STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
MPN: STM32F413ZHT3 ✓ Hoạt độngSTM32F413ZHT3 Tóm tắt
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
Bộ thay thế dễ dàng lắp đặt cho STM32F413ZHT3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F413ZHT3 (cùng hình factor và footprint) — khác nhau ở ADC, Communication Interfaces, Core, Package, SRAM.
STM32F413ZHJ6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32F423ZHT6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F407VGT6
✅ Drop-In✗ Hết hàng
$7.55 / Đơn vị
Xem tài liệu →STM32F413ZHT3 Tỷ lệ tối đa & tính chất điện
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| Hộp | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| Nhiệt độ hoạt động | -40C to +125C (industrial grade) |
| Trạng thái RoHS | Compliant |
Cấu hình chân STM32F413ZHT3
| Chân 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| Chân 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| Chân 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| Chân 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| Chân 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| Chân 6 | VBAT — Battery backup power supply |
| Chân 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| Chân 8 | PC14 — GPIO PC14 / OSC32_IN |
| Chân 9 | PC15 — GPIO PC15 / OSC32_OUT |
| Chân 10 | VSS — Ground |
| Chân 11 | VDD — Digital power supply 1.7-3.6 V |
| Chân 12 | OSC_IN — HSE oscillator input |
| Chân 13 | OSC_OUT — HSE oscillator output |
| Chân 14 | NRST — Reset input, active low |
| Chân 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| Chân 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| Chân 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| Chân 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| Chân 19 | VREF+ — ADC positive reference voltage |
| Chân 20 | VDDA — Analog power supply |
| Chân 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| Chân 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| Chân 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| Chân 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| Chân 25 | VSS — Ground |
| Chân 26 | VDD — Digital power supply 1.7-3.6 V |
| Chân 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| Chân 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| Chân 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| Chân 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| Chân 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| Chân 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| Chân 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| Chân 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| Chân 35 | PB2 — GPIO PB2 / BOOT1 |
| Chân 36 | PE7 — GPIO PE7 / FSMC_D4 |
| Chân 37 | PE8 — GPIO PE8 / FSMC_D5 |
| Chân 38 | PE9 — GPIO PE9 / FSMC_D6 |
| Chân 39 | PE10 — GPIO PE10 / FSMC_D7 |
| Chân 40 | PE11 — GPIO PE11 / FSMC_D8 |
| Chân 41 | PE12 — GPIO PE12 / FSMC_D9 |
| Chân 42 | PE13 — GPIO PE13 / FSMC_D10 |
| Chân 43 | PE14 — GPIO PE14 / FSMC_D11 |
| Chân 44 | PE15 — GPIO PE15 / FSMC_D12 |
| Chân 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| Chân 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| Chân 47 | VSS — Ground |
| Chân 48 | VDD — Digital power supply 1.7-3.6 V |
| Chân 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| Chân 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| Chân 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| Chân 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| Chân 53 | PD8 — GPIO PD8 / FSMC_D13 |
| Chân 54 | PD9 — GPIO PD9 / FSMC_D14 |
| Chân 55 | PD10 — GPIO PD10 / FSMC_D15 |
| Chân 56 | PD11 — GPIO PD11 / FSMC_A16 |
| Chân 57 | PD12 — GPIO PD12 / FSMC_A17 |
| Chân 58 | PD13 — GPIO PD13 / FSMC_A18 |
| Chân 59 | PD14 — GPIO PD14 / FSMC_D0 |
| Chân 60 | PD15 — GPIO PD15 / FSMC_D1 |
| Chân 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| Chân 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| Chân 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| Chân 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| Chân 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| Chân 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| Chân 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| Chân 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| Chân 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| Chân 70 | PA13 — GPIO PA13 / SWDIO |
