ژێرپۆلەکان

📁 Analog Switches 1 بەرهەمەکان 📁 Audio Codecs 59 بەرهەمەکان 📁 Bus Repeaters, Buffers & Extenders 2 بەرهەمەکان 📁 Communication ICs 1 بەرهەمەکان 📁 Digital Isolators 15 بەرهەمەکان 📁 Drivers, Receivers, Transceivers 5 بەرهەمەکان 📁 Ethernet ICs 1 بەرهەمەکان 📁 Ethernet PHYs 8 بەرهەمەکان 📁 Ethernet Transceivers 7 بەرهەمەکان 📁 I/O Expanders 3 بەرهەمەکان 📁 I2C 1 بەرهەمەکان 📁 Industrial Interfaces 1 بەرهەمەکان 📁 Interface Transceivers 5 بەرهەمەکان 📁 LIN Transceivers 28 بەرهەمەکان 📁 LVDS Drivers 1 بەرهەمەکان 📁 Logic Drivers 1 بەرهەمەکان 📁 Logic ICs 7 بەرهەمەکان 📁 Modems 1 بەرهەمەکان 📁 Network Interface 1 بەرهەمەکان 📁 PCI Express Switches 0 بەرهەمەکان 📁 RS-232/RS-422/RS-485 Interface 4 بەرهەمەکان 📁 RS-485 Transceivers 23 بەرهەمەکان 📁 RS-485/RS-422 22 بەرهەمەکان 📁 Sensor and Detector Interfaces 0 بەرهەمەکان 📁 SerDes 0 بەرهەمەکان 📁 Signal Buffers, Repeaters 2 بەرهەمەکان 📁 Signal Processing 0 بەرهەمەکان 📁 Specialized Interface 1 بەرهەمەکان 📁 Telephony Interfaces 2 بەرهەمەکان 📁 Touch Screen Controllers 1 بەرهەمەکان 📁 USB Connectors 4 بەرهەمەکان 📁 USB Controllers 1 بەرهەمەکان 📁 USB Hubs 1 بەرهەمەکان 📁 USB Interface ICs 37 بەرهەمەکان 📁 Video Codecs 0 بەرهەمەکان 📁 Video ICs 78 بەرهەمەکان

بەرهەمەکان (560+)

ADV7533BCBZ-RL7 - MIPI/DSI to HDMI 1.3 Interface | Analog Devices
ADV7533BCBZ-RL7

ADV7533BCBZ-RL7 - MIPI/DSI to HDMI 1.3 Interface | Analog Devices

Analog Devices ADV7533BCBZ-RL7 is a multifunction MIPI/DSI-to-HDMI video interface IC with a 49-ball WLCSP surface-mount package measuring 3.45 mm by 3.45 mm. It accepts MIPI DSI display input, provides HDMI 1.3 and DVI 1.0 output, supports I2C, I2S, CEA-861E, and embedded HDCP options, and operates from low-voltage supplies for portable display systems. A video interface IC converts, conditions, and manages digital display signals between a host processor and a display. In the product hierarchy, the ADV7533 is a multifunction display interface, a MIPI/DSI receiver, and an HDMI transmitter. This combination is especially useful in mobile and embedded systems where an application processor drives a high-definition display through a compact board connector rather than a full-size HDMI source. Key features include a low-power MIPI/DSI receiver, a low-power HDMI/DVI transmitter, HDMI 1.3 technology with x.v.Color support, and DVI 1.0 compatibility. The device includes an I2C master for EDID reading and 5 V tolerance on the I2C and Hot Plug detect pins. A CEC controller with an expanded three-message buffer reduces host overhead, while optional embedded HDCP keys support HDCP 1.3 content protection. The ADV7533 is fabricated on an advanced CMOS process and combines display input, transmitter output, audio handling, and display-control functions in one compact package. Its 49-ball WLCSP format supports space-constrained portable equipment, but careful escape-routing, thermal, grounding, and signal-integrity practices are required. The datasheet identifies 1.8 V and 3.3 V supplies, with a 1.2 V supply available as an option. Typical applications include mobile phones, tablets, portable media equipment, automotive infotainment displays, and other MIPI DSI systems requiring an HDMI output. The integrated EDID master and CEC controller can simplify display discovery and control tasks, while HDMI transmitter integration reduces the number of discrete interface components required near the display connector. For implementation, follow the manufacturer's recommended DSI lane routing, HDMI differential-pair geometry, supply decoupling, and ball-escape layouts. The 3.45 mm by 3.45 mm WLCSP has a dense ball pitch, so PCB mask spacing, solder-paste volume, assembly profile, and via-in-pad practices should be reviewed with the package drawing and assembly requirements. This product record combines the ADV7533 interface capabilities, exact package designation, manufacturer documentation links, and engineering guidance for MIPI DSI-to-HDMI designs. It also distinguishes the exact ADV7533BCBZ-RL7 ordering code from related ADV7533 devices that may differ in package suffix, temperature grade, or production configuration.

RFQ پەیوەندی
ADV7802BSTZ-150 12-Bit Video Decoder | Analog Devices
ADV7802BSTZ-150

ADV7802BSTZ-150 12-Bit Video Decoder | Analog Devices

The Analog Devices ADV7802BSTZ-150 is a 12-bit, multiformat 3D comb-filter video decoder, digital composite-video decoder, and graphics digitizer designed for SDTV and HDTV signal-chain processing. The device supports PAL, NTSC, and SECAM composite or S-Video inputs and converts decoded video into digital ITU-R BT.656 format. It is packaged in a 176-lead LQFP measuring 24 mm by 24 mm and uses an I²C control interface. A video decoder is an interface IC that converts analog video signals into a standardized digital representation. Within the signal path, the ADV7802 integrates three related operations: 3D comb filtering removes cross-color artifacts from composite video, multiformat decoding extracts luminance and chrominance information, and graphics digitization converts graphics or graphics-related video signals into digital data. This integrated role reduces the need for separate comb-filter and digitizer stages in broadcast, industrial, and professional video equipment. The principal features of the ADV7802 include 12-bit processing, support for PAL, NTSC, and SECAM standards, composite and S-Video handling, ITU-R BT.656 digital output, 3D comb filtering, and graphics-digitizer functionality. Its multiformat architecture allows one decoder design to cover several legacy television standards, while the graphics-digitizer section extends the device beyond basic broadcast decoding. The integrated I²C interface provides a suitable control path for programmable video equipment. The -150 suffix identifies the manufacturer's speed grade, while BSTZ identifies the 176-lead LQFP package option. The large 24 mm by 24 mm package provides 176 external leads for the required analog inputs, digital data interfaces, clocks, controls, and supply connections. Compared with a discrete decoder arrangement, the highly integrated ADV7802 reduces component count and simplifies synchronization between comb filtering, decoding, and digitization. Thermal and layout design must nevertheless account for the analog and digital signals sharing one large fine-pitch package. Typical uses include broadcast video conversion equipment, professional video routers, industrial inspection systems, security-video interfaces, television manufacturing and test systems, and legacy video standards-conversion products. In a composite-video capture design, the ADV7802 can accept analog composite input, perform decoding and 3D comb filtering, and provide an ITU-R BT.656 output to a digital video processor. In a graphics-digitization product, the same family can support digital acquisition of graphics or graphics-related video content. PCB implementation should preserve controlled impedance on digital video nets and maintain short, separated analog and digital return paths. Follow the Analog Devices ADV7802 data sheet for the pin-description table, supported operating modes, clock requirements, reference circuitry, supply sequencing, and recommended decoupling values. Use the EVAL-ADV7802 evaluation board as an initial hardware and firmware reference when validating signal integrity, register configuration, and multiformat decoding behavior. This product page combines the ADV7802 family description with package, interface, standards, and drop-in ordering guidance. It also provides practical design notes and a parameter comparison to distinguish speed-grade alternatives from devices with different decoder architectures, helping engineers select the correct 176-lead LQFP option before board layout begins.

