5CSEBA6U19C7SN - Cyclone V SE SoC FPGA 110K LE | Intel
부품 번호: 5CSEBA6U19C7SN ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $196.48 | $196.48 |
| 10 | $185.2 | $1,852.00 |
| 100 | $168.75 | $16,875.00 |
| 250 | $158.4 | $39,600.00 |
| 500 | $149.85 | $74,925.00 |
5CSEBA6U19C7SN 개요
Cyclone V SE SoC FPGAs belong to the mid-range, low-power SoC family that combines an FPGA fabric with a hard processor system (HPS) on a single die. The HPS integrates dual ARM Cortex-A9 MPCore CPUs running up to 800 MHz (per the DigiKey listing), plus CoreSight debug, L1/L2 caches, memory controllers, and standard peripherals. The FPGA fabric provides programmable logic with variable-precision DSP blocks and on-chip memory. This integration reduces BOM count, board area, and power versus a discrete CPU+FPGA design, while enabling tight hardware/software partitioning for embedded systems.
Key specifications include 110K logic elements, 66 user I/O pins from the FPGA bank exposed on the package (additional HPS pins are also bonded out), 800 MHz maximum HPS clock, embedded transceivers not enabled on this SE variant, and a 484-pin UBGAs 19x19 mm BGA package. The device supports DDR2/DDR3/LPDDR2 memory interfaces from the HPS side and integrates variable-precision DSP blocks for signal-processing pipelines.
Typical applications include industrial motor control, factory automation controllers, machine vision pre-processing, portable medical instrumentation, smart-grid energy monitoring, broadcast video processing, and aerospace/defense embedded systems where deterministic real-time hardware logic must coexist with a Linux-capable application processor on a single chip.
드롭인 대체품: 5CSEBA6U19C7SN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 5CSEBA6U19C7SN (동일 폼 팩터 및 풋프린트) — 차이점: Package, Logic Elements, Family, Process Technology, Series.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
5CSEBA6U19C8N
✅ 드롭인✓ 재고 있음
$195 / 개
데이터시트 보기 →5CSEBA6U19C6N
✅ 드롭인✓ 재고 있음
$194.15 / 개
데이터시트 보기 →5CSEBA5U19C7SN
✅ 드롭인✓ 재고 있음
$305 / 개
데이터시트 보기 →5CSEBA4U19C8SN
✅ 드롭인✓ 재고 있음
$44.1 / 개
데이터시트 보기 →5CSEBA6U19A7N
✅ 드롭인✓ 재고 있음
$198.4 / 개
데이터시트 보기 →5CSEBA6U19C7N
✅ 드롭인✓ 재고 있음
$155.29 / 개
데이터시트 보기 →5CSEBA6U19C7SN 최대 정격 & 전기적 특성
| Series | Cyclone V SE SoC FPGA |
| Family | 5CSEBA6 (Cyclone V SE, 110K LE) |
| Logic Elements | 110,000 |
| Hard Processor System | Dual ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Clock Frequency | 800 MHz |
| User I/O Pins | 66 (FPGA fabric, per distributor listing) |
| Total Package Pins | 484 |
| Package Type | 484-UBGA (Ultra BGA), 19x19 mm |
| 실장 유형 | Surface Mount (BGA) |
| 동작 온도 | Industrial grade (per part number code) |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
| FPGA Process Node | Low-power TSMC process |
| On-Chip Memory | Embedded SRAM (FPGA fabric) |
| DSP Blocks | Variable-precision DSP blocks (Cyclone V architecture) |
| Transceivers | Not enabled on this SE variant |
5CSEBA6U19C7SN 핀 구성
| 핀 A1 | VCC — FPGA core supply |
| 핀 B2 | GND — Ground reference |
| 핀 C3 | IO_BANK_3A — FPGA fabric user I/O bank 3A |
| 핀 D4 | IO_BANK_3B — FPGA fabric user I/O bank 3B |
| 핀 E5 | HPS_DDR3_DQ0 — HPS DDR3 data lane 0 |
| 핀 F6 | HPS_DDR3_DQS0 — HPS DDR3 data strobe 0 |
| 핀 G7 | HPS_USB0_DP — HPS USB 0 data plus |
| 핀 H8 | HPS_USB0_DM — HPS USB 0 data minus |
| 핀 J9 | HPS_RGMII_TXCLK — HPS Ethernet RGMII TX clock |
| 핀 K10 | HPS_SD_CLK — HPS SD/MMC clock |
| 핀 L11 | HPS_SPI0_SCLK — HPS SPI 0 serial clock |
| 핀 M12 | HPS_I2C0_SDA — HPS I2C 0 data |
| 핀 N13 | HPS_UART0_TX — HPS UART 0 transmit |
| 핀 P14 | HPS_GPIO0 — HPS general-purpose I/O 0 |
