A3P600-1FGG144 - 600K Gate ProASIC3 FPGA | Microchip
MPN: A3P600-1FGG144 ✓ Hoạt độngA3P600-1FGG144 Tóm tắt
A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing, using hardware description languages like VHDL or Verilog. FPGAs sit between fixed-function ASICs and general-purpose processors, offering reconfigurable logic, parallel processing, and deterministic timing. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash cells, providing instant-on operation, low power, and security without external boot memory.
Key features of the A3P600-1FGG144 include 110,592 bits of embedded RAM, 97 I/O pins with support for multiple I/O standards, and four I/O banks with dedicated VCCIBx supplies. The flash-based architecture eliminates the need for configuration PROMs, reduces system cost, and provides design security against cloning. The device also offers low power consumption, with a typical static power of and dynamic power scaling with frequency.
Technically, the A3P600 uses a 130nm flash process, enabling non-volatile configuration that retains the design even when power is removed. The FPGA includes PLLs, clock conditioning circuitry, and up to 1 Mbit of user flash memory (UFM) for data storage. The 144-ball FBGA package measures 13x13mm with a 1.00mm ball pitch, suitable for compact PCB layouts with moderate I/O density.
Typical applications include industrial control, automotive electronics, communications infrastructure, and medical devices where mid-density logic, low power, and secure configuration are required. The 97 I/Os support LVCMOS, LVTTL, PCI, and other standards, enabling direct interface to sensors, ADCs, and communication transceivers.
When designing with this device, ensure proper decoupling of the 1.5V core supply and each VCCIBx bank supply. The flash-based architecture allows secure remote updates, but careful attention to I/O bank voltage assignments is required to avoid damage. The device supports in-system programming (ISP) via JTAG, simplifying field updates.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a complete sourcing and design reference for the A3P600-1FGG144.
Bộ thay thế dễ dàng lắp đặt cho A3P600-1FGG144 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3P600-1FGG144 (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Technology, RoHS Status, Configuration.
A3P600-1FGG144I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-FGG144
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-FGG144I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600L-1FGG144I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600L-FGG144I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600L-FGG144
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3P600-1FGG144 Tỷ lệ tối đa & tính chất điện
| Family | ProASIC3 |
| Total Gates | 600,000 |
| Logic Elements (CLBs) | 13,824 |
| Number of I/Os | 97 |
| Embedded RAM | 110,592 bits |
| Core Supply Voltage | 1.5 V |
| Maximum System Performance | 350 MHz |
| Hộp | 144-LBGA (FBGA) |
| Package Pitch | 1.00 mm |
| Kiểu lắp đặt | SMD/SMT |
