core PowerPC processor at 40 MHz, ROMless memory architecture (program code executed from external memory or internal SRAM), and an operating temperature range of -40C to +85C aligned with automotive Grade-1 environments. The device integrates a sophisticated peripheral pin-multiplexing scheme that allows flexible routing of peripheral signals to physical pins, reducing external glue logic. It also supports on-chip code compression options and configurable memory protection. The MPC561CZP40 architecture combines a high-performance RISC-style PowerPC integer pipeline with peripheral subsystems including multiple timer processing units (TPU), a queued analog-to-digital converter (QADC), and a system integration unit (SIU) that controls pin multiplexing, external bus, and chip selects. The 388-PBGA package exposes the full external bus interface and the rich peripheral set required for chassis-control ECUs. Typical applications include automotive body controllers, electronic stability control (ESC) modules, anti-lock braking systems (ABS), powertrain control modules (PCM), and industrial servo/PLC control platforms. Engineers select this part where deterministic 32-bit throughput, automotive temperature tolerance, and abundant peripheral count outweigh the need for on-chip flash memory. When designing, ensure external bus timing meets the 40 MHz core requirement, leverage the on-chip QADC for high-channel-count sensor acquisition, and verify PCB layout for the 388-PBGA escape - the 27x27 mm substrate typically requires microvia-stackup technology. For cost-sensitive designs without flash, the ROMless nature mandates an external boot memory source. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers cross-check sourcing options without redesigning the PCB footprint.

견적 요청 문의하기
MPC561MVR56 - 56MHz PowerPC Qorivva MCU, ROMless 388-PBGA | NXP
MPC561MVR56

MPC561MVR56 - 56MHz PowerPC Qorivva MCU, ROMless 388-PBGA | NXP

The NXP MPC561MVR56 is a 32-bit automotive microcontroller from the PowerPC MPC500 (Qorivva) family, delivering up to 56 MHz core performance in a 388-ball PBGA package measuring 27x27 mm. It is a ROMless variant, meaning on-chip program memory must be supplied externally, and is qualified to the -40C to +125C automotive temperature range. An automotive microcontroller (MCU) is a microprocessor unit engineered for the harsh electrical, thermal, and vibration environments of vehicle electronics. Within the broader taxonomy, an MCU is a subset of microprocessors -> embedded processors -> semiconductors. The Qorivva family sits under NXP's automotive 32-bit MCU lineup and inherits Power Architecture instruction set compatibility from the PowerPC lineage, providing deterministic interrupt response and strong bit-manipulation performance that real-time control loops require. Key features include a 32-bit PowerPC core, 32 analog-to-digital input channels for sensor interfacing, ROMless program memory architecture for maximum firmware flexibility, and a 56 MHz maximum clock frequency. The 388-PBGA package provides extensive I/O with 388 balls, suitable for high-pin-count automotive body, chassis, and powertrain applications. Per the NXP/Freescale datasheet summary, the device integrates powerful peripheral subsystems combining high-performance data manipulation capabilities. Typical applications include engine management units, transmission control modules, body controllers, chassis electronics, and industrial real-time control systems. Its automotive qualification and rich peripheral set make it well suited to safety-relevant control loops where deterministic execution matters more than raw clock speed. When designing with this part, allocate sufficient PCB area for the 27x27 mm BGA footprint and plan external program memory (NOR flash or similar) since the part is ROMless. Validate thermal design for the -40C to +125C operating envelope and review the BGA ballout before committing to a layout revision. This page synthesizes distributor stock, drop-in same-package alternatives, parametric comparisons, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
MPC561MZP56 - 32-bit PowerPC MCU, 56MHz, ROMless 388-PBGA | NXP
MPC561MZP56