RFQ پەیوەندی
AK4103AVF 192kHz 24-Bit Audio Transmitter | AKM
AK4103AVF

AK4103AVF 192kHz 24-Bit Audio Transmitter | AKM

The Asahi Kasei Microdevices AK4103AVF is a two-channel audio transmitter IC for digital audio signal transmission, featuring a 24-bit DIT interface and operation up to 192 kHz in a 24-VSOP package. The part is designed for professional audio, broadcast, communications, and digital audio equipment where a high-resolution stereo audio source must be serialized into a digital transmission format. Its 24-bit resolution supports detailed digital audio conversion, while the 192 kHz sampling capability supports high-rate audio paths. An audio transmitter IC converts parallel or internally formatted audio data into a serial digital stream for transmission between audio devices, converters, routers, and digital mixing equipment. Within the signal chain, it belongs to the digital audio interface category and supports the broader hierarchy of audio codec, interface IC, and semiconductor. The AK4103AVF is particularly relevant when an audio system requires a dedicated two-channel digital transmission stage rather than a general-purpose transceiver. The principal identifiable features are two audio channels, 24-bit resolution, and a maximum sampling frequency of 192 kHz. The 24-VSOP package supports surface-mount PCB assembly and is identified in distributor documentation as a 24-LSSOP-compatible package. The exact interface voltage, clocking requirements, channel format, power-supply range, and control-register organization should be confirmed against the manufacturer datasheet before a new design is released. AK4103AVF is positioned for applications requiring high-resolution stereo audio transport, including digital mixing equipment, broadcast consoles, professional audio interfaces, studio signal routing, and embedded audio transmission subsystems. The device can be used where the transmitter must preserve 24-bit word length while supporting high-rate sampling. System designers should ensure that the surrounding converter, serializer, receiver, and clock architecture match the transmitter's required digital format. The most important design consideration is interface verification. Because the AK4103AVF is a dedicated audio transmitter, its data timing, master/slave mode, word-length setting, clock polarity, and power requirements determine compatibility with the rest of the signal chain. Review the pin-description and timing diagrams in the manufacturer datasheet before assigning PCB tracks or connecting source equipment. This page provides practical application guidance, interface-oriented design notes, verified distributor references, and structured technical context for engineers evaluating AK4103AVF in high-resolution stereo audio systems.

RFQ پەیوەندی
AK4118AEQ - 192kHz 24-Bit 8-Channel Audio Transceiver | AKM
AK4118AEQ

AK4118AEQ - 192kHz 24-Bit 8-Channel Audio Transceiver | AKM

The Asahi Kasei Microdevices AK4118AEQ is a digital audio interface transceiver supporting 192kHz, 24-bit audio across eight channels, with two transmitter outputs and seven receiver inputs, in a 48-LQFP 7x7 mm package. It handles both consumer and professional channel-status formats and can automatically identify a non-PCM bitstream. A digital audio transceiver is an interface IC that converts between digital audio streams and their electrical interface requirements while recovering clock, data, and channel-status information. In the audio-signal hierarchy, the AK4118AEQ sits between source or codec circuitry and a digital audio bus, where it supports receiver, transmitter, or bidirectional digital audio paths. Its eight GPIO pins provide additional control or general-purpose interface functions. Key features include operation up to 192kHz with 24-bit word length, support for consumer and professional channel-status decoding, automatic non-PCM detection, and dedicated-pin or serial microprocessor control of operating modes. The device can operate as a two-transmitter, seven-receiver audio interface, allowing one device to bridge several digital audio connections. Its 48-LQFP package provides 48 external leads for the parallel, serial, clock, data, status, and control functions. The AK4118A architecture separates transmit and receive channel handling while adding register-based configuration, GPIO, and channel-status support. Automatic non-PCM detection is especially useful when equipment must identify compressed or non-linear PCM streams reliably. Together with the AK4626A or AK4628A multichannel codec, the AK4118A can form an AC-3-capable signal chain, as identified in the manufacturer datasheet. Typical applications include professional digital audio equipment, multichannel recording systems, broadcast and studio converters, consumer surround systems, optical-disc receivers, and interface boards that require bidirectional digital audio connectivity. The seven receiver channels are particularly useful for accepting multiple digital sources, while the two transmitter channels support routing decoded or received audio onward to another processor. PCB design should preserve short, impedance-controlled connections for digital audio signals and place support components close to their associated pins. Follow the manufacturer pin-description table when assigning tracks, especially for clock, data, mode-control, and serial-control signals. Confirm interface levels, supported electrical standards, and input/output routing in the datasheet before finalizing a multi-channel audio board. This product page combines the manufacturer's key interface capabilities, a function-focused comparison with known digital-audio alternatives, and practical implementation guidance. It helps engineers identify whether the AK4118AEQ is the appropriate eight-channel transceiver, how it fits around AK4626A and AK4628A codecs, and which functional alternatives require different pin assignments or modified circuit boards.

RFQ پەیوەندی
AK4126XQ - 6-Channel 192kHz 24-Bit SRC | Asahi Kasei
AK4126XQ

AK4126XQ - 6-Channel 192kHz 24-Bit SRC | Asahi Kasei

The Asahi Kasei Microdevices AK4126XQ is a 6-channel asynchronous sample-rate converter capable of processing 24-bit audio data at a maximum sampling frequency of 192 kHz, supplied in a 64-pin LQFP package. It is designed for audio systems that require input and output clocks, data widths, or sampling rates to be converted between asynchronous sources. An asynchronous sample-rate converter is an interface IC that transfers digital audio between systems whose clocks are not phase-locked. Instead of requiring both devices to share a common master clock, the converter accepts independently generated clocks and regenerates the output data clock. This capability helps isolate clock-domain differences, simplifies system integration, and supports professional audio, broadcast, consumer, and multichannel playback equipment. The verified product information identifies six audio channels, 24-bit conversion, operation up to 192 kHz, and asynchronous sample-rate conversion. The 64-pin LQFP package provides a practical surface-mount footprint for multichannel digital-audio boards. Unlike a basic audio codec, the AK4126XQ is identified as an Audio Special Purpose component and focuses on digital sample-rate conversion rather than analog-to-digital and digital-to-analog signal conversion. Its multichannel architecture makes one device suitable for surround-sound, home-theater, professional mixing, digital-recording, and media-transport subsystems where multiple channels must undergo consistent rate conversion. Asynchronous operation is particularly valuable when the source equipment, processing engine, and destination equipment use unrelated clocks or require independent rate adaptation. Designers should confirm clock topology, supported input and output rates, digital-audio interface format, voltage levels, signal timing, and decoupling requirements against the manufacturer datasheet before layout release. The relatively high pin count also warrants careful review of power and ground distribution, clock jitter margins, and routing of data signals. This product page consolidates verified distributor information, package identification, application guidance, and engineering-selection criteria. It also clearly separates documented facts from parameters that require confirmation from the complete manufacturer datasheet, helping engineers plan sourcing without confusing general audio-converter characteristics with verified AK4126XQ values.

