STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
MPN: STM32F413ZHT3 ✓ פעילSTM32F413ZHT3 סקירה
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
חלופות תחליף ישיר עבור STM32F413ZHT3 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם STM32F413ZHT3 (אותו גורם צורה וטביעת רגל) — שונים ב ADC, Communication Interfaces, Core, Package, SRAM.
STM32F413ZHJ6
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←STM32F423ZHT6
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
STM32F407VGT6
✅ Drop-In✗ אזל מהמלאי
$7.55 / יחידה
הצג גיליון נתונים ←STM32F413ZHT3 דירוגים מרביים ומאפיינים חשמליים
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| מארז | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| טמפרטורת פעולה | -40C to +125C (industrial grade) |
| סטטוס RoHS | Compliant |
תצורת פינים של STM32F413ZHT3
| פין 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| פין 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| פין 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| פין 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| פין 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| פין 6 | VBAT — Battery backup power supply |
| פין 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| פין 8 | PC14 — GPIO PC14 / OSC32_IN |
| פין 9 | PC15 — GPIO PC15 / OSC32_OUT |
| פין 10 | VSS — Ground |
| פין 11 | VDD — Digital power supply 1.7-3.6 V |
| פין 12 | OSC_IN — HSE oscillator input |
| פין 13 | OSC_OUT — HSE oscillator output |
| פין 14 | NRST — Reset input, active low |
| פין 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| פין 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| פין 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| פין 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| פין 19 | VREF+ — ADC positive reference voltage |
| פין 20 | VDDA — Analog power supply |
| פין 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| פין 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| פין 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| פין 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| פין 25 | VSS — Ground |
| פין 26 | VDD — Digital power supply 1.7-3.6 V |
| פין 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| פין 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| פין 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| פין 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| פין 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| פין 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| פין 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| פין 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| פין 35 | PB2 — GPIO PB2 / BOOT1 |
| פין 36 | PE7 — GPIO PE7 / FSMC_D4 |
| פין 37 | PE8 — GPIO PE8 / FSMC_D5 |
| פין 38 | PE9 — GPIO PE9 / FSMC_D6 |
| פין 39 | PE10 — GPIO PE10 / FSMC_D7 |
| פין 40 | PE11 — GPIO PE11 / FSMC_D8 |
| פין 41 | PE12 — GPIO PE12 / FSMC_D9 |
| פין 42 | PE13 — GPIO PE13 / FSMC_D10 |
| פין 43 | PE14 — GPIO PE14 / FSMC_D11 |
| פין 44 | PE15 — GPIO PE15 / FSMC_D12 |
| פין 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| פין 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| פין 47 | VSS — Ground |
| פין 48 | VDD — Digital power supply 1.7-3.6 V |
| פין 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| פין 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| פין 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| פין 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| פין 53 | PD8 — GPIO PD8 / FSMC_D13 |
| פין 54 | PD9 — GPIO PD9 / FSMC_D14 |
| פין 55 | PD10 — GPIO PD10 / FSMC_D15 |
| פין 56 | PD11 — GPIO PD11 / FSMC_A16 |
| פין 57 | PD12 — GPIO PD12 / FSMC_A17 |
| פין 58 | PD13 — GPIO PD13 / FSMC_A18 |
| פין 59 | PD14 — GPIO PD14 / FSMC_D0 |
| פין 60 | PD15 — GPIO PD15 / FSMC_D1 |
| פין 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| פין 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| פין 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| פין 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| פין 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| פין 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| פין 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| פין 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| פין 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| פין 70 | PA13 — GPIO PA13 / SWDIO |
| פין 71 | VSS — Ground |
| פין 72 | VDD — Digital power supply 1.7-3.6 V |
| פין 73 | PA14 — GPIO PA14 / SWCLK |
| פין 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| פין 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| פין 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| פין 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| פין 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| פין 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| פין 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| פין 81 | PD3 — GPIO PD3 / FSMC_CLK |
| פין 82 | PD4 — GPIO PD4 / FSMC_NOE |
| פין 83 | PD5 — GPIO PD5 / FSMC_NWE |
| פין 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| פין 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| פין 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| פין 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| פין 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| פין 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| פין 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| פין 91 | BOOT0 — Boot mode select |
| פין 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| פין 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| פין 94 | PE0 — GPIO PE0 / TIM4_ETR |
| פין 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| פין 96 | VSS — Ground |
| פין 97 | VDD — Digital power supply 1.7-3.6 V |
| פין 98 | PF0 — GPIO PF0 / FSMC_A0 |
| פין 99 | PF1 — GPIO PF1 / FSMC_A1 |
| פין 100 | PF2 — GPIO PF2 / FSMC_A2 |
| פין 101 | PF3 — GPIO PF3 / FSMC_A3 |
| פין 102 | PF4 — GPIO PF4 / FSMC_A4 |
| פין 103 | PF5 — GPIO PF5 / FSMC_A5 |
| פין 104 | VSS — Ground |
| פין 105 | VDD — Digital power supply 1.7-3.6 V |
| פין 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| פין 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| פין 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| פין 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| פין 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| פין 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| פין 112 | PF12 — GPIO PF12 / FSMC_A6 |
| פין 113 | PF13 — GPIO PF13 / FSMC_A7 |
| פין 114 | PF14 — GPIO PF14 / FSMC_A8 |
| פין 115 | PF15 — GPIO PF15 / FSMC_A9 |
| פין 116 | PG0 — GPIO PG0 / FSMC_A10 |
| פין 117 | PG1 — GPIO PG1 / FSMC_A11 |
| פין 118 | PE2 — GPIO PE2 / FSMC_A23 |
| פין 119 | PE3 — GPIO PE3 / FSMC_A19 |
| פין 120 | PE4 — GPIO PE4 / FSMC_A20 |
| פין 121 | PE5 — GPIO PE5 / FSMC_A21 |
| פין 122 | PE6 — GPIO PE6 / FSMC_A22 |
| פין 123 | VSS — Ground |
| פין 124 | VDD — Digital power supply 1.7-3.6 V |
| פין 125 | PG2 — GPIO PG2 / FSMC_A12 |
| פין 126 | PG3 — GPIO PG3 / FSMC_A13 |
| פין 127 | PG4 — GPIO PG4 / FSMC_A14 |
| פין 128 | PG5 — GPIO PG5 / FSMC_A15 |
| פין 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| פין 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| פין 131 | PG8 — GPIO PG8 |
| פין 132 | VSS — Ground |
| פין 133 | VDD — Digital power supply 1.7-3.6 V |
| פין 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| פין 135 | PA0 — GPIO PA0 / WKUP |
| פין 136 | PA1 — GPIO PA1 |
| פין 137 | PA2 — GPIO PA2 |
| פין 138 | PA3 — GPIO PA3 |
| פין 139 | VSS — Ground |
| פין 140 | VDD — Digital power supply 1.7-3.6 V |
| פין 141 | PA4 — GPIO PA4 |
| פין 142 | PA5 — GPIO PA5 |
| פין 143 | PB6 — GPIO PB6 |
| פין 144 | PB7 — GPIO PB7 |
יישומים טיפוסיים
STM32F413ZHT3 מתאים עבור 6 יישוםs: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
מומלץ
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
מומלץ
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
מומלץ
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
מומלץ
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
מומלץ
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור STM32F413ZHT3 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
מבדילים עיקריים
- Dual DFSDM digital filter blocks for sigma-delta modulators (לעומתSTM32F407VGT6)
- USB OTG Full-Speed with internal PHY (לעומתSTM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (לעומתSTM32F407VGT6)
הערות תכנון
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
מידע על תאימות
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