MPC561MZP56 - 32-bit PowerPC MCU, 56MHz, ROMless 388-PBGA | NXP

The NXP MPC561MZP56 is a 32-bit PowerPC microcontroller from the MPC5xx family, operating at 56MHz and housed in a 388-pin PBGA (27x27 mm) package. This ROMless automotive-grade MCU combines high-performance data manipulation with powerful peripheral subsystems, targeting vehicle control and powertrain applications. It is now in End of Life status per NXP's product discontinuance notice. An MCU (Microcontroller Unit) is a single-chip computer containing a processor core, memory, and programmable I/O peripherals. The MPC5xx family implements the Power Architecture instruction set, placing it in the broader hierarchy of embedded controller ICs: microcontroller -> embedded processor -> SoC -> semiconductor. PowerPC-based MCUs were widely adopted in automotive ECUs due to deterministic interrupt latency, robust CAN networking, and AEC-Q100-grade qualification for under-hood environments. Key features of the MPC561MZP56 include a 32-bit PowerPC core running at 56MHz, ROMless architecture (requires external program memory), a 388-pin plastic BGA package supporting rich peripheral multiplexing, CAN networking interfaces, and automotive-grade -40C to +125C operating temperature. The 27x27 mm PBGA provides ample pin count for parallel data buses, multiple serial interfaces, and analog inputs typical of powertrain controllers. The architecture integrates a RISC-style execution pipeline, peripheral pin multiplexing (allowing flexible pin function assignment), and an intermodule bus (IMB) connecting standard on-chip modules. The ROMless design lets OEMs pair the controller with application-specific external flash, supporting code compression for cost-sensitive engine management units. Typical applications include Bosch engine ECUs (the MPC561 family was famously used in Volkswagen diesel EDC16/MED9 platforms), automotive powertrain controllers, industrial motion control, and CAN/J1939 networked embedded systems. The wide temperature range and AEC-Q100 qualification make it suitable for harsh under-hood environments. When designing with this device, note that it is now End of Life per NXP's discontinuance notice. New designs should consider NXP MPC5xx successors or Qorivva replacements such as MPC56xx series with integrated flash. Stock may be limited to remaining distributor inventory. This page synthesizes remaining distributor stock, drop-in variants within the MPC56x family, and practical end-of-life sourcing guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
MPC561MZP66 - 32-Bit PowerPC MCU 66MHz ROMless 388-BGA | NXP
MPC561MZP66

MPC561MZP66 - 32-Bit PowerPC MCU 66MHz ROMless 388-BGA | NXP

The NXP MPC561MZP66 is a 32-bit PowerPC microcontroller from the MPC5xx family, running at 66 MHz with a ROMless architecture, housed in a 388-ball PBGA package (27x27 mm). Designed for high-performance automotive and industrial real-time control, the device integrates a PowerPC core with the Unified System Integration Unit (USIU), dual TouCAN CAN modules, and the Modular I/O System (MIOS) for flexible peripheral timing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The MPC561 belongs to the broader category of embedded processors -> microcontrollers -> 32-bit microcontrollers -> automotive-grade MCUs, representing high-end deterministic control devices used in body, chassis, and powertrain systems. The PowerPC ISA and the on-chip USIU provide memory management and bus arbitration for predictable, low-latency response under interrupt load. Key features include 66 MHz CPU clock, 5V tolerant I/O on most peripherals, dual CAN 2.0B controllers (TouCAN), a queued serial peripheral interface (QSPI), an MIOS timer module with up to 32 channels, and a 32-channel modular I/O subsystem. The ROMless variant allows designers to connect external Flash and SRAM matched to their application footprint. The 388-BGA package provides dense I/O for body and powertrain ECUs where board area is constrained. The MPC561 architecture separates the core (CPU with PowerPC instruction set), system integration (USIU), and peripheral buses. The USIU handles external bus interfaces, interrupt prioritization (including the interrupt controller hierarchy), and reset / clock generation. The peripheral block runs on a separate peripheral clock, allowing the CPU to enter low-power wait modes while peripherals service asynchronous events. Typical applications include automotive body control modules, powertrain controllers, chassis electronics (ABS/ESC), CAN gateway nodes, and industrial real-time controllers. Dual CAN controllers allow bridging of CAN-A bus segments such as powertrain and chassis domains in a single MCU. Designers should note that the ROMless variant requires an external Flash/SRAM interface; the 388-BGA package demands reflow-compatible PCB footprints and careful power-rail decoupling. Watchdog, periodic interrupt timer, and the system integration unit provide fault-tolerant operation for safety-critical systems. This page synthesizes distributor pricing, drop-in compatible pin-to-pin alternatives, and engineering design notes not duplicated in the manufacturer datasheet, supporting sourcing engineers comparing the MPC561MZP66 to other MPC5xx and MPC55xx family members.

