ژێرپۆلەکان

📁 Analog Switches 1 بەرهەمەکان 📁 Audio Codecs 59 بەرهەمەکان 📁 Bus Repeaters, Buffers & Extenders 2 بەرهەمەکان 📁 Communication ICs 1 بەرهەمەکان 📁 Digital Isolators 15 بەرهەمەکان 📁 Drivers, Receivers, Transceivers 5 بەرهەمەکان 📁 Ethernet ICs 1 بەرهەمەکان 📁 Ethernet PHYs 8 بەرهەمەکان 📁 Ethernet Transceivers 7 بەرهەمەکان 📁 I/O Expanders 3 بەرهەمەکان 📁 I2C 1 بەرهەمەکان 📁 Industrial Interfaces 1 بەرهەمەکان 📁 Interface Transceivers 5 بەرهەمەکان 📁 LIN Transceivers 28 بەرهەمەکان 📁 LVDS Drivers 1 بەرهەمەکان 📁 Logic Drivers 1 بەرهەمەکان 📁 Logic ICs 7 بەرهەمەکان 📁 Modems 1 بەرهەمەکان 📁 Network Interface 1 بەرهەمەکان 📁 PCI Express Switches 0 بەرهەمەکان 📁 RS-232/RS-422/RS-485 Interface 4 بەرهەمەکان 📁 RS-485 Transceivers 23 بەرهەمەکان 📁 RS-485/RS-422 22 بەرهەمەکان 📁 Sensor and Detector Interfaces 0 بەرهەمەکان 📁 SerDes 0 بەرهەمەکان 📁 Signal Buffers, Repeaters 2 بەرهەمەکان 📁 Signal Processing 0 بەرهەمەکان 📁 Specialized Interface 1 بەرهەمەکان 📁 Telephony Interfaces 2 بەرهەمەکان 📁 Touch Screen Controllers 1 بەرهەمەکان 📁 USB Connectors 4 بەرهەمەکان 📁 USB Controllers 1 بەرهەمەکان 📁 USB Hubs 1 بەرهەمەکان 📁 USB Interface ICs 37 بەرهەمەکان 📁 Video Codecs 0 بەرهەمەکان 📁 Video ICs 78 بەرهەمەکان

بەرهەمەکان (560+)

ADUM5411ARWZ-RL7 - 4-Ch Isolator w/ DC-DC | Analog Devices
ADUM5411ARWZ-RL7

ADUM5411ARWZ-RL7 - 4-Ch Isolator w/ DC-DC | Analog Devices

The ADUM5411ARWZ-RL7 is a quad-channel digital isolator with an integrated, isolated DC-to-DC converter, manufactured by Analog Devices. It is part of the ADuM5410/ADuM5411/ADuM5412 family, which utilizes iCoupler technology to provide regulated, isolated power adjustable between 3.15 V and 5.25 V. This device eliminates the need for a separate, isolated DC-to-DC converter in low-power applications, simplifying design and reducing board space. The ADUM5411ARWZ-RL7 is offered in a 24-lead SOIC-W package and is available in tape and reel packaging. Digital isolators are components that transfer digital signals across an isolation barrier while preventing unwanted DC and noise from passing. They are essential in applications requiring galvanic isolation for safety, noise immunity, or ground loop elimination. The ADUM5411 integrates the isolation barrier and power conversion, making it a complete solution for isolated data and power transfer. This integration is part of the broader category of interface ICs, specifically digital isolators, which are critical in industrial, medical, and communication systems. Key features of the ADUM5411ARWZ-RL7 include a data rate of 150 Mbps, a common-mode transient immunity (CMTI) of 75 kV/µs, and an isolation voltage rating of 2500 Vrms. The integrated DC-to-DC converter provides up to 500 mW of isolated output power, with an adjustable output voltage from 3.15 V to 5.25 V. The device operates over a wide temperature range of -40°C to +125°C, making it suitable for harsh environments. It also features low propagation delay and high noise immunity, ensuring reliable signal integrity. Technically, the ADUM5411 uses Analog Devices' iCoupler technology, which employs chip-scale transformers to achieve isolation. This technology offers advantages over optocouplers, including higher data rates, lower power consumption, and better reliability. The integrated DC-to-DC converter uses a push-pull architecture to generate isolated power, with an efficiency of up to 33% at full load. The device also includes a soft-start function to limit inrush current during power-up. Typical applications for the ADUM5411ARWZ-RL7 include isolated SPI interfaces, industrial field buses, medical equipment, and power supply control. Its high data rate and CMTI make it ideal for applications requiring robust communication in noisy environments. The integrated power converter simplifies the design of isolated power supplies, reducing component count and board area. When designing with this device, it is important to ensure proper PCB layout to minimize parasitic capacitance and maintain isolation performance. The input and output power supplies should be decoupled with appropriate capacitors, and the isolation barrier should be kept clear of copper traces to maintain the specified isolation voltage.

RFQ پەیوەندی
ADV3002XSTZ - 4:1 HDMI/DVI Switch | Analog Devices
ADV3002XSTZ

ADV3002XSTZ - 4:1 HDMI/DVI Switch | Analog Devices

Analog Devices ADV3002XSTZ is a 4:1 HDMI/DVI video switch with equalized TMDS inputs, bidirectional DDC and CEC buffering, and EDID replication, housed in an 80-lead LQFP package. The device is identified by Analog Devices as not recommended for new designs, making it primarily relevant to maintenance, repair, and previously released equipment. An HDMI/DVI video switch is an interface IC that routes one of several high-speed video sources to a display or downstream processing circuit. It belongs to the video-interface hierarchy within interface ICs. Unlike a general-purpose video processor, the ADV3002 primarily performs source selection while preserving the associated control-channel behavior. Equalized transition-minimized differential signaling inputs are intended for systems that include long cable runs, while DDC and CEC buffering supports the auxiliary connections used by compatible display devices. The principal feature set includes four selectable HDMI/DVI inputs, one switch output, equalization on the high-speed inputs, bidirectional buffering for the Display Data Channel and Consumer Electronics Control line, integrated CEC pull-up resistors, and EDID replication. The verified DigiKey listing describes the interface as I2C/serial and identifies HDMI 1.4a support. These functions consolidate several display-routing requirements into a single dedicated component. Technically, the ADV3002 is structured as a complete link-switch solution rather than a simple analog multiplexer. Equalization compensates for signal degradation over longer cable paths, while the DDC buffer helps maintain display-control communication through the selected path. EDID replication allows a display identity source to remain associated with the switched output, reducing the need to duplicate EEPROM hardware. Exact input bandwidth, propagation delay, channel count, and electrical limits require confirmation in the manufacturer datasheet. Typical implementations include HDTV equipment, projectors, set-top boxes, professional video systems, and other installations that route several HDMI or DVI sources to a common display. The equalized inputs are particularly relevant when source-to-switch cable length introduces signal-integrity concerns. In each case, system validation should cover the complete HDMI source, cable, sink, and control-channel combination rather than relying on switch status alone. Designers should account for the device's lifecycle recommendation and evaluate current program support before beginning a new platform. For an existing design, preserving the original 80-lead LQFP footprint, connector topology, control firmware, EDID arrangement, and cable assumptions is essential. New HDMI designs should normally use a currently recommended switching solution unless legacy compatibility makes ADV3002 operation unavoidable. This product record consolidates the manufacturer lifecycle position, functional capabilities, package information, ordering-code differences, and practical migration considerations for engineers evaluating the ADV3002XSTZ.

