H5AN4G8NBJR-UHC - 4Gb DDR4 SDRAM 2400, 1.2V | SK Hynix
부품 번호: H5AN4G8NBJR-UHC ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.9 | $5.90 |
| 10 | $5.31 | $53.10 |
| 100 | $4.75 | $475.00 |
| 500 | $4.02 | $2,010.00 |
| 1,000 | $3.18 | $3,180.00 |
H5AN4G8NBJR-UHC 개요
DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random Access Memory) is the fourth generation of the DDR DRAM family defined by the JEDEC DDR4 standard. It sits within the memory IC hierarchy: DRAM -> synchronous DRAM (SDRAM) -> DDR SDRAM -> DDR4 SDRAM. Compared with DDR3, DDR4 lowers operating voltage from 1.5V/1.35V to 1.2V, doubles bank groups to improve effective bandwidth, and raises data rates up to 3200 Mbps, making it the dominant main-memory technology for embedded and consumer computing platforms.
Key features of the H5AN4G8NBJR-UHC include a 4Gb density organized as 512M x 8, DDR4-2400 speed grade operation, 1.2V core supply, and a compact 78-ball FBGA footprint that is pinout-standardized across the DRAM industry, simplifying second-sourcing. The device supports standard DDR4 features such as bank-group architecture, on-die termination, and DLL-based timing per the JEDEC DDR4 specification.
Architecturally, the die uses SK Hynix CMOS DRAM process technology with an 8n-class bank structure delivering the 4Gb capacity in the x8 organization. The 78-ball TFBGA package minimizes signal-path length for improved signal integrity at 2400 Mbps, and the ball map follows the JEDEC-standard DDR4 x8 component footprint, which enables drop-in assembly on any DDR4 x8 DIMM or onboard-memory land pattern.
Typical applications include consumer desktop and notebook main memory, set-top boxes, smart TVs, networking equipment, industrial control memory, and embedded x86/ARM platforms where 4Gb x8 DDR4 components are populated on-module or on-board. The device is well suited for memory modules and soldered-down memory subsystems alike.
When designing this part into a DDR4 subsystem, ensure controller training covers write-leveling, VrefDQ calibration, and read training, and follow the recommended termination and routing rules (length-matched fly-by command/address routing, on-die termination enabled). Verify the exact -UHC speed-grade binning parameters in the manufacturer datasheet before timing closure.
This page synthesizes distributor pricing from LCSC/JLCPCB, drop-in DDR4 alternatives across SK Hynix, Micron, and Samsung, and practical DDR4 design notes not found in a single datasheet, giving engineers a complete second-source and design-in reference.
드롭인 대체품: H5AN4G8NBJR-UHC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: H5AN4G8NBJR-UHC (동일 폼 팩터 및 풋프린트) — 차이점: Package, Data Rate, Interface, Organization, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
H5AN4G8NBJR-RDC
✅ 드롭인✓ 재고 있음
$2.95 / 개
데이터시트 보기 →H5AN4G8NBJR-PBC
✅ 드롭인✓ 재고 있음
$2.2 / 개
데이터시트 보기 →H5AN4G8NBJR-XNI
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MT40A512M8RH-083E
✅ 드롭인✓ 재고 있음
$3.3 / 개
데이터시트 보기 →K4A4G085WD-BCTD
✅ 드롭인✓ 재고 있음
$2.05 / 개
데이터시트 보기 →MT40A1G8AG-062E
✅ 드롭인✓ 재고 있음
$3.1 / 개
데이터시트 보기 →K4A8G085WC-BCRC
✅ 드롭인✓ 재고 있음
$4.3 / 개
데이터시트 보기 →H5AN4G8NBJR-UHC 최대 정격 & 전기적 특성
| 메모리 유형 | DDR4 SDRAM |
| Density | 4 Gbit |
| 메모리 구성 | 512M x 8 |
| 데이터 속도 | 2400 Mbps (PC2400) |
| 공급 전압 | 1.2 V |
| 인터페이스 | DDR4 (JEDEC) |
| 패키지 | TFBGA-78 (11 x 7.5 mm) |
| 실장 유형 | Surface Mount |
| Technology | CMOS DRAM |
| Lifecycle Code | Active |
| RoHS 상태 | Compliant (Rohs Code: Yes) |
| REACH Compliance | Compliant |
| Manufacturer | SK Hynix Inc. |
H5AN4G8NBJR-UHC tfbga-78 (11 x 7.5 mm) 핀 구성 가이드
H5AN4G8NBJR-UHC(tfbga-78 (11 x 7.5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: H5AN4G8NBJR-UHC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
H5AN4G8NBJR-UHC 적합 용도: 6 애플리케이션s: Consumer Main Memory (Desktop/Notebook), Smart TV and Set-Top Box, Networking and Communications Equipment, Embedded x86 and ARM Computing, Gaming and Consumer Electronics Consoles, Industrial Control and IoT Gateways.