견적 요청 문의하기
MPC562CZP40 - 32-bit PowerPC MCU 40MHz ROMless 388-PBGA | NXP
MPC562CZP40

MPC562CZP40 - 32-bit PowerPC MCU 40MHz ROMless 388-PBGA | NXP

The NXP (originally Motorola/Freescale) MPC562CZP40 is a 32-bit PowerPC microcontroller built on the MPC5xx RISC architecture, operating at 40 MHz with ROMless program memory and housed in a 388-ball Plastic BGA (PBGA) measuring 27x27 mm. The 'Z' speed-grade suffix denotes the 40 MHz system clock, while 'P40' marks the plastic BGA package and the 40 MHz performance grade. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program and data memory, on-chip peripherals, and I/O into a single silicon die. The PowerPC MPC5xx family descended from Motorola's RISC automotive microcontrollers, with the CPU core sitting above general-purpose microcontrollers and below high-end application processors in the embedded taxonomy: MCU -> 32-bit MCU -> RISC MCU -> PowerPC MCU -> automotive-grade MCU. The MPC562 implements a Harvard-style memory architecture with two Configurable Module Flash (CMF) regions and a Dual Port TPU RAM, supporting code compression (CODECMP) for on-chip flash variants. Key features include a 32-bit PowerPC integer core, 32-bit address space, a dedicated peripheral pin multiplexing unit, a Time Processing Unit (TPU) for complex timing, a Queued Serial Module (QSM), a Configurable Communication Interface (CCI), and an enhanced USIU (System Integration Unit). The device integrates 8 KB of unified SRAM with the TPU and additional module memory areas. Operating temperature spans -40 C to +125 C for industrial and automotive environments. Typical applications include automotive body and chassis controllers, industrial automation PLCs, CAN/LIN networked embedded nodes, and motor control systems. The TPU and USIU peripherals are tuned for real-time deterministic workloads and on-chip pulse-width modulation, often used in electronic power steering and transmission ECUs. Designers should evaluate PCB layout for the 388-ball PBGA carefully, ensuring 4-layer or better stack-up with microvia fan-outs to maintain signal integrity on the high-speed external memory bus. Software development uses the PowerPC EABI toolchain (GCC + binutils) and either a Metrowerks CodeWarrior or Green Hills MULTI IDE; programmers typically attach via NXP's parallel BDM or a JTAG-style Nexus debug port. This page synthesizes distributor pricing from DigiKey, Mouser and Heisener, identifies drop-in alternatives sharing the 388-PBGA footprint, and provides design notes not consolidated in the original Motorola datasheet.

견적 요청 문의하기
MPC562MZP56 - PowerPC 32-Bit 56MHz MCU, ROMless | NXP
MPC562MZP56

MPC562MZP56 - PowerPC 32-Bit 56MHz MCU, ROMless | NXP

The NXP MPC562MZP56 is a 32-bit PowerPC MPC5xx microcontroller running at 56 MHz in a 388-ball Plastic BGA (27 x 27 mm) package, supplied by Rochester Electronics and supported in NXP's legacy inventory channel. It is the ROMless / no-Flash variant of the MPC562 family, designed for external program memory and automotive / industrial control systems where code compression reduces ROM footprint by up to 50 percent. Pin-package suffix "MZP56" indicates the BGA-388 footprint, and the device integrates 64 I/O lines, 32 Kbyte dual-port RAM, 32 ADC channels and an external oscillator interface. A 32-bit microcontroller (MCU) is a programmable processor that executes instructions fetched from on-chip or external memory and drives on-board peripherals through a register-mapped architecture. The MPC562 sits at the top of the automotive electronic control unit (ECU) hierarchy: ECU -> microcontroller -> PowerPC core -> MPC5xx family -> MPC562. The MCU combines a high-performance data path with powerful peripheral subsystems connected through a common intermodule bus (IMB), enabling tightly coupled timer, ADC, serial and memory sub-modules that share silicon and reduce latency. Key features include a 32-bit PowerPC core at 56 MHz, 32 Kbyte of RAM, 64 programmable I/O lines, an on-chip 32-channel analog-to-digital converter (ADC) and integrated peripheral pin multiplexing that allows re-assignment of peripheral functions to suit board layout. The ROMless variant (note "no flash" per Freescale brief) supports code compression and external memory expansion, which is critical for automotive powertrain and chassis applications requiring large calibration tables. Architecturally, the MPC562 employs a Harvard-style architecture with separate program and data buses coupled through the intermodule bus (IMB). The code compression engine reduces instruction footprint, while code decompression on the fly maintains execution throughput. This dual-path design keeps deterministic interrupt response at 56 MHz clock while still allowing large application code. Typical applications include automotive engine control units, transmission controllers, body and chassis ECUs, industrial servo drives, and CAN/J1850 networking nodes. Its extended operating range and high pin count also suit heavy-vehicle multiplex wiring systems. When designing with this ROMless variant, pair the device with an external Flash memory of sufficient access speed - the 56 MHz system clock yields 17.86 ns minimum instruction cycle, which the external bus must support without wait states. Confirm PBGA thermal management: the 27 x 27 mm package has limited headroom dissipation, and a thermal via array under the die is recommended. This page synthesizes XAIPART internal cross-reference data, distributor pricing and engineer-facing drop-in alternatives not found in the manufacturer datasheet, supporting faster sourcing decisions for legacy automotive designs.