RFQ پەیوەندی
ADV3002XSTZ-RL - 4:1 HDMI/DVI Switch | Analog Devices
ADV3002XSTZ-RL

ADV3002XSTZ-RL - 4:1 HDMI/DVI Switch | Analog Devices

The Analog Devices ADV3002XSTZ-RL is a 4:1 HDMI/DVI switch with equalization, bidirectional DDC and CEC buffering, and EDID replication in an LQFP package. It is designed to route multiple high-definition audiovisual sources while supporting long cable runs and control-bus communication over the I2C interface. The device supports HDMI 1.4a signaling and is identified by Analog Devices as a video switch IC. An HDMI/DVI switch is a signal-routing integrated circuit that selects one of several video sources for a display or other HDMI-capable sink. Supporting equalized TMDS inputs helps preserve signal integrity when cables are longer than ideal. DDC buffering separates the display data channel, while CEC buffering allows consumer-control traffic to travel with the selected video path. These functions place the ADV3002 between source connectors and a downstream HDMI receiver. The principal feature of the ADV3002XSTZ-RL is its 4:1 switching ratio. A four-input architecture can consolidate several source devices into one display connection without requiring a separate external switch for each signal type. Integrated equalization addresses attenuation in longer cable runs, while the DDC and CEC buffers support control traffic associated with connected consumer-electronics equipment. EDID replication allows one EDID EEPROM to support the replicated display interface. The ADV3002 family also includes configurable input equalization, a feature intended to improve transition-minimized differential signaling performance across different cable lengths. The buffered DDC path is bidirectional, which allows source-side EDID information to be read by the connected display. The CEC line includes integrated pull-up resistors, reducing the need for external pull-up components in a correctly designed CEC interface. Typical uses include professional presentation systems, conference-room displays, digital-signage installations, video-conference equipment, and multi-source audiovisual racks. These systems benefit from centralized source selection, especially when computers, media players, and other sources feed a common large display. The device is also relevant to control-room and monitoring arrangements where long HDMI runs are common. Layout should preserve the high-speed TMDS and DDC signal paths, keep connector and protection-device stubs short, and follow the manufacturer’s recommended reference layout. Because the ADV3002 is not recommended for new designs, existing designs should first confirm whether a newer interface switch better matches the required input count, HDMI version, control functions, and lifecycle expectations. This page consolidates the documented functional characteristics, sourcing information, lifecycle caution, and engineering trade-offs of the ADV3002XSTZ-RL. It distinguishes confirmed switch, equalization, DDC, CEC, and EDID functions from parameters that require confirmation from the manufacturer datasheet before layout or qualification decisions are finalized.

RFQ پەیوەندی
ADV3200ASWZ - 300MHz 32x32 Crosspoint Switch | Analog Devices
ADV3200ASWZ

ADV3200ASWZ - 300MHz 32x32 Crosspoint Switch | Analog Devices

Analog Devices ADV3200ASWZ is a 300 MHz, 32 x 32 buffered analog crosspoint switch IC housed in a 176-lead LQFP exposed-pad package. The device provides a large, nonblocking switch array with unity gain, serial programming, selectable sync-tip clamp input, and a 2:1 on-screen-display insertion multiplexer for each output. It supports single 5 V, dual ±2.5 V, or dual ±3.3 V supply configurations according to the manufacturer product information. The 32 input and 32 output channels are intended for routing composite video signals in professional broadcast, studio, production, monitoring, and video-processing equipment. Its buffered outputs reduce loading sensitivity and help preserve signal integrity across the crosspoint matrix. A buffered analog crosspoint switch is a special-purpose routing IC within the broader signal-path and interface-IC hierarchy. Unlike a passive mechanical matrix, it provides electronically controlled connection paths, programmable routing, signal buffering, and optional clamp handling. The crosspoint architecture allows any supported input to be assigned to one or more outputs while keeping the switch matrix nonblocking. This makes the ADV3200 suitable for equipment requiring repeatable signal selection without relay wear or mechanical switching delay. Key features include the 32 x 32 nonblocking architecture, 300 MHz bandwidth, unity-gain buffered outputs, serial programming of the switch array, selectable sync-tip clamp input, and 2:1 OSD insertion per output. The high-impedance output-disable capability allows multiple devices to be connected with minimal interaction, providing a path for expanding channel count. Its exposed-pad package also provides a thermal and mechanical connection to the PCB when the device dissipates significant power. The ADV3200 uses an analog buffered matrix rather than a digital switching fabric. Buffered outputs help isolate downstream loads from the selected source and support predictable video routing, while the serial control interface reduces the number of external control lines. Designers should still treat high-frequency video routing as a controlled-impedance, grounding, decoupling, and return-path problem rather than relying on bandwidth alone. Typical uses include broadcast production switchers, video mixers, monitoring routers, studio signal distribution, professional video test equipment, and embedded video-routing systems. The device is particularly relevant when a system needs more routing flexibility than a fixed multiplexer can provide while retaining analog video compatibility. A critical layout consideration is the exposed thermal pad. The pad should be connected to the appropriate ground plane with short vias and uninterrupted copper, while keeping analog routing paths away from switching-node and digital return currents. Decoupling should be placed directly beside the relevant supply pins, and serial-control traces should be referenced to a quiet ground to avoid disturbing the video matrix. This product page consolidates verified manufacturer and distributor information, package identification, pricing context, application guidance, and replacement analysis. It distinguishes verified facts from unavailable detailed electrical, pin-level, compliance, and lifecycle data so engineers can make sourcing and design decisions without relying on guessed specifications.

RFQ پەیوەندی
ADV3202ASWZ - 300 MHz 32x16 Crosspoint Switch | Analog Devices
ADV3202ASWZ

ADV3202ASWZ - 300 MHz 32x16 Crosspoint Switch | Analog Devices

The Analog Devices ADV3202ASWZ is a 300 MHz, 32 × 16 buffered analog crosspoint switch packaged in a 176-lead LQFP with an exposed pad measuring 24 mm × 24 mm. It provides a large nonblocking analog switch array for routing baseband video and other wideband signals, with a selectable sync-tip clamp input for AC-coupled systems and a 2:1 on-screen-display insertion multiplexer on each output. An analog crosspoint switch is a multi-input, multi-output routing matrix that connects any eligible input to any selected output under control. Within the semiconductor hierarchy, it is a special-purpose analog switch, then an interface IC, and finally a signal-routing and video-processing device. Buffered crosspoints can provide lower source-to-output impedance than an unbuffered matrix, making them useful when the connected video network must drive downstream circuitry with consistent signal integrity. The key verified features of the ADV3202ASWZ are its 300 MHz operating bandwidth, 32 × 16 nonblocking switch array, buffered outputs, serial programming, selectable sync-tip clamp, and per-output 2:1 OSD insertion function. According to the manufacturer product page, the device can operate from a single +5 V supply or from dual ±2.5 V or dual ±3.3 V supplies when configured for the relevant gain option. The high-impedance output-disable feature permits multiple devices to share an output bus with reduced loading. Technically, the ADV3202 combines crosspoint routing with local video-source insertion rather than requiring a separate output multiplexer for every channel. Its serial control interface allows the routing table to be programmed by a control processor. The OSD inputs can add graphics or control information to a selected analog output, while the sync-tip clamp supports AC-coupled video sources by limiting the sync-tip level. These functions are intended to reduce the component count and board area in professional video routing equipment. Typical applications include analog video routing in broadcast and professional television systems, multimedia presentation equipment, video walls, security monitoring systems, and test equipment requiring configurable signal paths. Its 32 × 16 matrix can route a larger number of source channels than a simple multiplexer, while the 300 MHz bandwidth is suited to wideband baseband video rather than RF distribution. A critical design consideration is that this is a large, fine-pitch, 176-lead analog crosspoint rather than a simple logic switch. Board layout must preserve controlled-impedance analog routing, provide stable power and ground distribution, and account for exposed-pad thermal management. Signal paths must also remain short and symmetric to limit crosstalk and insertion loss. This page consolidates the verified manufacturer and distributor information with a package-focused comparison, drop-in family options, application guidance, and practical engineering notes. These synthesis elements help designers evaluate the ADV3202ASWZ beyond the basic distributor catalog description.

