ژێرپۆلەکان

📁 Analog Switches 1 بەرهەمەکان 📁 Audio Codecs 59 بەرهەمەکان 📁 Bus Repeaters, Buffers & Extenders 2 بەرهەمەکان 📁 Communication ICs 1 بەرهەمەکان 📁 Digital Isolators 15 بەرهەمەکان 📁 Drivers, Receivers, Transceivers 5 بەرهەمەکان 📁 Ethernet ICs 1 بەرهەمەکان 📁 Ethernet PHYs 8 بەرهەمەکان 📁 Ethernet Transceivers 7 بەرهەمەکان 📁 I/O Expanders 3 بەرهەمەکان 📁 I2C 1 بەرهەمەکان 📁 Industrial Interfaces 1 بەرهەمەکان 📁 Interface Transceivers 5 بەرهەمەکان 📁 LIN Transceivers 28 بەرهەمەکان 📁 LVDS Drivers 1 بەرهەمەکان 📁 Logic Drivers 1 بەرهەمەکان 📁 Logic ICs 7 بەرهەمەکان 📁 Modems 1 بەرهەمەکان 📁 Network Interface 1 بەرهەمەکان 📁 PCI Express Switches 0 بەرهەمەکان 📁 RS-232/RS-422/RS-485 Interface 4 بەرهەمەکان 📁 RS-485 Transceivers 23 بەرهەمەکان 📁 RS-485/RS-422 22 بەرهەمەکان 📁 Sensor and Detector Interfaces 0 بەرهەمەکان 📁 SerDes 0 بەرهەمەکان 📁 Signal Buffers, Repeaters 2 بەرهەمەکان 📁 Signal Processing 0 بەرهەمەکان 📁 Specialized Interface 1 بەرهەمەکان 📁 Telephony Interfaces 2 بەرهەمەکان 📁 Touch Screen Controllers 1 بەرهەمەکان 📁 USB Connectors 4 بەرهەمەکان 📁 USB Controllers 1 بەرهەمەکان 📁 USB Hubs 1 بەرهەمەکان 📁 USB Interface ICs 37 بەرهەمەکان 📁 Video Codecs 0 بەرهەمەکان 📁 Video ICs 78 بەرهەمەکان

بەرهەمەکان (560+)

LTC4302-1 - Addressable 2-Wire Bus Buffer | Analog Devices
LTC4302-1

LTC4302-1 - Addressable 2-Wire Bus Buffer | Analog Devices

The Linear Technology (Analog Devices) LTC4302-1 is an addressable 2-wire bus buffer with high noise margin, operating from a 2.7V to 5.5V supply in an 8-pin SO-8 (or MSOP-8) surface-mount package. It provides I2C Fast Mode (400 kHz) compatible buffering with 50 ns minimum glitch filtering on the SDAIN and SCLIN signals, and offers 32 selectable addresses via an external resistive divider on the ADDRESS pin. A 2-wire bus buffer is an integrated circuit that isolates and regenerates I2C or SMBus signals between a controller segment and a peripheral segment of the same bus. In the power-management hierarchy of system electronics, bus buffers sit between the host controller and the distributed peripherals, functioning as signal repeaters that allow capacitive load splitting, live-board insertion, and improved noise immunity. The LTC4302-1 belongs to the broader family of I2C buffers, SMBus buffers, and bus repeaters within mixed-signal interface ICs. Key differentiating features include hot-swap capability that permits a peripheral board to be inserted into or removed from a live backplane without corrupting the bus, rail-to-rail input glitch filtering of up to 50 ns duration pulses, and the ADDRESS pin architecture that provides 32 possible addresses set by an external resistive divider between VCC and GND. When VCC is low, the SDA and SCL inputs and outputs do not load the bus lines, a critical behavior for multi-card backplane systems. Technically, the LTC4302-1 uses rise-time accelerator circuitry and high noise margin level shifting on both the SDA and SCL channels. Per the Analog Devices datasheet (4302fs), the glitch filters prevent signals of up to 50 ns minimum duration and rail-to-rail voltage magnitude from passing into the 2-wire bus digital interface circuitry, ensuring robustness against backplane transients at Fast Mode 400 kHz operation. Typical applications include live-backplane peripheral card insertion in telecom and datacenter equipment, SMBus-aware server power-supply management, and I2C bus extension where bus capacitance exceeds the 400 pF standard limit. The LTC4302-1 variant's specific offset/slope behavior suits designs where an exact DC offset on the buffered segment is required. Design consideration: the ADDRESS pin resistive divider must use 1% or better tolerance resistors, and supply voltage must remain within 2.7V to 5.5V to guarantee glitch-filter timing and drive specifications. This page synthesizes distributor data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
LTC4307IMS8#TRPBF - Hot Swappable 2-Wire Bus Buffer | Analog Devices
LTC4307IMS8#TRPBF

LTC4307IMS8#TRPBF - Hot Swappable 2-Wire Bus Buffer | Analog Devices

The Analog Devices LTC4307IMS8#TRPBF is a low offset hot swappable 2-wire bus buffer with stuck bus recovery, supporting 400kHz I2C/SMBus operation in an 8-lead MSOP package (3.00mm width). It allows I/O card insertion into a live backplane without corrupting the data and clock busses. A 2-wire bus buffer, sometimes called an I2C buffer or bus repeater, is an interface IC that isolates the capacitance and voltage levels of two segments of an I2C or SMBus. In the system hierarchy it sits between the physical bus wires and the master or slave devices, forming part of the broader interface and signal-buffer family. Its role is to let one segment carry heavy loads (many devices, long cables, large capacitance) while the other segment presents only the buffer's very low input capacitance. Key features of the LTC4307 include bidirectional buffering that keeps backplane and card capacitances isolated, sub-10pF data and clock input capacitance on the card side, a low offset voltage architecture that accurately passes logic levels, and stuck bus recovery logic that frees a bus segment when a slave device holds SDA low. The hot swap capability means connections can be made and broken with the backplane powered, a critical property for ATCA, blades, and server storage platforms. Technically, the LTC4307 uses Analog Devices' rising-edge accelerators and digital rise-time recognition to distinguish valid start and stop conditions from slow edges caused by heavy bus capacitance. This allows 400kHz operation even when the buffered segment is heavily loaded, while level-shifting and offset compensation preserve timing margins across both bus segments. Typical applications include live-backplane I/O card insertion, HDMI DDC bus isolation, server and storage management SMBus isolation, and telecom line-card 2-wire bus segmentation. In each case the buffer prevents bus lockups during insertion events and extends the usable bus capacitance beyond the 400pF limit of a raw I2C segment. Design consideration: connect the ENABLE pin correctly for power sequencing and provide a small bypass capacitor on each VCC pin; during hot insertion the buffer must be the first element to see the backplane bus so card capacitance never appears on the backplane segment. This page synthesizes distributor pricing, drop-in alternatives (including the Renesas ISL33001IUZ cross-brand equivalent), and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
MAX13487EESA+T - 5V RS-485/RS-422 Transceiver | Maxim Integrated
MAX13487EESA+T

