EPM5192LI - 192-Macrocell MAX 5000 CPLD 40MHz 5V | Altera
Référence : EPM5192LI ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.4 | $5 700,00 |
| 1 000 | $9.75 | $9 750,00 |
EPM5192LI Présentation
A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic IC that combines multiple PAL/GAL-like macrocell arrays with a central interconnect matrix, providing deterministic timing, low power, and instant-on behavior. CPLDs sit in the programmable-logic hierarchy between small SPLDs (PAL/GAL) and large FPGAs, and are typically used for glue logic, bus decoding, address mapping, and control-state machines where predictable propagation delay is critical.
Key features of the EPM5192LI include 192 macrocells organized into 12 interconnected Logic Array Blocks (LABs), 7 dedicated inputs, 72 total inputs, and 64 user I/O lines. The device offers a propagation delay of 55 ns and is built on a CMOS process with EPROM (UV-erasable) non-volatile elements, allowing repeated programming during development. The 'I' suffix denotes the industrial operating-temperature range.
Architecturally, the MAX 5000 series uses a programmable AND/OR array with a global interconnect that ties each LAB to the device pins. This produces fixed pin-to-pin timing regardless of how the logic is fitted - a defining advantage over SRAM-based FPGAs for timing-critical control paths. The EPROM cells retain configuration indefinitely with the package window covered, eliminating the need for a separate boot memory.
Typical applications include legacy industrial controllers, telecom interface glue logic, military/aerospace systems (in the JM/883 screened variant), and replacement designs for obsolete board-level decode logic. The 84-pin PQCC package offers a JEDEC-standard land pattern that simplifies second-sourcing across vendors.
When designing with this device, account for the 55 ns propagation delay in worst-case timing budgets and provide a stable 5V rail with adequate bulk decoupling. For new designs, consider migrating to a MAX II or MAX V CPLD for lower power, faster I/O, and longer-term availability.
This page synthesizes distributor stock signals, parametric alternatives, and practical design guidance for the EPM5192LI that goes beyond the legacy datasheet summary.
Alternatives de remplacement direct pour EPM5192LI — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EPM5192LI (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Device Type, RoHS Status, Technology.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EPM5192LC84
✅ Remplacement direct✓ En stock
$15.95 / unité
Voir la fiche technique →EPM5192LC84-1
✅ Remplacement direct✓ En stock
$21.85 / unité
Voir la fiche technique →EPM5192LC84-2
✅ Remplacement direct✓ En stock
$7.1 / unité
Voir la fiche technique →EPM5192JC84-1
✅ Remplacement direct✓ En stock
$15.2 / unité
Voir la fiche technique →EPM5192GC84-1
✅ Remplacement direct✓ En stock
$14.2 / unité
Voir la fiche technique →EPM5192LI Valeurs maximales et caractéristiques électriques
| Device Family | MAX 5000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 192 |
| Usable Gates | 3,750 |
| Logic Array Blocks (LABs) | 12 |
| Maximum Operating Frequency | 40 MHz |
| Propagation Delay (tPD) | 55 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V |
| Technology | CMOS, UV-erasable EPROM |
| Dedicated Inputs | 7 |
| Total Inputs | 72 |
| User I/O Pins | 64 |
| Boîtier | 84-pin PQCC (J84) |
| JEDEC Package Code | S-PQCC-J84 |
| Plage de température de fonctionnement | Industrial (-40C to +85C) |
| Type de montage | Surface Mount |
| Statut RoHS | unknown |
Configuration des broches de EPM5192LI
| Broche 1 | I/O — User I/O pin |
| Broche 2 | I/O — User I/O pin |
| Broche 3 | I/O — User I/O pin |
| Broche 4 | I/O — User I/O pin |
| Broche 5 | I/O — User I/O pin |
| Broche 6 | I/O — User I/O pin |
| Broche 7 | I/O — User I/O pin |
| Broche 8 | I/O — User I/O pin |
| Broche 9 | I/O — User I/O pin |
| Broche 10 | I/O — User I/O pin |
| Broche 11 | GND — Ground |
| Broche 12 | I/O — User I/O pin |
| Broche 13 | I/O — User I/O pin |
| Broche 14 | I/O — User I/O pin |