RFQ پەیوەندی
ADV3225ACPZ - 750 MHz 16x8 Analog Crosspoint | Analog Devices
ADV3225ACPZ

ADV3225ACPZ - 750 MHz 16x8 Analog Crosspoint | Analog Devices

The Analog Devices ADV3225ACPZ is a 750 MHz, 16 × 8 high-speed analog crosspoint switch with a −3 dB signal bandwidth greater than 750 MHz and a slew rate greater than 2500 V/µs. The device is packaged in a 72-lead LFCSP-VQ package measuring 10 mm × 10 mm. It combines buffered inputs, programmable high-impedance outputs, eight output amplifiers with a gain of +2, and nonblocking signal routing. An analog crosspoint switch is a semiconductor matrix that routes analog signals between multiple inputs and outputs. It belongs to the analog switch and multiplexer hierarchy, interface IC category, and broader signal-routing semiconductor family. Unlike a mechanical relay or multiplexer, the ADV3225ACPZ can maintain multiple signal paths concurrently, making it useful when a system requires flexible routing without interrupted paths during control changes. Key features include a 16 × 8 switch matrix, nonblocking operation, buffered inputs, programmable high-impedance outputs, and eight +2-gain output amplifiers. The crosspoint can drive 150 Ω loads and operates from ±5 V supplies. Its stated power consumption is 0.5 W. The combination of 750 MHz bandwidth and greater than 2500 V/µs slew rate supports high-frequency analog signals whose fidelity must be preserved through routing. The ADV3225ACPZ is positioned as a pinout-compatible and functionally equivalent alternative to the AD8110 and AD8111 families. The manufacturer also identifies compatibility with the ADV3228 and ADV3229 8 × 8 arrays. This makes the device relevant to broadcast, video-routing, telecommunications, and test-equipment designs in which a compact, high-speed analog routing matrix is required. Its buffered architecture allows external signals to be routed without placing additional gain stages at every destination. Typical applications include video production and broadcast routing, telecommunications line and channel routing, multimedia distribution, A/V equipment, and high-speed test systems. Eight independently controllable output amplifiers can provide fixed +2 gain, while programmable output high-impedance states support parallel crosspoint outputs when higher output drive is required. The 16 × 8 architecture offers more source choices than the related 8 × 8 devices. The primary design consideration is the ±5 V supply requirement and the need to preserve high-frequency signal integrity. Supply decoupling should be placed close to the device, and routing should minimize trace lengths and discontinuities on this bandwidth demanding package. Designers should also review output loading and control sequencing because the 150 Ω load capability and parallel-output behavior are central to maintaining signal amplitude and bandwidth. This page combines the manufacturer's matrix architecture and AC-performance specifications with practical routing, decoupling, and output-loading guidance. It also distinguishes the ADV3225 from related gain and matrix-size options and explains the verified compatibility paths for legacy AD8110 and AD8111 designs.

RFQ پەیوەندی
ADV7160KS140 - 220MHz True-Color Video RAM-DAC | Analog Devices
ADV7160KS140

ADV7160KS140 - 220MHz True-Color Video RAM-DAC | Analog Devices

The Analog Devices ADV7160KS140 is a 96-bit, 220 MHz true-color video RAM-DAC with triple 10-bit gamma-correcting DACs, a hardware cursor, and an integrated PLL, supplied in a 160-lead MQFP package. It combines a 96-bit pixel interface with 24-bit true-color output and supports 30-bit gamma-corrected operation for graphics workstations and windows accelerators. A video RAM-DAC is a graphics-interface semiconductor that converts digital pixel and palette information into analog red, green, and blue video signals. In the broader hierarchy, it belongs to the video interface IC and display-processing categories, bridging a digital graphics subsystem and analog RGB display hardware. The ADV7160KS140 is intended for high-performance color graphics systems where direct digital rendering must be converted into analog video outputs. The principal features include three 10-bit DAC channels, a 96-bit pixel port, 220 MHz operation, a user-definable hardware cursor, and a triple-by-30 color palette RAM. Its 30-bit gamma-corrected capability provides additional headroom for display color processing, while the specified DAC-to-DAC color matching limit of 2% maximum supports consistent output among the red, green, and blue channels. The device includes an on-chip phase-locked loop for pixel-clock-related implementation and a 64-by-64 hardware cursor. These resources reduce the external circuitry and software overhead normally required by a discrete graphics-output design. The 160-lead MQFP package provides numerous pixel-port, synchronization, analog-output, control, and supply connections needed for a parallel graphics subsystem. Typical applications include graphics subsystems in color workstations, windows accelerators, industrial display controllers, professional video equipment, and legacy digital-display systems. The parallel 96-bit pixel port is particularly suitable where high aggregate pixel bandwidth is required and the source controller can drive the interface at the supported clock rate. When laying out a new design, verify every signal against the ADV7160/ADV7162 datasheet pin-description table and preserve the analog-output routing and grounding recommendations. Confirm the selected ADV7160 speed grade, supply sequencing, clock jitter tolerance, and output-load assumptions before releasing PCB artwork or treating another family member as a replacement. This product record combines the manufacturer's architecture description with package, interface, DAC, cursor, and application details, while adding practical design guidance, sourcing information, and a structured same-family replacement comparison for faster engineering evaluation.

RFQ پەیوەندی
ADV7171KSUZ - 10-Bit PAL/NTSC Video Encoder | Analog Devices
ADV7171KSUZ

ADV7171KSUZ - 10-Bit PAL/NTSC Video Encoder | Analog Devices

The Analog Devices ADV7171KSUZ is a 10-bit digital PAL/NTSC video encoder that converts CCIR-601 4:2:2 component-video data into standard analog baseband television signals. It accepts 8-bit or 16-bit parallel input, operates from a 4.75 V to 5.25 V supply, and is packaged in a 44-lead TQFP measuring 10 mm by 10 mm. A digital video encoder is an interface IC that bridges digital video-processing systems and legacy analog displays. In the signal hierarchy, it converts buffered YCrCb component data into composite video, S-Video, or RGB output. This makes the device applicable to DVD playback equipment, portable video products, laptop PCs, video games, multimedia computers, set-top boxes, and satellite or cable receiver systems. The ADV7171KSUZ family provides 10-bit internal digital-to-analog conversion, simultaneous composite and S-Video or RGB output, and programmable operating modes through a two-wire serial interface. The control port is compatible with I2C-style communication and supports two slave addresses, allowing an external controller to select output modes and configure the encoder. These features provide a practical interface between digital video pipelines and PAL or NTSC-compatible analog equipment. Advanced power management is a defining feature of the ADV7170 and ADV7171 family. The manufacturer describes the devices as integrated digital PAL/NTSC encoders with 10-bit SSAF and advanced power-management circuitry. Their interface is designed for systems where power consumption, programmable output behavior, and compatibility with established video-control buses are important. Typical deployments include high-performance DVD players, portable and laptop video systems, PC video and multimedia platforms, game consoles, set-top boxes, and satellite or cable receiver equipment. The 44-lead TQFP package provides a surface-mount solution for equipment requiring multiple analog video outputs and extensive control connectivity. A key design consideration is that the encoder operates from a nominal 5 V supply. The power rails must remain within 4.75 V to 5.25 V, and the analog video output network must be implemented according to the manufacturer’s reference application. Verify timing, output-mode configuration, and signal amplitudes against the device datasheet before releasing a PCB. This page consolidates the manufacturer’s encoder capabilities, package information, operating limits, source documents, application guidance, and qualified drop-in alternatives into a design-focused reference for engineers maintaining or creating PAL/NTSC video systems.

