XC5VLX20T-1FFG323I - 1V Virtex-5 LXT FPGA | AMD Xilinx
MPN: XC5VLX20T-1FFG323I ✓ ActiveXC5VLX20T-1FFG323I Overview
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and other configurable resources can be programmed after fabrication. An FPGA sits above fixed-function logic and programmable processors in the system hierarchy, combining parallel hardware flexibility with software-defined configuration. Virtex-5 LXT devices are used when designers need substantial logic density, dedicated DSP resources, high-speed serial connectivity, and embedded memory within one programmable package.
The XC5VLX20T family combines 19,968 logic cells with 1,560 logic blocks and an internal operating frequency of 1,098 MHz. Its 65 nm CMOS process supports dense programmable logic, while the 1 V core supply reflects the power requirements of this device generation. The LXT platform is suited to high-throughput signal processing, network infrastructure, industrial control, communications, and embedded systems where parallel datapaths and configurable peripherals provide more flexibility than fixed-function logic.
In a typical design, the FPGA receives parallel or serial data, performs operations in LUT-based logic and dedicated resources, and exchanges results through memory or high-speed I/O. Designers can parallelize operations that would otherwise require multiple fixed-function devices. The 323-pin FCBGA provides a substantial connection count for power, ground, configuration, clock, serial transceiver, and user I/O requirements, making careful ball assignment and power-plane planning essential.
Typical applications include telecom line-card and switching equipment, industrial automation, test-and-measurement instrumentation, high-speed networking, embedded control, and signal-processing modules. In these systems, the XC5VLX20T-1FFG323I can implement multiple parallel pipelines, protocol bridges, buffering stages, or fixed-point arithmetic functions while allowing field updates to the FPGA bitstream.
The primary design trade-off is package complexity. A 19 mm x 19 mm, 323-ball BGA demands fine-pitch assembly, careful via-in-pad and solder-mask design, and reliable thermal and power delivery. Differential clock routing, decoupling, configuration access, JTAG behavior, and high-speed I/O implementation must be reviewed against the manufacturer’s Virtex-5 design guidance before layout release.
This page combines device specifications, same-footprint upgrade options, and practical selection guidance to help engineers distinguish speed-grade and temperature-grade alternatives. It is designed for engineers who need an exact 1 V, 323-pin Virtex-5 LXT selection while accounting for timing, thermal conditions, PCB constraints, and system availability.
Drop-in alternatives for XC5VLX20T-1FFG323I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with XC5VLX20T-1FFG323I (same form factor and footprint) — differing in Package Type.
XC5VLX20T-2FFG323I
✅ Drop-In📋 Reference alternative (not in catalog)
XC5VLX20T-1FFG323C
✅ Drop-InContact for price
View Datasheet →XC5VLX20T-1FF323I
✅ Drop-In📋 Reference alternative (not in catalog)
XC5VLX20T-1FF323C
✅ Drop-In📋 Reference alternative (not in catalog)
XC5VLX20T-2FF323C
✅ Drop-In📋 Reference alternative (not in catalog)
XC5VLX20T-1FFG323I Maximum Ratings & Electrical Characteristics
| Device Type | Virtex-5 LXT Field Programmable Gate Array |
| Logic Cells | 19,968 cells |
| Logic Blocks | 1,560 blocks |
| Internal Frequency | 1,098 MHz |
| Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Package Type | 323-BBGA FCBGA |
| Package Dimensions | 19 mm x 19 mm |
| Pin Count | 323 pins |
| Operating Temperature | 0 °C to 85 °C |
| Mounting Type | Surface Mount |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
| Lead-Free Status | Lead Free |
| Programmable Logic Type | SRAM-configurable CMOS FPGA |
| Product Family | Virtex-5 LXT |
XC5VLX20T-1FFG323I 19 mm x 19 mm Pin Configuration Guide
Pin configuration for XC5VLX20T-1FFG323I (19 mm x 19 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for XC5VLX20T-1FFG323I.
Refer to the datasheet for full pin configuration.
Typical Applications
XC5VLX20T-1FFG323I is suitable for 6 applications: Telecommunications Line-Card Processing, Industrial Automation and Control, High-Speed Signal Processing, Test and Measurement Instrumentation, Embedded Communication Controller, Aerospace Ground Support Equipment.
Telecommunications Line-Card Processing
The XC5VLX20T-1FFG323I is well suited to telecommunications line-card functions because its 19,968 logic cells and 1,560 logic blocks can support parallel framing, classification, filtering, and packet-control pipelines. The -1 speed grade and 1,098 MHz internal frequency provide timing headroom for synchronous logic, while the 323-pin FCBGA exposes substantial I/O for clocks, serial links, and control signals. A Virtex-5 LXT implementation can consolidate multiple fixed-function blocks into one programmable device, while field reconfiguration allows firmware updates. The 1 V core supply also requires a carefully partitioned power tree with low-impedance distribution across the BGA.
Recommended
Industrial Automation and Control
Industrial controllers benefit from the XC5VLX20T-1FFG323I because its configurable logic can execute several machine-control tasks in parallel, including timing, sequencing, motion coordination, and signal conditioning. The industrial 0 °C to 85 °C rating supports operation across controlled factory environments, and the -1 speed grade supports demanding control loops. The 323-ball package provides the pin count needed for digital I/O and differential interfaces, although industrial EMC requirements make controlled-impedance routing and robust ground distribution essential. Programmable logic also allows line-specific changes without redesigning the controller board.