RFQ پەیوەندی
ATMXT112S-MA5U - 112-Ch maXTouch Touchscreen IC | Microchip
ATMXT112S-MA5U

ATMXT112S-MA5U - 112-Ch maXTouch Touchscreen IC | Microchip

The Microchip Technology ATMXT112S-MA5U is a maXTouch S Series capacitive touchscreen controller IC optimized for screens up to 3.5 inches, featuring 112 mutual-capacitance sensing nodes, the industry's most advanced on-chip noise mitigation system, and a surface-mount QFN package suffix MA5U. A capacitive touchscreen controller is a specialized interface-sensor IC that measures tiny capacitance changes on a projected-capacitive (PCAP) sensor panel and converts finger and stylus positions into digital coordinates for a host processor. Within the system hierarchy, it sits between the physical touch sensor (ITO patterned glass or film) and the host MCU or application processor, making it a key element of human-machine interface (HMI) and interface IC subsystems in embedded products. Key features of the ATMXT112S-MA5U include the maXTouch S Series architecture delivering smartphone-like touch performance, 112 nodes supporting sensor panels up to 3.5 inches, and an on-chip noise mitigation engine that rejects charger and display noise without external filtering components. It communicates with the host over a standard I2C-style serial interface and supports self- and mutual-capacitance scanning for gloved-hand and proximity detection behavior typical of the maXTouch family. Technically, the S Series generation integrates the acquisition engine, touch-processing firmware, and noise rejection in a single chip, offloading touch decoding entirely from the host CPU. This allows designers to add a responsive multi-touch interface to cost-sensitive devices while retaining a minimal bill of materials - typically the controller, the sensor panel, and a small number of passive support components. Typical applications include smart watches and small wearables, portable medical and industrial handheld instruments, IoT device control panels, and compact appliance or automotive-adjacent HMI panels where screen sizes of 3.5 inches or below are used. A key design consideration is matching the controller's 112-node budget to the sensor electrode count; over-counting nodes forces reduced scan rates, while under-utilization wastes cost. Firmware configuration files supplied by Microchip tuning tools should be validated on the actual sensor stack. This page synthesizes verified distributor stock data, manufacturer cross-references, drop-in alternative analysis, and practical design guidance not found together in the standard datasheet.

RFQ پەیوەندی
ATMXT1386E-Z2UIR - 1386-Node maXTouch Controller | Microchip
ATMXT1386E-Z2UIR

ATMXT1386E-Z2UIR - 1386-Node maXTouch Controller | Microchip

The Microchip Technology ATMXT1386E-Z2UIR is a capacitive touch screen controller from the maXTouch platform, implementing a 1386-node multi-chip solution (4 chips) that supports up to 16 simultaneous touches with I2C interface, a 150 Hz touch response rate, and support for screens up to 15.6 inches, supplied in Tape & Reel packaging. A capacitive touch screen controller is an integrated circuit that measures changes in capacitance across a touch sensor grid to determine finger or stylus position. Within the power-management and human-interface IC hierarchy, touch controllers sit between the raw sensor substrate and the host application processor, converting analog charge-transfer measurements into digital touch coordinates. The maXTouch family pairs charge-transfer analog front ends with a powerful 32-bit AVR microcontroller core for on-chip touch processing. Key features include the 1386-node sensing capacity delivered by a 4-chip multi-chip architecture, unlimited touch reporting up to 16 simultaneous touches, automotive qualification, and an operating temperature range of -40C to +85C. The high-performance architecture enables fast response at 150 Hz scan rate, supporting large-format displays with low latency. Technically, the device combines Microchip charge-transfer acquisition technology with 32-bit AVR processing, offloading touch detection, noise filtering, and gesture processing from the host CPU. Communication with the host uses an I2C interface. The -E variant is the automotive-qualified version of the ATMXT1386 platform, making it suitable for harsh automotive cabin environments where consumer-grade controllers would not meet reliability requirements. Typical applications include automotive center-stack touch displays, in-vehicle infotainment (IVI) panels up to 15.6 inches, industrial HMI panels requiring multi-touch, and large-format consumer touch screens. Automotive qualification and the wide -40C to +85C temperature range make the -Z2UIR variant particularly appropriate for vehicle cockpit systems. Design consideration: the multi-chip (4-chip) solution requires careful PCB floor planning of the sensor traces and inter-chip routing; firmware/configuration objects must be programmed to match the specific sensor panel geometry. Note that Microchip lists ATMXT1066T2 as the recommended alternative touch controller for new designs. This page synthesizes distributor availability, the manufacturer-recommended alternative, and practical design notes not consolidated in the manufacturer product page.

RFQ پەیوەندی
ATMXT3432S-M-Z2UR - maXTouch Touch Controller | Microchip
ATMXT3432S-M-Z2UR

ATMXT3432S-M-Z2UR - maXTouch Touch Controller | Microchip

The Microchip Technology ATMXT3432S-M-Z2UR is a 32-bit capacitive touch screen controller from the maXTouch mXT3432S family, optimized for projected-capacitive touchscreens up to 17.3 inches and enabling shieldless touch designs for cost- and space-optimized products. A capacitive touch controller is an interface IC that measures tiny capacitance changes on a touch sensor grid, converts the raw mutual-capacitance data into calibrated touch coordinates, and reports gestures to a host processor. Within the interface IC hierarchy, it sits alongside touch screen converters and controllers, bridging the analog sensor domain and the digital system domain in human-machine interface designs. Key characteristics include the 32-bit processing core that runs Microchip maXTouch touch algorithms on-chip, support for screen sizes up to 17.3 inches, and shieldless operation that removes the shielding layer from the sensor stack - reducing stack-up cost and module thickness. The maXTouch family is known in the industry for superior noise immunity and a rich feature set including gesture detection, wet-finger tracking, and gloved-touch robustness. The mXT3432S generation integrates the analog front end, charge amplifiers, and a digital signal processing pipeline that performs per-channel acquisition, automatic mutual-capacitance baseline tracking, and noise filtering in the frequency domain. This architecture allows stable touch operation in the presence of display noise from LCD and OLED panels, which is a common failure mode for lower-end touch ICs. Firmware for touch tuning is supplied through Microchip's maXTouch development ecosystem. Typical applications include consumer touch monitors, industrial human-machine interfaces (HMI), smart appliances, white goods, and commercial kiosks - anywhere a panel up to 17.3 inches needs robust multi-touch response without a shield layer. When designing with this controller, budget board area and sensor routing for the full channel count, and plan for touch tuning using Microchip's tuning tools early in the project, since sensor stack-up (ITO pattern, cover lens thickness) strongly affects final performance. This page synthesizes distributor availability data, the manufacturer-recommended alternative (ATMXT2952TD), and practical integration guidance not consolidated in the manufacturer datasheet alone.

RFQ پەیوەندی
BCM5461A1KFBG - Single-Port Gigabit Ethernet PHY | Broadcom
BCM5461A1KFBG

BCM5461A1KFBG - Single-Port Gigabit Ethernet PHY | Broadcom

Broadcom BCM5461A1KFBG is a single-port Ethernet transceiver with support for 10 Mb/s, 100 Mb/s, and 1 Gb/s data rates, manufactured in a 0.13 μm process and housed in a 100-pin FBGA package. The device belongs to Broadcom's 0.13 μm Gigabit copper PHY family, combining 10/100/1000BASE-T Ethernet interface capability in a surface-mount package designed for compact network equipment. An Ethernet PHY, or physical-layer transceiver, is the component that converts logical data transferred through a media-access controller into signals suitable for a physical network medium and converts received signals back into digital data. Within the network interface hierarchy, a PHY operates beneath the Ethernet MAC and above the physical medium. The BCM5461A1KFBG therefore serves as the physical-layer element in a copper-Ethernet network interface, while MAC, PHY management, magnetics, and system-level routing are handled elsewhere in the design. The BCM5461A1KFBG supports all three principal Ethernet rates of 10 Mb/s, 100 Mb/s, and 1 Gb/s. Its single-transceiver configuration makes it appropriate for one-port routers, switches, industrial gateways, and network interface cards. The 100-pin FBGA package supports compact surface-mount layouts, but its fine pitch requires careful PCB layout, ground-plane continuity, and assembly-process control. Broadcom describes the underlying 0.13 μm process as a cost- and power-oriented implementation for Gigabit copper solutions. As part of Broadcom's 0.13 μm copper-PHY portfolio, the device supports integration with Ethernet magnetics, a MAC, and a host processor. The manufacturer identifies related family members including BCM5404, BCM5414, BCM5421, BCM5421S, BCM5424, BCM5434, BCM5464, and BCM5464S. Selection among those devices should be based on the complete datasheet, including supported rates, electrical characteristics, package drawing, register behavior, and clocking requirements rather than family membership alone. Typical deployments include industrial Ethernet gateways, embedded routers, access equipment, test instruments, and compact single-port network adapters. Its single-port organization avoids allocating resources for unused PHYs, while the 100-pin FBGA package reduces board area compared with larger leaded implementations. Systems requiring multiple physical Ethernet ports will normally need additional PHY devices and corresponding magnetics or coupling components. PCB implementation is the principal engineering consideration. Follow the manufacturer's land pattern, ball assignments, via requirements, and recommended stack-up when laying out the 100-pin FBGA. Place decoupling and clock components close to their associated balls, maintain a continuous ground reference under the device, and follow the prescribed assembly and reflow profile. Because the published excerpt does not reproduce the complete ball map, use the manufacturer pin-description table before assigning signals. This page combines the confirmed device identity, Ethernet rates, process technology, package format, sourcing information, and application analysis with explicit engineering guidance. It also distinguishes directly documented characteristics from parameters that require confirmation in the complete Broadcom datasheet, helping designers plan the PCB and system architecture without assuming unreleased electrical limits.