RFQ پەیوەندی
ADV7171KSUZ-REEL - 10-Bit PAL/NTSC Video Encoder | Analog Devices (Tape & Reel)
ADV7171KSUZ-REEL

ADV7171KSUZ-REEL - 10-Bit PAL/NTSC Video Encoder | Analog Devices (Tape & Reel)

The Analog Devices ADV7171KSUZ-REEL is a 10-bit digital PAL/NTSC video encoder that converts CCIR-601 4:2:2 component-video data into standard analog baseband television signals. It accepts 8-bit or 16-bit parallel input, operates from a 4.75 V to 5.25 V supply, and is packaged in a 44-lead TQFP measuring 10 mm by 10 mm. A digital video encoder is an interface IC that bridges digital video-processing systems and legacy analog displays. In the signal hierarchy, it converts buffered YCrCb component data into composite video, S-Video, or RGB output. This makes the device applicable to DVD playback equipment, portable video products, laptop PCs, video games, multimedia computers, set-top boxes, and satellite or cable receiver systems. The ADV7171KSUZ-REEL family provides 10-bit internal digital-to-analog conversion, simultaneous composite and S-Video or RGB output, and programmable operating modes through a two-wire serial interface. The control port is compatible with I2C-style communication and supports two slave addresses, allowing an external controller to select output modes and configure the encoder. These features provide a practical interface between digital video pipelines and PAL or NTSC-compatible analog equipment. Advanced power management is a defining feature of the ADV7170 and ADV7171 family. The manufacturer describes the devices as integrated digital PAL/NTSC encoders with 10-bit SSAF and advanced power-management circuitry. Their interface is designed for systems where power consumption, programmable output behavior, and compatibility with established video-control buses are important. Typical deployments include high-performance DVD players, portable and laptop video systems, PC video and multimedia platforms, game consoles, set-top boxes, and satellite or cable receiver equipment. The 44-lead TQFP package provides a surface-mount solution for equipment requiring multiple analog video outputs and extensive control connectivity. A key design consideration is that the encoder operates from a nominal 5 V supply. The power rails must remain within 4.75 V to 5.25 V, and the analog video output network must be implemented according to the manufacturer’s reference application. Verify timing, output-mode configuration, and signal amplitudes against the device datasheet before releasing a PCB. This page consolidates the manufacturer’s encoder capabilities, package information, operating limits, source documents, application guidance, and qualified drop-in alternatives into a design-focused reference for engineers maintaining or creating PAL/NTSC video systems.

RFQ پەیوەندی
ADV7177KSZ - 3-Channel 9-Bit Video Encoder | Analog Devices
ADV7177KSZ

ADV7177KSZ - 3-Channel 9-Bit Video Encoder | Analog Devices

The Analog Devices ADV7177KSZ is a 3-channel, 9-bit digital video encoder with analog composite video outputs, a 3 V to 3.6 V supply range, and a 44-pin MQFP package measuring 10 mm by 10 mm. It accepts digital ITU-R BT.601/BT.656 YCrCb input and supports PAL and NTSC encoding, including NTSC-M and multiple PAL variants. A video encoder is an interface IC that converts digital pixel data into legacy analog television signals. In the broader signal-chain hierarchy, it sits between a digital video processor and an external display or broadcast system. The ADV7177KSZ integrates three 9-bit video DACs with encoding circuitry, allowing three independently addressed video outputs to be served from one device. The verified feature data identifies 9-bit DAC resolution with integral nonlinearity below 1 LSB, digital input, analog output, and operation from 3 V to 3.6 V. Its commercial temperature range is 0°C to +70°C. A single 27 MHz clock reference is listed in the available source material, providing the timing foundation for the digital input and encoded analog outputs. The 44-MQFP package supports compact surface-mount integration. Technically, the device belongs to the video encoder and DAC conversion category rather than a general-purpose processor. Its YCrCb input simplifies connection to digital video pipelines using ITU-R BT.601/BT.656 formatting. Three integrated DAC channels reduce the need for separate output converters when a design requires several encoded video signals, although external synchronization, termination, and connector details must follow the complete manufacturer documentation. Typical uses include set-top box video outputs, television and monitor interfaces, digital video processing equipment, and legacy PAL or NTSC test systems. The ADV7177KSZ is most appropriate when the system already produces compatible YCrCb digital video and still needs three analog outputs. It is less suitable for designs requiring modern digital display interfaces such as HDMI or DisplayPort. Designers should verify clock timing, input mapping, DAC output levels, and package pin assignments in the manufacturer datasheet before layout release. Proper analog-output routing, ground-return management, and supply decoupling are important because encoded composite video quality can be affected by noise and return-path discontinuity. This page consolidates verified distributor specifications, package details, sourcing information, and engineering-oriented application guidance. It distinguishes documented capabilities from missing data and avoids presenting unverified pricing, pin mappings, or lifecycle claims as established facts.

RFQ پەیوەندی
ADV7177KSZ-REEL - 3-Channel 9-Bit Video Encoder | Analog Devices (Tape & Reel)
ADV7177KSZ-REEL

ADV7177KSZ-REEL - 3-Channel 9-Bit Video Encoder | Analog Devices (Tape & Reel)

The Analog Devices ADV7177KSZ-REEL is a 3-channel, 9-bit digital video encoder with analog composite video outputs, a 3 V to 3.6 V supply range, and a 44-pin MQFP package measuring 10 mm by 10 mm. It accepts digital ITU-R BT.601/BT.656 YCrCb input and supports PAL and NTSC encoding, including NTSC-M and multiple PAL variants. A video encoder is an interface IC that converts digital pixel data into legacy analog television signals. In the broader signal-chain hierarchy, it sits between a digital video processor and an external display or broadcast system. The ADV7177KSZ-REEL integrates three 9-bit video DACs with encoding circuitry, allowing three independently addressed video outputs to be served from one device. The verified feature data identifies 9-bit DAC resolution with integral nonlinearity below 1 LSB, digital input, analog output, and operation from 3 V to 3.6 V. Its commercial temperature range is 0°C to +70°C. A single 27 MHz clock reference is listed in the available source material, providing the timing foundation for the digital input and encoded analog outputs. The 44-MQFP package supports compact surface-mount integration. Technically, the device belongs to the video encoder and DAC conversion category rather than a general-purpose processor. Its YCrCb input simplifies connection to digital video pipelines using ITU-R BT.601/BT.656 formatting. Three integrated DAC channels reduce the need for separate output converters when a design requires several encoded video signals, although external synchronization, termination, and connector details must follow the complete manufacturer documentation. Typical uses include set-top box video outputs, television and monitor interfaces, digital video processing equipment, and legacy PAL or NTSC test systems. The ADV7177KSZ-REEL is most appropriate when the system already produces compatible YCrCb digital video and still needs three analog outputs. It is less suitable for designs requiring modern digital display interfaces such as HDMI or DisplayPort. Designers should verify clock timing, input mapping, DAC output levels, and package pin assignments in the manufacturer datasheet before layout release. Proper analog-output routing, ground-return management, and supply decoupling are important because encoded composite video quality can be affected by noise and return-path discontinuity. This page consolidates verified distributor specifications, package details, sourcing information, and engineering-oriented application guidance. It distinguishes documented capabilities from missing data and avoids presenting unverified pricing, pin mappings, or lifecycle claims as established facts.

RFQ پەیوەندی
ADV7179KCPZ - 10-Bit PAL/NTSC Video Encoder | Analog Devices
ADV7179KCPZ

ADV7179KCPZ - 10-Bit PAL/NTSC Video Encoder | Analog Devices

The Analog Devices ADV7179KCPZ is a single-chip digital video encoder that converts digital CCIR-601 4:2:2 8-bit component video into standard analog PAL or NTSC baseband signals. The device uses three 10-bit DACs and includes a 40-lead, 6 mm × 6 mm LFCSP package. Its 2-wire serial interface is compatible with I2C and supports two slave addresses for configuration and mode selection. A video encoder is an interface and signal-conversion IC positioned between digital video sources and analog display systems. It accepts digital luminance and chrominance data, applies the timing and encoding required for composite video, and produces analog television outputs. In the product hierarchy, the ADV7179KCPZ is an analog video encoder, interface IC, signal-conversion IC, and semiconductor. The principal features include ITU-R BT.601/BT.656 YCrCb input support, conversion to PAL or NTSC video, three integrated 10-bit DACs, and 2-wire serial control. The two available slave addresses allow the host processor to distinguish or access the ADV7174 and ADV7179 operating modes. Analog Devices identifies the encoder for digital-camera, mobile-phone, and portable-video applications. Internally, the encoder accepts digital YCrCb component data derived from a digital video source and generates analog baseband television signals compatible with worldwide television standards. Integrating three DACs reduces the number of external video-output conversion stages required in a compact design. The 40-pin exposed-pad LFCSP also supports improved heat dissipation when its exposed pad and PCB land pattern are implemented correctly. Typical uses include composite-video output for security cameras, camera modules, portable media equipment, and mobile-phone accessories. It can also be evaluated in industrial imaging and legacy video-conversion equipment when the system must generate PAL or NTSC output from a digital YCrCb source. The I2C-compatible control path simplifies configuration in designs that already include a digital video controller. Designers should verify the exact pin names, exposed-pad connection, analog output impedance, external network requirements, and supply sequencing against the manufacturer datasheet before layout release. Because the ADV7179 family is marked “NOT RECOMMENDED FOR NEW DESIGNS,” long-life products should normally use a currently recommended encoder unless an existing platform requires its established function and interface. This page combines the exact package and product identifiers, lifecycle position, functional characteristics, application guidance, and verified sourcing context for the ADV7179KCPZ. It also distinguishes confirmed device facts from specifications that require the manufacturer datasheet before schematic or PCB sign-off.

