STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
MPN: STM32F413ZHT3 ✓ AktifSTM32F413ZHT3 Ringkasan
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
Alternatif penggantian untuk STM32F413ZHT3 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian STM32F413ZHT3 (sama faktor bentuk dan footprint) — berbeda di dalam ADC, Communication Interfaces, Core, Package, SRAM.
STM32F413ZHJ6
✅ Drop-InKontak untuk harga
Lihat Datasheet →STM32F423ZHT6
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
STM32F407VGT6
✅ Drop-In✗ Habis Stok
$7.55 / Satuan
Lihat Datasheet →STM32F413ZHT3 Rating Maksimal & Karakteristik Listrik
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| Paket | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| Suhu Kerja | -40C to +125C (industrial grade) |
| Status RoHS | Compliant |
Konfigurasi Pin STM32F413ZHT3
| Pin produk 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| Pin produk 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| Pin produk 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| Pin produk 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| Pin produk 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| Pin produk 6 | VBAT — Battery backup power supply |
| Pin produk 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| Pin produk 8 | PC14 — GPIO PC14 / OSC32_IN |
| Pin produk 9 | PC15 — GPIO PC15 / OSC32_OUT |
| Pin produk 10 | VSS — Ground |
| Pin produk 11 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 12 | OSC_IN — HSE oscillator input |
| Pin produk 13 | OSC_OUT — HSE oscillator output |
| Pin produk 14 | NRST — Reset input, active low |
| Pin produk 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| Pin produk 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| Pin produk 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| Pin produk 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| Pin produk 19 | VREF+ — ADC positive reference voltage |
| Pin produk 20 | VDDA — Analog power supply |
| Pin produk 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| Pin produk 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| Pin produk 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| Pin produk 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| Pin produk 25 | VSS — Ground |
| Pin produk 26 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| Pin produk 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| Pin produk 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| Pin produk 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| Pin produk 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| Pin produk 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| Pin produk 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| Pin produk 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| Pin produk 35 | PB2 — GPIO PB2 / BOOT1 |
| Pin produk 36 | PE7 — GPIO PE7 / FSMC_D4 |
| Pin produk 37 | PE8 — GPIO PE8 / FSMC_D5 |
| Pin produk 38 | PE9 — GPIO PE9 / FSMC_D6 |
| Pin produk 39 | PE10 — GPIO PE10 / FSMC_D7 |
| Pin produk 40 | PE11 — GPIO PE11 / FSMC_D8 |
| Pin produk 41 | PE12 — GPIO PE12 / FSMC_D9 |
| Pin produk 42 | PE13 — GPIO PE13 / FSMC_D10 |
| Pin produk 43 | PE14 — GPIO PE14 / FSMC_D11 |
| Pin produk 44 | PE15 — GPIO PE15 / FSMC_D12 |
| Pin produk 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| Pin produk 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| Pin produk 47 | VSS — Ground |
| Pin produk 48 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| Pin produk 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| Pin produk 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| Pin produk 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| Pin produk 53 | PD8 — GPIO PD8 / FSMC_D13 |
| Pin produk 54 | PD9 — GPIO PD9 / FSMC_D14 |
| Pin produk 55 | PD10 — GPIO PD10 / FSMC_D15 |
| Pin produk 56 | PD11 — GPIO PD11 / FSMC_A16 |
| Pin produk 57 | PD12 — GPIO PD12 / FSMC_A17 |
| Pin produk 58 | PD13 — GPIO PD13 / FSMC_A18 |
| Pin produk 59 | PD14 — GPIO PD14 / FSMC_D0 |
| Pin produk 60 | PD15 — GPIO PD15 / FSMC_D1 |
| Pin produk 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| Pin produk 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| Pin produk 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| Pin produk 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| Pin produk 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| Pin produk 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| Pin produk 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| Pin produk 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| Pin produk 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| Pin produk 70 | PA13 — GPIO PA13 / SWDIO |
