MPX10DP vs MPXC2011DT1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPX10DP tarafından STMicroelectronics ve MPXC2011DT1 tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ AktifNXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ AktifÖzellik Karşılaştırması
| Parametre | MPX10DP | MPXC2011DT1 |
|---|---|---|
| Marka | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Çıkış Türü | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone bridge (ratiometric) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Paket / Kas | 4-SIP Module | — |
| Montaj Türü | Through-Hole | Through-hole (PCB mount with side-port tubing) |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | 0 °C to +85 °C |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status not in web data] |
| Media Compatibility | Dry gases (non-corrosive) | — |
| Full-Scale Output | — | 25 mV typical at 10 V excitation |
| Sensitivity | — | 2.5 mV/kPa typical |
| Excitation Voltage | — | 3 V DC to 10 V DC (10 V nominal) |
| Paket | — | 4-SSIP Chip Pak module, side port |
| Port Style | — | Female, 3.25 mm (0.128 in) barbed side port |
| Termination Style | — | Through-hole PCB, 4 leads |
| Compensation | — | On-chip temperature compensated and calibrated |
| Technology | — | Piezoresistive silicon strain gauge |
| Module Dimensions | — | 7.6 mm x 12.8 mm nominal |