RFQ پەیوەندی
ADV7179KCPZ-REEL - 10-Bit PAL/NTSC Video Encoder | Analog Devices (Tape & Reel)
ADV7179KCPZ-REEL

ADV7179KCPZ-REEL - 10-Bit PAL/NTSC Video Encoder | Analog Devices (Tape & Reel)

The Analog Devices ADV7179KCPZ-REEL is a single-chip digital video encoder that converts digital CCIR-601 4:2:2 8-bit component video into standard analog PAL or NTSC baseband signals. The device uses three 10-bit DACs and includes a 40-lead, 6 mm × 6 mm LFCSP package. Its 2-wire serial interface is compatible with I2C and supports two slave addresses for configuration and mode selection. A video encoder is an interface and signal-conversion IC positioned between digital video sources and analog display systems. It accepts digital luminance and chrominance data, applies the timing and encoding required for composite video, and produces analog television outputs. In the product hierarchy, the ADV7179KCPZ-REEL is an analog video encoder, interface IC, signal-conversion IC, and semiconductor. The principal features include ITU-R BT.601/BT.656 YCrCb input support, conversion to PAL or NTSC video, three integrated 10-bit DACs, and 2-wire serial control. The two available slave addresses allow the host processor to distinguish or access the ADV7174 and ADV7179 operating modes. Analog Devices identifies the encoder for digital-camera, mobile-phone, and portable-video applications. Internally, the encoder accepts digital YCrCb component data derived from a digital video source and generates analog baseband television signals compatible with worldwide television standards. Integrating three DACs reduces the number of external video-output conversion stages required in a compact design. The 40-pin exposed-pad LFCSP also supports improved heat dissipation when its exposed pad and PCB land pattern are implemented correctly. Typical uses include composite-video output for security cameras, camera modules, portable media equipment, and mobile-phone accessories. It can also be evaluated in industrial imaging and legacy video-conversion equipment when the system must generate PAL or NTSC output from a digital YCrCb source. The I2C-compatible control path simplifies configuration in designs that already include a digital video controller. Designers should verify the exact pin names, exposed-pad connection, analog output impedance, external network requirements, and supply sequencing against the manufacturer datasheet before layout release. Because the ADV7179 family is marked “NOT RECOMMENDED FOR NEW DESIGNS,” long-life products should normally use a currently recommended encoder unless an existing platform requires its established function and interface. This page combines the exact package and product identifiers, lifecycle position, functional characteristics, application guidance, and verified sourcing context for the ADV7179KCPZ-REEL. It also distinguishes confirmed device facts from specifications that require the manufacturer datasheet before schematic or PCB sign-off.

RFQ پەیوەندی
ADV7179WBCPZ - 10-Bit NTSC/PAL Video Encoder | Analog Devices
ADV7179WBCPZ

ADV7179WBCPZ - 10-Bit NTSC/PAL Video Encoder | Analog Devices

Analog Devices ADV7179WBCPZ is a chip-scale NTSC/PAL video encoder with three 10-bit video DACs, SSAFTM filtering, advanced power management, and a 40-LFCSP-WQ 6 x 6 mm package with an exposed pad. It converts ITU-R BT.601/BT.656 YCrCb digital video into composite PAL or NTSC analog video, with 80 dB video SNR and support for a single 27 MHz clock at 2x oversampling. A video encoder is an interface IC that converts digitally generated image data into a legacy analog video signal suitable for displays, capture equipment, and broadcast-related systems. Within the product hierarchy, the ADV7179 belongs to video interface and encoder ICs, combining digital timing and color processing with three analog video output channels. It also accepts optional synchronization signals and can generate WSS and CGMS-A control information. Key features include three high-quality 10-bit video DACs, a Super Sub-Alias Filter for improved signal quality, and support for NTSC M, PAL N2, PAL B/D/G/H/I, PAL M3, and PAL 60. The encoder can use ITU-R BT.601/BT.656 YCrCb input data, while the advanced power-management functions are useful in portable systems where power consumption and shutdown behavior affect battery life. The ADV7179 uses a 32-bit direct digital video-processing architecture and derives its operating reference from one 27 MHz clock. According to the Analog Devices ADV7179 datasheet, Rev. D, the device achieves 80 dB video SNR. Optional HSYNC, VSYNC, and FIELD timing signals support master-mode timing adjustments for pulse width and position, providing integration flexibility when the encoder must work with external synchronization sources. Typical uses include digital camera and portable-video signal paths, CCTV and surveillance capture equipment, industrial vision systems, and legacy analog-video interfaces for embedded processors. Its three analog outputs suit systems requiring multiple encoded channels or separate video and auxiliary outputs, while WSS and CGMS-A generation supports wide-screen signaling and copy-management workflows. Designers should preserve the recommended clock and video-data timing, connect the exposed thermal pad according to the package land pattern, and keep analog video routing short and away from high-speed digital clocks. Because the part is not recommended for new designs, engineers should also evaluate lifecycle constraints early and request the current sourcing position before committing new production volumes. This page combines the manufacturer-defined lifecycle position, package information, encoding standards, interface features, and practical application guidance. It also distinguishes verified device capabilities from procurement details that require a direct quotation, helping engineers evaluate fit, timing, thermal handling, and supply risk before integrating the ADV7179WBCPZ.

RFQ پەیوەندی
ADV7181DBCPZ - 10-Bit Multiformat Video Decoder | Analog Devices
ADV7181DBCPZ

ADV7181DBCPZ - 10-Bit Multiformat Video Decoder | Analog Devices

The Analog Devices ADV7181DBCPZ is a 10-bit, single-chip multiformat video decoder and graphics digitizer that converts PAL, NTSC, and SECAM composite or S-Video signals into digital ITU-R BT.656 output. It also accepts component RGB or YPrPb video and is packaged in a 64-lead LFCSP-VQ (9 x 9 mm) package with four video ADCs. A video decoder is an interface IC that digitizes legacy analog baseband television and graphics signals so downstream logic, image processors, or display controllers can process them digitally. In the product hierarchy, the ADV7181DBCPZ is a video decoder, a specialized interface IC, and ultimately a semiconductor for analog-to-digital video conversion. Its multiformat input support allows one design to cover several regional television standards without separate decoder circuits for each format. The device provides 10-bit video decoding and four ADCs, covering composite, S-Video, and component inputs. Digital output uses the ITU-R BT.656 format, which provides a straightforward parallel interface to downstream processors. The 64-LFCSP-VQ package is a surface-mount leadless chip-scale package that supports dense camera, capture, broadcast, and industrial vision designs where analog input conditioning and digital conversion must coexist in a compact area. Analog Devices positions the ADV7181D as a high-quality decoder and graphics digitizer with automatic handling of world television standards. According to the Analog Devices ADV7181D datasheet, the device is suitable for lead-free applications and can withstand surface-mount soldering at up to 255°C +/- 5°C. It is also compatible with conventional tin/lead solder-paste reflow at 220°C to 235°C, supporting both modern lead-free and legacy assembly processes. Typical uses include analog CCTV and surveillance camera front ends, broadcast and professional video capture equipment, industrial machine-vision cameras, and video-in-a-PC designs. In these systems, the decoder converts incoming composite, S-Video, or component video into a digital stream that can be scaled, encoded, recorded, or displayed. The main design consideration is analog signal integrity. Impedance-controlled routing, short traces between the analog inputs and the decoder, solid grounding, and carefully placed bypass capacitors are essential for limiting reflection and crosstalk. The exposed thermal pad also requires a deliberate ground-plane and via pattern so heat can leave the package without disturbing sensitive analog returns. This page organizes the manufacturer specifications, supported video formats, package information, drop-in alternatives, and application guidance into one engineering reference. It also provides practical PCB, soldering, and signal-integrity notes that help shorten evaluation and board bring-up for designers integrating a multiformat analog video front end.