MAX13487EESA+T - 5V RS-485/RS-422 Transceiver | Maxim Integrated

The Analog Devices (Maxim Integrated) MAX13487EESA+T is a +5V half-duplex RS-485/RS-422-compatible transceiver with ±15kV ESD protection, proprietary AutoDirection control, and 500 kbps data rate, housed in an 8-pin NSOIC (SOIC-8, 3.90mm width) package with one driver and one receiver. An RS-485/RS-422 transceiver is a differential interface IC that converts single-ended logic signals into differential bus signals, sitting within the interface IC hierarchy of serial communications semiconductors. Half-duplex RS-485 transceivers share one differential pair for both transmit and receive, so direction control is a key architectural decision. Traditional parts require a microcontroller GPIO to drive the DE/RE pins; the MAX13487E instead uses Maxim's AutoDirection architecture, which senses the driver input and enables the driver automatically. Key features include true fail-safe receiver circuitry guaranteeing a logic-high receiver output when inputs are shorted, open, or idle, hot-swap capability that eliminates false transitions on the bus during power-up or live insertion, and ±15kV ESD protection on the transceiver pins. The /SHDN pin reduces supply current for low-power systems, and /DI, /RE and /SHDN pins are rated from -0.3V to +6V, allowing direct interfacing with 3.3V microcontrollers without level shifting. Architecturally, the device integrates one driver and one receiver operating from a +5V supply, with receiver input being 1/8 unit load, permitting up to 256 transceivers on a shared bus (per Cosine reference to equivalent-class devices). AutoDirection removes firmware overhead and timing errors associated with GPIO direction switching in polled half-duplex protocols. Typical applications include industrial fieldbus and Profiling nodes, building automation and HVAC controllers, motor/drive networks, battery-management stacks, and embedded metering where robust differential communication over long cables is required. Design consideration: the hot-swap feature matters when nodes are inserted into a live backplane; for software-controlled designs a conventional DE/RE part may be preferred instead. Verify bus biasing resistors for idle-state fail-safe operation. This page synthesizes distributor availability data, cross-reference findings, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
MAX14800CCM+T - 16-Channel High-Voltage Analog Switch | Analog Devices
MAX14800CCM+T

MAX14800CCM+T - 16-Channel High-Voltage Analog Switch | Analog Devices

Analog Devices MAX14800CCM+T is a 16-channel, 1:1 analog switch IC designed for high-voltage switching in ultrasonic imaging and printer systems, with 48 ohm on-resistance and low charge injection. The device is supplied in a 48-LQFP 7 x 7 mm surface-mount package. The MAX14800CCM+T suffix identifies the commercial-temperature ordering configuration supplied in tape-and-reel format. A high-voltage analog switch routes signals between measurement, imaging, and drive circuitry while limiting unwanted charge transfer into sensitive nodes. In the broader semiconductor hierarchy, the MAX14800CCM+T belongs to the analog switch family within interface ICs. These devices are used where a multiplexer or discrete switching network would add excessive component count, leakage paths, or inconsistent channel behavior. The main functional characteristics are 16 independently controlled switch circuits, 1:1 signal routing, and an on-resistance of 48 ohm. Its low-charge-injection characteristic is especially valuable when switching relatively high-impedance sources, because charge injected into the input/output node can create timing errors or transient measurement offsets. The 48-LQFP package provides a compact surface-mount footprint for multi-channel imaging and printer control boards. The MAX14800 family was developed for ultrasonic imaging and printer applications, where multiple high-voltage-capable channels are required in a single device. Integrating 16 switch circuits into one package reduces the number of discrete high-voltage switch packages, external routing connections, and associated board-level interconnect requirements. The family also includes related MAX14801, MAX14802, MAX14803, and MAX14803A variants with different protection or discharge features. Because the MAX14800 is intended to handle high-voltage switching, the complete electrical limits must be checked in the manufacturer datasheet before applying it to a new board. In particular, verify the absolute maximum supply voltage, individual channel voltage rating, allowable input and output voltage, and derating requirements for the selected package. Do not infer those limits from the nominal operating description. For layout, place the device close to the signals it switches, keep high-voltage and sensitive-signal paths separated, and provide a stable ground reference around the package. Check whether unused channels require defined logic states. After confirming the pin assignment, enable levels, and switching characteristics against the datasheet, the MAX14800CCM+T can support compact multichannel routing in ultrasonic, printer, and related high-voltage interface systems. This product page combines the confirmed channel count, resistance, package, ordering information, and application context with engineering guidance for PCB implementation, protection, and alternative selection. It is intended to help designers establish whether the device architecture fits before completing detailed schematic and production-release checks.

RFQ پەیوەندی
MAX14819AATM+T - Dual IO-Link Master Transceiver | Analog Devices
MAX14819AATM+T

MAX14819AATM+T - Dual IO-Link Master Transceiver | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX14819AATM+T is a low-power, dual-channel IO-Link master transceiver with integrated sensor/actuator power-supply controllers, housed in a 48-pin LFCSP (TQFN) 7x7 mm package. The device integrates two IO-Link physical layers, two L+ supply controllers, two auxiliary digital input channels, and framers/L+ drivers compliant with IO-Link v1.1.3, IEC 61131-2, and IEC 61131-9 SDCI standards. An IO-Link master transceiver is a type of industrial communication controller that bridges a higher-level fieldbus (e.g., PROFINET, EtherNet/IP) or PLC backplane to point-to-point IO-Link sensors and actuators. Within the broader hierarchy, an IO-Link master belongs to the family of industrial sensor/actuator interface ICs, which sit between programmable logic controllers (PLCs) and field devices. The MAX14819A's dual-channel architecture plus on-chip L+ supply switching eliminates the need for external high-side switches and isolated DC/DC converters per port. Key specifications include operation from a single 9V to 36V (L+ 24V nominal) supply, integrated L+ supply controllers with current-limit and reverse-current protection, 3.3V or 5V logic interface, SPI/parallel host interface options, low quiescent current, integrated framer/UART, and AEC-Q100-grade temperature performance to +125C. Auxiliary DI_ channels support standard binary input standards per IEC 61131-2 type 1/3. The MAX14819A's architecture combines two independent C/Q transceivers with high-side L+ drivers, watchdog-protected framer FIFOs, and configurable interrupt logic. Compared to discrete IO-Link master implementations built from opto-couplers, discrete L+ MOSFETs, and external framers, the MAX14819A reduces BOM count by approximately 70% and PCB area by roughly 50% per dual port, simplifying functional safety documentation and EMC compliance for IEC 61131-9. Typical applications include IO-Link master gateways, multi-port industrial sensor hubs, PLC remote I/O slices, IO-Link 4-channel/8-channel expansion modules, factory automation digital input concentrators, and Industry 4.0 retrofit I/O modules. Each channel can simultaneously drive one IO-Link device and read one binary standard input, making the IC suitable for high-density I/O. When designing with this device, route the L+ high-current paths with wide copper pours and decouple each L+ output with a local 10uF/100nF pair. Verify thermal performance with 2oz copper on inner/outer layers; the LFCSP-48 thermal pad must be soldered to a continuous ground plane for proper heat spreading. The integrated watchdog requires the host MCU to refresh the SPI status register at least once per configured interval, otherwise the device enters a safe-state L+ shutdown. This page synthesizes distributor stock data, drop-in same-brand alternatives, and design notes not available in the manufacturer datasheet alone.

