STM32F413ZHT3 - 100MHz Cortex-M4 MCU 1.5MB Flash 144-LQFP | STMicroelectronics
MPN: STM32F413ZHT3 ✓ فعالSTM32F413ZHT3 نمای کلی
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit RISC processor core designed by Arm Holdings for embedded applications, featuring a single-precision floating-point unit (FPU) and Digital Signal Processing (DSP) instructions. It sits within the broader taxonomy of microcontroller -> 32-bit MCU -> ARM Cortex-M family -> Cortex-M4 sub-family -> power management IC ecosystem. Cortex-M4 MCUs target applications requiring deterministic real-time control combined with signal processing, replacing combinations of 8/16-bit MCUs and external DSPs in compact BOMs.
Key features of the STM32F413ZHT3 include 1.5 MB of embedded Flash with read-while-write support, 320 KB of SRAM (including 4 KB of backup SRAM), a 100 MHz Cortex-M4F core with single-precision FPU, and a low-power RTC with sub-second accuracy. The device also includes a 4 KB backup register area, a true random number generator (TRNG), and cryptographic acceleration supporting AES-256, plus a USB 2.0 Full-Speed On-The-Go controller with internal PHY.
Architecturally, the STM32F413ZHT3 uses ST's 90 nm embedded Flash process, integrates an L1 cache to offset Flash wait-states at 100 MHz, and supports memory-mapped external memories through its Flexible Static Memory Controller (FSMC). The dual DFSDM blocks enable hardware sigma-delta demodulation for MEMS microphones and isolated current sensing, which is unusual in this MCU class.
Typical applications include industrial motor control (BLDC/PMSM via timers + DFSDM), building automation HMI panels, USB-powered measurement instruments, audio front-ends (USB Audio + DACs), and IoT gateways using the integrated USB OTG plus CAN bus. The wide 1.7 V to 3.6 V supply range also suits battery-powered designs with direct Li-Ion cell connection.
When designing with this part, consider that the 144-LQFP package has limited thermal headroom; at full 100 MHz operation with all peripherals active, expect around 120 mA core current. The DFSDM digital filter is a key advantage in audio and sensor applications but requires a separate sigma-delta modulator in the signal chain.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Engineers evaluating second sources for STMicroelectronics STM32F413ZHT3 should consider same-package and pin-compatible cross-references listed below.
جایگزین‌های drop-in برای STM32F413ZHT3 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32F413ZHT3 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در ADC, Communication Interfaces, Core, Package, SRAM.
STM32F413ZHJ6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F423ZHT6
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