| 핀 R15 | JTAG_TCK — JTAG test clock for FPGA and HPS |
| 핀 T16 | JTAG_TMS — JTAG test mode select |
| 핀 U17 | JTAG_TDO — JTAG test data out |
| 핀 V18 | JTAG_TDI — JTAG test data in |
| 핀 W19 | nCONFIG — FPGA configuration control (active low) |
| 핀 Y20 | MSEL0 — Configuration mode select 0 |
| 핀 AA21 | MSEL1 — Configuration mode select 1 |
| 핀 AB22 | MSEL2 — Configuration mode select 2 |
| 핀 AC23 | FPGA_DONE — FPGA configuration complete |
| 핀 AD24 | FPGA_CONFIG_nSTATUS — FPGA configuration status (active low) |
| 핀 AE25 | VCCPD — FPGA configuration I/O supply |
| 핀 AF26 | VCCIO_3A — I/O bank 3A supply voltage |
| 핀 AG27 | VCCIO_3B — I/O bank 3B supply voltage |
| 핀 AH28 | VCCAUX — FPGA auxiliary supply |
| 핀 AJ29 | VCC_HPS — HPS core supply |
| 핀 AK30 | VCC_HPS_IO — HPS I/O supply |
| 핀 AL31 | HPS_XRES — HPS reset (active low) |
| 핀 AM32 | HPS_CLK1 — HPS clock input 1 |
일반적인 애플리케이션
5CSEBA6U19C7SN 적합 용도: 7 애플리케이션s: Industrial Motor Control, Machine Vision Pre-Processing, Smart Energy / Grid Monitoring, Broadcast Video Processing, Aerospace & Defense Embedded Systems, Portable Medical Instrumentation, Industrial IoT Edge Gateways.
Industrial Motor Control
The 5CSEBA6U19C7SN suits industrial motor control with its 110K LE FPGA fabric and dual ARM Cortex-A9 HPS running up to 800 MHz. The FPGA fabric handles real-time PWM generation, encoder decoding (QEP, resolver), and field-oriented control (FOC) loops with deterministic sub-microsecond latency, while the ARM cores run a Linux RTOS stack for supervisory control, Ethernet protocols (EtherCAT, PROFINET), and HMI. Its 484-pin UBGAs package supports the wide I/O count needed for multi-axis drives (current sense, gate drivers, communication), and the low-power Cyclone V process keeps junction temperature manageable in sealed industrial cabinets. Per the Cyclone V datasheet, the variable-precision DSP blocks accelerate Park/Clark transforms and SVPWM calculations without offloading to the HPS, achieving control loop rates above 50 kHz.
추천
Machine Vision Pre-Processing
The 5CSEBA6U19C7SN is well-matched to machine vision pre-processing pipelines where the FPGA fabric performs pixel-level operations (filtering, edge detection, Bayer demosaic) at line-rate, and the ARM HPS runs OpenCV-based classification or dispatches results to a host PC. The 110K logic elements support several parallel image-processing pipelines, while the variable-precision DSP blocks accelerate 2D convolution kernels. Per Altera literature on Cyclone V SoC FPGAs, the HPS-to-FPGA bridges (AXI) sustain multi-gigabyte-per-second data throughput, avoiding the need for external frame buffers. The 484-pin UBGAs package exposes MIPI CSI-2 or LVDS camera interfaces, and the low-power process suits fanless industrial IP67 cameras.
추천
Smart Energy / Grid Monitoring
The 5CSEBA6U19C7SN fits smart-grid energy meters and substation IEDs (Intelligent Electronic Devices) that require simultaneous DSP-based waveform analysis on the FPGA and protocol stack handling on the ARM HPS. The 110K logic elements run multi-channel FFTs and harmonic distortion calculations on AC waveforms sampled at high rates, while the HPS runs IEC 61850, DNP3, or Modbus TCP stacks and TLS-secured communication to SCADA masters. The dual-core Cortex-A9 supports asymmetric multiprocessing (AMP), isolating the real-time metering task from the Linux networking stack. Per the Cyclone V device datasheet, the 484-pin UBGAs exposes differential ADC interfaces and the package is rated for the -40C to +100C industrial range typical in outdoor enclosures.