RFQ پەیوەندی
BCM5464A1KRBG - Quad-Port Gigabit Ethernet PHY | Broadcom
BCM5464A1KRBG

BCM5464A1KRBG - Quad-Port Gigabit Ethernet PHY | Broadcom

Broadcom BCM5464A1KRBG is a four-channel Gigabit copper Ethernet PHY supporting 10, 100, and 1000 Mb/s data rates in a 354-ball BGA package. It integrates four physical-layer transceiver channels for copper Ethernet connectivity and is positioned for network-interface, switching, industrial-control, and embedded-communication equipment. The device belongs to Broadcom’s BCM54xx family of 0.13-micrometer Gigabit copper PHY products. A copper Ethernet PHY is the physical-layer component that translates digital Ethernet data into electrical signaling for transmission over twisted-pair cables and converts received signaling back into digital data. Within a network system, the PHY operates below the MAC and network-interface controller: Ethernet frames are generated above it, while magnetics, connectors, cable, and isolation components connect below it. A multi-channel PHY reduces the number of discrete PHY devices required in multiport equipment. The BCM5464 provides four 10/100/1000BASE-T channels and supports full-duplex Gigabit operation according to the manufacturer’s BCM5464 product brief. Its consolidated implementation can simplify board partitioning compared with four separate single-channel PHYs. Parallel device availability across Broadcom’s BCM5404, BCM5414, BCM5421, BCM5421S, BCM5424, BCM5434, and BCM5464 products supports platform selection according to port count, media requirements, and system architecture. Broadcom describes the BCM5464 family as a 0.13-micrometer Gigabit copper PHY optimized for performance, cost, and power in Gigabit copper solutions. That process generation is important when integrating the device: board design must account for high-speed differential routing, controlled impedance, clean power and ground distribution, adequate return paths, and thermal performance characteristic of a large 354-ball BGA. Typical applications include multiport Ethernet switches, industrial Ethernet gateways, network-interface controllers, routers, digital video equipment, factory automation systems, and embedded platforms requiring several copper Gigabit ports. The device can also participate in designs that combine copper access with other network media when the surrounding controller supports mixed-media aggregation. The primary design constraint is that BCM5464A1KRBG is a complex, high-pin-count BGA rather than a simple peripheral IC. Its layout should follow the manufacturer’s reference design and pin-assignment documentation, including ball-grid escaping, layer transitions, decoupling, clock requirements, and PHY-to-magnetics spacing. Confirm the exact exposed-pad and thermal-land requirements before releasing artwork. This page combines the BCM5464 product-brief specifications with application guidance, selection criteria, engineering notes, and verified availability references. It also distinguishes confirmed substitutes from candidates whose package and pin compatibility still require engineering review, helping designers avoid treating merely similar Ethernet PHYs as drop-in replacements.

RFQ پەیوەندی
BCM5481A2IFBG - 1GbE RGMII PHY | Broadcom
BCM5481A2IFBG

BCM5481A2IFBG - 1GbE RGMII PHY | Broadcom

Broadcom BCM5481A2IFBG is a single-port 1000 Mbps Ethernet physical-layer transceiver for copper networks, implemented in CMOS and packaged in a square, 100-terminal surface-mount ball package. It supports a 1-port Gigabit Ethernet PHY role with RGMII copper connectivity, making it suitable for network switches, routers, gateways, industrial Ethernet equipment, and embedded communications platforms. An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts parallel digital data into signals suitable for transmission over twisted-pair copper cabling. The BCM5481A2IFBG belongs to the Gigabit Ethernet interface hierarchy: Ethernet controller or switch MAC, RGMII interface, Ethernet PHY, network interface, and semiconductor. Its 100-terminal package provides the mixed-signal and digital interface connections required by a complete single-port Gigabit Ethernet copper interface. The BCM5481A2IFBG is identified as a 1-port Gigabit Ethernet PHY using RGMII and copper media technology. A nominal 1000 Mbps line rate supports full-duplex Gigabit Ethernet designs, while the RGMII interface provides a conventional parallel connection to an Ethernet MAC or switching fabric. These characteristics make the device relevant to designs that require a dedicated copper PHY rather than a PHY integrated into a larger Ethernet controller. The device uses CMOS technology and is supplied in a square, 100-terminal ball-grid-style package identified in the component record as BCM5481A2IFBG. The component is listed as a Broadcom interface IC and is categorized among drivers, receivers, and transceivers. Its manufacturer-package quantity is 1, while the listed moisture-sensitivity classification is MSL1, indicating unlimited floor-life handling after the package has been subjected to the applicable moisture exposure conditions. Typical BCM5481A2IFBG applications include 10/100/1000BASE-T network switches, industrial routers, telecommunications access equipment, set-top and home-gateway platforms, and embedded systems requiring an RGMII copper PHY. In these systems, the RGMII signals connect the PHY to a network MAC, while magnetics and the physical cable interface complete the copper path. The exact media-side implementation and magnetics selection should follow the Broadcom reference design and current datasheet. Designers should confirm RGMII voltage levels, clocking mode, timing margins, decoupling, thermal performance, and the exposed-ball or land-pattern requirements before layout release. Because this package contains 100 terminals and mixes high-speed digital interfaces with analog Ethernet functions, short ground-return paths, clean supply distribution, controlled clock routing, and careful ball-pattern alignment are essential. Use the manufacturer pin-description table and layout guidance when assigning every ball and planning the PCB footprint. This product page combines the verified BCM5481A2IFBG identity, package and interface details with practical Ethernet PHY design guidance, sourcing questions, and a structured framework for comparing replacement choices. It is intended to help engineers confirm fit, assess the RGMII copper-PHY application, and identify the documentation needed before committing a board to production.

RFQ پەیوەندی
BCM8155FAIFBG - 11.352 Gbps XFI Transceiver | Broadcom
BCM8155FAIFBG

BCM8155FAIFBG - 11.352 Gbps XFI Transceiver | Broadcom

The Broadcom BCM8155FAIFBG is a high-speed XFI transceiver for long-haul serial communication, supporting data rates from 8.5 Gbps to 11.352 Gbps. It is designed for applications requiring compliant serial links, robust signal integrity, and built-in test and fault-isolation capabilities. The device includes enhanced capability for long-haul transmission with selectable RZ modulation on the transmitter. An XFI transceiver is a high-speed interface IC that converts parallel or serial logic into a physical serial channel and receives data from that channel. It belongs to the broader hierarchy of transceiver, communication interface, interface IC, and semiconductor products. The BCM8155 operates in demanding data-center, telecom, and industrial communication systems where link margin, standards compliance, and diagnostic coverage are important design considerations. Key features include support for OIF, Telcordia, ITU-T, XFI, and IEEE 802.3ae requirements. Its supported range of 8.5 Gbps to 11.352 Gbps supports 10G-class and related high-speed serial links. Input sensitivity is specified at 10 mV peak-to-peak, which provides a defined receiver sensitivity reference for link-budget calculations. The device also provides loopbacks, a pattern generator, and a pattern checker for fault isolation and board-level validation. The BCM8155 is intended for optical-module, backplane, router, switch, and test-equipment designs where a standardized XFI interface helps simplify interoperability between high-speed PHY or ASIC subsystems. Its diagnostic features allow engineers to isolate transmitter, receiver, pattern-generation, and pattern-verification failures without relying only on external instrumentation. RZ modulation support can provide additional flexibility for long-haul transmission and signal-integrity optimization. When designing around this transceiver, use the manufacturer pin-description and reference-circuit information to assign power, ground, signal, control, and test pins. Confirm the completed channel budget against 11.352 Gbps operation and the receiver sensitivity requirement. Review termination, differential routing, connector or optical-interface transitions, and return-path continuity before releasing the PCB layout. The device should be treated as a precision high-speed component, with controlled impedance and short return paths especially important in multilayer designs.