STM32F407VGT6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32F413ZHT3 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Core | ARM Cortex-M4F with FPU and DSP |
| Maximum Clock Speed | 100 MHz |
| Core Mark Performance | 125 DMIPS |
| Flash Memory | 1.5 MB |
| SRAM | 320 KB (including 4 KB backup SRAM) |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC | 1 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit |
| DFSDM | 2 digital filter blocks for sigma-delta modulators |
| USB | USB 2.0 OTG Full-Speed with internal PHY |
| Communication Interfaces | USART, SPI, I2C, CAN, USB OTG FS, SDMMC |
| بسته‌بندی | 144-LQFP (20x20 mm) |
| I/O Count | 114 GPIO |
| دمای کاری | -40C to +125C (industrial grade) |
| وضعیت RoHS | Compliant |
پیکربندی پین STM32F413ZHT3
| پین 1 | PE2 — GPIO PE2 / TRACECLK / FSMC_A23 |
| پین 2 | PE3 — GPIO PE3 / TRACED0 / FSMC_A19 |
| پین 3 | PE4 — GPIO PE4 / TRACED1 / FSMC_A20 |
| پین 4 | PE5 — GPIO PE5 / TRACED2 / FSMC_A21 |
| پین 5 | PE6 — GPIO PE6 / TRACED3 / FSMC_A22 |
| پین 6 | VBAT — Battery backup power supply |
| پین 7 | PC13 — GPIO PC13 / RTC_TAMP1 / RTC_OUT |
| پین 8 | PC14 — GPIO PC14 / OSC32_IN |
| پین 9 | PC15 — GPIO PC15 / OSC32_OUT |
| پین 10 | VSS — Ground |
| پین 11 | VDD — Digital power supply 1.7-3.6 V |
| پین 12 | OSC_IN — HSE oscillator input |
| پین 13 | OSC_OUT — HSE oscillator output |
| پین 14 | NRST — Reset input, active low |
| پین 15 | PC0 — GPIO PC0 / ADC1_IN10 |
| پین 16 | PC1 — GPIO PC1 / ADC1_IN11 |
| پین 17 | PC2 — GPIO PC2 / ADC1_IN12 |
| پین 18 | PC3 — GPIO PC3 / ADC1_IN13 |
| پین 19 | VREF+ — ADC positive reference voltage |
| پین 20 | VDDA — Analog power supply |
| پین 21 | PA0 — GPIO PA0 / WKUP / TIM2_CH1_ETR |
| پین 22 | PA1 — GPIO PA1 / TIM2_CH2 |
| پین 23 | PA2 — GPIO PA2 / TIM2_CH3 / USART2_TX |
| پین 24 | PA3 — GPIO PA3 / TIM2_CH4 / USART2_RX |
| پین 25 | VSS — Ground |
| پین 26 | VDD — Digital power supply 1.7-3.6 V |
| پین 27 | PA4 — GPIO PA4 / SPI1_NSS / DAC1_OUT |
| پین 28 | PA5 — GPIO PA5 / SPI1_SCK / DAC2_OUT |
| پین 29 | PA6 — GPIO PA6 / SPI1_MISO / TIM13_CH1 |
| پین 30 | PA7 — GPIO PA7 / SPI1_MOSI / TIM14_CH1 |
| پین 31 | PC4 — GPIO PC4 / ADC1_IN14 |
| پین 32 | PC5 — GPIO PC5 / ADC1_IN15 |
| پین 33 | PB0 — GPIO PB0 / TIM3_CH3 / ADC1_IN8 |
| پین 34 | PB1 — GPIO PB1 / TIM3_CH4 / ADC1_IN9 |
| پین 35 | PB2 — GPIO PB2 / BOOT1 |
| پین 36 | PE7 — GPIO PE7 / FSMC_D4 |
| پین 37 | PE8 — GPIO PE8 / FSMC_D5 |
| پین 38 | PE9 — GPIO PE9 / FSMC_D6 |
| پین 39 | PE10 — GPIO PE10 / FSMC_D7 |
| پین 40 | PE11 — GPIO PE11 / FSMC_D8 |
| پین 41 | PE12 — GPIO PE12 / FSMC_D9 |
| پین 42 | PE13 — GPIO PE13 / FSMC_D10 |
| پین 43 | PE14 — GPIO PE14 / FSMC_D11 |
| پین 44 | PE15 — GPIO PE15 / FSMC_D12 |
| پین 45 | PB10 — GPIO PB10 / I2C2_SCL / USART3_TX |
| پین 46 | PB11 — GPIO PB11 / I2C2_SDA / USART3_RX |