RFQ پەیوەندی
MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices
MAX14882AWE+

MAX14882AWE+ - 5kVRMS Isolated CAN Transceiver, 16-SOIC | Analog Devices

The Analog Devices MAX14882AWE+ is an isolated high-speed CAN transceiver providing 5kVRMS (60s) galvanic isolation between the CAN-protocol controller-side (TDX, RXD) and the physical CAN bus wires (CANH, CANL), housed in a 16-pin Wide SOIC (W SOIC) package with 8mm of creepage and clearance. Key parameters include: ±25V receiver input common-mode range exceeding the ISO 11898 requirement of -2V to +7V, ±54V fault tolerance on CANH/CANL bus pins, and ±15kV ESD protection (Human Body Model) on bus-side GNDB. An isolated CAN transceiver is a physical-layer interface device that integrates galvanic isolation directly between the digital logic side and the bus side of a CAN (Controller Area Network) controller, replacing discrete optocouplers or digital isolators plus a separate CAN transceiver. The category hierarchy is: CAN transceiver -> CAN interface IC -> interface IC -> power management/isolation IC -> semiconductor. The MAX14882 reduces BOM count, simplifies PCB layout, and ensures deterministic propagation delay across the isolation barrier compared with discrete isolation + transceiver solutions. Key differentiating features include a wide 3.0V to 5.5V supply on the controller-side (VDDA) and 4.5V to 5.5V on the bus-side (VDDB), an integrated transformer driver and LDO that can power the bus-side supply from a single external transformer, and an auxiliary LDO capable of 130mA internal plus external load current up to 300mA total. Additional protection features include hot-plug detection, common-mode stabilization via POL pin, and the ability to recover from cross-wired bus cables through polarity inversion via the POL pin. The MAX14882 uses Analog Devices' proprietary capacitive isolation technology to achieve up to 5000VRMS isolation for 60 seconds while supporting data rates up to 1Mbps per ISO 11898. The integrated transformer driver eliminates the need for a dedicated isolated DC-DC converter, saving both PCB area and cost in space-constrained industrial designs. Typical applications include industrial CAN bus networks, factory automation systems, building automation (BACnet), photovoltaic inverter communications, electric vehicle charging stations, and any application where high-voltage ground potential differences exist between CAN nodes. When designing with this device, ensure the external transformer meets the 5kVRMS isolation rating and that creepage/clearance distances comply with end-application safety standards (IEC 61800, IEC 60664). Decoupling capacitors must be placed close to both VDDA and VDDB pins to minimize switching noise on the bus-side supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet. All comparison data was sourced from real-time distributor listings on 2026-10-09.

RFQ پەیوەندی
MAX202EEUE+T - 120kbps 5V RS-232 | Analog Devices
MAX202EEUE+T

MAX202EEUE+T - 120kbps 5V RS-232 | Analog Devices

Analog Devices MAX202EEUE+T is a 5V RS-232 transceiver with two driver and two receiver channels, data rates up to 120kbps, and ±15kV ESD protection in a 16-pin TSSOP package. The MAX202E family supports single-supply operation through integrated charge-pump circuitry and complies with EIA/TIA-232E and CCITT V.28 requirements. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a RS-232 serial port. Its drivers translate low-voltage logic levels into RS-232 bipolar levels, while its receivers perform the reverse conversion. The MAX202EEUE+T belongs to the RS-232 transceiver hierarchy, which also includes line drivers, line receivers, interface controllers, and broader communication interface semiconductors. The two-driver, two-receiver arrangement supports full-duplex serial communication through two data channels. Its 120kbps maximum data rate provides sufficient margin for common serial links while meeting the EIA/TIA-232E and CCITT V.28 specifications identified by Analog Devices. Integrated charge-pump circuitry generates the bipolar voltage required by RS-232 drivers from a single +5V supply, reducing the external power-supply complexity associated with older interface designs. ESD protection is a central feature of this device. The manufacturer describes the MAX202E family as having ±15kV Human Body Model ESD protection, making the interface suitable for systems where cables and connectors can be exposed to electrostatic discharge. The MAX202EEUE+T combines that protection with integrated charge-pump operation in a compact 16-pin TSSOP package suited to dense industrial, instrumentation, and embedded-control equipment. Typical uses include serial service ports, test and measurement equipment, industrial controllers, data-acquisition systems, and embedded systems that exchange data with RS-232 peripherals. Two channels can connect separate transmit and receive paths, while full-duplex operation allows the endpoint to send and receive simultaneously. The 120kbps rate is especially appropriate for configuration interfaces, diagnostic links, and legacy equipment connectivity rather than high-volume local-area networking. When laying out a design, place the charge-pump capacitors and interface bypass capacitors close to their designated pins, and route the RS-232 traces away from sensitive analog or high-speed digital signals. Treat the external connector as an ESD entry point, use a suitable chassis and signal-ground strategy, and verify the complete interface against the system grounding requirements. The manufacturer datasheet is the authoritative source for pin assignment, capacitor values, and test conditions. This product page combines the confirmed MAX202E specifications with package, sourcing, replacement, and design guidance. It also distinguishes true pin-compatible drop-in options from family members that use different packages, helping engineers avoid incorrect substitutions when reusing an existing PCB layout.

RFQ پەیوەندی
MAX202EUE+ - 5V RS-232 Transceiver 2/2 TSSOP-16 | Analog Devices
MAX202EUE+

MAX202EUE+ - 5V RS-232 Transceiver 2/2 TSSOP-16 | Analog Devices

The Analog Devices MAX202EUE+ is a +5V-powered RS-232 transceiver with 2 drivers and 2 receivers, housed in a 16-pin TSSOP package, requiring only four 0.1uF external capacitors and supporting data rates up to 120kbps. An RS-232 transceiver is a line driver and receiver IC that converts logic-level serial signals (TTL/CMOS, 0V to 5V) to the higher voltage EIA/TIA-232E levels (+/-5V or greater) required by serial communication ports, and converts incoming RS-232 levels back to logic levels. It sits within the interface IC family of the broader semiconductor taxonomy, bridging a microcontroller UART and a physical DB-9 serial port without needing +/-12V supplies. Key features include single +5V operation, which eliminates the dual supply rails older RS-232 interfaces required; dual charge-pump voltage converters that generate the RS-232 signaling levels from the 5V rail using only small 0.1uF flying and storage capacitors; and the E-suffix enhanced ESD protection family design intended for harsh industrial environments. The MAX202E family also uses a proprietary low-dropout transmitter output stage that maintains required +/-5V minimum EIA/TIA-232E output levels even at full load. According to Analog Devices, the drivers and receivers meet all EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120kbps when loaded, and the drivers sustain +/-5V output swings at data rates in excess of 120kbps under the specified EIA/TIA-232E loading. The MAX202E/MAX232E devices are offered in 16-pin TSSOP, narrow SO, wide SO, and DIP packages, giving designers footprint flexibility across a common pinout. Typical applications include legacy industrial serial links (PLC and instrumentation ports), point-of-sale terminals and printers, set-top box and modem debug UARTs, and any embedded system that must interoperate with a standard RS-232 COM port. The dual-driver, dual-receiver configuration covers the TX/RX plus RTS/CTS handshake lines of a full serial port. Design consideration: place the four 0.1uF charge-pump capacitors and the V+ / V- storage capacitors close to the IC pins; ceramic X7R capacitors are recommended, and excessive ESR on C1/C2 degrades charge-pump efficiency and output swing. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternative cross-references, ESD-grade family comparisons, practical layout guidance, and sourcing information in one place.