RFQ پەیوەندی
ADV7186BBCZ - Multiformat Video Decoder with LVDS | Analog Devices
ADV7186BBCZ

ADV7186BBCZ - Multiformat Video Decoder with LVDS | Analog Devices

Analog Devices ADV7186BBCZ is a high-performance, single-chip multiformat video decoder and processor with integrated LVDS transmitter and receiver. It digitizes analog video signals through a single high-speed 10-bit ADC and supports NTSC, PAL, and SECAM standards. The device is packaged in a 196-terminal CSPBGA (12 x 12 mm) package. Its digital output architecture includes a flexible 24-bit pixel output interface, an independent BT.656 output channel, and an LVDS transmitter using OpenLDI mapping. The ADV7186BBCZ also includes an LCD controller with timing control and PWM backlight control, while the LVDS receiver is available specifically on the ADV7186BBCZ and ADV7186BBCZ-T versions. A video decoder is an interface IC that converts composite or component analog video into digital pixel data for display, capture, conversion, or processing systems. In the broader electronics hierarchy, this video decoder belongs to interface ICs, video signal-processing ICs, and ultimately the semiconductor category. The conversion stage is particularly important in industrial displays, broadcast equipment, security systems, and consumer electronics where legacy analog signals must be connected to digital LCD or embedded processing platforms. Key features include support for three major analog television formats, integrated 10-bit analog-to-digital conversion, simultaneous-looking LVDS transmit and receive capability, and multiple digital output paths. The independent BT.656 channel provides a separate digital video output, while the 24-bit pixel interface offers flexibility for system-level timing and data organization. The LCD controller supports panel timing and PWM backlight control, reducing the need for additional discrete timing-control circuitry in suitable display designs. The ADV7186BBCZ is designed for multiformat analog-video front ends and LCD panel interfaces. Its integration is valuable when a design must accept NTSC, PAL, or SECAM input while presenting a digital signal to an LCD panel or downstream image processor. The package is a CSPBGA with 196 terminals, so PCB layout must use the manufacturer’s recommended land pattern and escape-routing guidance. The LVDS receiver and transmitter availability makes the device relevant to systems that need both analog-video decoding and panel-link connectivity. Typical applications include industrial panel computers, broadcast and professional video equipment, security and surveillance displays, automotive infotainment prototypes, medical display interfaces, and custom LCD control systems. When evaluating the part, confirm the required analog input topology, supported video timing, LVDS channel requirements, external memory configuration, and panel interface before finalizing the PCB. A key design consideration is that the ADV7186BBCZ is a complex mixed-signal and high-speed digital device. Keep analog inputs short and controlled, route LVDS pairs as impedance-matched differential nets, and follow the manufacturer’s recommended power and ground-plane arrangement. Because the integrated LCD timing and backlight functions can simplify a display design, they can also constrain replacement decisions when a substitute changes the LVDS, TCON, or external-SDRAM functions. This page combines the manufacturer’s product information, verified distributor identification, and practical interface considerations for engineers evaluating the ADV7186BBCZ.

RFQ پەیوەندی
ADV7280BCPZ-M-RL - 8-Input SDTV Video Decoder | ADI
ADV7280BCPZ-M-RL

ADV7280BCPZ-M-RL - 8-Input SDTV Video Decoder | ADI

Analog Devices ADV7280BCPZ-M-RL is an 8-input oversampled SDTV video decoder with deinterlacing, I2P conversion, and an 8-bit YCrCb 4:2:2 output interface in a 32-LFCSP package. It supports eight single-ended analog inputs, accepts NTSC, PAL, and SECAM baseband video, and is fabricated in a 1.8 V CMOS process. An oversampled video decoder is an interface IC that converts multiple analog baseband video formats into digital component data for processing or display. The ADV7280 belongs to the video decoder hierarchy within interface ICs and semiconductor signal-processing devices. Its composite, S-Video, and component-video support consolidates several legacy analog sources into a digital pipeline while reducing the number of discrete signal-processing components required by an embedded system. Key features include support for eight analog inputs, automatic detection of worldwide NTSC, PAL, and SECAM signals, 10-bit decoding, oversampling, deinterlacing, and I2P conversion. The decoder outputs an 8-bit YCrCb 4:2:2 stream through a MIPI CSI-2 serial interface. Configuration is handled through a two-wire, serial, bidirectional serial port compatible with I2C. Its monolithic 1.8 V CMOS construction supports lower power dissipation while integrating decoding and deinterlacing functions. The ADV7280-M architecture is intended for space-constrained portable and embedded video equipment. Eight single-ended inputs allow the device to serve multiple camera, composite-video, S-Video, or component sources without duplicating the decoder function. MIPI CSI-2 output carries the decoded YCrCb data to a host processor, digital signal processor, display controller, or image-processing pipeline. The separate ADV7280 family member supports four inputs, making the ADV7280-M the higher-channel-count option. Typical uses include automotive infotainment, vehicle camera systems, industrial inspection equipment, portable media devices, security cameras, video capture systems, and industrial control panels. The 32-LFCSP package is suitable for compact mixed-signal layouts, but exposed-pad thermal management and careful routing of analog inputs, digital supply rails, and the MIPI interface are essential. The manufacturer describes the package as an LFCSP option for space-constrained portable applications. For implementation, follow the pin-description table and reference layout in the Analog Devices ADV7280 datasheet. Keep analog video traces short, controlled-impedance connections stable, and switching supplies away from sensitive video inputs. Use the exposed pad as a thermal and low-impedance ground connection according to the manufacturer's layout guidance. Verify the required I2C address, deinterlacing mode, output timing, and I2P configuration in firmware before production release. This product page combines manufacturer-function details, interface-family distinctions, replacement guidance, and application-oriented engineering guidance. It also identifies where application-specific resources such as pin assignments, register behavior, timing limits, and package drawings should be confirmed in the official documentation.