| پین 47 | VSS — Ground |
| پین 48 | VDD — Digital power supply 1.7-3.6 V |
| پین 49 | PB12 — GPIO PB12 / SPI2_NSS / I2S2_WS |
| پین 50 | PB13 — GPIO PB13 / SPI2_SCK / I2S2_CK |
| پین 51 | PB14 — GPIO PB14 / SPI2_MISO / TIM12_CH1 |
| پین 52 | PB15 — GPIO PB15 / SPI2_MOSI / TIM12_CH2 |
| پین 53 | PD8 — GPIO PD8 / FSMC_D13 |
| پین 54 | PD9 — GPIO PD9 / FSMC_D14 |
| پین 55 | PD10 — GPIO PD10 / FSMC_D15 |
| پین 56 | PD11 — GPIO PD11 / FSMC_A16 |
| پین 57 | PD12 — GPIO PD12 / FSMC_A17 |
| پین 58 | PD13 — GPIO PD13 / FSMC_A18 |
| پین 59 | PD14 — GPIO PD14 / FSMC_D0 |
| پین 60 | PD15 — GPIO PD15 / FSMC_D1 |
| پین 61 | PC6 — GPIO PC6 / TIM3_CH1 / USART6_TX |
| پین 62 | PC7 — GPIO PC7 / TIM3_CH2 / USART6_RX |
| پین 63 | PC8 — GPIO PC8 / TIM3_CH3 / SDMMC_D0 |
| پین 64 | PC9 — GPIO PC9 / TIM3_CH4 / SDMMC_D1 |
| پین 65 | PA8 — GPIO PA8 / TIM1_CH1 / USART1_CK |
| پین 66 | PA9 — GPIO PA9 / TIM1_CH2 / USART1_TX |
| پین 67 | PA10 — GPIO PA10 / TIM1_CH3 / USART1_RX |
| پین 68 | PA11 — GPIO PA11 / CAN1_RX / USB_DM |
| پین 69 | PA12 — GPIO PA12 / CAN1_TX / USB_DP |
| پین 70 | PA13 — GPIO PA13 / SWDIO |
| پین 71 | VSS — Ground |
| پین 72 | VDD — Digital power supply 1.7-3.6 V |
| پین 73 | PA14 — GPIO PA14 / SWCLK |
| پین 74 | PA15 — GPIO PA15 / TIM2_CH1_ETR / SPI1_NSS |
| پین 75 | PC10 — GPIO PC10 / UART4_TX / SDMMC_D2 |
| پین 76 | PC11 — GPIO PC11 / UART4_RX / SDMMC_D3 |
| پین 77 | PC12 — GPIO PC12 / UART5_TX / SDMMC_CK |
| پین 78 | PD0 — GPIO PD0 / CAN1_RX / FSMC_D2 |
| پین 79 | PD1 — GPIO PD1 / CAN1_TX / FSMC_D3 |
| پین 80 | PD2 — GPIO PD2 / SDMMC_CMD / TIM3_ETR |
| پین 81 | PD3 — GPIO PD3 / FSMC_CLK |
| پین 82 | PD4 — GPIO PD4 / FSMC_NOE |
| پین 83 | PD5 — GPIO PD5 / FSMC_NWE |
| پین 84 | PD6 — GPIO PD6 / FSMC_NWAIT |
| پین 85 | PD7 — GPIO PD7 / FSMC_NE1 |
| پین 86 | PB3 — GPIO PB3 / SWO / TIM2_CH2 |
| پین 87 | PB4 — GPIO PB4 / TIM3_CH1 |
| پین 88 | PB5 — GPIO PB5 / TIM3_CH2 |
| پین 89 | PB6 — GPIO PB6 / I2C1_SCL / USART1_TX |
| پین 90 | PB7 — GPIO PB7 / I2C1_SDA / USART1_RX |
| پین 91 | BOOT0 — Boot mode select |
| پین 92 | PB8 — GPIO PB8 / TIM4_CH3 / I2C1_SCL |
| پین 93 | PB9 — GPIO PB9 / TIM4_CH4 / I2C1_SDA |
| پین 94 | PE0 — GPIO PE0 / TIM4_ETR |
| پین 95 | PE1 — GPIO PE1 / FSMC_NBL0 |
| پین 96 | VSS — Ground |
| پین 97 | VDD — Digital power supply 1.7-3.6 V |
| پین 98 | PF0 — GPIO PF0 / FSMC_A0 |
| پین 99 | PF1 — GPIO PF1 / FSMC_A1 |
| پین 100 | PF2 — GPIO PF2 / FSMC_A2 |
| پین 101 | PF3 — GPIO PF3 / FSMC_A3 |
| پین 102 | PF4 — GPIO PF4 / FSMC_A4 |
| پین 103 | PF5 — GPIO PF5 / FSMC_A5 |
| پین 104 | VSS — Ground |
| پین 105 | VDD — Digital power supply 1.7-3.6 V |
| پین 106 | PF6 — GPIO PF6 / TIM10_CH1 |
| پین 107 | PF7 — GPIO PF7 / TIM11_CH1 |
| پین 108 | PF8 — GPIO PF8 / TIM12_CH1 |
| پین 109 | PF9 — GPIO PF9 / TIM13_CH1 |
| پین 110 | PF10 — GPIO PF10 / TIM14_CH1 |