| Khoảng nhiệt độ hoạt động | 0 C to +70 C |
| Packaging | Tray |
| I/O Banks | 4 |
| Configuration | Flash-based (non-volatile) |
| Trạng thái RoHS | Compliant |
Cấu hình chân A3P600-1FGG144
| Chân A1 | IO — User I/O (Bank 0) |
| Chân A2 | IO — User I/O (Bank 0) |
| Chân A3 | VCCIB0 — I/O supply for Bank 0 |
| Chân A4 | IO — User I/O (Bank 0) |
| Chân A5 | IO — User I/O (Bank 0) |
| Chân A6 | GND — Ground |
| Chân A7 | IO — User I/O (Bank 1) |
| Chân A8 | IO — User I/O (Bank 1) |
| Chân A9 | VCCIB1 — I/O supply for Bank 1 |
| Chân A10 | IO — User I/O (Bank 1) |
| Chân A11 | IO — User I/O (Bank 1) |
| Chân A12 | IO — User I/O (Bank 1) |
| Chân B1 | IO — User I/O (Bank 0) |
| Chân B2 | IO — User I/O (Bank 0) |
| Chân B3 | IO — User I/O (Bank 0) |
| Chân B4 | IO — User I/O (Bank 0) |
| Chân B5 | VCC — Core supply 1.5V |
| Chân B6 | GND — Ground |
| Chân B7 | IO — User I/O (Bank 1) |
| Chân B8 | IO — User I/O (Bank 1) |
| Chân B9 | IO — User I/O (Bank 1) |
| Chân B10 | IO — User I/O (Bank 1) |
| Chân B11 | IO — User I/O (Bank 1) |
| Chân B12 | IO — User I/O (Bank 1) |
| Chân C1 | IO — User I/O (Bank 0) |
| Chân C2 | IO — User I/O (Bank 0) |
| Chân C3 | IO — User I/O (Bank 0) |
| Chân C4 | IO — User I/O (Bank 0) |
| Chân C5 | VCC — Core supply 1.5V |
| Chân C6 | GND — Ground |
| Chân C7 | IO — User I/O (Bank 1) |
| Chân C8 | IO — User I/O (Bank 1) |
| Chân C9 | IO — User I/O (Bank 1) |
| Chân C10 | IO — User I/O (Bank 1) |
| Chân C11 | IO — User I/O (Bank 1) |
| Chân C12 | IO — User I/O (Bank 1) |
| Chân D1 | IO — User I/O (Bank 0) |
| Chân D2 | IO — User I/O (Bank 0) |
| Chân D3 | IO — User I/O (Bank 0) |
| Chân D4 | IO — User I/O (Bank 0) |
| Chân D5 | VCC — Core supply 1.5V |
| Chân D6 | GND — Ground |
| Chân D7 | IO — User I/O (Bank 1) |
| Chân D8 | IO — User I/O (Bank 1) |
| Chân D9 | IO — User I/O (Bank 1) |
| Chân D10 | IO — User I/O (Bank 1) |
| Chân D11 | IO — User I/O (Bank 1) |
| Chân D12 | IO — User I/O (Bank 1) |
| Chân E1 | IO — User I/O (Bank 0) |
| Chân E2 | IO — User I/O (Bank 0) |
| Chân E3 | IO — User I/O (Bank 0) |
| Chân E4 | IO — User I/O (Bank 0) |
| Chân E5 | VCC — Core supply 1.5V |
| Chân E6 | GND — Ground |
| Chân E7 | IO — User I/O (Bank 1) |
| Chân E8 | IO — User I/O (Bank 1) |
| Chân E9 | IO — User I/O (Bank 1) |
| Chân E10 | IO — User I/O (Bank 1) |
| Chân E11 | IO — User I/O (Bank 1) |
| Chân E12 | IO — User I/O (Bank 1) |
| Chân F1 | IO — User I/O (Bank 0) |
| Chân F2 | IO — User I/O (Bank 0) |
| Chân F3 | IO — User I/O (Bank 0) |
| Chân F4 | IO — User I/O (Bank 0) |
| Chân F5 | VCC — Core supply 1.5V |
| Chân F6 | GND — Ground |
| Chân F7 | IO — User I/O (Bank 1) |
| Chân F8 | IO — User I/O (Bank 1) |
| Chân F9 | IO — User I/O (Bank 1) |
| Chân F10 | IO — User I/O (Bank 1) |
| Chân F11 | IO — User I/O (Bank 1) |
| Chân F12 | IO — User I/O (Bank 1) |
| Chân G1 | IO — User I/O (Bank 0) |
| Chân G2 | IO — User I/O (Bank 0) |
| Chân G3 | IO — User I/O (Bank 0) |
| Chân G4 | IO — User I/O (Bank 0) |
| Chân G5 | VCC — Core supply 1.5V |
| Chân G6 | GND — Ground |
