IPN60R2K0PFD7SATMA1 - 600V CoolMOS PFD7 MOSFET | Infineon
MPN: IPN60R2K0PFD7SATMA1 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0.62 | $0.62 |
| 10 | $0.55 | $5.50 |
| 100 | $0.42 | $42.00 |
| 500 | $0.34 | $170.00 |
| 1,000 | $0.28 | $280.00 |
Drop-in alternatives for IPN60R2K0PFD7SATMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
IPN60R2K0PFD7S
✅ Drop-In📋 Reference alternative (not in catalog)
IPN80R4K5P7ATMA1
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$0.3 / Unit
View Datasheet →IPN95R3K7P7ATMA1
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$0.44 / Unit
View Datasheet →IPN60R2K0PFD7SATMA1 Maximum Ratings & Electrical Characteristics
| Manufacturer | Infineon Technologies |
| Product Series | CoolMOS PFD7 |
| Channel Type | N-Channel |
| Drain-Source Voltage (V(BR)DSS) | 600 V |
| Continuous Drain Current (Tc) | 3 A |
| Power Dissipation (Tc) | 6 W |
| RDS(on) typical @ VGS=10V | 2.0 Ohm |
| RDS(on) max @ VGS=10V | 1.626 Ohm (per Infineon product page) |
| Gate-Source Voltage (VGS) max | ±20 V |
| Gate Threshold Voltage (VGS(th)) | 3.8 nC @ 10 V (per UTMel listing) |
| Input Capacitance (Ciss) | 134 pF @ 400 V (per UTMel listing) |
| Technology | CoolMOS superjunction |
| Package | PG-SOT223-3-1 (SOT-223) |
| Mounting Type | Surface Mount |
| RoHS Status | Compliant (per Newark listing) |
IPN60R2K0PFD7SATMA1 Pin Configuration
| Pin 1 | Gate — Gate drive input (VGS) |
| Pin 2 | Drain — Power drain connection (tied to tab) |
| Pin 3 | Source — Source connection |
| Pin Tab | Drain — Center heat-spreader tab, electrically tied to Pin 2 Drain |
Safe Operating Area (estimated based on package limits)
Typical Applications
IPN60R2K0PFD7SATMA1 is suitable for 6 applications: LED Lighting PFC Front-End, Auxiliary and Standby SMPS in White Goods, TV and Monitor Standby Power Supply, E-Bike and Power-Tool Battery Charger, Solid-State Relay Module (SSR), Industrial Auxiliary 24 V SMPS.
LED Lighting PFC Front-End
The IPN60R2K0PFD7SATMA1 fits 600 V CCM/DCM PFC boost stages in consumer LED luminaires rated 25-150 W, where the 3 A continuous drain current at Tc and the 2.0 Ohm typical RDS(on) keep conduction losses low enough to meet ENERGY STAR and EuP standby targets. Its CoolMOS PFD7 superjunction cell reduces body-diode reverse-recovery charge, suppressing the dV/dt-induced ringing that otherwise degrades PFC THD and EMI margins at 100-200 kHz switching frequencies. Compared to planar 600 V parts, the superjunction structure lowers the figure-of-merit (RDS(on) x Qg), letting designers shrink the PFC inductor or relax the heatsink while keeping case temperature below 100 C in a sealed driver housing.
Recommended
Auxiliary and Standby SMPS in White Goods
In refrigerators, washing machines, and induction-cooktop auxiliary rails, the IPN60R2K0PFD7SATMA1 is used as the primary switch in a 5-15 W QR/FFP flyback converter operating from 85-265 VAC. Its 600 V breakdown rating provides ample derating against 4 kV surge transients, while the small SOT-223 footprint enables sub-10 cm3 PCB assemblies that fit inside the appliance chassis. The 2.0 Ohm RDS(on) keeps full-load efficiency above 85% at 5 V/1 A output, and the integrated body diode supports DCM valley switching without an external snubber. Compared to older P6 series CoolMOS, the PFD7 generation reduces switching losses by approximately 30%, enabling 100 kHz operation without exceeding 60 C case temperature.
Recommended
TV and Monitor Standby Power Supply
The IPN60R2K0PFD7SATMA1 is well matched to the 5-10 W standby supply found in modern LED-backlit TVs and monitors, where the ErP standby regulation caps no-load consumption below 75 mW. The 600 V rating accommodates universal mains input and the SOT-223 footprint enables the entire PFC + flyback + standby converter to fit on a single 80x60 mm daughterboard behind the LCD panel. Designers value the 6 W power dissipation rating with a 1 square-inch copper pour, which keeps the junction rise below 50 K during continuous 1.5 A flyback operation - critical for sealed plastic enclosures where convection cooling is limited.
