K4RAH086VB-BIQK - DDR5 16Gb 4800Mbps SDRAM | Samsung
部品番号: K4RAH086VB-BIQK ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.8 | $5.80 |
| 10 | $5.4 | $54.00 |
| 100 | $4.95 | $495.00 |
| 500 | $4.6 | $2,300.00 |
| 1,000 | $4.25 | $4,250.00 |
K4RAH086VB-BIQK 概要
DDR5 SDRAM is the fifth generation of double-data-rate synchronous dynamic random access memory, the commodity memory technology that sits at the core of servers, workstations, desktops, industrial controllers, and AI computing platforms. Within the memory hierarchy, DRAM provides the main high-bandwidth working memory between the CPU and non-volatile storage such as NAND flash. DDR5 improves on DDR4 with on-die ECC, two independent 32-bit (or 40-bit with ECC) channels per DIMM, a 1.1V core supply, and roughly 30% better power efficiency per bit.
Key features of the K4RAH086VB include 16Gb density in a single-die architecture, 4800 Mbps/pin bandwidth enabling 38.4 GB/s per 64-bit channel, a 1.1V nominal core voltage for reduced power, and on-die ECC (ODTE) for improved data integrity. The BIQK speed bin and industrial-relevant qualification make it suitable for memory module makers and embedded designers alike.
Technically, the device operates in DLL-enabled mode per the Samsung DDR5 device operation datasheet, with bank-group architecture, burst lengths of 16 and 32, and command/address signaling (CA) reduced pin count. The 82FBGA ball map follows the JEDEC-standard x8 DDR5 component footprint used across qualified suppliers.
Typical applications include DDR5 RDIMM/DIMM modules for servers, desktop and workstation memory modules, industrial computing modules, AI accelerator memory subsystems, and replacement sourcing for module repair and BOM fills.
Design consideration: DDR5 requires precision fly-by routing with length matching and VDDQ termination; consult Samsung's DDR5 design guide and module design files for reference layouts.
This page synthesizes distributor stock data, drop-in alternatives across Samsung and SK Hynix, and practical design notes not found in the raw datasheet.
ドロップイン代替品: K4RAH086VB-BIQK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: K4RAH086VB-BIQK （同一形状・フットプリント） — 相違点: Data Rate, Interface, Package, Density, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
K4RAH086VB-BCQK
✅ ドロップイン✓ 在庫あり
$41.0156 / 個
データシートを見る →K4RAH086VB-BCWM
✅ ドロップイン✓ 在庫あり
$44.5455 / 個
データシートを見る →K4RAH086VB-BIWM
✅ ドロップイン✓ 在庫あり
$4.85 / 個
データシートを見る →H5CG48MEBDX014N
✅ ドロップイン✓ 在庫あり
$41.68 / 個
データシートを見る →H5CG48AGBDX018N
✅ ドロップイン✓ 在庫あり
$87.42 / 個
データシートを見る →K4RAH086VB-BIQK 最大定格＆電気的特性
| メモリタイプ | DDR5 SDRAM |
| Density | 16 Gb |
| メモリ構成 | 2G x 8 |
| データレート | 4800 Mbps/pin |
| Core Supply Voltage | 1.1 V (nominal) |
| パッケージ | 82FBGA |
| Configuration | X8 |
| Speed Grade | BIQK (-BIQK bin) |
| ECC | On-die ECC (DDR5 standard) |
| インターフェース | DDR5 (CA reduced pin count) |
| Burst Length | 16 / 32 |
| Operating Mode | DLL enabled |
| RoHS ステータス | Compliant (Lead-Free & Halogen-Free per Samsung 82FBGA) |
K4RAH086VB-BIQK 82fbga ピン配置ガイド
K4RAH086VB-BIQK (82fbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: K4RAH086VB-BIQK.
詳細は データシート をご参照ください。
主な用途
K4RAH086VB-BIQK の用途: 6 件s: DDR5 Server Memory Modules (RDIMM/DIMM), Desktop and Workstation PC Memory, Industrial Controllers and Embedded Computing, AI Accelerator and High-Performance Computing Memory, Module Repair and Replacement Sourcing, Networking and Communication Equipment.
DDR5 Server Memory Modules (RDIMM/DIMM)
The K4RAH086VB-BIQK's 16Gb density and 4800 Mbps/pin data rate make it a core building block for DDR5 server RDIMMs, where modules aggregate sixteen to forty of these x8 components to reach 64GB-256GB per module. The 1.1V core supply lowers per-bit power versus DDR4, reducing the module heat load that datacenter cooling must remove, and on-die ECC improves reliability across large memory populations. In a module, these DRAMs connect to the register clock driver and SPD hub on a fly-by command/address bus; the BIQK speed bin supports DDR5-4800-class platforms. Designers should follow Samsung module design rules for length matching and VDDQ termination.
おすすめ
Desktop and Workstation PC Memory
Consumer and professional desktop platforms on DDR5-4800-class memory controllers use the K4RAH086VB-BIQK in UDIMM modules, where sixteen x8 components form a 32GB dual-rank module. The 4800 Mbps bin matches the JEDEC default boot speed of first-generation DDR5 platforms, ensuring plug-and-play compatibility without overclocking profiles. The 82FBGA package with lead-free, halogen-free balls meets consumer environmental regulations, and on-die ECC reduces uncorrectable error rates versus DDR4 at the same price point. Module makers should validate BIQK timing against Intel and AMD memory reference specs and program SPD correctly for the speed bin used.