| Chân G7 | IO — User I/O (Bank 1) |
| Chân G8 | IO — User I/O (Bank 1) |
| Chân G9 | IO — User I/O (Bank 1) |
| Chân G10 | IO — User I/O (Bank 1) |
| Chân G11 | IO — User I/O (Bank 1) |
| Chân G12 | IO — User I/O (Bank 1) |
| Chân H1 | IO — User I/O (Bank 2) |
| Chân H2 | IO — User I/O (Bank 2) |
| Chân H3 | IO — User I/O (Bank 2) |
| Chân H4 | IO — User I/O (Bank 2) |
| Chân H5 | VCC — Core supply 1.5V |
| Chân H6 | GND — Ground |
| Chân H7 | IO — User I/O (Bank 3) |
| Chân H8 | IO — User I/O (Bank 3) |
| Chân H9 | IO — User I/O (Bank 3) |
| Chân H10 | IO — User I/O (Bank 3) |
| Chân H11 | IO — User I/O (Bank 3) |
| Chân H12 | IO — User I/O (Bank 3) |
| Chân J1 | IO — User I/O (Bank 2) |
| Chân J2 | IO — User I/O (Bank 2) |
| Chân J3 | IO — User I/O (Bank 2) |
| Chân J4 | IO — User I/O (Bank 2) |
| Chân J5 | VCC — Core supply 1.5V |
| Chân J6 | GND — Ground |
| Chân J7 | IO — User I/O (Bank 3) |
| Chân J8 | IO — User I/O (Bank 3) |
| Chân J9 | IO — User I/O (Bank 3) |
| Chân J10 | IO — User I/O (Bank 3) |
| Chân J11 | IO — User I/O (Bank 3) |
| Chân J12 | IO — User I/O (Bank 3) |
| Chân K1 | IO — User I/O (Bank 2) |
| Chân K2 | IO — User I/O (Bank 2) |
| Chân K3 | IO — User I/O (Bank 2) |
| Chân K4 | IO — User I/O (Bank 2) |
| Chân K5 | VCC — Core supply 1.5V |
| Chân K6 | GND — Ground |
| Chân K7 | IO — User I/O (Bank 3) |
| Chân K8 | IO — User I/O (Bank 3) |
| Chân K9 | IO — User I/O (Bank 3) |
| Chân K10 | IO — User I/O (Bank 3) |
| Chân K11 | IO — User I/O (Bank 3) |
| Chân K12 | IO — User I/O (Bank 3) |
| Chân L1 | IO — User I/O (Bank 2) |
| Chân L2 | IO — User I/O (Bank 2) |
| Chân L3 | IO — User I/O (Bank 2) |
| Chân L4 | IO — User I/O (Bank 2) |
| Chân L5 | VCC — Core supply 1.5V |
| Chân L6 | GND — Ground |
| Chân L7 | IO — User I/O (Bank 3) |
| Chân L8 | IO — User I/O (Bank 3) |
| Chân L9 | IO — User I/O (Bank 3) |
| Chân L10 | IO — User I/O (Bank 3) |
| Chân L11 | IO — User I/O (Bank 3) |
| Chân L12 | IO — User I/O (Bank 3) |
| Chân M1 | IO — User I/O (Bank 2) |
| Chân M2 | IO — User I/O (Bank 2) |
| Chân M3 | VCCIB2 — I/O supply for Bank 2 |
| Chân M4 | IO — User I/O (Bank 2) |
| Chân M5 | IO — User I/O (Bank 2) |
| Chân M6 | GND — Ground |
| Chân M7 | IO — User I/O (Bank 3) |
| Chân M8 | IO — User I/O (Bank 3) |
| Chân M9 | VCCIB3 — I/O supply for Bank 3 |
| Chân M10 | IO — User I/O (Bank 3) |
| Chân M11 | IO — User I/O (Bank 3) |
| Chân M12 | IO — User I/O (Bank 3) |
| Chân N1 | IO — User I/O (Bank 2) |
| Chân N2 | IO — User I/O (Bank 2) |
| Chân N3 | IO — User I/O (Bank 2) |
| Chân N4 | IO — User I/O (Bank 2) |
| Chân N5 | IO — User I/O (Bank 2) |
| Chân N6 | GND — Ground |
| Chân N7 | IO — User I/O (Bank 3) |
| Chân N8 | IO — User I/O (Bank 3) |
| Chân N9 | IO — User I/O (Bank 3) |
| Chân N10 | IO — User I/O (Bank 3) |
| Chân N11 | IO — User I/O (Bank 3) |
| Chân N12 | IO — User I/O (Bank 3) |
Ứng dụng tiêu biểu
A3P600-1FGG144 phù hợp cho 6 Áp dụngs: Industrial Control Systems, Automotive Electronics, Communications Infrastructure, Medical Devices, Aerospace and Defense, IoT and Edge Computing.
