2EDL900G3XTMA1 vs 2EDL8034G4CXTMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma 2EDL900G3XTMA1 tarafından Infineon ve 2EDL8034G4CXTMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | 2EDL900G3XTMA1 | 2EDL8034G4CXTMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Dual-channel level-shift gate driver IC | — |
| Topology Supported | Half-bridge, high-side, low-side | — |
| Isolation Type | Junction isolation (JI), 120 V | Junction-isolated (level-shifted) |
| Number of Channels | 2 (high-side + low-side) | — |
| Peak Source Current | 4 A | 3 A |
| Peak Sink Current | 6 A | 4 A |
| Drive Output Voltage Range | 4 V to 16 V | — |
| Supply Voltage (VDD/VBS) | 4 V to 16 V | — |
| Switching Device Supported | Si MOSFET, enhancement-mode GaN FET | — |
| Configurable Deadtime | Yes (programmable) | — |
| Integrated Current Sense Amplifier | Yes | — |
| PWM Modes | Tri-state, HSCC HS, HSCC LS, Hi/Li, Hi/Li inverted | — |
| Input Logic Compatibility | 3.3 V / 5 V / TTL (per datasheet) | 3.3 V / 5 V |
| Paket | TSNP-16 (3x3 mm) with exposed pad | PG-VDSON-10-2 (DSN-10) with exposed pad |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı Aralığı | -40 C to +125 C | — |
| MSL Seviyesi | 1 | [DATA_NEEDED: MSL level] |
| RoHS Durumu | Compliant | — |
| Driver Type | — | Half-Bridge (High-Side / Low-Side) |
| Configuration | — | Non-Inverting |
| Bootstrap Voltage (Max) | — | 120 V |
| Çıkış Sayısı | — | 2 |
| Rise Time (Typical) | — | [DATA_NEEDED: rise time ns] |
| Fall Time (Typical) | — | [DATA_NEEDED: fall time ns] |
| Propagation Delay (Typical) | — | [DATA_NEEDED: propagation delay ns] |
| VCC Supply Voltage | — | [DATA_NEEDED: VCC range V] |
| UVLO Protection | — | Yes (VCC and VBS) |
| ESD Rating (HBM) | — | [DATA_NEEDED: ESD HBM kV] |
| İşletim Jant Sıcaklığı | — | -40 C to +125 C |
| Lead-Free / RoHS | — | Yes (per Infineon product page) |