| Chân 71 | VSS — Ground |
| Chân 72 | VDD — Digital power supply 1.7-3.6 V |
| Chân 73 | PA14 — GPIO PA14 / SWCLK |
| Chân 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| Chân 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| Chân 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| Chân 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| Chân 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| Chân 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| Chân 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| Chân 81 | PD3 — GPIO PD3 / FSMC_CLK |
| Chân 82 | PD4 — GPIO PD4 / FSMC_NOE |
| Chân 83 | PD5 — GPIO PD5 / FSMC_NWE |
| Chân 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| Chân 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| Chân 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| Chân 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| Chân 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| Chân 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| Chân 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| Chân 91 | BOOT0 — Boot mode select |
| Chân 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| Chân 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| Chân 94 | PE0 — GPIO PE0 / TIM4_ETR |
| Chân 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| Chân 96 | VSS — Ground |
| Chân 97 | VDD — Digital power supply 1.7-3.6 V |
| Chân 98 | PF0 — GPIO PF0 / FSMC_A0 |
| Chân 99 | PF1 — GPIO PF1 / FSMC_A1 |
| Chân 100 | PF2 — GPIO PF2 / FSMC_A2 |
| Chân 101 | PF3 — GPIO PF3 / FSMC_A3 |
| Chân 102 | PF4 — GPIO PF4 / FSMC_A4 |
| Chân 103 | PF5 — GPIO PF5 / FSMC_A5 |
| Chân 104 | VSS — Ground |
| Chân 105 | VDD — Digital power supply 1.7-3.6 V |
| Chân 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| Chân 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| Chân 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| Chân 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| Chân 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| Chân 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| Chân 112 | PF12 — GPIO PF12 / FSMC_A6 |
| Chân 113 | PF13 — GPIO PF13 / FSMC_A7 |
| Chân 114 | PF14 — GPIO PF14 / FSMC_A8 |
| Chân 115 | PF15 — GPIO PF15 / FSMC_A9 |
| Chân 116 | PG0 — GPIO PG0 / FSMC_A10 |
| Chân 117 | PG1 — GPIO PG1 / FSMC_A11 |
| Chân 118 | PE2 — GPIO PE2 / FSMC_A23 |
| Chân 119 | PE3 — GPIO PE3 / FSMC_A19 |
| Chân 120 | PE4 — GPIO PE4 / FSMC_A20 |
| Chân 121 | PE5 — GPIO PE5 / FSMC_A21 |
| Chân 122 | PE6 — GPIO PE6 / FSMC_A22 |
| Chân 123 | VSS — Ground |
| Chân 124 | VDD — Digital power supply 1.7-3.6 V |
| Chân 125 | PG2 — GPIO PG2 / FSMC_A12 |
| Chân 126 | PG3 — GPIO PG3 / FSMC_A13 |
| Chân 127 | PG4 — GPIO PG4 / FSMC_A14 |
| Chân 128 | PG5 — GPIO PG5 / FSMC_A15 |
| Chân 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| Chân 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| Chân 131 | PG8 — GPIO PG8 |
| Chân 132 | VSS — Ground |
| Chân 133 | VDD — Digital power supply 1.7-3.6 V |
| Chân 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| Chân 135 | PA0 — GPIO PA0 / WKUP |
| Chân 136 | PA1 — GPIO PA1 |
| Chân 137 | PA2 — GPIO PA2 |
| Chân 138 | PA3 — GPIO PA3 |
| Chân 139 | VSS — Ground |
| Chân 140 | VDD — Digital power supply 1.7-3.6 V |
| Chân 141 | PA4 — GPIO PA4 |
| Chân 142 | PA5 — GPIO PA5 |
| Chân 143 | PB6 — GPIO PB6 |
| Chân 144 | PB7 — GPIO PB7 |
Ứng dụng tiêu biểu
STM32F413ZHT3 phù hợp cho 6 Áp dụngs: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
Được đề xuất
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
Được đề xuất
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
Được đề xuất
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
Được đề xuất
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
Được đề xuất
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F413ZHT3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
Bảo phân biệt quan trọng
- Dual DFSDM digital filter blocks for sigma-delta modulators (vsSTM32F407VGT6)
- USB OTG Full-Speed with internal PHY (vsSTM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (vsSTM32F407VGT6)
Ghi chú thiết kế
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
Thông tin tuân thủ
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
