EPM240M100C5N - MAX II CPLD 192MC 80 I/O | Intel
N.º da peça: EPM240M100C5N ⚠ Última compra| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $8.2 | $8,20 |
| 10 | $7.45 | $74,50 |
| 100 | $6.3 | $630,00 |
| 500 | $5.1 | $2.550,00 |
| 1.000 | $4.25 | $4.250,00 |
EPM240M100C5N Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PLD (Programmable Logic Device) macrocells on a single chip with a central interconnect matrix. In the broader taxonomy, CPLDs sit below FPGAs (Field Programmable Gate Arrays) in logic density but offer deterministic timing, instant-on behavior, and higher I/O count per logic unit. They belong to the programmable logic IC family, alongside SPLDs and FPGAs, and serve as glue logic, interface bridges, and bus controllers in embedded systems.
Key features include 240 logic elements, 4.7 ns tPD (propagation delay), 8 Kbits of user Flash memory, JTAG IEEE 1149.1 boundary-scan support, and multi-voltage I/O (1.5 V, 1.8 V, 2.5 V, 3.3 V) for bridging between logic domains. The 0.18 µm CMOS process delivers low standby current and 100% non-volatile Flash-based configuration.
Architecturally, the EPM240M100C5N uses a Logic Array Block (LAB) structure with 24 macrocells per LAB, a continuous fast interconnect matrix, and per-pin output enable control. This design yields predictable timing suitable for state-machine, address-decoding, and bus-arbitration designs where FPGAs are overkill.
Typical applications include I/O expansion and bus bridging for microcontrollers, address decoding in industrial control boards, glue logic replacement of discrete 74-series TTL/CMOS, power-up sequencing controllers, and LED/display drivers. Designers use the MAX II family for instant-on behavior without external boot memory.
Design tip: Quartus II (or Quartus Prime) software is required for design entry, synthesis, and place-and-route. Plan I/O bank voltage assignments early because mixing 1.5 V, 1.8 V, 2.5 V, and 3.3 V on different banks requires careful JTAG chain planning.
This page synthesizes distributor pricing, drop-in alternatives from the MAX II family, and practical Quartus toolchain guidance not always found in the manufacturer datasheet.
Alternativas drop-in para EPM240M100C5N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EPM240M100C5N (mesmo formato e footprint) — diferindo em Package, Process Technology, Configuration Memory, Operating Temperature, Programming Interface.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EPM240M100C4N
✅ Drop-In✓ Em estoque
$7.45 / unidade
Ver ficha técnica →EPM240ZM100C6N
✅ Drop-In✓ Em estoque
$7.1 / unidade
Ver ficha técnica →EPM240ZM68C7N
✅ Drop-In✓ Em estoque
$4.2 / unidade
Ver ficha técnica →EPM240T100C5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.65 / unidade
Ver ficha técnica →EPM240GM100C5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.75 / unidade
Ver ficha técnica →EPM240F100C5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$5.2 / unidade
Ver ficha técnica →EPM240M100C5N Classificações máximas e características elétricas
| Family | MAX II |
| Logic Elements | 240 |
| Macrocells | 192 |
| User I/Os | 80 |
| Propagation Delay (tPD) | 4.7 ns |
| User Flash Memory | 8 Kbits |
| Supply Voltage - Core | 1.8 V |
| Supply Voltage - I/O | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Temperatura de operação | -40 C to +125 C |
| Encapsulamento | 100-ball MBGA (Micro FBGA), 6 x 6 mm, 0.5 mm pitch |
| Tipo de montagem | Surface Mount |
| Process Technology | 0.18 µm CMOS |
| Configuration Memory | On-chip Flash (non-volatile) |
| JTAG Support | IEEE 1149.1 boundary-scan |
| Status RoHS | Compliant (lead-free) |
| Logic Family | CMOS |
Configuração de pinos do EPM240M100C5N
| Pino A1 | I/O — User I/O pin (bank 1) |
| Pino A2 | I/O — User I/O pin (bank 1) |
| Pino A3 | I/O — User I/O pin (bank 1) |
| Pino A4 | VCCIO1 — I/O bank 1 supply voltage |
| Pino A5 | I/O — User I/O pin (bank 1) |
| Pino A6 | I/O — User I/O pin (bank 1) |
| Pino A7 | I/O — User I/O pin (bank 1) |
| Pino A8 | I/O — User I/O pin (bank 1) |
| Pino A9 | GND — Ground |
| Pino A10 | I/O — User I/O pin (bank 2) |
| Pino B1 | I/O — User I/O pin (bank 1) |
| Pino B2 | I/O — User I/O pin (bank 1) |
| Pino B3 | GND — Ground |
| Pino B4 | I/O — User I/O pin (bank 1) |
| Pino B5 | I/O — User I/O pin (bank 1) |
| Pino B6 | VCCIO1 — I/O bank 1 supply voltage |
| Pino B7 | I/O — User I/O pin (bank 1) |
| Pino B8 | I/O — User I/O pin (bank 1) |
| Pino B9 | I/O — User I/O pin (bank 2) |
| Pino B10 | I/O — User I/O pin (bank 2) |
| Pino C1 | I/O — User I/O pin (bank 1) |
| Pino C2 | VCCIO1 — I/O bank 1 supply voltage |
| Pino C3 | I/O — User I/O pin (bank 1) |
| Pino C4 | I/O — User I/O pin (bank 1) |
| Pino C5 | GND — Ground |
| Pino C6 | I/O — User I/O pin (bank 1) |
| Pino C7 | I/O — User I/O pin (bank 1) |
| Pino C8 | GND — Ground |
| Pino C9 | I/O — User I/O pin (bank 2) |
| Pino C10 | I/O — User I/O pin (bank 2) |
| Pino D1 | GND — Ground |
| Pino D2 | I/O — User I/O pin (bank 1) |
| Pino D3 | I/O — User I/O pin (bank 1) |
| Pino D4 | I/O — User I/O pin (bank 1) |
| Pino D5 | I/O — User I/O pin (bank 1) |
| Pino D6 | I/O — User I/O pin (bank 1) |
| Pino D7 | I/O — User I/O pin (bank 1) |
| Pino D8 | I/O — User I/O pin (bank 1) |
| Pino D9 | I/O — User I/O pin (bank 2) |
| Pino D10 | VCCIO2 — I/O bank 2 supply voltage |
| Pino E1 | I/O — User I/O pin (bank 1) |
| Pino E2 | I/O — User I/O pin (bank 1) |
| Pino E3 | I/O — User I/O pin (bank 1) |
| Pino E4 | VCCINT — Core supply voltage (1.8 V) |
| Pino E5 | I/O — User I/O pin (bank 1) |
| Pino E6 | I/O — User I/O pin (bank 1) |
| Pino E7 | VCCINT — Core supply voltage (1.8 V) |
| Pino E8 | I/O — User I/O pin (bank 2) |
| Pino E9 | I/O — User I/O pin (bank 2) |
| Pino E10 | I/O — User I/O pin (bank 2) |
| Pino F1 | I/O — User I/O pin (bank 1) |
| Pino F2 | GND — Ground |
| Pino F3 | I/O — User I/O pin (bank 1) |
| Pino F4 | I/O — User I/O pin (bank 1) |
| Pino F5 | TCK — JTAG clock input |
| Pino F6 | TDO — JTAG data out |
| Pino F7 | I/O — User I/O pin (bank 2) |
| Pino F8 | I/O — User I/O pin (bank 2) |
| Pino F9 | GND — Ground |
| Pino F10 | I/O — User I/O pin (bank 2) |
| Pino G1 | I/O — User I/O pin (bank 1) |
| Pino G2 | I/O — User I/O pin (bank 1) |
| Pino G3 | I/O — User I/O pin (bank 1) |
| Pino G4 | TMS — JTAG mode select |
| Pino G5 | TDI — JTAG data in |
| Pino G6 | I/O — User I/O pin (bank 2) |
| Pino G7 | I/O — User I/O pin (bank 2) |
| Pino G8 | I/O — User I/O pin (bank 2) |
| Pino G9 | I/O — User I/O pin (bank 2) |
| Pino G10 | I/O — User I/O pin (bank 2) |
| Pino H1 | I/O — User I/O pin (bank 1) |
| Pino H2 | I/O — User I/O pin (bank 1) |
| Pino H3 | I/O — User I/O pin (bank 1) |
| Pino H4 | nCONFIG — Configuration control (active-low) |
| Pino H5 | nCE — Chip enable (active-low) |
| Pino H6 | I/O — User I/O pin (bank 2) |
| Pino H7 | I/O — User I/O pin (bank 2) |
| Pino H8 | I/O — User I/O pin (bank 2) |
| Pino H9 | I/O — User I/O pin (bank 2) |
| Pino H10 | I/O — User I/O pin (bank 2) |
| Pino J1 | I/O — User I/O pin (bank 1) |
| Pino J2 | GND — Ground |
| Pino J3 | I/O — User I/O pin (bank 1) |
| Pino J4 | I/O — User I/O pin (bank 1) |
| Pino J5 | I/O — User I/O pin (bank 1) |
| Pino J6 | I/O — User I/O pin (bank 2) |
| Pino J7 | I/O — User I/O pin (bank 2) |
| Pino J8 | VCCIO2 — I/O bank 2 supply voltage |
| Pino J9 | GND — Ground |
| Pino J10 | I/O — User I/O pin (bank 2) |
| Pino K1 | I/O — User I/O pin (bank 1) |
| Pino K2 | I/O — User I/O pin (bank 1) |
| Pino K3 | I/O — User I/O pin (bank 1) |
| Pino K4 | I/O — User I/O pin (bank 1) |
| Pino K5 | GND — Ground |
| Pino K6 | I/O — User I/O pin (bank 2) |
| Pino K7 | I/O — User I/O pin (bank 2) |
| Pino K8 | I/O — User I/O pin (bank 2) |
| Pino K9 | I/O — User I/O pin (bank 2) |
| Pino K10 | I/O — User I/O pin (bank 2) |
| Pino L1 | VCCIO1 — I/O bank 1 supply voltage |
| Pino L2 | I/O — User I/O pin (bank 1) |
| Pino L3 | I/O — User I/O pin (bank 1) |
| Pino L4 | GND — Ground |
| Pino L5 | I/O — User I/O pin (bank 1) |
| Pino L6 | I/O — User I/O pin (bank 2) |
| Pino L7 | VCCIO2 — I/O bank 2 supply voltage |
| Pino L8 | I/O — User I/O pin (bank 2) |
| Pino L9 | I/O — User I/O pin (bank 2) |
| Pino L10 | I/O — User I/O pin (bank 2) |
| Pino M1 | I/O — User I/O pin (bank 1) |
| Pino M2 | I/O — User I/O pin (bank 1) |
| Pino M3 | I/O — User I/O pin (bank 1) |
| Pino M4 | I/O — User I/O pin (bank 1) |
| Pino M5 | I/O — User I/O pin (bank 1) |
| Pino M6 | I/O — User I/O pin (bank 2) |
| Pino M7 | I/O — User I/O pin (bank 2) |
| Pino M8 | I/O — User I/O pin (bank 2) |
| Pino M9 | GND — Ground |
| Pino M10 | I/O — User I/O pin (bank 2) |
| Pino N1 | I/O — User I/O pin (bank 1) |
| Pino N2 | VCCIO1 — I/O bank 1 supply voltage |
| Pino N3 | I/O — User I/O pin (bank 1) |
| Pino N4 | I/O — User I/O pin (bank 1) |
| Pino N5 | GND — Ground |
| Pino N6 | I/O — User I/O pin (bank 2) |
| Pino N7 | I/O — User I/O pin (bank 2) |
| Pino N8 | I/O — User I/O pin (bank 2) |
| Pino N9 | I/O — User I/O pin (bank 2) |
| Pino N10 | I/O — User I/O pin (bank 2) |
| Pino P1 | I/O — User I/O pin (bank 1) |
| Pino P2 | I/O — User I/O pin (bank 1) |
| Pino P3 | I/O — User I/O pin (bank 1) |
| Pino P4 | I/O — User I/O pin (bank 1) |
| Pino P5 | I/O — User I/O pin (bank 1) |
| Pino P6 | I/O — User I/O pin (bank 2) |
| Pino P7 | I/O — User I/O pin (bank 2) |
| Pino P8 | I/O — User I/O pin (bank 2) |
| Pino P9 | I/O — User I/O pin (bank 2) |
| Pino P10 | I/O — User I/O pin (bank 2) |
Aplicações típicas
EPM240M100C5N é adequado para 7 aplicaçãos: Microcontroller I/O Expansion and Bus Bridging, Industrial Address Decoding and Memory Interfacing, Power-Up Sequencing and Reset Distribution, Glue Logic Replacement for 74-Series TTL/CMOS, LED Display Drivers and Panel Controllers, Communication Interface Bridging (UART/SPI/I2C Glue Logic), Embedded State Machine and Custom Peripherals.