RFQ پەیوەندی
MAX202IDE4 - 5V Dual RS-232 Transceiver | Texas Instruments
MAX202IDE4

MAX202IDE4 - 5V Dual RS-232 Transceiver | Texas Instruments

Texas Instruments MAX202IDE4 is a 5 V dual RS-232 line driver and receiver with ±15 kV ESD protection, operating to 120 kbit/s in a 16-pin SOIC package. It combines two driver channels and two receiver channels on one IC, while external 0.1 µF charge-pump capacitors provide the bipolar voltage levels required by RS-232 systems. An RS-232 transceiver is an interface circuit that connects a logic-level UART, microcontroller, or data-processing system to a physical RS-232 port. Its transmitters convert low-voltage logic signals into RS-232-compatible levels, and its receivers convert bipolar serial data back into logic-level signals. Within the interface-IC hierarchy, the MAX202IDE4 is a dual RS-232 transceiver suitable for equipment requiring two communication channels without allocating separate driver and receiver ICs. The principal operating characteristics include a 5 V supply, operation up to 120 kbit/s, ±15 kV ESD protection on the RS-232 bus pins, and external 0.1 µF charge-pump capacitors. According to the Texas Instruments datasheet, the bus-pin protection meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. These features make the device appropriate for legacy serial ports, industrial control links, point-of-sale equipment, and service interfaces that still use RS-232. The MAX202IDE4 uses a charge-pump architecture to generate the positive and negative voltage swings required for RS-232 transmission. Because the required voltage conversion is performed on-chip, the design uses fewer external signal components than a discrete transmitter and receiver implementation. The two transmitters and two receivers are independently organized, allowing one device to support two RS-232 channels while sharing a common supply and ground reference. Typical applications include two-channel industrial equipment links, configuration and service ports on embedded systems, communications between a UART-equipped controller and an RS-232 peripheral, and legacy data-logger or test-system connections. The interface is most useful where the host logic operates from 5 V and the cable length, grounding, and protection strategy comply with RS-232 system-design practices. Designers should place the charge-pump capacitors and interface-side bypass capacitor close to their associated pins, route the exposed board area according to the package guidance, and provide a solid ground path between the transceiver and connector. ESD protection does not eliminate the need for disciplined cable shielding, common-mode grounding, and connector selection. The MAX202IDE4 should not be treated as a replacement for RS-485, RS-422, or isolated communication interfaces. This page consolidates the verified device identity, electrical characteristics, package information, drop-in candidates, comparison parameters, and practical interface-design guidance. It also distinguishes verified catalog parameters from specification fields that require confirmation from the manufacturer datasheet before a new PCB release or production qualification.

RFQ پەیوەندی
MAX202IDW - 120kbps Dual RS-232 Transceiver | Texas Instruments
MAX202IDW

MAX202IDW - 120kbps Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX202IDW is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, a 120 kbit/s data rate, and ±15 kV ESD protection in a 16-pin SOIC package. It provides ±9 V RS-232 driver outputs and implements the electrical interface between an asynchronous communication controller and a serial connector. An RS-232 transceiver is an interface IC that converts logic-level TTL signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX202IDW belongs to the line-driver/receiver and transceiver hierarchy, with its integrated charge-pump circuit producing the bipolar voltage levels required by TIA/EIA-232-F and ITU V.28 interfaces. Key features include two line drivers, two line receivers, a dual charge pump, 120 kbit/s operation, and pin-to-pin ±15 kV ESD protection on the serial-port connection pins, including ground. The device operates from a single 5 V supply and uses four external 0.1 µF capacitors for charge-pump operation. These characteristics make it suitable for legacy serial ports, industrial equipment, instrumentation, and service interfaces where bidirectional RS-232 communication is required. The integrated charge pump generates positive and negative RS-232 levels from the 5 V supply, avoiding a separate negative supply rail. The receivers detect RS-232 levels and present them to the host logic, while the drivers accept host-compatible inputs. The specified ±9 V output swing and 120 kbit/s maximum signaling rate support established asynchronous serial protocols, although cable length, capacitance, grounding, and system timing must also be considered. Typical uses include DB-9 serial-console links, industrial control and test equipment, legacy peripheral adapters, configuration interfaces, and point-to-point RS-232 links between embedded controllers and external devices. For designs requiring more than two channels, multiple MAX202 devices or a larger multi-channel transceiver may be more appropriate. The principal design consideration is correct charge-pump capacitor placement. Keep the four 0.1 µF capacitors close to their associated pins, provide an uninterrupted ground path, route connector-side signals away from sensitive logic, and use protection components with suitable voltage and capacitance ratings when cables leave the enclosure. This page combines verified manufacturer and distributor information, a package-specific comparison table, practical interface-layout guidance, and clearly identified drop-in alternatives to support faster component selection and PCB design.

RFQ پەیوەندی
MAX202IDWR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDWR

MAX202IDWR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX202IDWR is a 5 V dual RS-232 line driver and receiver with two transmit channels, two receive channels, a 120 kbit/s data rate, and ±15 kV ESD protection in a 16-pin SOIC package. It provides ±9 V RS-232 driver outputs and implements the electrical interface between an asynchronous communication controller and a serial connector. An RS-232 transceiver is an interface IC that converts logic-level TTL signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX202IDWR belongs to the line-driver/receiver and transceiver hierarchy, with its integrated charge-pump circuit producing the bipolar voltage levels required by TIA/EIA-232-F and ITU V.28 interfaces. Key features include two line drivers, two line receivers, a dual charge pump, 120 kbit/s operation, and pin-to-pin ±15 kV ESD protection on the serial-port connection pins, including ground. The device operates from a single 5 V supply and uses four external 0.1 µF capacitors for charge-pump operation. These characteristics make it suitable for legacy serial ports, industrial equipment, instrumentation, and service interfaces where bidirectional RS-232 communication is required. The integrated charge pump generates positive and negative RS-232 levels from the 5 V supply, avoiding a separate negative supply rail. The receivers detect RS-232 levels and present them to the host logic, while the drivers accept host-compatible inputs. The specified ±9 V output swing and 120 kbit/s maximum signaling rate support established asynchronous serial protocols, although cable length, capacitance, grounding, and system timing must also be considered. Typical uses include DB-9 serial-console links, industrial control and test equipment, legacy peripheral adapters, configuration interfaces, and point-to-point RS-232 links between embedded controllers and external devices. For designs requiring more than two channels, multiple MAX202 devices or a larger multi-channel transceiver may be more appropriate. The principal design consideration is correct charge-pump capacitor placement. Keep the four 0.1 µF capacitors close to their associated pins, provide an uninterrupted ground path, route connector-side signals away from sensitive logic, and use protection components with suitable voltage and capacitance ratings when cables leave the enclosure. This page combines verified manufacturer and distributor information, a package-specific comparison table, practical interface-layout guidance, and clearly identified drop-in alternatives to support faster component selection and PCB design.

RFQ پەیوەندی
MAX211CWI+T - 4/5 RS-232 Transceiver, 120kbps | Analog Devices
MAX211CWI+T

MAX211CWI+T - 4/5 RS-232 Transceiver, 120kbps | Analog Devices

Analog Devices MAX211CWI+T is a 4/5-channel RS-232 transceiver for V.28 communication interfaces, supporting data rates in excess of 120kbps from a single +5V supply in a 28-pin wide SOIC package. Its integrated charge-pump circuitry generates the bipolar voltage levels required by the drivers without a separate ±12V supply. The receiver also supports low-power operation through shutdown control, while four external 0.1µF capacitors support the on-chip charge-pump design. An RS-232 transceiver is an interface IC that combines drivers and receivers for point-to-point serial communication. In this device family, the transmitter converts TTL or CMOS logic signals into EIA/TIA-232E levels, and the receiver converts bipolar serial data back into logic levels. The MAX211 family belongs to the broader RS-232 interface category within interface ICs and semiconductor communication devices. The principal features are four drivers, five receivers, operation from a single +5V supply, data rates above 120kbps, and driver output levels of ±5V under the specified EIA/TIA-232E load. The integrated charge-pump circuitry eliminates the need for a separate negative supply rail, while shutdown support permits the device to be placed into a low-power state when communication is not required. The MAX211 architecture separates the interface into charge-pump voltage conversion, driver, receiver, and control sections. Four 0.1µF external capacitors are specified for operation with the charge-pump circuitry. This arrangement supports compact single-supply RS-232 designs while preserving familiar bipolar signaling at the connector and cable interface. Typical uses include industrial serial links, data-acquisition equipment, point-of-sale systems, test equipment, and embedded control systems that exchange RS-232 signals over cable. The interface is especially appropriate when legacy equipment expects ±5V RS-232 levels but the internal system supplies only +5V logic power. When laying out the circuit, place the four 0.1µF charge-pump capacitors close to their specified pins and keep the device ground connection compact. Confirm that the selected connector and cable interface use EIA/TIA-232E signal levels rather than RS-422 or RS-485, since the logic levels and voltage polarity are not interchangeable. This product summary combines the manufacturer's electrical and package details with application guidance, pinout considerations, comparison criteria, and design notes intended to help engineers shorten evaluation and prototype time. For purchasing decisions, request a quote on this page for current commercial terms and manufacturing support.

RFQ پەیوەندی
MAX211ECAI+ 4/5 RS-232 Transceiver, 5V, 120kbps | Analog Devices
MAX211ECAI+

MAX211ECAI+ 4/5 RS-232 Transceiver, 5V, 120kbps | Analog Devices

The Analog Devices MAX211ECAI+ is a 4-driver, 5-receiver RS-232 transceiver operating from a single +5V supply in a 28-pin SSOP package. It supports data rates to 120kbps, maintains ±5V EIA/TIA-232E output levels under the specified load, and includes integrated ±15kV human-body-model ESD protection on its interface pins. An RS-232 transceiver is an interface IC that converts logic-level signals from a host, controller, or peripheral into RS-232 line-level signals, while converting returning RS-232 signals back into logic-compatible levels. Within the electronics hierarchy, the MAX211ECAI+ belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor product group. Its integrated charge pump allows single-supply operation without a separate bipolar ±12V rail. The device provides four line drivers and five line receivers in one package. This combination suits communications equipment that needs multiple RS-232 channels while limiting the number of external interface components. The 28-pin SSOP occupies 40% of the board area of the 28-pin wide SO option mentioned for the MAX211 and MAX213 families, making it useful where connector routing and PCB area are constrained. Its integrated charge-pump circuitry generates the bipolar voltage needed by RS-232 drivers from a +5V supply. The receivers and drivers meet EIA/TIA-232E and V.28 requirements at data rates to 120kbps when loaded according to the manufacturer product page. Integrated high ±15kV HBM ESD protection improves robustness against electrostatic discharge encountered during connection and handling of external cabling. Typical uses include industrial control consoles, serial adapters, data-acquisition equipment, POS terminals, and instrumentation requiring multiple RS-232 ports. The four-driver, five-receiver arrangement can support several unidirectional channels and one additional receive-only channel, subject to the exact logic and channel-assignment requirements of the host interface. When laying out the PCB, place the charge-pump capacitors close to their designated pins and route RS-232 traces away from sensitive analog signals. Confirm the MAX211ECAI+ pinout and input/output logic in the manufacturer datasheet before assigning connector signals. Treat the ±15kV HBM rating as a human-body-model ESD rating, not as a broader system immunity guarantee. This page organizes the manufacturer specifications, direct-sourcing information, functional alternatives, and PCB-level design considerations into one engineering reference. It also distinguishes true SSOP pin-compatible alternatives from wider-package or different-package devices that would require a board-layout change.

RFQ پەیوەندی
MAX211ECWI+ 4/5 RS-232 Transceiver, 5V, 28-SOIC | Maxim
MAX211ECWI+

MAX211ECWI+ 4/5 RS-232 Transceiver, 5V, 28-SOIC | Maxim

The Maxim MAX211ECWI+ is a four-driver, five-receiver RS-232 transceiver operating from a single 5V supply in a 28-pin SOIC package. It supports the RS-232 and V.28 communication standards, provides 15kV ESD protection, and uses four external 0.1uF charge-pump capacitors. The MAX211ECWI+ is specified for a 0C to 70C operating-temperature range. An RS-232 transceiver is a semiconductor interface that bridges the voltage-domain difference between CMOS logic and a ±15V RS-232 link. Within the interface IC hierarchy, the MAX211ECWI+ combines charge-pump voltage conversion, differential line drivers, and differential receivers in one package. This integration allows equipment with 5V digital logic to communicate with RS-232 peripherals without implementing discrete level-shifting circuits. The device provides four transmit drivers and five receive channels, making it suitable for multi-port serial equipment, industrial controllers, POS terminals, and service interfaces. Its integrated charge pump generates the bipolar voltage needed by RS-232 drivers while operating from one 5V rail. The four required 0.1uF external capacitors must be placed close to their designated pins for stable charge-pump operation. The MAX211ECWI+ combines four drivers, five receivers, and a charge pump in a single 28-pin SOIC. Maximum data signaling rate, output levels, receiver thresholds, and supply-current limits should be taken from the manufacturer electrical-characteristics table. The 15kV ESD rating applies to the specified protected interface pins and does not by itself establish compliance with every industrial or automotive ESD standard. Typical uses include point-of-sale equipment, test and measurement instruments, data acquisition systems, and industrial serial controllers. In these applications, the five receiver channels can monitor multiple RS-232 signals while four driver channels support outbound control or communication links. Systems requiring more than four active RS-232 ports should count both transmitter direction requirements and receiver loading before assigning channels. The four 0.1uF charge-pump capacitors are essential external components and must follow the datasheet placement and capacitance requirements. Their connection traces should be short and isolated from sensitive analog or high-speed signal paths. The 28-SOIC footprint is relatively large compared with modern compact interface ICs, but it supports a conventional through-hole-compatible surface-mount assembly process. This product page combines device specifications, same-family drop-in alternatives, interface-function comparisons, and practical PCB implementation guidance. The comparison information highlights package, channel count, supply voltage, temperature range, and ESD protection so engineers can select the correct MAX211E-family option without relying on suffix similarity alone.

RFQ پەیوەندی
MAX211IDBG4 - 5V Multichannel RS-232 Transceiver | Texas Instruments
MAX211IDBG4

MAX211IDBG4 - 5V Multichannel RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX211IDBG4 is a 5 V multichannel RS-232 line driver/receiver with four drivers, five receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection, housed in a 28-pin SSOP package. The device also includes a dual charge-pump circuit, allowing the RS-232 transmit outputs to generate the required negative and positive voltage levels from a single supply. An RS-232 transceiver is an interface integrated circuit that combines logic-level driver and receiver functions with the voltage conversion required by the RS-232 standard. Within the signal-chain hierarchy, the MAX211IDBG4 belongs to the RS-232 interface IC class, connecting low-voltage digital systems to external serial ports. It is designed for equipment requiring multiple serial channels while conserving board space through a narrow surface-mount package. The MAX211IDBG4 operates from a 5 V supply and contains four RS-232 drivers and five receivers. Its maximum signaling rate is 120 kbit/s, making it appropriate for legacy serial-console, industrial-control, point-of-sale, and embedded-system connections. The listed ±15 kV HBM ESD protection applies to the serial-port connection pins, including ground, while shutdown operation reduces supply current to a typical 1 µA. Its dual charge-pump circuit generates the bipolar voltage levels used by RS-232 drivers from the 5 V supply. The device is specified to meet or exceed TIA/EIA-232-F and ITU V.28 requirements. This combination of integrated level translation, four transmit channels, five receive channels, and low-power shutdown makes the part useful where multiple serial interfaces must coexist on one board. Typical applications include multiport serial adapters, industrial controller interfaces, test equipment, POS terminals, and embedded debug systems. The five receivers also permit one incoming line to be monitored while four other channels are active. Designers should account for the charge-pump capacitors and ensure that signal routing, grounding, and connector protection preserve the specified ESD and communication performance. For a robust layout, place the charge-pump capacitors and interface bypass capacitor close to their associated pins, route transceiver outputs directly toward the connector, and maintain a low-impedance ground return. The 28-pin SSOP footprint reduces board area, but careful fan-out and signal-return management remain important because RS-232 uses single-ended signaling over relatively slow, long cable links. This page combines the device's principal electrical characteristics, verified source links, interface-design guidance, and selection criteria for engineers evaluating the MAX211IDBG4 in multichannel RS-232 systems.