RFQ پەیوەندی
BD34700FV-E2 - 4-Channel Sound Processor | ROHM
BD34700FV-E2

BD34700FV-E2 - 4-Channel Sound Processor | ROHM

The ROHM BD34700FV-E2 is a four-channel independent volume system, or analog sound processor, with built-in micro-step volume and a 6.5 V to 7.5 V supply range. It is supplied in the SSOP-B40 package and is designed for AV receivers and simple two-channel audio systems. The device uses micro-step volume to reduce switching pop noise during volume changes, helping preserve clean sound transitions. A sound processor such as the BD34700FV-E2 belongs to the audio signal-control hierarchy: analog audio processor -> volume-control IC -> audio special-purpose IC -> semiconductor. In a typical audio system, the processor sits between source-selection circuitry or preamplifier outputs and power-amplifier inputs. Its principal function is to provide independent attenuation and volume control for multiple audio channels while maintaining low-noise signal handling. The four-channel architecture is useful when a system needs separate main-volume, sub-volume, surround, or zone controls. The ROHM product page identifies the BD34700FV as a four-channel independent-volume system specifically suited to subvolume control in multichannel AV receivers and main-volume control in simple two-channel systems. This makes it a practical choice when several analog audio paths require coordinated level adjustment without assigning a dedicated attenuator to each channel. The built-in micro-step volume function is the central technical feature. Instead of changing the attenuation in large abrupt steps, the processor uses smaller volume increments, which can reduce audible switching pop noise during level transitions. In practice, the benefit depends on the surrounding signal path, control timing, and the selected attenuation step, but it can improve perceived audio quality during user-controlled volume changes. The BD34700FV-E2 uses an SSOP-B40 package and is identified by ROHM as an audio-channel, audio-special-purpose device. The verified product information confirms its 6.5 V to 7.5 V operating supply range, four-channel volume architecture, and micro-step volume feature. Detailed electrical limits, pin assignments, recommended application circuits, control-interface timing, and package dimensions should be taken from the manufacturer datasheet when finalizing a PCB design. Typical deployments include AV receivers, stereo amplifiers, compact audio systems, television audio paths, and other multichannel analog equipment. In an AV receiver, the device can provide independent level control for surround or subvolume channels; in a stereo product, it can provide the main volume function. The design should preserve adequate signal headroom between the processor and the downstream amplifier. For PCB implementation, confirm the exact SSOP-B40 footprint, pin numbering, exposed thermal-pad arrangement, and decoupling requirements in the ROHM datasheet. Connect the supply pins to the specified 6.5 V to 7.5 V range, place bypass capacitors close to the supply pins, and keep analog input and output routing short to reduce added noise and crosstalk. This product page combines the manufacturer’s product description with a practical view of channel architecture, micro-step volume behavior, package constraints, and design checks. It also distinguishes verified functions from electrical details that require direct review of the ROHM datasheet before a production release.

RFQ پەیوەندی
BD37033FV-ME2 - 5-Channel I2C Audio Processor | ROHM Semiconductor
BD37033FV-ME2

BD37033FV-ME2 - 5-Channel I2C Audio Processor | ROHM Semiconductor

ROHM Semiconductor BD37033FV-ME2 is a 5-channel car-audio sound processor with a 7 V to 9.5 V supply range, I2C control, and a 28-pin SSOP-B package. It integrates stereo source selection, three single-ended inputs, ground-isolated input, volume control, a three-band parametric equalizer, loudness, six-channel fader volume, a subwoofer low-pass filter, anti-aliasing filtering, and mixing-volume functions. An automotive sound processor is an analog audio IC that manages source routing, level control, and tonal shaping within a vehicle infotainment or head-unit signal chain. Its hierarchy is audio processor, sound-control IC, analog audio IC, interface IC, and integrated circuit. Rather than performing only low-level amplification, this device centralizes multiple controls that would otherwise require separate selectors, potentiometer circuits, filter stages, and control logic. The principal features are five-channel processing, three-band parametric equalization, six-channel fader volume, and I2C bus control. The three-band equalizer supports bass, midrange, and treble adjustment, while the loudness circuit compensates perceived low-frequency response at reduced listening levels. The subwoofer low-pass function helps separate bass content for a dedicated speaker. These functions suit compact automotive electronics where component count and control simplicity are important. The BD37033FV-M architecture combines analog signal paths with a digital control interface. I2C control allows an external host processor to adjust volume and sound settings while leaving the audio routing and filtering functions in a dedicated IC. The 28-SSOP-B package also supports surface-mount assembly. Because the device operates from a single 7 V to 9.5 V rail, its power architecture is appropriate for conventional automotive audio systems where a 12 V battery is regulated before reaching the processor. Typical uses include car-audio head units, multi-zone passenger-compartment audio systems, amplified speaker modules, subwoofer crossover controllers, and aftermarket infotainment units. The device is particularly useful when a design needs centralized source selection and programmable tonal adjustments without implementing those functions as discrete analog blocks. Integration also reduces the number of interconnects between a host controller and the audio signal path. Design work should begin with the manufacturer's pin-description and application-circuit tables. Confirm that every input, output, control, ground, and supply connection is routed according to the selected single-ended or ground-isolated configuration. The audio source impedance, acceptable external-component values, control address, and output loading should also be checked against the manufacturer guidance before PCB release. This product record combines the manufacturer-described processing functions, supply range, control bus, channel count, and package information with pin-to-drop-in replacement guidance, practical integration notes, and a parameter-by-parameter comparison. It is intended to accelerate component selection and board-level implementation for automotive audio designs.

RFQ پەیوەندی
BD3808AFS-E2 22-SOP Audio Processor | ROHM Semiconductor
BD3808AFS-E2

BD3808AFS-E2 22-SOP Audio Processor | ROHM Semiconductor

ROHM Semiconductor BD3808AFS-E2 is an integrated audio processor supplied in a 22-pin SOP package and handled as a tape-and-reel component. The manufacturer identification associates the device with the BD3808 series and describes it as an IC audio processor, placing it within the broader category of audio and sound-processing semiconductors. Its 22-pin surface-mount package supports compact circuit layouts while providing separate connections for the signal-processing functions, control interface, supply rails, and external audio-network connections defined by the device architecture. An audio processor is a specialized type of signal-processing integrated circuit used to manage functions within an audio signal path. Its general hierarchy is audio processor, audio IC, signal-processing IC, and semiconductor. Unlike a simple passive filter, an active audio processor can combine multiple analog, digital, control, or mixed-signal operations in one package. The exact signal topology and supported functions for BD3808AFS-E2 must be established from the manufacturer datasheet before circuit design begins. The verified product identity establishes the BD3808AFS-E2 ordering code, 22SOP case, tape-and-reel shipping format, and ROHM Semiconductor manufacturer. The suffix E2 identifies the orderable configuration, but the presence of the suffix alone does not establish electrical limits, temperature grade, supported audio formats, or performance figures. Those device-specific parameters require confirmation in the manufacturer datasheet rather than inference from the catalog description. BD3808AFS-E2 is intended for manufacturers integrating a dedicated audio-processing stage into home audio, consumer electronics, communication equipment, and other sound-system products. Its integrated role can simplify a design when several closely related signal operations must be coordinated in one controlled package. The 22-pin SOP format also makes it suitable for surface-mount assembly processes that do not require a fine-pitch BGA or QFN land pattern. A correct implementation depends on careful review of the pin-description table, recommended application circuit, external component values, and decoupling requirements in the manufacturer datasheet. Designers should preserve the exposed land pattern and pin numbering of the 22SOP package, route audio signals according to the reference layout, and keep sensitive analog paths physically separated from noisy return-current paths where the application guidance permits. This product page consolidates the verified ordering identity, package information, current sourcing links, and engineering selection guidance. It also distinguishes confirmed package-level facts from electrical details that must be read from the authoritative manufacturer datasheet, helping engineers create a reliable procurement and design-review record for BD3808AFS-E2.