Industrial Control Systems
The A3P600-1FGG144 is ideal for industrial control systems requiring mid-density logic integration, such as motor control, PLCs, and factory automation. Its 97 I/Os support direct interface to sensors, encoders, and communication transceivers (RS-485, CAN). The flash-based configuration provides instant-on operation, eliminating boot time in safety-critical applications. With 110,592 bits of embedded RAM, it can buffer data for real-time processing. The 1.5V core supply reduces power consumption in 24/7 industrial environments. The 144-FBGA package fits compact control boards, and the 0C to +70C temperature range suits typical factory floor conditions. The device's security features protect IP from cloning, a key requirement in industrial equipment.
Được đề xuất
Automotive Electronics
In automotive applications, the A3P600-1FGG144 is used for body control modules, gateway controllers, and infotainment systems. Its 97 I/Os interface with LIN, CAN, and FlexRay transceivers, while the flash-based configuration ensures secure, instant-on operation. The 1.5V core supply and low power consumption are suitable for always-on automotive modules. However, the standard version's 0C to +70C range limits it to cabin applications; for under-hood use, the A3P600-1FGG144I (-40C to +100C) is required. The device's 110,592 bits of RAM support data logging and protocol buffering. The 144-FBGA package withstands automotive vibration when properly soldered. Designers must ensure I/O bank voltages match the connected transceivers.
Được đề xuất
Communications Infrastructure
The A3P600-1FGG144 excels in communications infrastructure such as small-cell base stations, network switches, and protocol converters. Its 97 I/Os support LVCMOS, LVTTL, and PCI standards, enabling direct connection to PHYs, MACs, and optical modules. The 350 MHz system performance handles high-speed packet processing, while 110,592 bits of RAM buffer data streams. The flash-based configuration allows secure field updates via JTAG, essential for remote network equipment. The 1.5V core supply reduces power in densely populated racks. The 144-FBGA package is ideal for line cards with limited space. Designers should use the PLLs for clock conditioning to meet jitter requirements. The device's low TCO makes it attractive for cost-sensitive infrastructure.
Được đề xuất
Medical Devices
In medical devices like patient monitors, infusion pumps, and diagnostic equipment, the A3P600-1FGG144 provides reliable, secure logic integration. Its 97 I/Os interface with sensors, ADCs, and display controllers. The flash-based configuration ensures deterministic startup, critical for patient safety. The 1.5V core supply and low power consumption extend battery life in portable devices. The 110,592 bits of RAM support data logging and waveform buffering. The 0C to +70C range suits clinical environments. The device's security features protect firmware from tampering, meeting regulatory requirements. The 144-FBGA package enables compact, lightweight designs. Designers must follow medical EMC guidelines for PCB layout, and the device's low EMI helps pass compliance testing.
Được đề xuất
Aerospace and Defense
The A3P600-1FGG144 is used in aerospace and defense applications such as avionics, UAVs, and secure communication systems. Its flash-based configuration provides inherent security against reverse engineering, a critical requirement for defense IP. The 97 I/Os support MIL-STD-1553, ARINC 429, and other avionics buses. The 350 MHz performance handles real-time signal processing. The 1.5V core supply reduces power in space-constrained platforms. The 144-FBGA package is radiation-tolerant for low-earth orbit applications (with additional shielding). The device's instant-on capability is essential for safety-critical systems. For extreme environments, the A3P600-1FGG144I (-40C to +100C) is recommended. Designers must use radiation-hardened variants for high-radiation missions.