| Broche 15 | I/O — User I/O pin |
| Broche 16 | I/O — User I/O pin |
| Broche 17 | I/O — User I/O pin |
| Broche 18 | I/O — User I/O pin |
| Broche 19 | I/O — User I/O pin |
| Broche 20 | I/O — User I/O pin |
| Broche 21 | I/O — User I/O pin |
| Broche 22 | GND — Ground |
| Broche 23 | I/O — User I/O pin |
| Broche 24 | I/O — User I/O pin |
| Broche 25 | I/O — User I/O pin |
| Broche 26 | I/O — User I/O pin |
| Broche 27 | I/O — User I/O pin |
| Broche 28 | I/O — User I/O pin |
| Broche 29 | I/O — User I/O pin |
| Broche 30 | I/O — User I/O pin |
| Broche 31 | I/O — User I/O pin |
| Broche 32 | I/O — User I/O pin |
| Broche 33 | GND — Ground |
| Broche 34 | I/O — User I/O pin |
| Broche 35 | I/O — User I/O pin |
| Broche 36 | I/O — User I/O pin |
| Broche 37 | I/O — User I/O pin |
| Broche 38 | I/O — User I/O pin |
| Broche 39 | I/O — User I/O pin |
| Broche 40 | I/O — User I/O pin |
| Broche 41 | I/O — User I/O pin |
| Broche 42 | I/O — User I/O pin |
| Broche 43 | I/O — User I/O pin |
| Broche 44 | GND — Ground |
| Broche 45 | I/O — User I/O pin |
| Broche 46 | I/O — User I/O pin |
| Broche 47 | I/O — User I/O pin |
| Broche 48 | I/O — User I/O pin |
| Broche 49 | I/O — User I/O pin |
| Broche 50 | I/O — User I/O pin |
| Broche 51 | I/O — User I/O pin |
| Broche 52 | I/O — User I/O pin |
| Broche 53 | I/O — User I/O pin |
| Broche 54 | I/O — User I/O pin |
| Broche 55 | GND — Ground |
| Broche 56 | I/O — User I/O pin |
| Broche 57 | I/O — User I/O pin |
| Broche 58 | I/O — User I/O pin |
| Broche 59 | I/O — User I/O pin |
| Broche 60 | I/O — User I/O pin |
| Broche 61 | I/O — User I/O pin |
| Broche 62 | I/O — User I/O pin |
| Broche 63 | I/O — User I/O pin |
| Broche 64 | I/O — User I/O pin |
| Broche 65 | I/O — User I/O pin |
| Broche 66 | GND — Ground |
| Broche 67 | I/O — User I/O pin |
| Broche 68 | I/O — User I/O pin |
| Broche 69 | I/O — User I/O pin |
| Broche 70 | I/O — User I/O pin |
| Broche 71 | I/O — User I/O pin |
| Broche 72 | I/O — User I/O pin |
| Broche 73 | I/O — User I/O pin |
| Broche 74 | I/O — User I/O pin |
| Broche 75 | I/O — User I/O pin |
| Broche 76 | I/O — User I/O pin |
| Broche 77 | GND — Ground |
| Broche 78 | I/O — User I/O pin |
| Broche 79 | I/O — User I/O pin |
| Broche 80 | I/O — User I/O pin |
| Broche 81 | I/O — User I/O pin |
| Broche 82 | I/O — User I/O pin |
| Broche 83 | I/O — User I/O pin |
| Broche 84 | VCC — +5V supply |
Applications typiques
EPM5192LI convient pour 6 applications: Legacy Industrial Control Glue Logic, Telecom Backplane Address Decoding, Military/Aerospace Replacement Boards, VMEbus / Multibus Interface Logic, Replacing Discrete 74-Series Logic Stacks, Long-Life Cycle Sustaining Engineering.
Legacy Industrial Control Glue Logic
The EPM5192LI's 192 macrocells and 55 ns deterministic propagation delay make it ideal for replacing stacks of 74LS/74F-series glue logic in legacy industrial controllers. Its non-volatile UV-EPROM configuration means instant-on behavior on power-up with no boot PROM, which is critical for deterministic machine start-up sequences. The 64 user I/O pins handle address decoding, chip-select generation, and interrupt steering in PLC backplanes. Industrial temperature grade (-40C to +85C) and 5V tolerance match the noisy 24V-isolated supply rails common in factory-floor PLCs. Engineers should plan a migration path to MAX II (EPM240/EPM570) for new designs to avoid future obsolescence.
Recommandé
Telecom Backplane Address Decoding
The EPM5192LI's 12 Logic Array Blocks and deterministic tPD are well-suited to multi-drop backplane address decoding in legacy telecom shelves. Its 7 dedicated inputs and 72 total inputs allow fan-in from many address/data lines without external buffering, while 64 I/O pins drive chip-select outputs to memory banks and peripheral ASICs. The 5V-only supply integrates cleanly with the TTL-era backplane transceivers still found in installed central-office equipment. The 40 MHz toggle rate comfortably covers 8 MHz VMEbus and 16 MHz Multibus timing budgets. For new builds, the MAX V 5M160ZE64 offers pin-compatible modernization in a smaller QFP package.