RFQ پەیوەندی
BD3896FV-FE2 Shock Sensor Processor IC | ROHM Semiconductor
BD3896FV-FE2

BD3896FV-FE2 Shock Sensor Processor IC | ROHM Semiconductor

ROHM Semiconductor BD3896FV-FE2 is a dedicated shock sensor processor IC listed in an SSOP package. The device belongs to the sensor and detector interface class of integrated circuits, where it is intended to process shock-related sensor signals rather than directly act as a general-purpose microcontroller. Its exact electrical characteristics are defined by the BD3896FV device documentation, but the available product records do not expose operating voltage, current consumption, frequency response, gain, or environmental limits. A shock sensor processor is a specialized interface integrated circuit that receives mechanical or electrical stimulus information from a sensor and converts it into a signal suitable for measurement, detection, or control. In the broader semiconductor hierarchy, the BD3896FV-FE2 belongs to sensor processing, then interface ICs, then integrated circuits, and finally semiconductors. Its SSOP package is intended for compact, surface-mounted assemblies where a dedicated analog interface can reduce the functional burden placed on a host controller. The BD3896 family designation identifies the core device platform, while the FE2 ordering suffix distinguishes this particular orderable configuration. ROHM Semiconductor is the manufacturer named in the product records, and the BD3896FV-FE2 is specifically described as an IC shock sensor processor. Because this component is application-specific, engineers should evaluate the manufacturer’s electrical characteristics, typical application circuit, sensor-interface requirements, and recommended external components before assigning it to a PCB. The architecture of a dedicated shock sensor processor generally includes the signal-conditioning path needed to observe shock events, although the exact internal blocks cannot be inferred from the available catalog information. The SSOP package requires careful PCB footprint and solder-joint inspection during assembly. Designers should also account for the sensor’s mechanical characteristics, since package-level electrical performance alone does not determine whether a complete impact-detection system meets its required sensitivity, response time, or repeatability. Typical uses include impact and shock detection, condition-monitoring equipment, vibration-event sensing, industrial machinery protection, and compact electronic systems that receive a mechanical stimulus from a piezoelectric or related sensor. In these systems, the processor can be evaluated as the interface stage between the sensing element and a system controller, provided its documented input range, polarity, bandwidth, and output characteristics match the sensor and downstream electronics. A key design practice is to follow the manufacturer’s reference configuration for input protection, filtering, grounding, and output loading. The complete sensor chain should be tested with the intended mechanical excitation because connector routing, enclosure behavior, sensor bonding, and grounding can affect results that cannot be predicted from the IC’s package name alone. This page distinguishes the documented BD3896FV-FE2 product identity, package class, and sourcing context from the electrical details engineers must obtain from the manufacturer datasheet. It also identifies ordering alternatives and highlights the key verification steps for footprint, sensor compatibility, signal conditioning, lifecycle, and production qualification.

RFQ پەیوەندی
CH343 - 6Mbps USB to Serial UART Chip | WCH
CH343

CH343 - 6Mbps USB to Serial UART Chip | WCH

The WCH (Nanjing Qinheng Microelectronics) CH343 is a USB bus converter chip that implements USB to high-speed asynchronous serial UART conversion, supporting baud rates up to 6 Mbps with automatic baud-rate identification and dynamic adaptation for 115200 bps and below, housed in a lead-free SOP-16 surface-mount package (variant-dependent). A USB-to-UART bridge is a type of interface converter IC in the broader USB controller hierarchy: it enumerates as a USB communications device on the host and exposes a standard COM port, allowing legacy serial peripherals, MCUs, and programmers to connect to modern computers that no longer provide RS-232 ports. Bridges like the CH343 sit between USB physical-layer controllers and UART protocol devices in the system chain. Key features include 6 Mbps maximum baud rate (significantly faster than the 1-2 Mbps of typical competitors such as CH340 or CP2102), serial signal levels configurable for 5V, 3.3V, 2.5V, or 1.8V logic via the VIO supply, an integrated crystal oscillator that removes the need for an external crystal, and common MODEM handshake signals for hardware flow control. Architecturally, the CH343 contains a USB full-speed transceiver, an integrated USB protocol engine, and built-in firmware that emulates a standard asynchronous serial interface. On Windows, the chip works with the operating-system built-in CDC class driver or the vendor high-speed VCP driver, so most existing serial applications run without modification. Dual-supply operation allows VBUS powering of the chip while the MCU side runs from an independent 5V, 3.3V, 2.5V, or 1.8V rail. Typical applications include MCU programming and debugging adapters, embedded development boards (the chip is used on ESP32-class and Waveshare USB-UART boards), industrial equipment serial-port upgrades, and point-of-sale or instrumentation links. Design consideration: connect the CFG pin appropriately to select CDC or VCP behavior, and keep the VIO level matched to the target MCU to avoid level-shifting damage; RXD/TXD are the only mandatory cross-connections in simple links. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-20.

RFQ پەیوەندی
CS4236B-JQ - 2-Channel Audio Signal Processor | Cirrus Logic
CS4236B-JQ

CS4236B-JQ - 2-Channel Audio Signal Processor | Cirrus Logic

Cirrus Logic Inc. CS4236B-JQ is a 2-channel multimedia audio signal processor with an input mixer and wavetable-synthesis interface, supplied in a 100-pin TQFP package measuring 14 mm by 14 mm. The CrystalClear device is designed for legacy PC multimedia audio systems and supports Microsoft Windows Sound System operation while maintaining compatibility with software written for Sound Blaster and Sound Blaster Pro interfaces. A multimedia audio signal processor integrates several functions needed to encode, mix, and route audio signals within a computer or embedded sound-card architecture. In the wider semiconductor hierarchy, the CS4236B belongs to the audio codec and audio interface IC family, combining analog audio signal processing, digital control, and host-bus connectivity. The CS4236B adds an input mixer and wavetable-synthesis interface to the original CS4236 architecture. The CS4236B is compatible with the Microsoft Windows Sound System standard and is described as fully compliant with Microsoft PC '97 and WHQL audio requirements. Its two-channel audio processing capability supports multimedia applications that require playback, recording, mixing, and software-controlled sound functions. The 100-TQFP package provides a high pin count suitable for the device's mix of analog, digital, clock, control, and host-interface functions. Technical implementation depends on the legacy audio subsystem and its control software. Because the CS4236B remains pin-compatible with the CS4236, a replacement can reuse the original board footprint while adding input mixing and wavetable synthesis. The operating system, host interface, analog signal path, clocking arrangement, and software driver must still be checked before treating the newer device as a functional replacement in an existing system. Typical uses include vintage sound cards, industrial personal computers, multimedia kiosks, retro-computing restorations, and specialized embedded audio platforms that depend on Windows Sound System or Sound Blaster software compatibility. It is particularly relevant where an original sound controller has failed and the replacement must preserve the existing PCB layout and legacy software environment rather than adopt a modern USB audio interface. Design work should begin with the manufacturer's pin-description table and application information. Confirm the analog input and output routing, DMA and interrupt requirements, reset behavior, clock source, and supported host platform before assembly. Pay particular attention to analog grounding, reference connections, and bypass capacitors because these areas determine channel balance, noise performance, and reliability. This product page combines the functional distinctions of the CS4236B with practical guidance for legacy PC audio integration, package-aware sourcing, and verification of drop-in alternatives. It is intended to help engineers determine whether the CS4236B-JQ satisfies both the electrical interface requirements and the mechanical constraints of an existing sound-card design.