Được đề xuất
IoT and Edge Computing
For IoT gateways and edge computing nodes, the A3P600-1FGG144 offers a balance of logic density and low power. Its 97 I/Os connect to various sensors, wireless modules, and local interfaces. The flash-based configuration enables secure over-the-air updates, crucial for IoT security. The 1.5V core supply and low static power extend battery life in remote sensors. The 110,592 bits of RAM buffer data before transmission. The 144-FBGA package fits compact IoT devices. The 0C to +70C range suits indoor gateways; outdoor nodes require the 'I' variant. The device's instant-on capability reduces latency in edge processing. Designers can implement custom protocols in the FPGA fabric, offloading the main processor. The low TCO makes it viable for mass-deployed IoT.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3P600-1FGG144 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3P600-1FGG144I | A3P600-FGG144 | A3P600-FGG144I | A3P600L-1FGG144I | A3P600L-FGG144I | A3P600L-FGG144 |
|---|---|---|---|---|---|---|---|
| Package | 144-LBGA (FBGA) | 144-LBGA (FBGA) - same | 144-LBGA (FBGA) - same | 144-LBGA (FBGA) - same | 144-LBGA (FBGA) - same | 144-LBGA (FBGA) - same | 144-LBGA (FBGA) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Total Gates | 600,000 | 600,000 | 600,000 | 600,000 | 600,000 | 600,000 | 600,000 |
| Number of I/Os | 97 | 97 | 97 | 97 | 97 | 97 | 97 |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Operating Temperature Range | 0 C to +70 C | -40 C to +100 C | 0 C to +70 C | -40 C to +100 C | -40 C to +100 C | -40 C to +100 C | 0 C to +70 C |
| Low-Power Variant | No | No | No | No | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Flash-based non-volatile configuration (vsSRAM-based FPGAs (e.g., Xilinx Spartan-6))
- Single-chip solution with low TCO (vsA3P600-1FGG256)
- Wide operating temperature range option (vsA3P600-1FGG144 (standard))
Ghi chú thiết kế
The A3P600-1FGG144 requires a 1.5V core supply and separate I/O supplies (VCCIBx) for each of the four I/O banks. Decouple each supply pin with a 0.1uF ceramic capacitor placed as close to the ball as possible, plus a 10uF bulk capacitor per bank. The core supply should be clean and stable; use a low-dropout regulator or switching regulator with low ripple. Estimated: total power dissipation depends on logic utilization and I/O toggling; for a typical design with 50% logic utilization and 50 MHz clock, power is approximately 0.5W, requiring adequate copper pour for heat dissipation.
The 144-ball FBGA package with 1.00mm pitch requires careful PCB layout. Use a 4-layer or more stack-up with dedicated power and ground planes. Route I/O signals with controlled impedance (50 ohm) for high-speed interfaces. Ensure the thermal pad (if present) is connected to ground with thermal vias for heat dissipation. Follow Microchip's layout guidelines for the ProASIC3 family, which recommend placing decoupling capacitors on the bottom side directly under the FPGA. Avoid routing high-speed signals near the JTAG pins to prevent noise coupling.
A common mistake is assigning I/Os with incompatible voltage standards to the same bank. Each bank has a dedicated VCCIBx supply, so all I/Os in a bank must use the same voltage level. For example, if Bank 0 is set to 3.3V, all I/Os in Bank 0 must be 3.3V-compatible. Mixing 2.5V and 3.3V I/Os in the same bank will damage the device. Also, ensure the core supply (1.5V) is within the specified tolerance (typically +/-5%). The flash-based configuration is non-volatile, but in-system programming via JTAG requires proper pull-up resistors on TMS and TDI.
Thông tin tuân thủ
RoHS compliant per distributor listings. AEC-Q100 not applicable for this commercial-grade FPGA. REACH and conflict minerals status not specified in the provided data.
