MPXC2012DT1 vs MPXC2011DT1 Karşılaştırma

Ayrıntılı yan yana karşılaştırma MPXC2012DT1 tarafından NXP Semiconductors ve MPXC2011DT1 tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

NXP Semiconductors
MPXC2011DT1 MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP

MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP

MPXC2011DT1 ✓ Aktif

Özellik Karşılaştırması

Parametre MPXC2012DT1 MPXC2011DT1
Marka NXP Semiconductors NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Yaşam Döngüsü Durumu NRND Aktif
Pressure Type Differential Differential
Operating Pressure 1.45 PSI (10 kPa) —
Maximum Over Pressure [DATA_NEEDED: maximum overpressure rating] —
Çıkış Türü Wheatstone Bridge (analog mV) Analog Wheatstone bridge (ratiometric)
Full-Scale Output 24 mV to 26 mV (typ. 25 mV) at 10 V excitation 25 mV typical at 10 V excitation
Offset (Null) 0 mV nominal at 10 V excitation —
Excitation Voltage 10 V DC typical 3 V DC to 10 V DC (10 V nominal)
Bridge Resistance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity %FS] —
Pressure Port Size Female, 0.128 in (3.25 mm) side port —
Port Style Side port, single barbed inlet Female, 3.25 mm (0.128 in) barbed side port
Paket / Kas 4-SSIP Module (chip-pak, no gel) —
Termination Style Through-hole PCB (vertical mount) Through-hole PCB, 4 leads
Gel Protection No (bare die in chip-pak cavity) —
İşletim Sıcaklığı [DATA_NEEDED: operating temperature range] 0 °C to +85 °C
Storage Temperature [DATA_NEEDED: storage temperature range] —
Montaj Türü Through-hole, vertical Through-hole (PCB mount with side-port tubing)
RoHS Durumu [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status not in web data]
MSL Seviyesi Not applicable (through-hole sensor module) —
Manufacturer NXP Semiconductors (formerly Freescale / Motorola) —
Operating Pressure Range — 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Sensitivity — 2.5 mV/kPa typical
Paket — 4-SSIP Chip Pak module, side port
Compensation — On-chip temperature compensated and calibrated
Technology — Piezoresistive silicon strain gauge
Module Dimensions — 7.6 mm x 12.8 mm nominal

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin