STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
MPN: STM32F413ZHT3 ✓ نشطSTM32F413ZHT3 نظرة عامة
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
بدائل مباشرة لـ STM32F413ZHT3 — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع STM32F413ZHT3 (نفس عامل الشكل والبصمة) — يختلف في ADC, Communication Interfaces, Core, Package, SRAM.
STM32F413ZHJ6
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F423ZHT6
✅ بديل مباشر📋 بديل مرجعي (غير موجود في الكتالوج)
STM32F407VGT6
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←STM32F413ZHT3 الحدود القصوى والخصائص الكهربائية
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| العلبة | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| درجة حرارة التشغيل | -40C to +125C (industrial grade) |
| حالة RoHS | Compliant |
تكوين أطراف STM32F413ZHT3
| دبوس 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| دبوس 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| دبوس 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| دبوس 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| دبوس 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| دبوس 6 | VBAT — Battery backup power supply |
| دبوس 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| دبوس 8 | PC14 — GPIO PC14 / OSC32_IN |
| دبوس 9 | PC15 — GPIO PC15 / OSC32_OUT |
| دبوس 10 | VSS — Ground |
| دبوس 11 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 12 | OSC_IN — HSE oscillator input |
| دبوس 13 | OSC_OUT — HSE oscillator output |
| دبوس 14 | NRST — Reset input, active low |
| دبوس 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| دبوس 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| دبوس 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| دبوس 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| دبوس 19 | VREF+ — ADC positive reference voltage |
| دبوس 20 | VDDA — Analog power supply |
| دبوس 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| دبوس 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| دبوس 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| دبوس 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| دبوس 25 | VSS — Ground |
| دبوس 26 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| دبوس 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| دبوس 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| دبوس 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| دبوس 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| دبوس 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| دبوس 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| دبوس 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| دبوس 35 | PB2 — GPIO PB2 / BOOT1 |
| دبوس 36 | PE7 — GPIO PE7 / FSMC_D4 |
| دبوس 37 | PE8 — GPIO PE8 / FSMC_D5 |
| دبوس 38 | PE9 — GPIO PE9 / FSMC_D6 |
| دبوس 39 | PE10 — GPIO PE10 / FSMC_D7 |
| دبوس 40 | PE11 — GPIO PE11 / FSMC_D8 |
| دبوس 41 | PE12 — GPIO PE12 / FSMC_D9 |
| دبوس 42 | PE13 — GPIO PE13 / FSMC_D10 |
| دبوس 43 | PE14 — GPIO PE14 / FSMC_D11 |
| دبوس 44 | PE15 — GPIO PE15 / FSMC_D12 |
| دبوس 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| دبوس 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| دبوس 47 | VSS — Ground |
| دبوس 48 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| دبوس 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| دبوس 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| دبوس 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| دبوس 53 | PD8 — GPIO PD8 / FSMC_D13 |
| دبوس 54 | PD9 — GPIO PD9 / FSMC_D14 |
| دبوس 55 | PD10 — GPIO PD10 / FSMC_D15 |
| دبوس 56 | PD11 — GPIO PD11 / FSMC_A16 |
| دبوس 57 | PD12 — GPIO PD12 / FSMC_A17 |
| دبوس 58 | PD13 — GPIO PD13 / FSMC_A18 |
| دبوس 59 | PD14 — GPIO PD14 / FSMC_D0 |
| دبوس 60 | PD15 — GPIO PD15 / FSMC_D1 |
| دبوس 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| دبوس 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| دبوس 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| دبوس 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| دبوس 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| دبوس 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| دبوس 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| دبوس 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| دبوس 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| دبوس 70 | PA13 — GPIO PA13 / SWDIO |
| دبوس 71 | VSS — Ground |
| دبوس 72 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 73 | PA14 — GPIO PA14 / SWCLK |
| دبوس 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| دبوس 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| دبوس 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| دبوس 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| دبوس 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| دبوس 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| دبوس 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| دبوس 81 | PD3 — GPIO PD3 / FSMC_CLK |
| دبوس 82 | PD4 — GPIO PD4 / FSMC_NOE |
| دبوس 83 | PD5 — GPIO PD5 / FSMC_NWE |
| دبوس 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| دبوس 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| دبوس 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| دبوس 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| دبوس 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| دبوس 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| دبوس 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| دبوس 91 | BOOT0 — Boot mode select |
| دبوس 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| دبوس 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| دبوس 94 | PE0 — GPIO PE0 / TIM4_ETR |
| دبوس 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| دبوس 96 | VSS — Ground |
| دبوس 97 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 98 | PF0 — GPIO PF0 / FSMC_A0 |
| دبوس 99 | PF1 — GPIO PF1 / FSMC_A1 |
| دبوس 100 | PF2 — GPIO PF2 / FSMC_A2 |
| دبوس 101 | PF3 — GPIO PF3 / FSMC_A3 |
| دبوس 102 | PF4 — GPIO PF4 / FSMC_A4 |
| دبوس 103 | PF5 — GPIO PF5 / FSMC_A5 |
| دبوس 104 | VSS — Ground |
| دبوس 105 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| دبوس 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| دبوس 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| دبوس 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| دبوس 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| دبوس 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| دبوس 112 | PF12 — GPIO PF12 / FSMC_A6 |
| دبوس 113 | PF13 — GPIO PF13 / FSMC_A7 |
| دبوس 114 | PF14 — GPIO PF14 / FSMC_A8 |
| دبوس 115 | PF15 — GPIO PF15 / FSMC_A9 |
| دبوس 116 | PG0 — GPIO PG0 / FSMC_A10 |
| دبوس 117 | PG1 — GPIO PG1 / FSMC_A11 |
| دبوس 118 | PE2 — GPIO PE2 / FSMC_A23 |
| دبوس 119 | PE3 — GPIO PE3 / FSMC_A19 |
| دبوس 120 | PE4 — GPIO PE4 / FSMC_A20 |
| دبوس 121 | PE5 — GPIO PE5 / FSMC_A21 |
| دبوس 122 | PE6 — GPIO PE6 / FSMC_A22 |
| دبوس 123 | VSS — Ground |
| دبوس 124 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 125 | PG2 — GPIO PG2 / FSMC_A12 |
| دبوس 126 | PG3 — GPIO PG3 / FSMC_A13 |
| دبوس 127 | PG4 — GPIO PG4 / FSMC_A14 |
| دبوس 128 | PG5 — GPIO PG5 / FSMC_A15 |
| دبوس 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| دبوس 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| دبوس 131 | PG8 — GPIO PG8 |
| دبوس 132 | VSS — Ground |
| دبوس 133 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| دبوس 135 | PA0 — GPIO PA0 / WKUP |
| دبوس 136 | PA1 — GPIO PA1 |
| دبوس 137 | PA2 — GPIO PA2 |
| دبوس 138 | PA3 — GPIO PA3 |
| دبوس 139 | VSS — Ground |
| دبوس 140 | VDD — Digital power supply 1.7-3.6 V |
| دبوس 141 | PA4 — GPIO PA4 |
| دبوس 142 | PA5 — GPIO PA5 |
| دبوس 143 | PB6 — GPIO PB6 |
| دبوس 144 | PB7 — GPIO PB7 |
التطبيقات النموذجية
STM32F413ZHT3 مناسب لـ 6 التطبيقs: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
موصى به
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
موصى به
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
موصى به
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
موصى به
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
موصى به
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ STM32F413ZHT3 — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
أبرز الفروقات
- Dual DFSDM digital filter blocks for sigma-delta modulators (مقابلSTM32F407VGT6)
- USB OTG Full-Speed with internal PHY (مقابلSTM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (مقابلSTM32F407VGT6)
ملاحظات التصميم
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
معلومات الامتثال
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
