MPX10DP vs MPXC2011DT1 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPX10DP disebabkan oleh STMicroelectronics dan MPXC2011DT1 disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ AktifNXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ AktifPengandingan Spesifikasi
| Parametr | MPX10DP | MPXC2011DT1 |
|---|---|---|
| Merek | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Differential | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Jenis Output | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone bridge (ratiometric) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Kemasan / Case | 4-SIP Module | — |
| Jenis Pemasangan | Through-Hole | Through-hole (PCB mount with side-port tubing) |
| Suhu Operasi | [DATA_NEEDED: operating temperature range] | 0 °C to +85 °C |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status not in web data] |
| Media Compatibility | Dry gases (non-corrosive) | — |
| Full-Scale Output | — | 25 mV typical at 10 V excitation |
| Sensitivity | — | 2.5 mV/kPa typical |
| Excitation Voltage | — | 3 V DC to 10 V DC (10 V nominal) |
| Kemasan | — | 4-SSIP Chip Pak module, side port |
| Port Style | — | Female, 3.25 mm (0.128 in) barbed side port |
| Termination Style | — | Through-hole PCB, 4 leads |
| Compensation | — | On-chip temperature compensated and calibrated |
| Technology | — | Piezoresistive silicon strain gauge |
| Module Dimensions | — | 7.6 mm x 12.8 mm nominal |