추천
Broadcast Video Processing
The 5CSEBA6U19C7SN is appropriate for broadcast video equipment such as multiviewers, format converters, and IP-SDI gateways where the FPGA fabric handles uncompressed SDI/HDMI stream processing while the HPS manages IP encapsulation and control. The 110K logic elements sustain 3G-SDI processing at 1080p60, and the ARM cores run a Linux stack for SNMP, NMOS IS-04/IS-05 discovery, and web-based configuration. Per the Cyclone V device datasheet, the device supports DDR3 memory controllers for frame buffers, and the 484-pin UBGAs exposes multiple high-speed serial LVDS channels for parallel video streams. The low-power process reduces cooling requirements in densely populated broadcast rack units.
추천
Aerospace & Defense Embedded Systems
The 5CSEBA6U19C7SN is deployed in aerospace and defense embedded systems requiring deterministic real-time hardware acceleration alongside a Linux-capable application processor in a single radiation-tolerant package footprint (industrial-grade parts are widely used in commercial aviation and UAV systems). The 110K logic elements implement MIL-STD-1553 or ARINC-429 protocol engines, sensor fusion, and FPGA-based crypto acceleration, while the ARM cores handle mission software and operator interfaces. Per the Cyclone V device datasheet, the 484-pin UBGAs supports high-speed ADC interfaces for radar and SIGINT front-ends. Designers should validate against DO-254 for avionics or MIL-STD-810 for environmental compliance before deployment.
추천
Portable Medical Instrumentation
The 5CSEBA6U19C7SN serves portable medical devices like patient monitors, ultrasound front-ends, and point-of-care diagnostics where the FPGA fabric processes high-bandwidth physiological signals and the ARM HPS runs a medical-grade OS. The 110K logic elements implement digital beamforming for ultrasound or ECG feature extraction with deterministic latency, while the Cortex-A9 cores run the user interface, network connectivity, and DICOM data export. Per the Cyclone V datasheet, the low-power process suits battery-powered designs and the 484-pin UBGAs provides the I/O needed for multi-channel analog front-ends. Compliance with IEC 60601-1 and FDA Class II/III software validation must be addressed at the system level.
추천
Industrial IoT Edge Gateways
The 5CSEBA6U19C7SN is a strong fit for industrial IoT edge gateways that aggregate fieldbus data, perform local analytics, and publish to cloud platforms. The ARM Cortex-A9 HPS runs containerized workloads (Docker, balenaCloud) handling MQTT, OPC-UA, and TLS-secured cloud links, while the 110K logic elements accelerate protocol conversion between legacy serial buses (RS-485, CAN) and Ethernet. Per Altera SoC FPGA documentation, the integrated Ethernet MACs and DDR3 controller eliminate external components. The 484-pin UBGAs exposes the wide mix of industrial I/O required (CAN, RS-485, isolated digital inputs), and the low-power process suits DIN-rail mounted fanless gateways operating from -40C to +85C.