おすすめ
Industrial Controllers and Embedded Computing
Industrial controllers, edge computing modules, and embedded logging systems adopt DDR5 for its power efficiency and density. The K4RAH086VB-BIQK's 1.1V supply reduces dissipation in sealed enclosures with passive cooling, while on-die ECC protects against soft errors in long-lifetime deployments. GlobalSpec identifies the K4RAH086VB family for industrial controllers, computing modules, and firmware boot/logging storage. Embedded designers typically solder these DRAMs directly on COM Express or SMARC carrier boards; the 82FBGA landing pattern follows JEDEC DDR5 component standards. Verify the operating temperature range for the chosen speed bin and derate data rate at elevated ambient temperature per Samsung's industrial guidance.
おすすめ
AI Accelerator and High-Performance Computing Memory
AI training and inference cards require large, high-bandwidth working memory, and DDR5 components such as the K4RAH086VB-BIQK provide cost-effective capacity alongside HBM. At 4800 Mbps per pin, a 64-bit DDR5 interface delivers 38.4 GB/s, sufficient for model weight buffering, batch queuing, and host-side dataset staging in AI appliances. The 16Gb single-die density maximizes capacity per PCB area under the 82FBGA footprint, and the htelec.com DDR5 comparison guide explicitly lists this family for AI computing designs. Designers should budget power delivery for simultaneous read/write activity across all bank groups and follow Samsung DDR5 routing guidelines for signal integrity at speed.
おすすめ
Module Repair and Replacement Sourcing
Independent distributors stock the K4RAH086VB-BIQK for memory module repair, BOM fills, and replacement sourcing on server and workstation platforms. Wolfchip listed 25,395 pcs in stock (Jul 29, 2026) and Octopart Canada aggregated 47,360 pcs (Mar 16, 2026), giving repair shops supply continuity for DDR5-4800 modules. Because Samsung x8 DDR5 components share the JEDEC 82-ball ball map, SK Hynix H5CG48MEBDX014N devices can substitute on the same PCB when Samsung stock runs out. Repair technicians must re-ball with lead-free solder, respect MSL baking requirements, and reprogram SPD data consistent with the installed component's speed bin.
おすすめ
Networking and Communication Equipment
Routers, switches, and 5G network appliances use DDR5 main memory for packet buffering, route tables, and control-plane software. The K4RAH086VB-BIQK's 16Gb density allows 4GB-8GB memory footprints with few components, simplifying thermal design in 1U chassis, while 4800 Mbps bandwidth supports line-rate packet processing on mid-range platforms. The 1.1V rail improves power budget headroom in always-on network equipment, where the htelec.com comparison guide also positions this DDR5 16Gb class for industrial systems and server appliances. Designers should implement proper fly-by CA routing with per-drop stub tuning and validate refresh behavior under sustained thermal loads typical of telecom racks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: K4RAH086VB-BIQK — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | K4RAH086VB-BCQK | K4RAH086VB-BIWM | H5CG48MEBDX014N |
|---|---|---|---|---|
| Package | 82FBGA | 82FBGA - same | 82FBGA - same | 82FBGA - same JEDEC ball map |
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | SK Hynix |
| Memory Type | DDR5 SDRAM | DDR5 SDRAM | DDR5 SDRAM | DDR5 SDRAM |
| Density | 16 Gb | 16 Gb | 16 Gb | 16 Gb |
| Data Rate | 4800 Mbps/pin | 4800 Mbps/pin | 5600 Mbps/pin | 4800 Mbps class |
| Core Supply Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| ECC | On-die ECC | On-die ECC | On-die ECC | On-die ECC (DDR5 standard) |
主な差別化要因
- High-speed mainstream bin at lower cost than faster grades （vs K4RAH086VB-BIWM)
- Multi-source substitution within identical footprint （vs H5CG48MEBDX014N)
- Same-die speed-bin flexibility （vs K4RAH086VB-BCQK)
設計ノート
DDR5-4800 signals demand strict fly-by routing of the command/address bus with controlled per-drop stub lengths, and length-matched DQ/DQS within spec tolerances (typically a few mils per inch of trace per Samsung module design rules). Use ODT settings from the Samsung DDR5 datasheet and reference Intel/AMD platform memory design guides for board-level termination. For x8 components on DIMMs, keep DQ trace impedance at 40 ohms nominal per module spec and simulate eye diagrams at 4800 Mbps before tape-out.
The K4RAH086VB-BIQK operates from a 1.1V VDD core with separate VDDQ rails per DDR5 standard. Estimated: a fully populated 32GB module with sixteen 16Gb devices can draw several watts at 4800 Mbps under continuous read/write, so size the VDDQ VRM and power-plane copper for peak burst currents plus margin, and place bulk capacitance near each DRAM cluster with 0.1uF decoupling per ball-group as recommended in Samsung DDR5 power delivery guidelines.
The 82FBGA requires an exact JEDEC DDR5 x8 landing pattern; follow Samsung's package outline drawing for pad geometry and solder-mask definition. Handle MSL-controlled BGA inventory correctly - bake per JEDEC J-STD-033 guidance before reflow if floor-life is exceeded, and use lead-free reflow profiles compatible with BGA solder balls. For repair substitution with cross-brand parts such as SK Hynix H5CG48MEBDX014N, the ball map is identical, but reprogram SPD to match the installed component's speed bin.
Do not mix speed bins (BIQK vs BIWM/BCWM) on the same memory channel - the controller trains to the slowest common denominator and mixed-bin modules may fail training or run below rated speed. Also confirm the part is in DLL-enabled mode per the Samsung Rev 1.0 specification, and never exceed the 1.1V +/- tolerance on VDD; DDR5 devices lack the voltage tolerance headroom of DDR3-era DRAM.
コンプライアンス情報
Samsung 16Gb DDR5 spec Rev 1.0 states the 82FBGA package is Lead-Free & Halogen-Free (RoHS compliant). REACH, conflict minerals, and AEC-Q100 status not stated in provided data.
