K9JUGY8J5C-CCK0 - 1Tb TLC V-NAND Flash | Samsung
料号： K9JUGY8J5C-CCK0 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $9.8 | $9.80 |
| 10 | $9.2 | $92.00 |
| 100 | $8.6 | $860.00 |
| 500 | $8.1 | $4,050.00 |
| 1,000 | $7.6 | $7,600.00 |
K9JUGY8J5C-CCK0 概述
NAND flash is a non-volatile memory technology that retains data without power and sits at the heart of the storage hierarchy: page/program-erase operations -> NAND flash die -> NAND package -> SSD/eMMC/UFS module -> system storage subsystem. Unlike DRAM, NAND requires block-based erase and sequential page programming, managed by an external or integrated flash controller.
Key characteristics of this device include its 1Tb capacity per package, triple-level-cell (TLC) density, and Samsung V6 (128-layer) vertical NAND process, which improves bit density and cost-per-GB versus planar and earlier V-NAND generations. The CCK0 speed-grade suffix indicates the device's read latency and interface timing class; controllers must be configured to the correct ONFI/toggle-mode timing for reliable operation.
Technically, the die uses Samsung's charge-trap-flashing vertical channel architecture, which reduces cell-to-cell interference compared to planar floating-gate cells at equivalent scaling. TLC devices require strong ECC (LDPC), die-level interleaving, and wear-leveling firmware to achieve rated endurance over the specified program/erase cycle count.
Typical applications include client and enterprise SSDs, eMMC/UFS embedded storage, USB drives, memory cards, and industrial storage modules where high capacity per footprint is the primary requirement.
Design consideration: verify the exact package footprint, interface mode, and operating temperature range against the official Samsung datasheet before layout, as Samsung NAND part-number suffixes denote package and speed variants that are not always drop-in interchangeable.
This page synthesizes Samsung family cross-references, drop-in alternatives, and selection guidance not consolidated on distributor pages.
直接替换替代料： K9JUGY8J5C-CCK0 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： K9JUGY8J5C-CCK0 （相同外形与封装尺寸） ——差异在于 Memory Type, Cell Type, Technology, Density, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
K9JUGY8J5C-BCK0
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →K9IUGY8J7B-CCK0
✅ 直接替换✓ 有现货
$1 / 个
查看数据手册 →K9IUGY8J7B-BCK0
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →K9HUGY8J5B-CCK0
✅ 直接替换✓ 有现货
$9.6 / 个
查看数据手册 →K9HUGY8J5B-BCK0
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →K9JUGY8J5C-CCK0 最大额定值与电气特性
| Manufacturer | Samsung Electronics |
| 存储器类型 | NAND Flash - V-NAND (TLC) |
| Density | 1 Tb (128 GB) |
| Cell Type | TLC (Triple-Level Cell) |
| Technology Generation | V6 (6th-gen V-NAND, 128-layer) |
| 安装类型 | Surface Mount |
K9JUGY8J5C-CCK0 standard 引脚配置指南
K9JUGY8J5C-CCK0（standard 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： K9JUGY8J5C-CCK0.
请参阅 数据手册 以查看完整引脚配置。
典型应用
K9JUGY8J5C-CCK0 适用于 6 应用s: Client SSD Storage, Enterprise Storage, Embedded eMMC/UFS Storage, USB Flash Drives, Memory Cards, Industrial Storage Modules.
Client SSD Storage
The K9JUGY8J5C-CCK0's 1Tb (128 GB) TLC capacity per package makes it a core building block for client NVMe and SATA SSDs, where 8-16 packages yield 1-2 TB arrays in a compact footprint. Its V6 128-layer V-NAND process lowers power per bit versus previous generations, improving battery life in laptops. The SSD controller schedules interleaved die operations and applies LDPC ECC to meet TLC endurance; the CCK0 speed grade defines read latency used in firmware timing tables.
推荐
Enterprise Storage
In enterprise SSDs and all-flash arrays, the K9JUGY8J5C-CCK0 provides high density per package, reducing PCB area and BOM count for multi-terabyte drives. V-NAND V6's charge-trap architecture improves retention and read-disturb behavior compared with planar TLC, important for data-center duty cycles. Firmware-level wear leveling, data scattering, and end-to-end CRC are mandatory; designers should derate endurance based on workload write amplification documented by the controller vendor.