Consumer Main Memory (Desktop/Notebook)
The H5AN4G8NBJR-UHC is designed primarily for main-memory applications requiring large density and high bandwidth, per the H5AN4GxNBJR series datasheet. As a 4Gb 512M x 8 DDR4 running at 2400 Mbps on a 1.2V rail, eight devices in parallel form a 4GB-wide x64 module channel delivering 19.2 GB/s theoretical bandwidth at PC2400. The JEDEC-standard 78-ball FBGA footprint means module PCBs qualified for one vendor's x8 DDR4 accept this part without layout change. Write leveling, VrefDQ training, and fly-by CA routing per DDR4 design rules are required during board bring-up.
추천
Smart TV and Set-Top Box
Smart TVs and set-top boxes use 4Gb DDR4 x8 components like the H5AN4G8NBJR-UHC as the main working memory for SoC-based video decoding. Its 2400 Mbps data rate provides sufficient bandwidth for 4K video buffering while the 1.2V supply keeps DRAM power within the tight consumer thermal budget of sealed enclosures. The 78-ball TFBGA (11 x 7.5 mm) fits the compact two- or four-chip onboard memory configurations typical of these platforms. The JEDEC-standard x8 ball map allows easy substitution with SK Hynix sibling bins or Micron/Samsung equivalents during cost-down cycles without PCB respin.
추천
Networking and Communications Equipment
Edge routers, switches, and access points populate 4Gb DDR4 x8 devices such as the H5AN4G8NBJR-UHC as packet-buffer and control-plane memory. The DDR4-2400 interface provides the low-latency, high-bandwidth access that network processors require for deep packet buffering, and multiple x8 devices are ganged to form wider buses matching 32-bit or 64-bit NP/memory-controller data paths. Designers should follow fly-by clock/address routing with on-die termination to preserve signal integrity at 2400 Mbps, and should verify that the selected suffix bin meets the industrial or commercial temperature range required by the enclosure environment.
추천
Embedded x86 and ARM Computing
Embedded computing platforms - industrial PCs, digital signage players, and ARM server blades - solder down DDR4 x8 components like the H5AN4G8NBJR-UHC directly on the CPU board, avoiding SO-DIMM connectors for reliability and cost. Four devices provide 2 GB of 64-bit DDR4-2400 memory, adequate for lightweight Linux and Windows IoT workloads. Because the 78-ball FBGA ball map is JEDEC-standardized, BOM optimization between SK Hynix, Micron, and Samsung 4Gb x8 parts is possible over the product lifecycle. Memory-controller training parameters (zq calibration, write leveling) should be re-profiled per vendor for margin.
추천
Gaming and Consumer Electronics Consoles
Game consoles, streaming media players, and arcade systems rely on DDR4 components in the 4Gb x8 class for main system memory where the H5AN4G8NBJR-UHC's 2400 Mbps rate and 512M x 8 organization match the memory-controller configurations of mainstream SoCs. The consumer suffix bin offers attractive cost versus industrial bins, appropriate for climate-controlled consumer environments. Designers exploiting the JEDEC 78-ball footprint can dual-source with Micron MT40A512M8RH-083E or Samsung K4A4G085WD devices to mitigate commodity DRAM allocation cycles without changing the assembly stencil or reflow profile.