| پین 111 | PF11 — GPIO PF11 / FSMC_NRAS |
| پین 112 | PF12 — GPIO PF12 / FSMC_A6 |
| پین 113 | PF13 — GPIO PF13 / FSMC_A7 |
| پین 114 | PF14 — GPIO PF14 / FSMC_A8 |
| پین 115 | PF15 — GPIO PF15 / FSMC_A9 |
| پین 116 | PG0 — GPIO PG0 / FSMC_A10 |
| پین 117 | PG1 — GPIO PG1 / FSMC_A11 |
| پین 118 | PE2 — GPIO PE2 / FSMC_A23 |
| پین 119 | PE3 — GPIO PE3 / FSMC_A19 |
| پین 120 | PE4 — GPIO PE4 / FSMC_A20 |
| پین 121 | PE5 — GPIO PE5 / FSMC_A21 |
| پین 122 | PE6 — GPIO PE6 / FSMC_A22 |
| پین 123 | VSS — Ground |
| پین 124 | VDD — Digital power supply 1.7-3.6 V |
| پین 125 | PG2 — GPIO PG2 / FSMC_A12 |
| پین 126 | PG3 — GPIO PG3 / FSMC_A13 |
| پین 127 | PG4 — GPIO PG4 / FSMC_A14 |
| پین 128 | PG5 — GPIO PG5 / FSMC_A15 |
| پین 129 | PG6 — GPIO PG6 / FSMC_INT2 |
| پین 130 | PG7 — GPIO PG7 / FSMC_INT3 |
| پین 131 | PG8 — GPIO PG8 |
| پین 132 | VSS — Ground |
| پین 133 | VDD — Digital power supply 1.7-3.6 V |
| پین 134 | PC13 — GPIO PC13 / RTC_TAMP1 |
| پین 135 | PA0 — GPIO PA0 / WKUP |
| پین 136 | PA1 — GPIO PA1 |
| پین 137 | PA2 — GPIO PA2 |
| پین 138 | PA3 — GPIO PA3 |
| پین 139 | VSS — Ground |
| پین 140 | VDD — Digital power supply 1.7-3.6 V |
| پین 141 | PA4 — GPIO PA4 |
| پین 142 | PA5 — GPIO PA5 |
| پین 143 | PB6 — GPIO PB6 |
| پین 144 | PB7 — GPIO PB7 |
کاربردهای معمول
STM32F413ZHT3 مناسب است برای 6 کاربردs: Industrial Motor Control (BLDC/PMSM), USB Audio Interface and DAC, Building Automation HMI Panel, USB-Powered Measurement Instrument, IoT Gateway with CAN and USB, Digital Sensor Hub with DFSDM.
Industrial Motor Control (BLDC/PMSM)
The STM32F413ZHT3 fits BLDC and PMSM motor control with its 100 MHz Cortex-M4F DSP extensions, advanced timer array (TIM1, TIM8 with complementary PWM), and dual DFSDM blocks for isolated current sensing. The 1.5 MB Flash and 320 KB SRAM handle field-oriented control (FOC) algorithms with sensorless observer routines. The 144-LQFP exposes enough pins for 3-phase PWM generation, Hall/encoder inputs, and CAN bus communication to a host controller.
پیشنهادی
USB Audio Interface and DAC
The STM32F413ZHT3 serves as a USB Audio Class 2.0 device with internal PHY, streaming up to 24-bit/96 kHz audio to a paired external DAC. The dual 12-bit DACs and DFSDM blocks support microphone arrays and headphone monitoring. Cortex-M4F DSP extensions enable real-time EQ, mixing, and limiter algorithms in the same firmware loop.
پیشنهادی
Building Automation HMI Panel
The 100 MHz Cortex-M4F and 1.5 MB Flash drive TFT LCD panels up to 480x272 through FSMC, while the 320 KB SRAM keeps double-buffered GUIs responsive. The 144-LQFP exposes 114 GPIO for capacitive touch sensing, RS-485 transceivers, and CAN bus to HVAC controllers. The low-power RTC with calendar and tamper detection suits battery-backed wall-mount operation.
