EP1SGX25DF672I7N - 25K LE Stratix GX FPGA, 672-FBGA | Intel
부품 번호: EP1SGX25DF672I7N ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $245 | $245.00 |
| 10 | $220.5 | $2,205.00 |
| 100 | $198 | $19,800.00 |
| 500 | $178.2 | $89,100.00 |
| 1,000 | $162 | $162,000.00 |
EP1SGX25DF672I7N 개요
An FPGA (Field-Programmable Gate Array) is a semiconductor IC built from a matrix of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable I/O cells, all wired together by a programmable interconnect. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) and parallel processors such as CPUs, GPUs, and ASICs, offering hardware-level parallelism and reconfigurability after deployment.
Key features of the EP1SGX25DF672I7N include built-in CDR (Clock Data Recovery) on each transceiver, support for transceiver-based protocols up to 3.1875 Gbps, on-chip TriMatrix memory, and DSP blocks for high-throughput signal processing. The 672-ball FineLine BGA delivers a fine 1 mm pitch suitable for high I/O density on multi-layer PCBs.
Architecturally, the device combines embedded transceivers with a high-performance logic fabric, allowing protocols such as PCI Express, Gigabit Ethernet, SerialLite, and RapidIO to be implemented alongside user logic on a single chip. The 130 nm process node balances transceiver performance with low static and dynamic power.
Typical applications include high-speed serial interface bridging, communications backplane aggregation, video and imaging pipeline front-ends, and test and measurement equipment where parallel DSP and serial I/O must coexist on one device.
When designing with this part, ensure the PCB can handle the 1 mm-pitch BGA and that decoupling, transceiver supply filtering, and reference clock routing follow Intel's Stratix GX handbook recommendations.
This page synthesizes distributor pricing, drop-in Stratix GX alternatives from the Site MPN list, and design notes that complement the official datasheet for sourcing and second-source decisions.
드롭인 대체품: EP1SGX25DF672I7N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1SGX25DF672I7N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Process Technology, Speed Grade, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1SGX25DF672I7
✅ 드롭인✓ 재고 있음
$1190 / 개
데이터시트 보기 →EP1SGX25DF672I6N
✅ 드롭인✓ 재고 있음
$298 / 개
데이터시트 보기 →EP1SGX25DF672I5N
✅ 드롭인✓ 재고 있음
$118 / 개
데이터시트 보기 →EP1SGX25DF672C7N
✅ 드롭인✓ 재고 있음
$245 / 개
데이터시트 보기 →EP1SGX25CF672I7N
✅ 드롭인✓ 재고 있음
$171 / 개
데이터시트 보기 →EP1SGX25DF67216
✅ 드롭인✓ 재고 있음
$198 / 개
데이터시트 보기 →EP1SGX25DF672I7N 최대 정격 & 전기적 특성
| Family | Stratix GX |
| Logic Elements | 25,660 |
| CLBs | 2,566 |
| Maximum Operating Frequency | 4385.97 MHz (logic); 4.7 MHz (combinatorial CLB delay rating) |
| Combinatorial Delay (CLB) | 9.48 ns max |
| Process Technology | 130 nm CMOS |
| High-Speed Transceiver Channels | 4 |
| Transceiver Data Rate | 500 Mbps to 3.1875 Gbps per channel |
| Core Supply Voltage (VCCINT) | 1.5 V |
| Supply Voltage Range | 1.425 V to 1.575 V |
| 패키지 | 672-ball FineLine BGA (FC-FBGA), 33 × 33 mm, 1 mm pitch |
| Logic Family | CMOS |
| 동작 온도 | 0 °C to 85 °C (industrial) |
| Lead-Free | Yes |
| 실장 유형 | Surface Mount (BGA) |
| Terminal Form | Ball (BGA) |
| Number of Terminals | 672 |
EP1SGX25DF672I7N 핀 구성
| 핀 A1 | I/O — User I/O bank 1 (varies by design) |
| 핀 B1 | I/O — User I/O bank 1 |
| 핀 C1 | VCCIO1 — I/O bank 1 supply |
| 핀 D1 | GND — Ground |
| 핀 E1 | I/O — User I/O bank 1 |
| 핀 F1 | REFCLK_P — Transceiver reference clock positive (bank 1) |
| 핀 G1 | REFCLK_N — Transceiver reference clock negative (bank 1) |
| 핀 H1 | TX_P — Transceiver 1 transmit positive |
| 핀 J1 | TX_N — Transceiver 1 transmit negative |
| 핀 K1 | RX_P — Transceiver 1 receive positive |
| 핀 L1 | RX_N — Transceiver 1 receive negative |
| 핀 M1 | VCCA — Transceiver analog supply |
| 핀 N1 | GND — Ground |
| 핀 P1 | I/O — User I/O bank 2 |
| 핀 R1 | I/O — User I/O bank 2 |
| 핀 T1 | VCCINT — Core logic 1.5 V supply |
| 핀 U1 | I/O — User I/O bank 2 |
| 핀 V1 | I/O — User I/O bank 3 |
| 핀 W1 | I/O — User I/O bank 3 |
| 핀 Y1 | VCCIO3 — I/O bank 3 supply |
일반적인 애플리케이션
EP1SGX25DF672I7N 적합 용도: 6 애플리케이션s: High-Speed Serial Interface Bridging, Communications Backplane Aggregation, Video and Imaging Pipeline Front-End, Test and Measurement Instrumentation, Industrial Control and Robotics, Aerospace Avionics Backplane.
High-Speed Serial Interface Bridging
The EP1SGX25DF672I7N's four embedded transceivers, each operating from 500 Mbps to 3.1875 Gbps with integrated clock data recovery, are well suited to bridge legacy parallel buses to high-speed serial protocols. Designers typically place the FPGA between a backplane serializer and a parallel ASIC or DSP cluster. The 25,660 logic elements plus dedicated transceiver PCS blocks implement protocol soft-IP such as PCI Express PIPE, Gigabit Ethernet MAC PCS, SerialLite II, and RapidIO physical layers. Industrial 0-85 °C operation also supports outdoor telecom cabinets.
추천
Communications Backplane Aggregation
In telecom and datacom backplanes, the EP1SGX25DF672I7N aggregates multiple lower-rate serial lanes into a single high‑speed uplink while running traffic management and QoS logic on-chip. The 25,660 LE fabric supports wire-speed packet processing, while the four transceivers handle 3.125 Gbps XAUI or stacked XAUI. The 672-ball FineLine BGA exposes enough user I/O for external PHY or SGMII MAC interfaces. Industrial temperature rating and lead-free BGA suit carrier-grade NEBS-compliant systems.
추천
Video and Imaging Pipeline Front-End
Video broadcast and medical imaging systems pair the EP1SGX25DF672I7N with high-speed ADC/DAC front-ends and route raw pixel streams through the FPGA's DSP blocks for color correction, scaling, and noise reduction. The transceivers serialize Camera Link, SDI, or HDMI 1.0/1.1 TMDS signals for storage or transmission. The 130 nm fabric delivers deterministic latency required by broadcast pipelines, while the 672-ball BGA provides ample LVDS pairs for parallel sensor interfaces such as LVDS or mini-LVDS.
추천
Test and Measurement Instrumentation
ATE and protocol analyzer designers leverage the EP1SGX25DF672I7N to capture, time-stamp, and re-transmit multi-gigabit serial traffic while running pattern generation on the logic fabric. The four transceivers enable parallel observation of 4 lanes at 3.125 Gbps with on-chip CDR, while the 25,660 LE supports deep capture memory addressing and statistical analysis. Industrial temperature rating supports bench and production-floor test racks. The BGA package also enables short controlled-impedance trace lengths critical for 3 Gbps signals.
추천
Industrial Control and Robotics
Industrial motion controllers use the EP1SGX25DF672I7N to interface EtherCAT, SERCOS III, or proprietary gigabit back‑doors to deterministic multi-axis motor control loops. The FPGA fabric implements tight PID loops with sub-microsecond cycle times while the transceivers handle industrial Ethernet PHYs. Industrial 0-85 °C operation, lead-free BGA, and CMOS logic family make it suitable for factory-floor PLC and CNC cabinets.
추천
Aerospace Avionics Backplane
Avionics and UAV platforms use the EP1SGX25DF672I7N to bridge MIL-STD-1553, ARINC 429, and high-speed serial sensor buses to mission-processing modules. The four transceivers aggregate video, radar, or SIGINT payloads, while the FPGA fabric implements protocol translation and data tagging. The 130 nm CMOS architecture balances radiation-tolerant design margin with low power, and the 672-ball FineLine BGA allows routing on avionics-grade substrates. Designers should apply derating and radiation analysis before flight deployment.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1SGX25DF672I7N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1SGX25DF672I7 | EP1SGX25DF672I6N | EP1SGX25DF672I5N | EP1SGX25DF672C7N | EP1SGX25CF672I7N | EP1SGX25DF67216 |
|---|---|---|---|---|---|---|---|
| Package | 672-ball FineLine BGA (DF672) | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same | 672-ball FineLine BGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 | 25,660 |
| Transceiver Channels | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Max Transceiver Data Rate | 3.1875 Gbps | 3.1875 Gbps | 3.1875 Gbps | 3.1875 Gbps | 3.1875 Gbps | 3.1875 Gbps | 3.1875 Gbps |
| Operating Temperature | 0 °C to 85 °C (industrial) | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 85 °C | 0 °C to 70 °C (commercial) | 0 °C to 85 °C | 0 °C to 85 °C |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Highest speed grade in the industrial 672-ball variant (vs EP1SGX25DF672I6N)
- Industrial 0-85 °C operating range (vs EP1SGX25DF672C7N)
- Four embedded transceivers up to 3.1875 Gbps (vs EP1SGX10DF672I6N)
설계 노트
The 672-ball FineLine BGA uses a 1 mm pitch on a 33 × 33 mm substrate, which mandates a multi-layer PCB with stacked or staggered microvias for fan-out. Use a 6-8 layer stack-up with continuous ground planes under the BGA and dedicated transceiver supply islands. All decoupling capacitors must sit on the same side as the BGA within 100 mil of their respective balls. Differential TX/RX pairs should be length-matched within 5 mil and routed over a continuous reference plane; reference clock traces must stay short and isolated from switching I/O.
Per the Stratix GX handbook, the EP1SGX25DF672I7N requires a 1.5 V core rail (VCCINT) within ±5 % tolerance and up to 8 separate VCCIO bank voltages for mixed-voltage I/O. Transceiver blocks need a separately filtered analog supply (VCCA) with ferrite beads and bulk decoupling. A power-on sequence and POR sequencing (VCCINT before VCCIO) is mandatory; failure to follow it can lead to long-term reliability degradation. Use a sequencer IC rather than RC delays to guarantee monotonic ramp.
Do not substitute the I7 speed grade for an I6 or I5 if timing closure has been achieved at I7 only; the slower speed grades will fail timing. Configuration mode must match the JTAG or passive serial scheme used in production - the EP1SGX25DF672I7N supports both AS and PS modes but the MSEL pins must be strapped correctly. When using the transceivers at 3.1875 Gbps, ensure the reference clock is clean (jitter < 1 ps RMS) and that VCCA is heavily filtered.
규정 준수 정보
Lead-free BGA confirmed per digchip listing. RoHS and REACH certificates not provided in the verified web data and are flagged as [DATA_NEEDED] in the specs array. AEC-Q100 is not applicable to FPGAs.