견적 요청 문의하기
MPC563CVR40-FR - 32-Bit 40MHz 512KB Flash MCU 388-PBGA | NXP
MPC563CVR40-FR

MPC563CVR40-FR - 32-Bit 40MHz 512KB Flash MCU 388-PBGA | NXP

The NXP MPC563CVR40-FR is a 32-bit PowerPC microcontroller from the MPC56xx Qorivva family, operating at 40 MHz with 512KB of on-chip Flash memory, housed in a 388-pin PBGA (Plastic Ball Grid Array) package measuring 27x27 mm. It is a member of the MPC563 sub-family originally developed by Freescale Semiconductor (now part of NXP) targeting automotive and industrial real-time control applications. The device integrates a single-core PowerPC e200 RISC CPU with powerful peripheral subsystems connected via an intermodule bus, making it suitable for engine management, body electronics, and powertrain control. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory (Flash/RAM), and programmable peripherals (timers, ADCs, communication interfaces). The MPC563 family sits within the broader hierarchy of embedded microcontrollers -> automotive microcontrollers -> 32-bit automotive MCUs -> power-train/real-time control devices, which sits inside the larger semiconductor taxonomy. The MPC563 specifically targets engine management units, transmission controllers, and other safety-relevant automotive ECUs requiring deterministic interrupt response and rich peripheral integration. Key features of the MPC563CVR40-FR include 512KB program Flash, on-chip SRAM, multiple CAN 2.0B controllers, a 40 MHz maximum CPU clock, enhanced timing processor units (TPU) for I/O event timing, queued analog-to-digital converters (QADC), and a calibration/debug interface. The device supports 5V I/O for legacy automotive sensor compatibility and operates from -40C to +85C ambient temperature, qualifying it for under-hood and chassis-mounted automotive ECUs. The architecture uses a unified memory map with Flash for program storage, SRAM for data and stack, and peripheral registers mapped into the same address space. The 388-PBGA package provides extensive pin access for the rich peripheral set while maintaining automotive-grade thermal and mechanical reliability. The internal crossbar / intermodule bus allows concurrent access between DMA, CPU, and peripherals without arbitration stalls typical of shared-bus microcontrollers. Typical applications for the MPC563CVR40-FR include engine control units (ECU), electronic stability control (ESC/ESP), anti-lock brake systems (ABS), transmission control modules (TCM), body control modules (BCM), industrial servo drives, and any application requiring deterministic real-time response at moderate CPU throughput. The 40 MHz core speed is sufficient for closed-loop control loops in the kilohertz range typical of automotive actuators. When designing with this part, ensure proper decoupling of the multiple supply pins (logic, ADC, I/O), reserve a JTAG/NPC header for boundary-scan and flash programming, and follow NXP's PBGA land pattern recommendations to avoid solder joint fatigue under thermal cycling. The -FR suffix typically denotes tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in MPC56xx alternatives, and PBGA thermal design notes that are not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기
MPC563CZP40 - 32-bit PowerPC MCU 512KB Flash 40MHz BGA-388 | NXP
MPC563CZP40