| Pin produk 71 | VSS — Ground |
| Pin produk 72 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 73 | PA14 — GPIO PA14 / SWCLK |
| Pin produk 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| Pin produk 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| Pin produk 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| Pin produk 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| Pin produk 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| Pin produk 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| Pin produk 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| Pin produk 81 | PD3 — GPIO PD3 / FSMC_CLK |
| Pin produk 82 | PD4 — GPIO PD4 / FSMC_NOE |
| Pin produk 83 | PD5 — GPIO PD5 / FSMC_NWE |
| Pin produk 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| Pin produk 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| Pin produk 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| Pin produk 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| Pin produk 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| Pin produk 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| Pin produk 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| Pin produk 91 | BOOT0 — Boot mode select |
| Pin produk 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| Pin produk 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| Pin produk 94 | PE0 — GPIO PE0 / TIM4_ETR |
| Pin produk 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| Pin produk 96 | VSS — Ground |
| Pin produk 97 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 98 | PF0 — GPIO PF0 / FSMC_A0 |
| Pin produk 99 | PF1 — GPIO PF1 / FSMC_A1 |
| Pin produk 100 | PF2 — GPIO PF2 / FSMC_A2 |
| Pin produk 101 | PF3 — GPIO PF3 / FSMC_A3 |
| Pin produk 102 | PF4 — GPIO PF4 / FSMC_A4 |
| Pin produk 103 | PF5 — GPIO PF5 / FSMC_A5 |
| Pin produk 104 | VSS — Ground |
| Pin produk 105 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| Pin produk 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| Pin produk 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| Pin produk 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| Pin produk 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| Pin produk 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| Pin produk 112 | PF12 — GPIO PF12 / FSMC_A6 |
| Pin produk 113 | PF13 — GPIO PF13 / FSMC_A7 |
| Pin produk 114 | PF14 — GPIO PF14 / FSMC_A8 |
| Pin produk 115 | PF15 — GPIO PF15 / FSMC_A9 |
| Pin produk 116 | PG0 — GPIO PG0 / FSMC_A10 |
| Pin produk 117 | PG1 — GPIO PG1 / FSMC_A11 |
| Pin produk 118 | PE2 — GPIO PE2 / FSMC_A23 |
| Pin produk 119 | PE3 — GPIO PE3 / FSMC_A19 |
| Pin produk 120 | PE4 — GPIO PE4 / FSMC_A20 |
| Pin produk 121 | PE5 — GPIO PE5 / FSMC_A21 |
| Pin produk 122 | PE6 — GPIO PE6 / FSMC_A22 |
| Pin produk 123 | VSS — Ground |
| Pin produk 124 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 125 | PG2 — GPIO PG2 / FSMC_A12 |
| Pin produk 126 | PG3 — GPIO PG3 / FSMC_A13 |
| Pin produk 127 | PG4 — GPIO PG4 / FSMC_A14 |
| Pin produk 128 | PG5 — GPIO PG5 / FSMC_A15 |
| Pin produk 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| Pin produk 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| Pin produk 131 | PG8 — GPIO PG8 |
| Pin produk 132 | VSS — Ground |
| Pin produk 133 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| Pin produk 135 | PA0 — GPIO PA0 / WKUP |
| Pin produk 136 | PA1 — GPIO PA1 |
| Pin produk 137 | PA2 — GPIO PA2 |
| Pin produk 138 | PA3 — GPIO PA3 |
| Pin produk 139 | VSS — Ground |
| Pin produk 140 | VDD — Digital power supply 1.7-3.6 V |
| Pin produk 141 | PA4 — GPIO PA4 |
| Pin produk 142 | PA5 — GPIO PA5 |
| Pin produk 143 | PB6 — GPIO PB6 |
| Pin produk 144 | PB7 — GPIO PB7 |
Aplikasi Umum
STM32F413ZHT3 cocok untuk 6 aplikasis: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
Direkomendasikan
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
Direkomendasikan
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
Direkomendasikan
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
Direkomendasikan
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
Direkomendasikan
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk STM32F413ZHT3 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
Diferensiator Kunci
- Dual DFSDM digital filter blocks for sigma-delta modulators (vsSTM32F407VGT6)
- USB OTG Full-Speed with internal PHY (vsSTM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (vsSTM32F407VGT6)
Catatan Desain
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
Informasi Konformitas
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