RFQ پەیوەندی
MAX232ACWE+T - 116kbps Dual RS-232 Transceiver | Analog Devices
MAX232ACWE+T

MAX232ACWE+T - 116kbps Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX232ACWE+T is a dual RS-232 line transceiver with two drivers and two receivers, a maximum data rate of 116 kbps, and operation from a 5.5 V supply. The device is housed in a 16-pin wide SOIC-16W surface-mount package and is supplied in tape-and-reel packaging. It is intended for EIA/TIA-232E and V.28/V.24 serial interfaces where ±12 V is unavailable. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into digital logic levels. Within the signal-chain hierarchy, the MAX232 belongs to the RS-232 interface transceiver class, combining transmitter, receiver, and voltage-generation functions in one package. This integration allows a compact equipment port to communicate with legacy serial equipment without requiring a separate external charge-pump supply. The MAX232ACWE+T provides two transmit channels and two receive channels in one device. Its listed 116 kbps data rate is suitable for conventional asynchronous serial communication rather than high-speed differential buses such as RS-485. The 5.5 V supply requirement permits operation in systems where only a positive 5 V rail is readily available. Its dual-channel organization also reduces component count when two RS-232 ports must share the same logic interface. The MAX232 family is designed for EIA/TIA-232E and V.28/V.24 communication interfaces, including equipment where ±12 V cannot be supplied. The integrated line-driver and receiver functions provide the electrical interface between CMOS/TTL-compatible logic and RS-232 lines. Device variants exist in multiple package and temperature options, so engineers should confirm the exact ordering suffix when matching a board footprint and environmental requirement. Typical uses include industrial control consoles, laboratory instrumentation, point-of-sale equipment, service interfaces, embedded serial ports, and data-acquisition systems. A two-driver, two-receiver arrangement is especially useful when one equipment enclosure must support two independent RS-232 links or combine full-duplex operation on two ports. PCB design should preserve the pin arrangement defined by the SOIC-16W footprint and follow the capacitor and charge-pump guidance in the manufacturer data sheet. Keep the interface connector, protection network, and transceiver on a controlled impedance-free point-to-point RS-232 path, and provide suitable grounding rather than relying on the logic ground as a substitute for a proper cable shield connection. This page combines the exact MAX232ACWE+T ordering information, verified manufacturer specifications, sourcing guidance, interface-use guidance, and a careful review of drop-in alternatives. It is intended to help engineers identify the correct package variant, evaluate replacement options, and implement a robust RS-232 interface without overlooking footprint or qualification differences.

RFQ پەیوەندی
MAX232AMJE/883B - Military RS-232 Transceiver | Analog Devices
MAX232AMJE/883B

MAX232AMJE/883B - Military RS-232 Transceiver | Analog Devices

Analog Devices MAX232AMJE/883B is a +5 V-powered, dual-driver and dual-receiver RS-232 transceiver designed for EIA/TIA-232E and V.28/V.24 communications interfaces. It provides two transmit channels and two receive channels in a 16-lead CDIP package rated for military temperature operation from -55°C to +125°C. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level outputs. Within the interface hierarchy, the MAX232 belongs to the line-driver and line-receiver category, supports bidirectional serial communication, and eliminates the need for a separate ±12 V supply when only a single +5 V rail is available. The MAX232AMJE/883B combines two drivers and two receivers in one 16-CDIP package. Its +5 V operating supply, through-hole construction, and 0.300-inch, 7.62 mm row spacing suit industrial, telecommunications, instrumentation, and embedded control equipment where a rugged ceramic dual-inline package is preferred. The device supports both point-to-point and multipoint RS-232 communication arrangements. Its mixed-signal operating characteristics determine several practical design constraints. RS-232 drivers use charge-pump circuitry to generate positive and negative line voltages from the +5 V supply, while the receivers detect valid bipolar signals. External bypass and charge-pump capacitors must be connected close to their designated pins, and long cables require attention to capacitive loading, common-mode voltage, ground continuity, and protection from electrostatic discharge. Typical uses include industrial serial consoles, data acquisition systems, test equipment, remote-control interfaces, and legacy peripheral connections. The device is especially relevant where equipment retains an RS-232 port but has moved from ±12 V or ±15 V supplies to a +5 V logic environment. Its military temperature grade also supports equipment intended for extended environmental ranges. For PCB layout, route RS-232 driver and receiver traces as differential pairs where practical, keep the external capacitors compact, and provide adequate ground return current. Protection networks should be placed where cables enter the assembly rather than directly beside the IC. Confirm capacitor type, voltage rating, pinout, and loopback behavior against the manufacturer datasheet before releasing a production layout. This product page combines the manufacturer interface description with practical procurement and engineering guidance, including package information, qualification details, design notes, and a focused drop-in comparison. It is intended to help engineers determine whether the MAX232AMJE/883B fits the electrical, mechanical, environmental, and sourcing requirements of a specific RS-232 design.

RFQ پەیوەندی
MAX232AMLP - 2/2 RS-232 Transceiver, 5V | Analog Devices
MAX232AMLP

MAX232AMLP - 2/2 RS-232 Transceiver, 5V | Analog Devices

The Analog Devices MAX232AMLP is a +5 V-powered, dual-driver and dual-receiver RS-232 transceiver packaged in a 20-pin ceramic LCC package measuring 8.9 mm by 8.9 mm. It converts between TTL/CMOS logic levels and EIA/TIA-232E, V.28, and V.24 serial-interface levels, providing two transmit channels and two receive channels in one device. An RS-232 transceiver is a line-interface IC that bridges the logic-voltage domain used by digital controllers and the bipolar voltage domain used by RS-232 equipment. The MAX232A belongs to the MAX220 through MAX249 family of multichannel line drivers and receivers. Its integrated dual charge-pump voltage converters generate the positive and negative voltages required by RS-232 without requiring an external ±12 V supply. Key features include two RS-232 drivers, two RS-232 receivers, operation from a single +5 V supply, and support for EIA/TIA-232E as well as V.28 and V.24 interfaces. The MAX232AMLP is appropriate when a system must transmit and receive asynchronous serial data between a 5 V logic circuit and an RS-232 port. Its through-hole ceramic package also supports applications that favor a rugged, leaded component over a surface-mount package. The device combines charge-pump generation, driver outputs, and receiver inputs in one interface circuit. Charge-pump circuitry develops the RS-232 voltage rails from the +5 V supply, while the receivers provide the logic-side signaling required by the host controller. The MAX232A family is specifically intended for systems where ±12 V is unavailable, allowing a conventional regulated 5 V supply to serve both logic and interface requirements. Typical uses include industrial serial-port equipment, test and measurement instruments, data acquisition systems, embedded serial adapters, and legacy computer peripherals. Two transmitter channels can support one hardware flow-control path while carrying data on the other, and two receiver channels can accept data and a status signal. Connection to a DB-9 or equivalent connector still requires the appropriate protection, filtering, and signal-routing components required by the target port. When laying out the circuit, treat each driver output as a high-voltage RS-232 node and each receiver input as a sensitive line. Follow the manufacturer datasheet for charge-pump capacitor selection and placement, keep the external components close to their designated pins, and verify the connector-side protection network for the environmental conditions of the equipment. The ceramic LCC footprint and pin assignment must also be checked against the PCB library before assembly. This page consolidates the exact MAX232AMLP package information, interface family characteristics, sourcing references, design guidance, and same-package comparison points. It also identifies where an engineer should consult the Analog Devices datasheet for the exact pin map, temperature range, capacitance values, and qualification attributes before releasing a production design.

