MPX10DP vs MPXC2011DT1 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MPX10DP بواسطة STMicroelectronics و MPXC2011DT1 بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ نشطمقارنة المواصفات
| المعامل | MPX10DP | MPXC2011DT1 |
|---|---|---|
| العلامة التجارية | STMicroelectronics | NXP Semiconductors |
| الفئة | Pressure Sensors | Pressure Sensors |
| حالة دورة الحياة | نشط | نشط |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| نوع الخرج | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone bridge (ratiometric) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| العلبة / الحالة | 4-SIP Module | — |
| نوع التركيب | Through-Hole | Through-hole (PCB mount with side-port tubing) |
| درجة حرارة التشغيل | [DATA_NEEDED: operating temperature range] | 0 °C to +85 °C |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status not in web data] |
| Media Compatibility | Dry gases (non-corrosive) | — |
| Full-Scale Output | — | 25 mV typical at 10 V excitation |
| Sensitivity | — | 2.5 mV/kPa typical |
| Excitation Voltage | — | 3 V DC to 10 V DC (10 V nominal) |
| العلبة | — | 4-SSIP Chip Pak module, side port |
| Port Style | — | Female, 3.25 mm (0.128 in) barbed side port |
| Termination Style | — | Through-hole PCB, 4 leads |
| Compensation | — | On-chip temperature compensated and calibrated |
| Technology | — | Piezoresistive silicon strain gauge |
| Module Dimensions | — | 7.6 mm x 12.8 mm nominal |