Recommended
E-Bike and Power-Tool Battery Charger
For 36 V / 48 V e-bike and 18 V / 20 V cordless-tool chargers with universal mains input, the IPN60R2K0PFD7SATMA1 serves as the primary switch in a PFC-boost stage followed by a downstream LLC or QR converter. Its 600 V breakdown comfortably handles rectified 230 VAC peaks with margin, and the small SMD package keeps the charger housing under 350 g - a hard requirement for hand-held tool ergonomics. The low reverse-recovery charge (Qrr) of the PFD7 superjunction body diode suppresses CCM PFC cross-conduction, helping achieve >0.95 power factor at full load while staying within EN55022 class B EMI limits.
Recommended
Solid-State Relay Module (SSR)
The IPN60R2K0PFD7SATMA1 can be used as the AC-switch element in PCB-mount solid-state relays for HVAC controls and industrial I/O, where its 600 V blocking voltage covers 230 VAC line peaks and the SOT-223 footprint keeps the SSR module footprint under 20x15 mm. Designers use the device in zero-cross or random-fire topologies with a gate-driver optocoupler; the low input capacitance (134 pF Ciss at 400 V) means the gate drive can be sourced directly from an MOC3021-style opto-isolator without a buffer stage. Compared to a TRIAC-based equivalent, the MOSFET relay eliminates latching and provides cleaner turn-off at the expense of higher conduction loss.
Recommended
Industrial Auxiliary 24 V SMPS
In industrial 24 V auxiliary supplies powered from 115/230 VAC mains, the IPN60R2K0PFD7SATMA1 fills the role of primary-side switch in a 30-50 W CCM flyback, where the 600 V rating provides derating margin against 1.5 kV differential-mode surges. The CoolMOS PFD7 series combines low Qg for reduced driver losses with a robust body diode that tolerates CCM hard-commutation - important when the supply must ride through 20 ms line-drop events without latch-up. Designers pair it with an Infineon EicePAIR ICE2QR0680Z controller, which integrates burst-mode operation for sub-100 mW standby consumption.
Recommended
Recommended Products Summary
Engineering reference data for IPN60R2K0PFD7SATMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | IPN60R2K0PFD7S | IPN80R4K5P7ATMA1 | IPN95R3K7P7ATMA1 | IPD60R380C6ATMA1 |
|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-SOT223-3-1 (SOT-223) | PG-SOT223-3-1 (same) | PG-SOT223-3-1 (same) | PG-SOT223-3-1 (same) | DPAK (TO-252) - different footprint |
| Drain-Source Voltage V(BR)DSS | 600 V | 600 V | 800 V | 950 V | 600 V |
| Continuous Drain Current (Tc) | 3 A | 3 A | 1.5 A | 1 A | 10 A+ |
| RDS(on) typical @ VGS=10V | 2.0 Ohm | 2.0 Ohm | 4.5 Ohm | 3.7 Ohm | 0.38 Ohm |
| Power Dissipation (Tc) | 6 W | 6 W | [DATA_NEEDED] | [DATA_NEEDED] | 42 W |
| Technology | CoolMOS PFD7 superjunction | CoolMOS PFD7 | CoolMOS P7 | CoolMOS P7 | CoolMOS CFD2 |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount (DPAK) |
Key Differentiators
- Compact SOT-223 surface-mount packaging for consumer SMPS (vs IPD60R380C6ATMA1 (DPAK))
- CoolMOS PFD7 low reverse-recovery charge for CCM PFC (vs IPN80R4K5P7ATMA1 (800 V))
- 600 V rating optimized for universal-mains consumer SMPS (vs IPN95R3K7P7ATMA1 (950 V))
Design Notes
The PG-SOT223-3-1 package dissipates 6 W at Tc=25 C, but real-world applications rely on thermal conduction from the central drain tab into the PCB copper. Estimated: with 1 square-inch (645 mm^2) of 2 oz copper pour on both sides connected via thermal vias, the effective theta_JA drops from approximately 150 C/W (minimum pad) to about 70 C/W, allowing continuous 1.5 A at 600 V switching without exceeding a 100 C junction. Increase the pour to 2 square inches for continuous operation above 2 A.
Keep the drain tab copper at least 1.5 mm away from low-voltage signal traces at 230 VAC mains stress - a slot or notch in the PCB under the tab further improves creepage. The gate drive loop (gate resistor - gate-source return) should be kept under 5 mm total length to minimize parasitic inductance and ringing; place the gate drive return via directly at the SOT-223 source pin rather than the tab.
Do not exceed the ±20 V VGS absolute maximum, even briefly during turn-off - overshoot from a high-dV/dt drain transition can punch through the gate oxide on a 600 V part. Always include a gate-source Zener clamp (15 V) or tighten the gate-drive loop inductance. Also avoid operating the body diode in continuous conduction at high dV/dt - the PFD7 diode is optimized for hard-commutation but still has measurable Qrr.
Compliance Information
RoHS compliant per Newark listing. Not AEC-Q100 qualified - consumer/industrial grade only. Conflict-minerals statement per Infineon product family policy.
