EP1K30FI256-2N - 30K Gate ACEX-1K FPGA, 256-BGA | Intel / Altera
N.º da peça: EP1K30FI256-2N ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $28.75 | $2.875,00 |
| 500 | $22.1 | $11.050,00 |
| 1.000 | $18.4 | $18.400,00 |
EP1K30FI256-2N Visão geral
An FPGA (Field Programmable Gate Array) is a type of programmable logic device that combines a matrix of configurable logic blocks (CLBs), programmable interconnect, and I/O cells on a single silicon die. FPGAs occupy the top of the programmable logic taxonomy: FPGA -> programmable logic device (PLD) -> logic IC -> integrated circuit -> semiconductor. ACEX-1K specifically targets low-cost system-on-a-programmable-chip (SOPC) integration, allowing designers to implement embedded memory blocks, megafunctions, and DSP-style logic on one device, supplanting discrete logic ICs in many cost-sensitive designs.
Key features of the EP1K30FI256-2N include dual-port embedded array blocks (EABs) for efficient memory and specialized logic functions, an enhanced embedded array architecture, in-system programmability via IEEE 1149.1 JTAG, and a maximum internal operating frequency of 200 MHz. The 256-ball FineLine BGA package offers a compact footprint suitable for high-density boards while providing ample I/O for parallel buses, memory interfaces, and high-speed glue logic.
Typical applications span glue logic replacement, interface bridging, custom peripheral controllers, industrial control subsystems, and low-cost ASIC prototyping. The combination of dual-port EAB memory, 171 user I/Os, and a 2.5 V core makes it well suited to designs requiring moderate logic density and on-chip RAM without migrating to higher-cost Cyclone or Arria families.
When designing with this device, verify that the Quartus toolchain version supports the ACEX-1K family and that the board-level decoupling scheme supplies clean 2.5 V to the core. Since ACEX-1K is a legacy family, plan for long-term availability risk by validating second sources before committing to high-volume production.
Alternativas drop-in para EP1K30FI256-2N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com EP1K30FI256-2N (mesmo formato e footprint) — diferindo em Package, Speed Grade, Total RAM Bits, Process Technology, Core Supply Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
EP1K30FI256-2
✅ Drop-In✓ Em estoque
$18.2 / unidade
Ver ficha técnica →EP1K30FC256-2N
✅ Drop-In✓ Em estoque
$21.45 / unidade
Ver ficha técnica →EP1K30FC256-3N
✅ Drop-In✓ Em estoque
$17.5 / unidade
Ver ficha técnica →EP1K30FC256-3
✅ Drop-In✓ Em estoque
$11.1 / unidade
Ver ficha técnica →EP1K30FC256-2
✅ Drop-In✓ Em estoque
$22.95 / unidade
Ver ficha técnica →EP1K30F256-3
✅ Drop-In✓ Em estoque
$15.6 / unidade
Ver ficha técnica →EP1K10FI256-2N
✅ Drop-In✓ Em estoque
$17.95 / unidade
Ver ficha técnica →EP1K100FI256-2N
✅ Drop-In✓ Em estoque
$55.8 / unidade
Ver ficha técnica →EP1K30FI256-2N Classificações máximas e características elétricas
| Family | ACEX-1K |
| Typical Gates | 30,000 |
| Logic Elements (LEs) | 1,728 |
| Embedded RAM Bits | 24,576 |
| Maximum User I/O | 171 |
| Process Technology | 0.22 µm CMOS |
| Core Supply Voltage | 2.5 V |
| Maximum Internal Frequency | 200 MHz |
| Number of LABs | 216 |
| Encapsulamento | 256-ball FineLine BGA (FBGA) |
| Tipo de montagem | Surface Mount |
| Operating Temperature Grade | Industrial |
| Speed Grade | -2 |
| Programmable via | JTAG (IEEE 1149.1) |
| Tipo de memória | Dual-port Embedded Array Block (EAB) |
Guia de Configuração de Pinos do EP1K30FI256-2N 256-ball fineline bga (fbga)
Configuração de pinos para EP1K30FI256-2N (pacote 256-ball fineline bga (fbga)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para EP1K30FI256-2N.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
EP1K30FI256-2N é adequado para 7 aplicaçãos: Industrial Glue Logic Replacement, ASIC Prototyping and Emulation, Interface Bridging and Protocol Conversion, Legacy Telecommunications Equipment Maintenance, Test and Measurement Instrumentation, Custom Peripheral Controllers, Educational FPGA Development Boards.
Industrial Glue Logic Replacement
The EP1K30FI256-2N's 1,728 logic elements and 171 user I/Os make it ideal for replacing multiple discrete logic ICs in industrial control boards. Its 2.5 V core operates reliably across -40 °C to +85 °C, and dual-port EABs (24,576 RAM bits) can replace small SRAM/DRAM glue chips. The 256-ball FineLine BGA package consolidates wide bus interfaces (16/32-bit data, 24-bit address) into a compact footprint, while 200 MHz internal operation supports moderate-rate state machines, custom peripherals, and proprietary bus protocols (e.g., legacy fieldbus, custom parallel camera links) without driving BOM cost.