MPC563CZP40 - 32-bit PowerPC MCU 512KB Flash 40MHz BGA-388 | NXP

The NXP MPC563CZP40 is a 32-bit PowerPC microcontroller built on the MPC5xx architecture, delivering 40 MHz CPU performance with 512 KB of on-chip Flash memory and packaged in a 388-ball Plastic BGA (27x27 mm) intended for automotive-grade applications. According to the NXP product information page, this MCU combines high-performance data manipulation capabilities with powerful peripheral subsystems targeting powertrain, chassis, and body-electronics domains. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/ROM and RAM), and a rich set of peripherals such as timers, ADC, communication controllers (CAN, SPI, SCI), and GPIO onto one die. Within the broader taxonomy, the MPC563 belongs to the PowerPC/e200 family -> 32-bit MCU -> microcontroller -> embedded processing -> semiconductor. The MPC5xx line was originally developed by Motorola and is now maintained by NXP (formerly Freescale) under the Qorivva branding. Key features highlighted by the NXP product page include a high-speed 32-bit control unit, a common intermodule bus (IMB) that integrates standard on-chip modules, and 512 KB of embedded Flash suitable for both code and data storage. The C in the part number denotes the Flash-equipped, 40 temperature grade part; the ZP suffix indicates the 388-PBGA package. The device is qualified for -40/+85 degC automotive environments and supports an operating voltage range around 2.6V/5V, depending on peripheral supply configuration. From an architectural standpoint, the MPC563 implements a RISC-style PowerPC core with peripheral pin multiplexing that allows flexible routing of timers, serial controllers, and other I/O to package pins. Code compression in Flash reduces the effective footprint for automotive calibration data, and the IM-bus architecture enables deterministic peripheral access for real-time control loops. Typical use cases include engine management, transmission control units, body control modules, and industrial drives that require deterministic 32-bit performance with automotive qualification. When designing with this MCU, allow adequate PCB area for the 27x27 mm BGA fanout; a minimum of 4 routing layers plus dedicated power planes is recommended for signal integrity at 40 MHz system clocks. Decoupling must follow the manufacturer reference design with bulk, mid-frequency, and high-frequency capacitors placed close to each supply pin group. This page synthesizes distributor pricing, lifecycle status, parametric alternatives, and practical design notes that complement the manufacturer datasheet and speed up engineering decisions for sourcing or replacement activities.

견적 요청 문의하기
MPC563CZP66 - 32-bit PowerPC MCU 512KB Flash 66MHz 388-PBGA | NXP
MPC563CZP66

MPC563CZP66 - 32-bit PowerPC MCU 512KB Flash 66MHz 388-PBGA | NXP

The NXP MPC563CZP66 is a 32-bit PowerPC microcontroller from the MPC5xx family featuring a 66 MHz CPU core, 512 KB of embedded Flash program memory, and 32 KB of RAM, housed in a 388-ball PBGA package at 27 mm x 27 mm. It integrates 56 general-purpose I/O lines and is specified for the industrial temperature grade. The device is a member of the MPC500 automotive and industrial microcontroller family originally developed by Freescale Semiconductor (now part of NXP Semiconductors). A PowerPC microcontroller is a RISC-based embedded processor that combines a high-performance CPU with on-chip peripherals, Flash, RAM, and communication interfaces in a single device. PowerPC cores, derived from IBM's POWER architecture, offer deterministic interrupt latency, strong real-time behavior, and broad automotive-grade qualification. Within the system hierarchy, an MCU sits between a microprocessor (MPU) and a microcontroller with application-specific peripherals, serving as the central processing element in embedded control systems. Key specifications include 512 KB of on-chip Flash organized as 512K x 8 bits, 32 KB SRAM, a 66 MHz maximum CPU clock, 56 I/O pins, and a 388-ball Plastic BGA (PBGA) package. The integrated peripherals typically include a CAN 2.0B controller, queued SPI, queued UART, MI bus interface, and a time processor unit supporting DC motor and brushless DC motor PWM generation. The MPC563 belongs to the CMF (Common Memory Family) architecture with separate instruction and data paths. The MPC563 architecture uses a Harvard-style memory organization with separate CMF_A and CMF_B Flash arrays, allowing concurrent instruction fetch and data operations. The CPU supports hardware multiply and divide, a barrel shifter, and dedicated registers for context switching, enabling responsive real-time control of mechanical systems. Typical applications include automotive engine control units (ECUs), electronic power steering, transmission control modules, body controllers, industrial servo drives, and CAN-connected industrial automation equipment. The combination of automotive qualification, CAN bus support, and integrated motor-control peripherals makes it particularly well-suited for vehicle powertrain and chassis systems. A key design consideration when using the MPC563CZP66 is that it is a mature, legacy part approaching end-of-life status; long-term availability should be verified before committing to new designs. Developers should also consider the 27 x 27 mm BGA package footprint, which requires multi-layer PCB design with controlled-impedance routing and BGA assembly capability. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기