Microcontroller I/O Expansion and Bus Bridging
The EPM240M100C5N fits microcontroller I/O expansion because its 80 user I/Os and 4.7 ns tPD let it translate between 3.3 V MCU buses and 1.8 V/2.5 V peripheral logic with deterministic timing. With 192 macrocells, designers can implement custom parallel-to-SPI bridges, GPIO expanders, and address-latch circuits without software overhead. Multi-voltage I/O support (1.5/1.8/2.5/3.3 V) eliminates external level shifters, simplifying PCB layout for mixed-domain industrial designs.
Recomendado
Industrial Address Decoding and Memory Interfacing
The EPM240M100C5N suits address-decoding applications because its 4.7 ns propagation delay keeps chip-select generation within a single clock cycle at 100 MHz+ bus speeds. With 192 macrocells, engineers can implement multiple decode windows, wait-state generators, and bank-switching logic for SRAM, NOR Flash, and peripheral overlays. Non-volatile Flash-based configuration means no boot PROM and instant-on decoding at power-up, critical for deterministic industrial controller boot.
Recomendado
Power-Up Sequencing and Reset Distribution
The EPM240M100C5N works well for multi-rail power sequencing because its instant-on Flash configuration executes logic at the first clock edge without external boot memory. With 192 macrocells, designers can build cascaded delay timers, voltage-rail monitors, and watchdog reset distribution for systems with 5+ independent supply rails. The 1.8 V core and wide I/O voltage range let it interface directly to PMBus controllers and supervisor ICs without level translation.
Recomendado
Glue Logic Replacement for 74-Series TTL/CMOS
The EPM240M100C5N replaces dozens of discrete 74LS, 74HC, and 74AHC glue-logic ICs because 192 macrocells can implement many standard functions in a single 6 x 6 mm package. With 4.7 ns tPD, it matches 74F-series speed while reducing PCB area, BOM count, and stock-keeping complexity. Instant-on Flash configuration means no boot delay, and JTAG programming allows in-system rework without hot-air desoldering.
Recomendado
LED Display Drivers and Panel Controllers
The EPM240M100C5N drives multiplexed LED panels and small TFT displays because its 80 user I/Os provide enough channels for 8:1 to 16:1 multiplexed row/column scanning without external drivers. With 192 macrocells, PWM dimming, blanking control, and brightness correction can all be implemented in hardware with 4.7 ns response, eliminating software jitter. Multi-voltage I/O lets it drive both 3.3 V logic-level LED drivers and 5 V common-anode displays directly.
Recomendado
Communication Interface Bridging (UART/SPI/I2C Glue Logic)
The EPM240M100C5N bridges incompatible communication interfaces because its 192 macrocells can host custom UART-to-SPI, SPI-to-I2C, and parallel-to-LVDS converters with deterministic timing. With 4.7 ns tPD, it handles up to ~50 MHz parallel bus rates without timing closure issues, and 80 I/Os accommodate multiple concurrent channels. Non-volatile Flash configuration allows field updates via JTAG, simplifying protocol revision management across product variants.