RFQ پەیوەندی
CS4280-CQ PCI Audio Interface | Cirrus Logic | 128-TQFP
CS4280-CQ

CS4280-CQ PCI Audio Interface | Cirrus Logic | 128-TQFP

Cirrus Logic, Inc. CS4280-CQ is a CrystalClear PCI audio interface integrated circuit packaged in a 128-TQFP surface-mount package measuring 20 x 14 mm. The verified distributor record identifies the device as a one-channel audio volume-control IC, while legacy hardware documentation identifies it as a PCI audio interface associated with CrystalClear sound-card designs. It is therefore best understood as a legacy multimedia audio controller rather than a modern general-purpose audio codec. An audio interface IC is a semiconductor that connects a computer or multimedia bus to an external audio subsystem. The CS4280-CQ occupies the audio-controller level of the signal chain, where digital audio and control information pass between the host system and supporting codec, converter, or amplifier circuitry. This broader category includes PCI audio controllers, audio codecs, digital volume controllers, and mixed-signal interface ICs used in computers, sound cards, and other multimedia equipment. The CS4280-CQ uses a 128-TQFP package and a nominal 3.3 V connection for the crystal and PLL supply identified in the device documentation. Its suffix corresponds to a ceramic-body quad flat package offered in a 20 x 14 mm outline. The available verified records also identify a serial control connection and a one-channel digital volume-control role, although detailed electrical limits, supported sample rates, clocking modes, and host-interface timing are not included in the supplied source data. The CS4280-CQ belongs to the CrystalClear generation of PCI audio solutions from the late 1990s. Historical documentation states that it is pin-compatible with the earlier CS4614 and CS4622/CS4624 devices and is commonly paired with the CS4297 audio codec. This makes it a notable component in period-correct PCI audio-card repair, restoration, cloning, and industrial or retro-computing projects where an original footprint can reduce board-level rework. Typical implementations include PCI sound cards, industrial personal-computer audio subsystems, multimedia appliances, and retrofit projects that require the original CrystalClear signal chain. The verified search results specifically identify the CS4280 in the JoyTech Twister 3D sound card and Pine Technology PT2620. A restoration design must also account for obsolete system drivers and operating-system support, because silicon compatibility alone does not guarantee software compatibility. For a replacement or repair, verify the PCB land pattern, supply rails, signal names, clock source, codec interface, and firmware expectations before ordering. Do not assume that a similarly described volume-control IC is electrically interchangeable. The verified data establishes CS4281-CQ as a cross-reference alternative, but the supplied records do not provide enough pin-level and parametric information to certify an unconditional drop-in replacement. This product record combines verified package, lifecycle, pricing, and legacy-compatibility information with explicitly identified data gaps. It distinguishes the CS4280-CQ from modern audio codecs, identifies the strongest documented alternatives, and highlights the host-driver and PCB-verification constraints that are essential when restoring a legacy PCI audio design.

RFQ پەیوەندی
CS8130-CS - Multi-Standard IR Transceiver 115kbps | Cirrus Logic
CS8130-CS

CS8130-CS - Multi-Standard IR Transceiver 115kbps | Cirrus Logic

The Cirrus Logic CS8130-CS is a multi-standard infrared transceiver integrated circuit delivered in a 20-pin SSOP (Small Outline Package) surface-mount package. It operates from a 2.7V to 5.5V supply, supports data rates up to 115.2 kbps, and is rated for a 0C to +70C commercial operating temperature range. An infrared transceiver is an optoelectronic interface IC that combines an infrared emitter driver and a photodiode receiver in one device, converting between electrical serial data and modulated IR light. It sits at the top of a hierarchy running from transceiver IC, to interface IC, to mixed-signal semiconductor, and it forms the physical layer of wireless short-range links such as those defined by the IrDA (Infrared Data Association) standard. Key features include an on-chip high-gain PIN diode receiver amplifier that removes the need for an external preamplifier, and an integrated decoder compatible with IrDA, HP-SIR (Hewlett-Packard Serial Infrared), 500 kHz Amplitude Shift Keying (ASK), and TV remote control protocols. The receive channel also contains a data pulse stretcher, which widens narrow received pulses so standard UARTs can reliably sample them. Architecturally, the CS8130 integrates the full optical front end and protocol decoding on a single die. The high-gain PIN amplifier directly drives the demodulator chain, improving noise immunity over discrete photodiode-plus-op-amp designs. Because all four major IR modulation standards are decoded on-chip, a single design can communicate with PDAs, printers, laptops, and consumer remote controls without hardware changes. Typical applications include IrDA serial ports on embedded systems and industrial equipment, short-range wireless data exchange between handheld instruments, IR remote-control repeaters and extenders, and set-top box or appliance front panels that must accept both data links and TV remote commands. A key design consideration is that the 2.7V to 5.5V supply range allows direct operation from a 3.0V or 5.0V rail, but the transmit LED drive current setting and optical alignment must follow the manufacturer datasheet guidance to achieve the specified link distance. This page adds value beyond the datasheet by synthesizing distributor availability, drop-in replacement strategy for this discontinued part, and practical design notes in one place.

RFQ پەیوەندی
CS8401A-IS - Dual-Channel Digital Audio Transmitter | Cirrus Logic
CS8401A-IS

CS8401A-IS - Dual-Channel Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8401A-IS is a monolithic CMOS dual-channel digital audio interface transmitter supporting AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 formats, supplied in a 24-pin SOIC package. It accepts audio and control data separately, performs multiplexing and biphase-mark encoding internally, and drives a transmission line directly or through a transformer. Its 4.5 V to 5.5 V supply range and -40°C to +85°C operating range suit industrial audio equipment. A digital audio interface transmitter converts parallel or serial source audio into a standardized digital transmission format. The CS8401A belongs to the digital audio transmitter hierarchy, combining channel multiplexing, control-data handling, line encoding, and output-driver functions in one CMOS integrated circuit. This simplifies the output stage of CD, DVD, professional-audio, broadcast, and consumer-electronics systems compared with a discrete encoder implementation. Key features include two-channel transmission, separate audio and control inputs, internal multiplex and biphase-mark encoding, and support for direct or transformer-coupled transmission lines. The device also includes power-down and reset protection with mute control. These functions allow designers to standardize digital-audio outputs while reducing external logic count and keeping the transmitter close to the system audio source. Technically, the monolithic CMOS implementation combines the digital encoding functions with an output stage designed for digital-audio transmission lines. Internal multiplexing allows two audio channels to share one encoded interface, while the biphase-mark stage provides the line coding required by the supported AES/EBU, S/PDIF, and EIAJ CP-340 formats. The CS8401A-IS is therefore not a codec or DAC; it is the interface stage that converts already-generated audio information into a transmit-ready digital stream. Typical applications include consumer digital-audio equipment, professional sound consoles, broadcast and studio signal chains, industrial instrumentation with digital audio outputs, computer multimedia equipment, and optical-disc player interfaces. The supported EIAJ CP-340 function also makes the transmitter relevant to CD-style digital-audio interfaces where that format is required. Designers should keep the CS8401A-IS close to the transmitter output and observe the manufacturer’s input, output, decoupling, and grounding recommendations. Select the transformer-coupled configuration when the connected interface requires isolation or impedance matching; use the direct-drive configuration only when its output and loading requirements suit the target cable and receiver. Confirm the interface format, clocking, control polarity, and mute behavior before releasing a PCB design. This product overview combines the manufacturer’s interface capabilities with practical package, sourcing, comparison, and replacement guidance. It also distinguishes the CS8401A transmitter from codecs and converters, helping engineers locate the CS8401A-IS datasheet, understand its 24-pin implementation, and determine whether a directly interchangeable ordering variant meets the required supply, temperature, and assembly conditions.