RFQ پەیوەندی
ADV7280KCPZ - 10-Bit SDTV Video Decoder | Analog Devices
ADV7280KCPZ

ADV7280KCPZ - 10-Bit SDTV Video Decoder | Analog Devices

The Analog Devices ADV7280KCPZ is a 10-bit, 4-oversampled SDTV video decoder with deinterlacing, packaged in a 32-lead LFCSP (5 mm x 5 mm) surface-mount package. It automatically identifies analog baseband video formats, including composite, S-Video, and component YPbPr inputs compatible with NTSC, PAL, and SECAM standards. The device also supports digital video input and outputs decoded video through a serial 10-bit parallel interface for integration with digital video processors. A video decoder converts analog baseband video into a digital pixel stream that a digital signal processor, display controller, capture engine, or video recorder can process. The ADV7280 belongs to the video decoder hierarchy within interface ICs, where analog front-end acquisition, color and timing recovery, deinterlacing, and digital output conversion are combined in one device. This integration reduces the number of discrete components required around an analog video input connector. The ADV7280KCPZ uses a 10-bit ADC and four-times oversampling architecture to support SDTV signal acquisition. Its multiformat detection simplifies system configuration because the same decoder can handle NTSC, PAL, and SECAM sources without fixed user-programmed timing for each standard. An integrated deinterlacer supports progressive conversion of interlaced source material for display and processing pipelines. The serial output interface is identified as 10-bit I2C and serial in distributor catalogs, while the device also includes a parallel digital output path for pixel data. Analog Devices positions the ADV7280 family for professional and industrial video equipment, including broadcast and surveillance systems, security cameras, video processors, multimedia equipment, and industrial monitoring installations. The multiformat input architecture is particularly useful where equipment must accept composite or S-Video from sources with different television standards. A single decoder implementation can therefore cover multi-region deployments without changing the hardware. The LFCSP-32 package makes the ADV7280KCPZ appropriate for space-constrained designs, but its exposed-pad construction requires careful PCB layout. Analog video inputs should be routed away from high-speed digital signals, and the device must be placed close to its input connector to minimize susceptibility to noise and interference. The analog and digital ground domains should follow the grounding and decoupling recommendations in the manufacturer datasheet. This page organizes the product specifications, drop-in alternatives, application guidance, and practical layout considerations into a single engineering reference. It also distinguishes the standard ADV7280KCPZ from related family members so engineers can evaluate package, temperature-grade, and functional differences before approving a substitution.

RFQ پەیوەندی
ADV7283WBCPZ - 10-Bit Video Decoder | Analog Devices
ADV7283WBCPZ

ADV7283WBCPZ - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7283WBCPZ is a one-chip, multiformat analog video decoder with a 10-bit output interface, differential video inputs, and an integrated deinterlacer in a 32-LFCSP surface-mount package. According to the Analog Devices manufacturer datasheet, it detects worldwide NTSC, PAL, and SECAM analog baseband signals supplied as composite, S-Video, or component video. The decoder converts these analog signals into a YCrCb 4:2:2 digital stream compatible with the 8-bit ITU-R BT.656 interface. An analog video decoder is an interface IC that recovers standardized digital pixels from legacy composite, S-Video, or component video signals. Within the signal-chain hierarchy, the ADV7283 belongs to video interface ICs and ultimately to broader interface and signal-processing semiconductors. Its role is particularly important when industrial imaging, broadcast, surveillance, or legacy audiovisual equipment must retain analog video connections while passing uncompressed digital video to an FPGA, ASIC, image processor, or display controller. The manufacturer identifies several headline features, including automatic NTSC, PAL, and SECAM detection, 10-bit digital video output, differential inputs, a deinterlacer, and an I2C-compatible control interface. The ADV7283 is fabricated using a 1.8 V CMOS process and is programmed through a two-wire, serial, bidirectional interface. Its digital output follows ITU-R BT.656 and includes a line-locked clock alongside the eight parallel video data pins identified in the datasheet description. The 32-LFCSP package supports compact surface-mount layouts while providing dedicated analog input, digital output, clock, control, diagnostic, and power connections. Differential input routing can reduce sensitivity to ground noise and common-mode interference when the board layout, input termination, and source impedance are controlled correctly. The parallel YCrCb 4:2:2 architecture offers a straightforward interface to devices that accept 8-bit ITU-R BT.656 video, but the host processor must still support the required pixel clocking and data timing. Typical uses include professional broadcast equipment, industrial video capture, security cameras, video walls, multimedia systems, and legacy AV installations. The decoder is particularly appropriate when a system accepts several analog video standards but the downstream processor requires a deterministic digital pixel stream. A design should verify the Analog Devices hardware reference manual for diagnostic functions and detailed register behavior before finalizing signal timing. Layout is the primary practical consideration. Route the composite, S-Video, or component inputs away from digital clock and data traces, maintain the recommended input network, and place decoupling capacitors close to the supply pins. Differential inputs require matched geometry and careful return-path design. Confirm analog signal amplitude, synchronization polarity, I2C addresses, clock relationships, and unused-pin treatment against the manufacturer documentation before fabrication. This page combines the verified manufacturer functionality, package information, interface details, pricing availability fields, and application guidance into an engineering-focused view of the ADV7283WBCPZ. It also identifies the distinction between a genuine pin-compatible substitute and a merely related video-decoder or reel-code variant, helping designers avoid assumptions that could require a PCB revision.

RFQ پەیوەندی
ADV7305AKST - 6-Channel 14-Bit Video Encoder | Analog Devices
ADV7305AKST

ADV7305AKST - 6-Channel 14-Bit Video Encoder | Analog Devices

The Analog Devices ADV7305AKST is a multiformat video encoder with six 14-bit NSV digital-to-analog converters, designed for SD, progressive-scan, and HDTV video signal generation. The device combines digital video processing with six DAC outputs in a 64-lead LQFP surface-mount package. A video encoder is a signal-conversion integrated circuit that accepts digital video data and produces analog video outputs suitable for downstream display, broadcast, or video-processing equipment. In the broader signal-chain hierarchy, the ADV7305AKST combines a video encoder with digital-to-analog conversion, placing it between digital video sources and analog video outputs. The principal features of the ADV7305AKST are its multiformat SD and progressive-scan or HDTV support, six integrated 14-bit DAC channels, and 14-bit video encoding capability. The six DACs allow a design to produce multiple analog video outputs without requiring separate external converter packages. The part also supports both analog and digital supply rails identified as 2.5 V. The device is intended for DVD, SD, and HD video equipment, including multiformat video generation systems. Its integrated six-channel DAC architecture simplifies analog-output implementation by keeping encoding and conversion within one package. The 64-LQFP package is intended for surface-mount assembly and provides a clearly defined board-level footprint for equipment with multiple video outputs. Typical applications include SD video encoding, progressive-scan video generation, HDTV signal generation, DVD-related video systems, and professional or industrial video equipment requiring several analog outputs. The ADV7305AKST is particularly relevant when the source subsystem already produces digital video and the destination equipment expects multiple analog video signals. PCB implementation should account for the device's multi-output analog architecture and the need to route video signals away from sensitive digital paths. Use the manufacturer's pin-description table when assigning connector and routing-related pins, and follow the analog and digital grounding recommendations in the ADV7305AKST datasheet. Power decoupling should follow the datasheet's recommended network for both 2.5 V analog and digital supplies. This page organizes the ADV7305AKST's encoder and DAC functions, package information, application roles, and design considerations into a practical engineering reference. It also distinguishes verified device facts from optional same-footprint selection criteria, helping engineers assess replacements without confusing shared packaging with guaranteed electrical equivalence.

RFQ پەیوەندی
ADV7321KSTZ - 216MHz Multiformat HD Video Encoder | Analog Devices
ADV7321KSTZ

ADV7321KSTZ - 216MHz Multiformat HD Video Encoder | Analog Devices

The Analog Devices ADV7321KSTZ is a multiformat 216 MHz digital-to-analog video encoder with six high-speed NSV 12-bit DACs, housed in a 64-pin LQFP (10x10 mm) surface-mount package. It converts standard definition, progressive scan, and high definition digital video into analog CVBS, S-Video, YPbPr, or RGB outputs. A video encoder is a mixed-signal device that sits at the end of a video processing pipeline, converting digital video streams (typically parallel YCrCb or RGB data) into industry-standard analog waveforms for display, recording, or broadcast. Video encoders form part of the video encoder family within analog front-end ICs, which in turn belong to the broader power-and-signal-chain semiconductor hierarchy alongside ADCs, DACs, and interface ICs. The ADV7321 integrates the DAC conversion, interpolation filters, and analog drive circuitry on a single monolithic chip. Key features include six NSV (noise-shaped video) 12-bit DACs operating at up to 216 MHz, TTL-compatible input ports accepting 8-/10-, 16-/20-, and 24-/30-bit data, and full compliance with SMPTE video standards including SMPTE 296M (720p at 74.25 MHz) and SMPTE 240M (1035i), plus 10-bit 4:4:4 RGB. NTSC and PAL standard-definition encoding is supported alongside HD formats. The NSV DAC architecture uses noise shaping and oversampling to move quantization noise out of the video band, improving signal-to-noise ratio and picture quality compared with conventional Nyquist-rate video DACs. Separate input ports allow simultaneous handling of high-definition and standard-definition data streams, simplifying dual-output designs. Typical applications include DVD players and recorders (CGMS-A copy-protection support for 625p outputs), EVD players, progressive-scan and HDTV set-top outputs, and professional video test equipment. Design consideration: provide a clean low-noise 2.5 V analog supply and follow the manufacturer's recommended decoupling, since DAC noise performance directly sets output video SNR. This page adds drop-in alternative analysis, application guidance, and comparison tables that go beyond the manufacturer datasheet alone.