Recommandé
Military/Aerospace Replacement Boards
When EOL boards must be reproduced exactly for military and aerospace customers, the EPM5192LI is the plastic industrial-temp counterpart to the Mil-Std-883-screened EPM5192JM/883B. Both share the 192-macrocell die, so verified JEDEC timing models and vector patterns remain valid. The PQCC plastic package suits non-space-flight ground systems, training simulators, and depot-level spares. For flight hardware, designers must step up to the JM/883B variant regardless, since plastic parts are not on the QML/QPL list. Always confirm derating against the system's required operating-temperature envelope before reuse.
Recommandé
VMEbus / Multibus Interface Logic
The EPM5192LI provides the bus arbitration, address latching, and DTACK generation required for legacy VMEbus (VME64) and Multibus interface cards. Its 55 ns propagation delay fits comfortably within the VMEbus 40 ns DTACK timing budget when paired with a single wait state, and its 192 macrocells can host the entire bus-state machine plus interrupt controller. The 84-pin PQCC package places all major bus signals on dedicated pins, simplifying PCB routing on 6U Eurocards. Industrial temperature grade ensures operation in unconditioned telecom shelters and industrial enclosures without derating.
Recommandé
Replacing Discrete 74-Series Logic Stacks
The EPM5192LI was specifically designed to consolidate dozens of 74LS/74F/74ALS TTL packages into a single programmable device, simplifying board layout, reducing power, and improving reliability. Its 192 macrocells replace roughly 30-50 equivalent 20-pin MSI packages, while its 5V I/O is directly TTL-compatible without level shifters. The deterministic 55 ns timing lets designers replace asynchronous state machines without re-validating race conditions. For modern designs, consider MAX II or MAX V CPLDs, which provide lower power (lower ICC), JTAG boundary-scan, and in-system programmability.
Recommandé
Long-Life Cycle Sustaining Engineering
Medical, defense, and industrial-automation systems with 15-25 year field-life requirements still depend on the EPM5192LI for sustaining-engineering spares. Its obsolete but well-documented architecture allows field-replaceable units to be built, tested, and qualified using the original design files and verification vectors. Independent distributors maintain tested, traceable inventory specifically for these programs. Lifecycle planners should still evaluate MAX V as a second-source on a parallel PCB revision, in case future EOL notices on the EPM5192LI tighten further.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EPM5192LI — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EPM5192LC84 | EPM5192LC84-1 | EPM5192LC84-2 | EPM5192JC84-1 | EPM5192GC84-1 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 84-pin PQCC (J84) | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same | 84-pin PQCC (J84) - same |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 |
| Operating Temperature | -40C to +85C (Industrial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) |
| Supply Voltage | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V | 4.5V to 5.5V |
| Logic Array Blocks | 12 | 12 | 12 | 12 | 12 | 12 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 | 64 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Principaux différenciateurs
- Industrial temperature grade for harsh environments (vs EPM5192LC84)
- Plastic PQCC package for cost-sensitive industrial designs (vs EPM5192JM/883B)
- Non-volatile UV-EPROM configuration for instant-on (vs EPM240T100C5N (MAX II))
Notes de conception
The EPM5192LI draws ICC in the 200-400 mA range during DC operation (programming current is much higher). Provide a 5V rail with at least 100 uF of bulk decoupling plus a 0.1 uF ceramic cap within 25 mm of the VCC/GND pins. The 5V supply must be monotonic and stay within 4.5V-5.5V during power-up, or EPROM cells may program incorrectly. Add a power-on-reset supervisor if the upstream 5V regulator has soft start-up.
The 84-pin PQCC package has a theta_JA of approximately 35 C/W in still air. At industrial temperature, derate ICC by 1.5 mA per C above 70C. Avoid placing the device near high-power dissipation components; the EPROM quartz window (if present) is sensitive to sustained thermal gradients. For conformal-coated boards, ensure the coating does not insulate the J84 thermal pad area.
Do not confuse the EPM5192LI (plastic PQCC industrial) with the EPM5192JM/883B (ceramic JLCC Mil-Std-883). They share the same die but different packages - they are NOT drop-in. Also, MAX 5000 devices use a 5V-only programming algorithm; using a MAX II or MAX V programmer will damage the part. Finally, the device is obsolete: for new designs, use EPM240T100C5N (MAX II) or 5M80ZE64C5N (MAX V) instead.
With a 55 ns propagation delay, the EPM5192LI has roughly 8 ns of setup margin in a 40 MHz synchronous design. Keep output traces under 50 mm to avoid ringing on the TTL-level outputs, and add 22-33 ohm series damping on heavily-loaded address/data buses. For address-decode applications, place the CPLD close to the memory/ASIC chip-select pins to minimize stub length and reflection.
Informations de conformité
The EPM5192LI is a legacy 1990s-era Altera product. RoHS/REACH compliance status is not documented on the official Intel/ALTERA product page (the part is obsolete). The plastic PQCC package likely contains lead-based solder; customers requiring RoHS-compliant assemblies should evaluate the EPM5192AQI100 or MAX V 5M160ZE64C5N as modern alternatives.