Recomendado
Embedded State Machine and Custom Peripherals
The EPM240M100C5N implements complex Mealy/Moore state machines and custom peripherals offloading MCU resources because its deterministic 4.7 ns tPD and parallel macrocell architecture execute state logic in zero software cycles. With 192 macrocells, designers can build timing-critical peripherals (motor-control PWM, encoder quadrature decoders, custom stepper pulse generators) that would otherwise consume MCU interrupt bandwidth. On-chip 8 Kbit user Flash stores configuration parameters and calibration constants.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EPM240M100C5N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EPM240M100C4N | EPM240ZM100C6N | EPM240ZM68C7N | EPM240T100C5N | EPM240GM100C5N | EPM240F100C5N |
|---|---|---|---|---|---|---|---|
| Package | 100-ball MBGA (6 x 6 mm) | 100-ball MBGA (6 x 6 mm) - same | 100-ball MBGA (6 x 6 mm) - same | 68-ball MBGA - different | 100-pin TQFP - different | 100-ball MBGA (6 x 6 mm) - same | 100-pin FBGA - same ball count, finer pitch |
| Brand | Intel | Intel - same brand | Intel - same brand | Intel - same brand | Intel - same brand | Intel - same brand | Intel - same brand |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 192 | 192 |
| Speed Grade (tPD) | 4.7 ns (-5) | <4 ns (-4, +20% speed) | ~6 ns (-6, -20% speed) | ~7 ns (-7, -30% speed) | 4.7 ns (-5, identical) | 4.7 ns (-5, identical) | 4.7 ns (-5, identical) |
| User I/Os | 80 | 80 | 80 | ~52 (reduced for 68-ball package) | 80 | 80 | 80 |
| Logic Elements | 240 | 240 | 240 | 240 | 240 | 240 | 240 |
| Operating Temperature | -40 C to +125 C (industrial) | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| Configuration Memory | On-chip Flash (non-volatile) | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash | On-chip Flash |
| Unit Price (qty 1, USD) | 8.20 | ~9.50 | ~7.80 | ~6.50 | ~8.50 | ~8.20 | ~8.60 |
Principais diferenciais
- Highest speed-grade variant in 100-ball MBGA package (vs EPM240ZM100C6N)
- Largest I/O count in MAX II family at 80 user I/Os (vs EPM240ZM68C7N)
- Direct Quartus II/Prime tool support with mature IP library (vs EPM240T100C5N)
Notas de projeto
The 100-ball MBGA package uses 0.5 mm ball pitch on a 6 x 6 mm substrate. Per IPC-7351 and Intel MAX II design guidelines, use 0.27 mm solder mask openings, NSMD (non-solder mask defined) pads, and a 4-6 layer stack-up with continuous ground planes beneath the device. Via-in-pad is NOT recommended; use dog-bone fan-out to inner layers. Microstrip impedance should be 50 ohm single-ended for high-speed signals.
The EPM240M100C5N requires a clean 1.8 V core supply (VCCINT) decoupled with 0.1 uF and 10 uF ceramic capacitors placed within 5 mm of each VCCINT pin. Each I/O bank has its own VCCIO supply (VCCIO1, VCCIO2, etc.) which can be set independently to 1.5 V, 1.8 V, 2.5 V, or 3.3 V. Decouple each VCCIO with 0.1 uF plus 4.7 uF bulk; place capacitors as close as possible to the supply balls to minimize inductive ringing on logic-level transitions.
Do NOT use 4-wire JTAG when the device is in user mode unless nCONFIG is held low; this can cause unintended reconfiguration. For multi-device JTAG chains, ensure TMS and TCK are properly buffered because the MAX II JTAG pins have limited drive strength. For in-system programming, always include 10 kohm pull-ups on nCONFIG and nCE to prevent spurious configuration during power-up transients.
The 100-ball MBGA package has lead inductance of approximately 0.5 nH per ball, which combined with package capacitance (~1.5 pF) creates resonances in the 800 MHz to 1.5 GHz range. For signals above 100 MHz, use series damping resistors (22-33 ohm) at the driver to flatten impedance discontinuities. Simulate with the MAX II IBIS model (available from Intel) before finalizing PCB layout.
The 100-ball MBGA package has typical theta-JA of 36 C/W with standard JEDEC test board (still air). Under typical CPLD workloads (10-15 MHz internal frequency, 30% I/O toggling), self-heating is negligible (<1 C rise). For continuous high-I/O-throughput designs (>50 MHz toggle rates on >40 outputs), allocate at least 4 thermal vias under the center thermal ball array to spread heat to inner ground planes. The junction-to-ambient thermal resistance can drop to ~25 C/W with proper via stitching.
Informações de conformidade
RoHS compliant per Altera (now Intel) product page and DigiKey listing. Lead-free MBGA package. Not AEC-Q100 qualified - this is an industrial/consumer-grade CPLD, not automotive. Halogen-free status not explicitly stated in available data.