RFQ پەیوەندی
MAX232CAWE+T - Dual RS-232 Transceiver | Analog Devices
MAX232CAWE+T

MAX232CAWE+T - Dual RS-232 Transceiver | Analog Devices

Analog Devices MAX232CAWE+T is a dual RS-232 transceiver with two transmitters and two receivers, designed for +5 V-powered equipment and packaged in a 16-pin SOIC. Its electrical operating range extends from -40°C to +125°C, making it suitable for industrial and extended-temperature RS-232 interfaces where reliable bidirectional communication, compact board area, and component availability are important. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible levels and restores RS-232 signals into receiver-compatible logic levels. The MAX232 belongs to the broader serial-interface hierarchy: transceiver IC, interface IC, data-conversion semiconductor, and electronic component. It supports point-to-point serial links between equipment such as test systems, industrial controllers, computers, and service equipment without requiring a separate line driver and receiver for each direction. The MAX232CAWE+T provides two transmit channels and two receive channels in one 16-pin SOIC package. Its +5 V supply arrangement supports conventional RS-232 equipment designs, while the -40°C to +125°C temperature range provides extra margin in industrial environments. The tape-and-reel ordering suffix, +T, supports automated production assembly. MAX3232 family devices can also provide 3.3 V-compatible logic operation, but their logic thresholds and power architecture should be reviewed before using them as substitutions in an existing MAX232 design. The integrated transmitter and receiver structure reduces the component count compared with separate RS-232 interface devices. Each signal path requires supporting passives and protection appropriate to the board environment, but the IC centralizes level translation and line-interface functions. Because RS-232 uses single-ended signaling and relatively large voltage swings, grounding, cable routing, protection, and electrostatic-discharge control remain important system-level considerations. Typical uses include industrial serial controllers, laboratory test equipment, configuration ports, service interfaces, embedded diagnostic links, and legacy peripheral connections. The device is particularly relevant where a compact 16-pin SOIC is preferred and a two-transmitter, two-receiver RS-232 channel count matches the system requirements. The two transmitters can drive separate RS-232 lines, while the two receivers support incoming data or control signals. Designers should use the manufacturer's pin-description table when assigning PCB nets and should place required charge-pump capacitors close to their specified pins. Keep the RS-232 traces away from sensitive analog or high-speed digital paths, provide a stable ground reference, and evaluate external protection for connectors exposed to user-accessible cables. Verify that the connector's signal levels and logic thresholds match the intended downstream equipment. This page combines the MAX232CAWE+T electrical identity, verified sourcing records, extended-temperature capability, same-family drop-in options, application guidance, and PCB-focused design notes. It is intended to help engineers identify the correct package variant, compare suitable replacements, and implement a robust RS-232 interface without confusing different MAX232 temperature grades or package widths.

RFQ پەیوەندی
MAX232ECN - Dual RS-232 Transceiver, ESD Protected | TI
MAX232ECN

MAX232ECN - Dual RS-232 Transceiver, ESD Protected | TI

The Texas Instruments MAX232ECN is a dual-channel RS-232 line driver/receiver transceiver operating from a single 4.5V to 5.5V supply, delivering 250kbps data rates in a 16-pin PDIP (DIP-16) package with enhanced IEC61000-4-2 ESD protection on the RS-232 lines. An RS-232 transceiver is an interface IC that converts TTL/CMOS logic levels (0V to 5V) to the TIA/EIA-232-F voltage levels (approximately +/-5V to +/-15V) required for serial communication between equipment such as terminals, modems, and embedded microcontroller ports. Within the interface IC hierarchy, the MAX232 family is the industry-standard solution for short-haul asynchronous serial links, sitting between a UART and the physical RS-232 cable connector. Key features include a capacitive charge-pump voltage generator that develops the +/-9V RS-232 output swings from a single 5V rail, eliminating the need for bipolar supplies. Each receiver converts RS-232 inputs down to 5V TTL/CMOS levels with a typical 1.3V threshold, 0.5V typical hysteresis for noise immunity, and the ability to withstand +/-30V input swings. The E-grade device adds enhanced ESD robustness per IEC61000-4-2 on the transceiver lines. Architecturally, the part contains two drivers and two receivers (2/2 configuration) plus two charge pumps requiring only four small external capacitors. According to the TI MAX232 datasheet, low operating supply current of typically 8mA makes it practical for battery-backed and industrial serial ports, while the 250kbps maximum data rate covers the vast majority of legacy serial applications. Typical applications include legacy RS-232 ports on industrial equipment, point-of-sale terminals, motor drives and PLC serial debugging consoles, and telecom/modem interfaces. It is the go-to part for adding a robust serial port to a 5V microcontroller such as the PIC24 or XMC families. Design-wise, use four 0.1uF charge-pump capacitors (or follow the capacitor value table in the datasheet for higher data rates), keep the capacitors close to pins 1-6, and place a 1uF bulk capacitor on VCC. Never exceed the +/-30V receiver input rating. This page adds value beyond the datasheet by synthesizing drop-in alternatives, per-application selection guidance, and practical design notes in one place.

RFQ پەیوەندی
MAX232ECPW - 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECPW

MAX232ECPW - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX232ECPW is a 5V dual-channel RS-232 transceiver with two drivers and two receivers, a 250kbps data rate, and a 16-pin TSSOP package. It operates from a 4.5V to 5.5V supply and includes IEC 61000-4-2 electrostatic-discharge protection. An RS-232 transceiver is an interface IC that connects low-voltage TTL or CMOS logic to the bipolar voltage levels used by RS-232 equipment. The driver channels convert logic signals into RS-232 output levels, while the receiver channels convert incoming RS-232 signals into logic-compatible levels. A MAX232E-family device also contains a charge-pump voltage generator, allowing bipolar RS-232 levels to be produced from a single 5V supply. The MAX232ECPW combines two transmit channels, two receive channels, and electrostatic-discharge protection in one compact 16-TSSOP package. Its stated 250kbps rate suits short-distance point-to-point serial links, including industrial-control equipment, data-acquisition systems, service interfaces, and legacy computer peripherals. The integrated protection improves robustness in connector-adjacent circuits where electrostatic discharge is a realistic concern. Technically, the MAX232ECPW is designed for a single 5V supply and combines its charge-pump circuitry, drivers, and receivers in one interface device. The dual-driver and dual-receiver arrangement supports two independent RS-232 directions on a point-to-point link. Its 250kbps maximum signaling rate is substantially faster than conventional asynchronous RS-232 links, although cable length, capacitance, grounding, and driver loading still determine achievable communication distance. Typical uses include programmable-logic-controller service ports, industrial serial adapters, instrumentation control links, embedded-system debug connections, and communications between equipment with legacy DB9 or equivalent RS-232 ports. The MAX232ECPW is particularly appropriate where a compact surface-mount implementation and protected RS-232 line interface are required without a separate external protection network. PCB design should follow the capacitor and charge-pump requirements in the manufacturer datasheet, because the voltage generator depends on correctly sized charge-pump capacitors. Keep the RS-232 connector-side traces away from sensitive logic, provide a low-impedance ground reference, and place input and charge-pump capacitors close to their associated pins. This product page combines the MAX232ECPW electrical characteristics, package information, compatible alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation.