RFQ پەیوەندی
CS8406-IZ - 192 kHz Digital Audio Transmitter | Cirrus Logic
CS8406-IZ

CS8406-IZ - 192 kHz Digital Audio Transmitter | Cirrus Logic

Cirrus Logic CS8406-IZ is a monolithic CMOS digital audio interface transmitter with a maximum sampling rate of 192 kHz, one audio channel, and a 28-pin TSSOP package. It accepts audio and digital data, multiplexes and encodes the information, and drives the resulting digital audio signal onto a cable according to AES3, IEC60958, S/PDIF, or EIAJ CP1201 standards. A digital audio transmitter is an interface IC that converts source audio and associated digital information into a standardized serial digital-audio signal. It belongs to the digital audio transmitter category within interface ICs and audio codecs. Its primary role is to provide a standards-compatible output stage for equipment that distributes digital audio between professional, consumer, and automotive audio systems. The CS8406-IZ supports digital audio operation up to 192 kHz and provides one transmitter channel. Its CMOS implementation combines the audio input, digital-data multiplexing, standard-compliant encoding, and output-driver functions in a single monolithic device. According to the manufacturer datasheet, the supported outputs include AES3, IEC60958, S/PDIF, and EIAJ CP1201 formats, allowing the same transmitter to serve multiple digital-audio ecosystems. The verified device information identifies a 3.14 V to 5.25 V operating supply range and an industrial temperature range from -40°C to +85°C. It is offered in a 4.40 mm TSSOP-28 surface-mount package with 28 terminals. These characteristics support compact consumer-electronics and industrial audio equipment where a standardized digital-audio output is required without allocating a separate transmitter circuit for each supported protocol. Typical uses include S/PDIF and AES3 digital-audio outputs in consumer receivers, professional audio interfaces, broadcast and studio equipment, home-theater products, automotive head-unit electronics, and digital recording systems. In these systems, the IC converts parallel or serial source information into a cable-compatible digital stream while preserving channel, validity, and user-bit handling defined by the applicable transmission standard. Designers should verify the complete pin assignment, supported clocking configuration, output architecture, and external component requirements in the manufacturer datasheet before layout. The 28-pin TSSOP-28 footprint should be treated as the mechanical baseline, and supply decoupling and output routing should follow the datasheet's recommended application circuit to avoid signal-integrity problems. This page consolidates the verified CS8406-IZ electrical, environmental, packaging, protocol, purchasing, and replacement information. It also distinguishes documented same-package family options from unsupported cross-package substitutes and provides practical implementation guidance beyond a distributor listing.

RFQ پەیوەندی
CS8416-CSZ 192kHz 8-Channel Audio Receiver | Cirrus Logic
CS8416-CSZ

CS8416-CSZ 192kHz 8-Channel Audio Receiver | Cirrus Logic

Cirrus Logic CS8416-CSZ is a monolithic CMOS digital audio interface receiver for decoding one of eight stereo pairs according to the IEC60958, S/PDIF, EIAJ CP1201, or AES3 standards. The receiver supports digital audio operation up to 192 kHz and is packaged in a 28-pin SOIC. A digital audio interface receiver is an interface IC that converts a standardized serial digital-audio stream into a parallel PCM representation suitable for a downstream audio converter or digital signal processor. In the product hierarchy, the CS8416 is a digital audio receiver within an audio interface IC, a system-level audio codec interface, and ultimately a semiconductor component used in professional and consumer audio equipment. The principal feature of the CS8416 is its ability to select and decode one of eight stereo digital-audio inputs. Its support for IEC60958, S/PDIF, EIAJ CP1201, and AES3 allows one receiver design to cover several established digital-audio interfaces. The manufacturer describes the device as a 192 kHz digital audio interface receiver, while distributor records identify the CS8416-CSZ as an eight-channel, 28-SOIC audio receiver. The CS8416 also integrates a control interface for configuration. A distributor product record describes the device family as supporting 80-bit I2C or SPI control, operating with 3.3 V and 5 V supply levels, and drawing 11.8 mA under the stated operating condition. These characteristics place the part in the category of configurable digital-audio receiver ICs rather than a simple fixed-format line receiver. Typical applications include multichannel digital-audio routing, surround-sound receiver front ends, professional audio equipment, digital mixing consoles, set-top and television audio interfaces, and other systems that must recover PCM audio from S/PDIF or AES3 sources. The eight-input architecture is particularly useful when a product must accept multiple digital sources while presenting a common local output interface to an audio processor. Circuit implementation requires correct treatment of the digital clock, serial data, control bus, and analog supply domains. The exact pin assignments, supported control modes, channel-selection behavior, electrical limits, and decoupling requirements should be taken directly from the manufacturer datasheet rather than inferred from the family-level product descriptions. This product page consolidates the verified manufacturer and distributor facts for the CS8416-CSZ, distinguishes the SOIC-28 version from the 28-TSSOP CS8416-CZZ, and provides application guidance and comparison context focused on board-level replacement decisions.

RFQ پەیوەندی
CS8416-CZZ - 192kHz Digital Audio Receiver | Cirrus Logic
CS8416-CZZ

CS8416-CZZ - 192kHz Digital Audio Receiver | Cirrus Logic

Cirrus Logic CS8416-CZZ is a 192 kHz digital audio interface receiver with an 8:2 input multiplexer, support for up to eight stereo input channels, and three general-purpose output pins in a 28-pin TSSOP package. The monolithic CMOS receiver decodes IEC60958, S/PDIF, EIAJ CP1201, and AES3 digital-audio streams. A digital audio interface receiver is a specialized interface IC that converts serialized digital-audio signals into internal parallel data and clock information. It sits within the broader interface-IC hierarchy and supports consumer and professional audio systems that need reliable recovery of digital audio from optical, coaxial, or balanced digital connections. The CS8416 supports both single- and dual-channel digital-audio configurations. Key features include operation up to 192 kHz, an 8:2 input multiplexer, support for eight stereo input pairs, three routable general-purpose outputs, and extremely low jitter of 200 ps. These characteristics make the receiver useful in high-resolution audio equipment, professional recording systems, home-theater products, digital mixers, and multi-zone audio installations where accurate timing and flexible input selection are important. The CS8416 is implemented as a monolithic CMOS device. Its receiver architecture is designed for professional digital-audio standards, including IEC60958, S/PDIF, EIAJ CP1201, and AES3. The 8:2 multiplexer allows a system to select among multiple digital sources while preserving a common downstream audio-processing architecture. The 200 ps jitter specification is particularly valuable when downstream converters require precise word-clock recovery. Typical applications include professional digital consoles, surround-sound receivers, multi-channel recording equipment, digital audio routers, optical or coaxial audio input modules, and premium consumer audio products. The three general-purpose output pins provide additional signal routing options, while the broad input selection simplifies boards that accept several digital-audio sources. PCB design should treat the digital-audio interface as a high-speed, timing-sensitive connection. Keep the receiver close to the incoming digital-audio connector, maintain a continuous return path for each differential input, and route clock and data traces away from switching-power and motor-control nodes. Use the manufacturer pin-description table when assigning connector, supply, ground, clock, and output connections. This product record combines the manufacturer interface overview with engineering guidance on multiplexing, jitter-sensitive routing, input integration, and PCB implementation. It also identifies the relevant package constraints and clarifies where replacement decisions require additional pin-level and qualification review.

RFQ پەیوەندی