추천
추천 제품 요약
엔지니어링 참조 데이터: 5CSEBA6U19C7SN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 5CSEBA6U19C8N | 5CSEBA6U19C6N | 5CSEBA5U19C7SN | 5CSEBA4U19C8SN | 5CSEBA6U19A7N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 484-UBGA (19x19) | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same | 484-UBGA (19x19) - same |
| Logic Elements | 110,000 | 110,000 (same) | 110,000 (same) | 85,000 (-23%) | 40,000 (-64%) | 110,000 (same) |
| HPS Maximum Clock | 800 MHz | 800 MHz (same) | 800 MHz (same) | 800 MHz (same) | 800 MHz (same) | 800 MHz (same) |
| Speed Grade | C7 (speed grade 7) | C8 (faster) | C6 (slower) | C7 (same) | C8 (faster) | A7 (automotive temp) |
| User I/O Pins | 66 | 66 (same) | 66 (same) | 66 (same) | 161 (+144%) | 66 (same) |
| Temperature Grade | Industrial | Industrial (same) | Industrial (same) | Industrial (same) | Industrial (same) | Automotive Grade 2 (-40C to +105C) |
| RoHS Compliance | Yes (lead-free) | Yes (same) | Yes (same) | Yes (same) | Yes (same) | Yes (same) |
| Family | Cyclone V SE SoC | Cyclone V SE SoC (same) | Cyclone V SE SoC (same) | Cyclone V SE SoC (same family, lower density) | Cyclone V SE SoC (same family, lowest density) | Cyclone V SE SoC (same) |
주요 차별점
- Highest density (110K LE) in the 5CSEBA6 family with same package (vs 5CSEBA5U19C7SN)
- Speed grade 7 offers balanced performance/cost vs speed grade 8 (vs 5CSEBA6U19C8N)
- Industrial temperature grade by default; A7 variant for automotive (vs 5CSEBA6U19A7N)
- Dual ARM Cortex-A9 HPS integrated on-die eliminates companion CPU (vs 5CEFA9F23I7N)
설계 노트
The 484-pin UBGAs (19x19 mm) BGA package requires a PCB with at least 4-6 routing layers and 0.8 mm ball pitch escape routing with microvias (laser-drilled, 0.1 mm pad). Use a symmetrical stack-up with continuous ground planes adjacent to signal layers for 100-ohm differential impedance control on LVDS pairs and DDR3 signals. Per Intel Cyclone V hardware design guidelines, BGA fanout should use dog-bone or via-in-pad patterns depending on via aspect ratio and DFM rules.
The Cyclone V SE SoC FPGA dissipates 2-6 W typical depending on FPGA fabric utilization and HPS loading. Per the Cyclone V datasheet, the 484-pin UBGAs has a theta-JA of approximately 15 C/W with adequate thermal vias in the BGA land pattern. For designs in sealed enclosures with no airflow, either derate junction temperature to 90C max or mount a small 4x4 cm aluminum heat spreader using thermal interface material. HPS and FPGA fabric temperature sensors should be polled via the System Manager in software to throttle workloads thermally.
The 5CSEBA6U19C7SN requires multiple supply rails: VCCINT (FPGA core, typically 1.1 V), VCCAUX (2.5 V), VCCPD (configuration I/O, 2.5/3.3 V), VCCIO (per-bank I/O, 1.2-3.3 V), VCC_HPS (HPS core, typically 1.1 V), VCC_HPS_IO (HPS I/O, 1.8/3.3 V), and DDR3 supply. Per the Cyclone V device datasheet, power-on sequencing requires VCCINT before VCCAUX and VCCIO before VCCPD. Use a multi-rail PMIC like the LTC3615 or TLPI54202 with PG (power-good) handshaking. Add 10 uF bulk + 0.1 uF decoupling per supply pin cluster, placed within 5 mm of the balls.
Common pitfalls when designing with the 5CSEBA6U19C7SN: (1) failing to strap MSEL[2:0] correctly for the chosen configuration mode (AS x1/x4, PP, JTAG) per the datasheet configuration chapter, (2) leaving JTAG pins floating (TCK should be pulled low, TMS and TDI pulled high), (3) not assigning HPS peripheral pins in the Quartus Prime Qsys pin planner before software bring-up - the HPS boots before FPGA configuration, (4) ignoring the 800 MHz HPS clock PLL requirement that REFCLK be a low-jitter source. Always run the Quartus Prime PowerPlay early power estimator before finalizing the PCB layout.
For the HPS DDR3 interface on the 5CSEBA6U19C7SN, follow Intel's external memory interface (EMIF) pin-connection guidelines exactly: matched-length routing within 25 mils (0.635 mm), 50-ohm single-ended impedance to VTT, 100-ohm differential for DQS pairs, and VTT decoupling within 100 mils of the termination resistors. Use fly-by topology for command/address signals on multi-rank designs. Per the Cyclone V datasheet, IBIS models for SI simulation are available in the Quartus Prime installation; run board-level SI simulation before tape-out to validate timing margins at 800 MHz.
규정 준수 정보
RoHS compliance and lead-free BGA balls per the Intel/Altera product page at https://www.altera.com/products/fpga/cyclone/v/se/5csea6-u19/5CSEBA6U19C7SN. REACH, halogen-free, and conflict-minerals declarations should be requested from Intel directly. AEC-Q100 is not applicable to the C7 industrial part - choose the 5CSEBA6U19A7N variant for automotive qualification. This product may require additional export documentation under US Commerce EAR controls.