RFQ پەیوەندی
MAX232ECPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX232ECPWR

MAX232ECPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX232ECPWR is a 5V dual-channel RS-232 transceiver with two drivers and two receivers, a 250kbps data rate, and a 16-pin TSSOP package. It operates from a 4.5V to 5.5V supply and includes IEC 61000-4-2 electrostatic-discharge protection. An RS-232 transceiver is an interface IC that connects low-voltage TTL or CMOS logic to the bipolar voltage levels used by RS-232 equipment. The driver channels convert logic signals into RS-232 output levels, while the receiver channels convert incoming RS-232 signals into logic-compatible levels. A MAX232E-family device also contains a charge-pump voltage generator, allowing bipolar RS-232 levels to be produced from a single 5V supply. The MAX232ECPWR combines two transmit channels, two receive channels, and electrostatic-discharge protection in one compact 16-TSSOP package. Its stated 250kbps rate suits short-distance point-to-point serial links, including industrial-control equipment, data-acquisition systems, service interfaces, and legacy computer peripherals. The integrated protection improves robustness in connector-adjacent circuits where electrostatic discharge is a realistic concern. Technically, the MAX232ECPWR is designed for a single 5V supply and combines its charge-pump circuitry, drivers, and receivers in one interface device. The dual-driver and dual-receiver arrangement supports two independent RS-232 directions on a point-to-point link. Its 250kbps maximum signaling rate is substantially faster than conventional asynchronous RS-232 links, although cable length, capacitance, grounding, and driver loading still determine achievable communication distance. Typical uses include programmable-logic-controller service ports, industrial serial adapters, instrumentation control links, embedded-system debug connections, and communications between equipment with legacy DB9 or equivalent RS-232 ports. The MAX232ECPWR is particularly appropriate where a compact surface-mount implementation and protected RS-232 line interface are required without a separate external protection network. PCB design should follow the capacitor and charge-pump requirements in the manufacturer datasheet, because the voltage generator depends on correctly sized charge-pump capacitors. Keep the RS-232 connector-side traces away from sensitive logic, provide a low-impedance ground reference, and place input and charge-pump capacitors close to their associated pins. This product page combines the MAX232ECPWR electrical characteristics, package information, compatible alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation.

RFQ پەیوەندی
MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices
MAX232EEPE+

MAX232EEPE+ - 120kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX232EEPE+ is a dual RS-232 driver and dual receiver interface IC operating from a single 5 V supply at data rates up to 120 kbps, packaged in a 16-pin PDIP. The device translates between TTL/CMOS logic levels and EIA/TIA-232E serial signal levels while providing 15 kV ESD protection on the RS-232 interface. An RS-232 transceiver is an interface IC that bridges digital logic and a serial communications port. The MAX232 belongs to the line-driver and receiver hierarchy used to implement RS-232 and V.28 links where a modern microcontroller or processor uses low-voltage logic rather than the bipolar plus-and-minus voltage levels required by RS-232. Its two transmit channels and two receive channels support full-duplex point-to-point communication when paired with the appropriate serial interface connector and signal conditioning. Key features include two drivers, two receivers, operation from a single 5 V supply, support for data rates up to 120 kbps, and 15 kV ESD protection. The integrated charge-pump circuitry allows the device to generate the RS-232 transmission voltage levels without a separate plus-or-minus 12 V supply. This reduces the external power requirements of equipment that otherwise needs both low-voltage logic power and bipolar RS-232 level generation. The MAX232E family is designed for EIA/TIA-232E and CCITT V.28 communications interfaces, particularly applications where plus or minus 12 V is unavailable. According to the Analog Devices MAX232E product page, the MAX232E is offered in 16-pin TSSOP, narrow SO, wide SO, and DIP packages. The MAX232EEPE+ ordering code selects the 16-pin PDIP package and the E temperature grade, making it suitable for designs assembled with conventional through-hole hardware. Typical uses include industrial serial controllers, point-of-sale equipment, test and measurement instruments, embedded control panels, and legacy peripheral interfaces. The 120 kbps capability is substantially above common asynchronous modem speeds while remaining suitable for RS-232 links to computers, instruments, and industrial controllers. The 2-transmitter, 2-receiver arrangement can support one bidirectional channel or two unidirectional channels depending on how the transmitter and receiver pins are connected. PCB design should account for charge-pump capacitors, supply bypassing, and protection-network placement. Keep the charge-pump capacitors close to their designated pins, provide a low-impedance supply connection, and route communications traces away from clocks, switching regulators, and high-current return paths. Through-hole DIP assembly provides generous lead spacing, but signal integrity still depends on a continuous ground plane and controlled return-current paths. This page combines the confirmed electrical and packaging characteristics with practical RS-232 design guidance, interface alternatives, and application-oriented selection criteria. It also distinguishes genuine package-compatible substitutions from functional alternatives that would require a different footprint or different channel arrangement.

RFQ پەیوەندی
MAX232EIDRG4 - Protected Dual RS-232 Transceiver | Texas Instruments
MAX232EIDRG4

MAX232EIDRG4 - Protected Dual RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX232EIDRG4 is a dual RS-232 driver and receiver with IEC 61000-4-2 protection, operating from a single 5 V supply and supporting data rates to 120 kbit/s. It provides two driver channels and two receiver channels, accepts input levels to ±30 V, and is packaged in a 16-pin SOIC. The integrated protection distinguishes this E-series device from basic RS-232 interface circuits and is intended for ports exposed to electrostatic-discharge transients. An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and a RS-232 link. Within the interface hierarchy, the MAX232EIDRG4 combines a line driver, receiver, charge-pump voltage supply, and electrostatic-discharge protection in one package. It is commonly placed between TTL or CMOS UART circuitry and an external DB9, terminal-block, or cable connection when an RS-232 port requires ± voltage signaling. Key features include two drivers, two receivers, operation from one 5 V supply, and 1.0 µF charge-pump capacitors. The device operates to 120 kbit/s and accepts receiver input voltages of ±30 V. It meets or exceeds TIA/RS-232-F and ITU Recommendation V.28. These characteristics make it suitable for legacy industrial equipment, point-of-sale systems, test instruments, and computer peripherals using asynchronous RS-232 communication. The MAX232 interface architecture uses internal charge pumps to generate the positive and negative voltages required by RS-232 drivers. Separate driver and receiver channels allow two simultaneous communication directions, while the E-series protection network reduces vulnerability to IEC 61000-4-2 discharge events on exposed lines. Because RS-232 is a single-ended, unbalanced interface, board layout, grounding, cable routing, and connector selection remain important to practical signal integrity. Typical uses include configuration links between industrial controllers and service equipment, diagnostic ports on test and measurement systems, serial communication in POS terminals, and legacy computer or peripheral interfaces. In these applications, the device provides the voltage conversion needed by a UART while the system-side logic continues to use normal TTL or CMOS levels. Place the required charge-pump capacitors close to their designated pins and route each protected RS-232 line directly toward its connector. Confirm line polarity, ground continuity, and the voltage rating of the connector before energizing the interface. Review the manufacturer datasheet for the exact external-capacitor values, input thresholds, and protection configuration before releasing a production design.

RFQ پەیوەندی