추천
Industrial Control and IoT Gateways
Industrial gateways and control systems use the H5AN4G8NBJR-UHC or its industrial-temperature siblings as main memory for edge-analytics and protocol-conversion workloads. Where ambient temperatures exceed the consumer bin's range, the same-family H5AN4G8NBJR-XNI industrial suffix provides extended temperature capability on the identical 78-ball TFBGA footprint, so one PCB supports both commercial and industrial SKUs. The 1.2V DDR4 rail simplifies power-tree design from 5V or 24V industrial supplies through a single buck converter plus VTT termination regulator. Rerun controller training when interchanging vendors or suffix bins.
추천
추천 제품 요약
엔지니어링 참조 데이터: H5AN4G8NBJR-UHC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | H5AN4G8NBJR-RDC | H5AN4G8NBJR-XNI | MT40A512M8RH-083E | K4A4G085WD-BCTD | MT40A1G8AG-062E |
|---|---|---|---|---|---|---|
| Package | TFBGA-78 (11 x 7.5 mm) | TFBGA-78 - same | TFBGA-78 - same | FBGA-78 - same JEDEC footprint | FBGA-78 - same JEDEC footprint | FBGA-78 - same JEDEC footprint |
| Brand | SK Hynix | SK Hynix | SK Hynix | Micron Technology | Samsung Electronics | Micron Technology |
| Density | 4 Gbit | 4 Gbit | 4 Gbit | 4 Gbit | 4 Gbit | 8 Gbit (2x) |
| Organization | 512M x 8 | 512M x 8 | 512M x 8 | 512M x 8 | 512M x 8 | 1G x 8 |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant | Compliant |
주요 차별점
- Cost-optimized consumer bin for high-volume builds (vs H5AN4G8NBJR-XNI)
- Cross-brand second-source availability (vs MT40A512M8RH-083E)
- Balanced density-bandwidth point (vs MT40A1G8AG-062E)
설계 노트
For DDR4-2400 operation with the H5AN4G8NBJR-UHC, route command/address/control lines in fly-by topology with on-die termination (RTT_NOM/RTT_WR) enabled, and length-match data groups per byte lane to within +/-25 mil skew (estimated; follow your controller's layout guideline, e.g., Intel/AMD DDR4 routing rules). Use ODT settings from the controller training algorithm rather than fixed values. Keep DQ/DM/DQS traces on an unbroken reference plane; the 78-ball TFBGA breakout typically requires 4 or more layers with dedicated VDDQ (1.2V) and VTT planes.
The device operates from a 1.2V VDD/VDDQ supply; VTT termination (roughly 0.6V, half of VDDQ) requires a dedicated sinking/sourcing LDO such as a VTT terminator sized for termination currents during bus turnaround. Estimated: an 8-device x8 DDR4-2400 bus can demand several amps of transient VTT current, so select the VTT regulator for peak, not average, load. Decouple each ball-group with at least one 0.1 uF ceramic capacitor plus bulk 22-47 uF per device, placed close to the VDD balls.
Do not interchange suffix bins (-UHC vs -PBC vs -RDC) without verifying the speed-bin timing table in the H5AN4GxNBJR series datasheet: CAS Latency, tRCD, tRP, and supported data rates differ by suffix. After any vendor or bin substitution (e.g., swapping in Micron MT40A512M8RH-083E), rerun full memory training - write leveling, read training, VrefDQ - because per-vendor DQ timing skews differ. Also confirm the address mapping (512M x 8) matches controller row/column/bank configuration; a denser 8Gb drop-in changes row addresses.
규정 준수 정보
Rohs Code: Yes and REACH compliance reported by Worldway distributor data; JLCPCB lists the part as ROHS. AEC-Q100 qualification not stated - this is a consumer DDR4 series.