پیشنهادی
USB-Powered Measurement Instrument
The STM32F413ZHT3 operates from a USB 5 V rail with internal 3.3 V LDO regulation, providing a 1 MSPS 12-bit ADC plus two 12-bit DACs for analog front-end stimulus. The 1.5 MB Flash holds calibration tables and DSP filter coefficients for FFT/octave-band analysis. USB OTG Full-Speed with internal PHY eliminates the need for an external ULPI chip, reducing BOM cost for compact instruments.
پیشنهادی
IoT Gateway with CAN and USB
The STM32F413ZHT3 aggregates sensor data from CAN 2.0B and RS-485 buses, then bridges to a host via USB or Ethernet (external PHY). The 1.5 MB Flash and 320 KB SRAM run a lightweight MQTT or Modbus gateway stack with local caching. The Cortex-M4F core handles TLS handshake and certificate parsing in software when needed.
پیشنهادی
Digital Sensor Hub with DFSDM
The dual DFSDM blocks on the STM32F413ZHT3 connect to up to 8 sigma-delta MEMS microphones or isolated current-sense modulators, with hardware digital filtering. This eliminates the CPU overhead of bit-banging PDM streams and enables multi-channel beamforming or power-quality monitoring. The 144-LQFP pin count supports external modulator clock distribution.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای STM32F413ZHT3 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | STM32F413ZHJ6 | STM32F423ZHT6 | STM32F407VGT6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 100-LQFP - different |
| Core | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 100 MHz | Cortex-M4F 168 MHz |
| Flash | 1.5 MB | 1.5 MB | 1.5 MB | 1 MB |
| SRAM | 320 KB | 320 KB | 320 KB | 192 KB |
| USB | USB OTG FS (internal PHY) | USB OTG FS | USB OTG FS | USB OTG FS + ULPI |
| DFSDM | 2 blocks | 2 blocks | 2 blocks | Not available |
| Ethernet MAC | Not available | Not available | Not available | 10/100 Mbit/s |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +85C | -40C to +85C |
تفاوت‌های کلیدی
- Dual DFSDM digital filter blocks for sigma-delta modulators (در مقابلSTM32F407VGT6)
- USB OTG Full-Speed with internal PHY (در مقابلSTM32F407VGT6)
- 1.5 MB Flash vs typical 1 MB in same class (در مقابلSTM32F407VGT6)
یادداشت‌های طراحی
The STM32F413ZHT3 requires a 1.7-3.6 V supply on VDD/VDDA with separate decoupling on each pair. A 100 nF ceramic cap on every VDD pin and a 4.7 uF bulk capacitor on VDDA are recommended per ST application note AN4325. Core current can reach 120 mA at 100 MHz with all peripherals active, so use a regulator with at least 200 mA headroom. For USB applications, ensure VDD stays above 3.0 V during bus peaks.
The 144-LQFP package has 0.5 mm pitch leads requiring careful PCB layout. Use 0.25 mm-wide traces with 0.2 mm spacing and break out the inner GPIO bank to inner layers through 0.2 mm vias. Place a continuous ground plane beneath the package and route the high-speed USB DP/DM pair as a 90-ohm differential with no more than 2 vias total. Reference the STM32 hardware design guide UM1855 for full PCB stackup recommendations.
Estimated: At 100 MHz operation with all peripherals active, the STM32F413ZHT3 dissipates approximately 0.5-0.8 W. The 144-LQFP package has a theta_JA around 40 C/W, giving a 30C junction temperature rise above ambient. For industrial 85C ambient, this keeps junction below 125C, but for full -40C to +125C operation, derate the clock frequency to 64 MHz or improve PCB copper pour to lower theta_JA to 30 C/W.
The DFSDM peripheral on STM32F413ZHT3 requires careful clock configuration - the DFSDM clock must be enabled in RCC before configuring the digital filter. The USB OTG FS internal PHY requires the VDDUSB pin to be supplied; on this package VDDUSB is internally bonded to VDD. The 144-LQFP package is NOT pin-compatible with the 100-LQFP or 64-LQFP STM32F4 variants despite similar marking schemes.
اطلاعات انطباق
RoHS compliant per ST product page. Industrial temperature grade -40C to +125C. Not AEC-Q100 qualified - choose STM32F413ZHT3 automotive variant for automotive use.