RFQ پەیوەندی
ADV7340BSTZ - Multiformat Video Encoder, Six 12-Bit DACs | Analog Devices
ADV7340BSTZ

ADV7340BSTZ - Multiformat Video Encoder, Six 12-Bit DACs | Analog Devices

The Analog Devices ADV7340BSTZ is a multiformat standard-definition and high-definition video encoder with six high-speed, Noise Shaped Video (NSV) 12-bit DACs operating from a 3.3 V analog supply, housed in a 64-lead LQFP (10 mm x 10 mm) package. A video encoder is a mixed-signal IC that converts a digital video stream from a processor, FPGA, or graphics controller into standard analog video formats. It sits in the video signal chain downstream of digital video interfaces and upstream of composite/S-Video/component analog outputs, performing digital-to-analog conversion, video timing generation, and analog waveform shaping in a single device. Video encoders belong to the broader family of data converters and video interface ICs. Key features of the ADV7340 include six 12-bit noise-shaped video DACs supporting composite (CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard-definition and high-definition modes, integrated video timing control, on-chip color space conversion, programmable filtering, and support for NTSC/PAL encoding per manufacturer documentation. The NSV DAC architecture reduces quantization noise in the video band, improving signal-to-noise ratio on analog outputs compared with conventional DAC architectures. The encoder accepts standard digital video input formats such as BT.656 and BT.601 parallel video with embedded or external sync, and uses an I2C-compatible serial interface for register configuration. Analog Devices specifies an industrial temperature grade for this package variant, making it suitable for equipment that must operate in uncontrolled environments. Programmable output amplitude and pedestal settings support both consumer and professional video levels. Typical applications include DVD and Blu-ray player analog outputs, set-top box composite and component outputs, surveillance and CCTV equipment, broadcast and professional video test equipment, and legacy video interfaces embedded in FPGA or processor-based systems where analog video outputs must coexist with modern digital links such as HDMI (for example, paired with the ADV7511 digital video transmitter). When designing with this part, note that the manufacturer lists it as NOT RECOMMENDED FOR NEW DESIGNS; new projects should evaluate the pin-compatible ADV7341, which requires no Macrovision license. Ensure the 3.3 V analog supply is well decoupled and filtered, and place the output reconstruction filter close to the DAC outputs. This page adds distributor availability insight, a drop-in alternative analysis based on the manufacturer's own support forum guidance, and practical design notes not found in the datasheet alone.

RFQ پەیوەندی
ADV7342BSTZ - 6x 11-Bit 297MHz Video Encoder | Analog Devices
ADV7342BSTZ

ADV7342BSTZ - 6x 11-Bit 297MHz Video Encoder | Analog Devices

The Analog Devices ADV7342BSTZ is a high-speed multiformat digital-to-analog video encoder with six 11-bit 297 MHz video DACs, housed in a 64-lead LQFP (10x10 mm) package. It supports composite (CVBS), S-Video (Y/C), and component (YPrPb/RGB) analog outputs in standard definition (SD), enhanced definition (ED), and high definition (HD) video modes. A video encoder is a mixed-signal device that converts digital video data from a graphics processor or video decoder into standard analog video formats. It sits at the output stage of the video signal chain, downstream of the pixel-processing pipeline, and is classified within the broader family of digital-to-analog converter ICs, video interface ICs, and video display semiconductors. Key features include six high-speed 3.3 V, 11-bit video DACs, 297 MHz DAC sampling for HD output, 4x oversampling to reduce output filtering requirements, support for NTSC, PAL, and HD tri-level sync formats, and integrated timing control. The 11-bit DAC resolution delivers high image fidelity with low differential gain and phase error, while the multi-DAC architecture allows simultaneous CVBS, S-Video, and component outputs from one device. Architecturally, the ADV7342 combines an input pixel-port with format conversion, integrated SSPLL for precise pixel-clock recovery, programmable gain and offset control, and blanking/sync insertion before final digital-to-analog conversion. The high 297 MHz DAC rate with 4x oversampling moves the first Nyquist image band well above the video passband, simplifying reconstruction filtering and reducing visible artifacts. Typical applications include DVD and Blu-ray player analog video output stages, set-top box composite and component outputs, professional video distribution and test equipment, and industrial display systems. The single-chip multi-format solution replaces multiple discrete DACs and sync generators, saving board space and BOM cost. For design, note the device is marked Not Recommended for New Designs by Analog Devices; new designs should evaluate successor encoders, while the ADV7342 remains a valid choice for sustaining existing production. Ensure a clean 3.3 V analog supply and proper ground isolation for optimal DAC performance. This page synthesizes distributor availability, drop-in alternatives, application guidance, and practical design notes not found in the manufacturer datasheet, providing engineers a decision-ready view of the ADV7342BSTZ.

RFQ پەیوەندی
ADV7390BCBZ-A-RL - 10-Bit 3-DAC Video Encoder | Analog Devices
ADV7390BCBZ-A-RL

ADV7390BCBZ-A-RL - 10-Bit 3-DAC Video Encoder | Analog Devices

Analog Devices ADV7390BCBZ-A-RL is a high-speed digital-to-analog video encoder with three 10-bit DACs, 2.7 V or 3.3 V operation, and a 30-ball WLCSP package measuring 2.53 mm by 3 mm. The device converts digital Y-C or RGB video data into composite CVBS and S-Video analog outputs for DVD players, game consoles, media players, and other consumer video equipment. A video encoder is a semiconductor that translates digital image data into standards-compatible analog signals suitable for composite or S-Video connections. Within the signal-chain hierarchy, the ADV7390 is an interface IC and video-conversion device. Its DAC-based architecture provides three independently controllable analog outputs, while cable detection, DAC power-down, sleep mode, and content-dependent low-power operation help reduce consumption when video output is unused. The encoder supports 8-bit, 10-bit, and 16-bit high-definition input interfaces at clock rates up to 74.25 MHz. According to the manufacturer datasheet, the device supports SMPTE 274M for 1080i, SMPTE 296M for 720p, and SMPTE 240M for 1035i, together with EIA/CEA-861B compliance support. Individual DAC enable controls and automatic cable detection support system-level power management. Its monolithic implementation integrates three 10-bit DACs with digital video-processing logic, minimizing external components and board area. The ADV7390 family supports composite CVBS and Y-C S-Video outputs, while its patented content-dependent low-power DAC behavior reduces activity when the source picture does not require full output drive. The 30-ball WLCSP uses a compact 0.5 mm ball pitch, making careful PCB layout and assembly control important in portable and space-constrained equipment. Typical applications include legacy game-console video outputs, DVD player analog interfaces, portable media-player TV-out functions, set-top and media-player equipment, and industrial control panels requiring composite video. The low-power architecture is particularly useful where the encoder must remain available while the system frequently changes between active video and standby states. Designers should preserve the datasheet-recommended input, output, and reference circuitry, route sensitive analog signals away from digital switching paths, and verify thermal performance across the full operating-temperature range. The small WLCSP footprint reduces board area but requires careful ball placement, solder mask design, and assembly-process control. This page consolidates the device architecture, verified electrical characteristics, package details, application guidance, and drop-in replacement analysis into an engineering-focused reference for evaluating the ADV7390BCBZ-A-RL in compact analog-video systems.

RFQ پەیوەندی