MPX10DP vs MPXC2011DT1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MPX10DP sa pamamagitan ng STMicroelectronics at MPXC2011DT1 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ NakahandaNXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MPX10DP | MPXC2011DT1 |
|---|---|---|
| Brand | STMicroelectronics | NXP Semiconductors |
| Kategorya | Pressure Sensors | Pressure Sensors |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Type ng Output | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone bridge (ratiometric) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Packhaging / Kaso | 4-SIP Module | — |
| Uri ng Pagpapasok | Through-Hole | Through-hole (PCB mount with side-port tubing) |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | 0 °C to +85 °C |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status not in web data] |
| Media Compatibility | Dry gases (non-corrosive) | — |
| Full-Scale Output | — | 25 mV typical at 10 V excitation |
| Sensitivity | — | 2.5 mV/kPa typical |
| Excitation Voltage | — | 3 V DC to 10 V DC (10 V nominal) |
| Packhaging | — | 4-SSIP Chip Pak module, side port |
| Port Style | — | Female, 3.25 mm (0.128 in) barbed side port |
| Termination Style | — | Through-hole PCB, 4 leads |
| Compensation | — | On-chip temperature compensated and calibrated |
| Technology | — | Piezoresistive silicon strain gauge |
| Module Dimensions | — | 7.6 mm x 12.8 mm nominal |