推荐
Embedded eMMC/UFS Storage
Smartphones, tablets, and IoT gateways embed NAND directly into eMMC or UFS packages. The K9JUGY8J5C-CCK0's 1Tb TLC die is the class of silicon used in such stacked devices, where capacity per z-height matters. Its low operating voltage class suits mobile power budgets, and V6 process maturity ensures supply continuity across product lifecycles. Integrators using bare NAND must supply their own FTL (flash translation layer) with power-loss protection.
推荐
USB Flash Drives
High-capacity USB drives use 1-2 packages of 1Tb TLC NAND such as the K9JUGY8J5C-CCK0 behind a single-chip USB controller. The V6 generation's improved density lets a 128 GB drive use one package, cutting cost and thickness. Because USB controllers typically use simplified FTLs, sustained write speed after the SLC cache fills reflects raw TLC program performance of the CCK0 grade - a key benchmark for product marketing claims.
推荐
Memory Cards
SD and microSD cards at 128 GB and above commonly employ a single 1Tb TLC NAND package like the K9JUGY8J5C-CCK0. The V6 128-layer process supports the card-controller interface timing while fitting within the extremely thin card form factor. Card controllers implement dynamic SLC caching and ECC sized for TLC raw bit error rates; the part's read-latency class influences sustained 4K random-read performance cited in V30/V60/UHS speed-class certification.
推荐
Industrial Storage Modules
Industrial PCs, gateways, and logging systems use the K9JUGY8J5C-CCK0 on CFast, SATA M.2, or raw-NAND boards where wide-temperature qualification matters. Designers must confirm the operating temperature range of the CCK0 grade against the datasheet; Samsung also offers industrial-grade (IG) screened variants for extended range and fixed-BOM longevity. Under-sizing ECC or omitting power-loss protection are the most common field-failure causes in such deployments.
推荐
推荐产品汇总
工程参考数据： K9JUGY8J5C-CCK0 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | K9JUGY8J5C-BCK0 | K9IUGY8J7B-CCK0 | K9HUGY8J5B-CCK0 |
|---|---|---|---|---|
| Package | Fine-pitch BGA (per Samsung V-NAND family) | Fine-pitch BGA - same | Fine-pitch BGA - verify ball map | Fine-pitch BGA - verify ball map |
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | Samsung Electronics |
| Cell Type | TLC | TLC | TLC | TLC |
| NAND Generation | V6 (128-layer V-NAND) | V6 (128-layer V-NAND) | V6 (128-layer V-NAND) | V5-generation V-NAND |
| Grade Suffix | CCK0 | BCK0 | CCK0 | CCK0 |
| Lifecycle Status | Active | Active | Active | Active (prior generation) |
关键差异点
- Newest V6 generation in family （对比 K9HUGY8J5B-CCK0)
- Same-die grade option for qualification reuse （对比 K9JUGY8J5C-BCK0)
- Largest density per package among listed siblings （对比 K9IUGY8J7B-CCK0)
设计说明
Never assume grade-suffix interchangeability without timing verification. Samsung suffixes such as BCK0 vs CCK0 encode speed/temperature classes; a controller timing table tuned for one grade may violate tR or tPROG limits on another. Validate against the official Samsung datasheet and re-run controller readiness tests (read-retry, calibrate) after any NAND swap, even same-die ones.
Fine-pitch BGA NAND at toggle-mode speeds requires length-matched traces on the DQ/RE/WE bus and solid ground reference. Keep stubs under 2 mm, series-terminate the clock/ strobe lines, and reference the impedance target (typically 50 ohm single-ended) on all flash channels. For multi-die interleaving, group each channel's routing cleanly to avoid crosstalk between independent die buses.
NAND VCC and VCCQ rails see high transient currents during program operations (page programming across multiple die simultaneously). Provide bulk capacitance near each package (e.g., 10 uF per rail) plus 0.1 uF ceramic at ball exits, and size the PMIC for worst-case concurrent programming rather than average current. Estimated: with several die programming concurrently, peak rail current can exceed 3x idle current, causing brown-out resets if decoupling is under-designed.
Confirm the exact BGA ball count, pitch, and A1 ball location from the official Samsung package outline drawing before routing; this page's pinout is intentionally null because Samsung restricts the full ball map to datasheet/NDA channels. Use via-in-pad with filled vias or dog-bone fanout per IPC practice for the fine pitch, and define keep-outs under the package for rework access.
合规信息
Compliance declarations not present in provided verified data. Samsung publishes per-part environmental certificates on its semiconductor website; obtain RoHS/REACH documents for this specific grade before release.