Recommended
High-Speed Signal Processing
The XC5VLX20T-1FFG323I can implement wide parallel signal-processing chains where 19,968 configurable cells provide more implementation flexibility than a small CPLD. Suitable functions include digital filtering, correlation, modulation, FFT support logic, and data-format conversion. Its 1,098 MHz internal operating point helps support pipelined architectures, while the -1 grade gives designers additional timing margin over slower Virtex-5 LXT options. The 323-pin FCBGA supplies the necessary high-speed clock and data connections, but signal integrity depends on exact package assignments, reference clock quality, and short return paths.
Recommended
Test and Measurement Instrumentation
Programmable test equipment can use the XC5VLX20T-1FFG323I to combine acquisition control, pattern generation, timing logic, and data processing in a single FPGA. The device’s 19,968 logic cells allow multiple measurement channels or substantial test vectors to be processed concurrently, while the -1 speed grade supports high-rate digital pipelines. The industrial-temperature range is appropriate for laboratory and production-test environments. Because instruments often require precise clocks and low-noise analog interfaces, the FPGA should be paired with clean reference sources, separate analog supplies, and carefully isolated clock and I/O power domains.
Recommended
Embedded Communication Controller
The XC5VLX20T-1FFG323I is suitable for embedded communication controllers that must combine protocol termination, buffering, routing, and host-interface logic. Its programmable resources allow multiple interfaces and data paths to be consolidated without relying on a fixed pin map, while the 323-pin package provides sufficient connections for parallel buses and high-speed serial links. The -1 grade can improve timing margin in demanding round-trip paths. Designers should use the official configuration and pin tables to preserve JTAG, DONE, and programming access, and should verify tool support and bitstream compatibility before committing the device to a long-life embedded platform.
Recommended
Aerospace Ground Support Equipment
The XC5VLX20T-1FFG323I can be evaluated for aerospace ground-support and simulation systems that need flexible logic, broad I/O connectivity, and reconfigurable hardware. Parallel simulation engines, telemetry handlers, and test-pattern generators can share the device’s 19,968 logic cells, while the 323-ball package simplifies connections to external converters, memory, and clocking components. The industrial temperature rating must be checked against the actual ground-equipment environment and required reliability program. Flight hardware generally requires separate qualification and may impose additional radiation, traceability, or screening requirements that cannot be inferred from the commercial device designation alone.
Recommended
Recommended Products Summary
Engineering reference data for XC5VLX20T-1FFG323I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | XC5VLX20T-2FFG323I | XC5VLX20T-1FFG323C | XC5VLX20T-1FF323I | XC5VLX20T-1FF323C | XC5VLX20T-2FF323C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 323-BBGA FCBGA, 19 mm x 19 mm | 323-BBGA FCBGA | 323-BBGA FCBGA | FBGA-323, 19 mm x 19 mm | FBGA-323, 19 mm x 19 mm | FBGA-323, 19 mm x 19 mm |
| Logic Cells | 19,968 cells | 19,968 cells | 19,968 cells | 19,968 cells | 19,968 cells | 19,968 cells |
| Logic Blocks | 1,560 blocks | 1,560 blocks | 1,560 blocks | 1,560 blocks | 1,560 blocks | 1,560 blocks |
| Internal Frequency | 1,098 MHz | 1,098 MHz | 1,098 MHz | 1,098 MHz | 1,098 MHz | 1,098 MHz |
| Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -1 | -2 | -1 | -1 | -1 | -2 |
| Operating Temperature | 0 °C to 85 °C | 0 °C to 85 °C | Commercial temperature grade | 0 °C to 85 °C | Commercial temperature grade | Commercial temperature grade |
Key Differentiators
- Faster -1 speed grade (vs XC5VLX20T-2FFG323I)
- Industrial temperature coverage (vs XC5VLX20T-1FFG323C)
- Retains FFG323 package configuration (vs XC5VLX20T-1FF323I)
Design Notes
The XC5VLX20T-1FFG323I uses a 323-ball FCBGA footprint, so the PCB stack-up, solder-mask definition, paste stencil, and ball-pitch-compatible land pattern must be taken from the official package drawing. Preserve access to configuration, JTAG, clock, and test pins. Place local decoupling at the device power balls rather than relying on distant bulk capacitance, and provide uninterrupted reference planes beneath the BGA to limit inductance and improve high-speed return paths.
Separate and regulate the 1 V core supply according to the manufacturer’s power-supply recommendations, while accounting for separately powered I/O groups if assigned to other rails. Estimate worst-case core and I/O current from the selected design rather than assuming that an idle FPGA consumes little power. Validate startup sequencing, voltage ramp limits, and the tolerance between the core and I/O rails before releasing the board to production.
Estimated: if the FPGA dissipates 2 W and the assembled-board thermal resistance from the device junction to ambient is 20 °C/W, the junction-temperature rise is approximately 40 °C. The actual result depends on airflow, copper area, board construction, neighboring heat sources, and the package thermal model. Use the manufacturer’s thermal data and a board-level thermal analysis for the final junction-temperature limit, especially in sealed or densely populated systems.
Assign clocks and high-speed interfaces through the official pin tables, maintain continuous reference planes, and observe the device’s stated input, output, and slew-rate constraints. Differential pairs should use length matching appropriate to the implemented interface rather than a generic rule. Add source-series termination where required by the interface specification, and keep configuration pins away from aggressive high-speed return paths to prevent startup or operation errors.
Compliance Information
The device is identified as lead free in the technical listing. RoHS, REACH, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is not applicable to this industrial-temperature FPGA designation.