Recomendado
ASIC Prototyping and Emulation
Engineers use the EP1K30FI256-2N as an ASIC prototype for low-density custom silicon designs because its 30K gates and 24,576 RAM bits fit typical controller-class ASICs. Quartus II synthesis maps RTL to the ACEX-1K architecture, letting designers validate state machines and bus interfaces before committing to mask ROM. The 200 MHz internal frequency and JTAG-driven in-system programmability accelerate bring-up, while 171 user I/Os provide ample real-world signal access. This makes the EP1K30FI256-2N a stepping stone in design flows where Cyclone IV or Cyclone 10 LP would be the eventual migration target.
Recomendado
Interface Bridging and Protocol Conversion
The EP1K30FI256-2N excels at bridging legacy parallel buses (ISA, VME, custom 16/32-bit interfaces) to modern serial standards, with 171 user I/Os accepting multiple LVTTL/LVCMOS banks concurrently. Designers can implement custom state machines and FIFOs in the dual-port EABs, mapping protocol stacks (UART, SPI, I2C, parallel video) without external glue logic. The 200 MHz internal clock rate is sufficient for typical 50-100 MHz bus bridging. The industrial temperature grade and 256-ball BGA footprint suit embedded industrial PC and test instrumentation applications where pin density matters.
Recomendado
Legacy Telecommunications Equipment Maintenance
The EP1K30FI256-2N is used to maintain legacy telecom infrastructure where system lifetimes exceed 15 years. Its dual-port EAB RAM enables custom packet buffering and framing logic, while 171 user I/Os accommodate TDM bus interfaces and parallel control planes. The 2.5 V core and industrial temperature range meet NEBS-style reliability expectations. Service providers and telecom OEMs source the EP1K30FI256-2N through authorized remaining-stock and broker channels to support fielded systems, making lifecycle-aware design critical when planning long-term spares.
Recomendado
Test and Measurement Instrumentation
The EP1K30FI256-2N is well-suited to custom digital test instruments that require parallel bus capture, custom triggering logic, and on-chip memory for sample buffering. The 1,728 LEs and 24,576 EAB bits let designers implement up to 32-channel logic analyzers, pattern generators, and protocol exercisers in a single device. The 171 user I/Os provide generous probe points for parallel digital buses, while the 256-ball BGA package supports compact instrument form factors. Quartus II toolchain and JTAG programming simplify factory calibration and firmware updates.
Recomendado
Custom Peripheral Controllers
The EP1K30FI256-2N provides a flexible platform for building custom peripheral controllers (motor control, LED drivers, sensor aggregation) where off-the-shelf microcontrollers lack specific I/O combinations. Its 171 user I/Os support many simultaneous sensor channels, while dual-port EABs enable small buffer FIFOs for streaming data. The 200 MHz internal frequency accommodates DSP-style filter blocks at audio and low-rate control loop frequencies. Industrial temperature grading and the rugged BGA package suit factory-floor deployment, and JTAG-based in-system programming simplifies firmware updates.
Recomendado
Educational FPGA Development Boards
The EP1K30FI256-2N is occasionally used in legacy educational FPGA development platforms because its 1,728 LEs and dual-port EABs offer ample resources for student lab exercises (counter design, UART implementation, VGA drivers). Its 256-ball BGA package and 171 user I/Os support breadboard-friendly breakout boards with banks of LEDs, switches, and 7-segment displays. The 200 MHz internal frequency is sufficient for typical teaching designs, and Quartus II Web Edition toolchain (legacy version) supports ACEX-1K targets. Note: new courses should adopt Cyclone IV or Cyclone 10 LP dev kits instead.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para EP1K30FI256-2N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | EP1K30FI256-2 | EP1K30FC256-2N | EP1K30FC256-3N | EP1K30FC256-3 | EP1K30F256-3 |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 256-ball FineLine BGA | 256-ball FineLine BGA - same | 256-ball FineLine BGA - same | 256-ball FineLine BGA - same | 256-ball FineLine BGA - same | 256-ball FineLine BGA - same |
| Family | ACEX-1K | ACEX-1K | ACEX-1K | ACEX-1K | ACEX-1K | ACEX-1K |
| Typical Gates | 30,000 | 30,000 | 30,000 | 30,000 | 30,000 | 30,000 |
| Logic Elements | 1,728 | 1,728 | 1,728 | 1,728 | 1,728 | 1,728 |
| RAM Bits | 24,576 | 24,576 | 24,576 | 24,576 | 24,576 | 24,576 |
| Maximum User I/O | 171 | 171 | 171 | 171 | 171 | 171 |
| Speed Grade | -2 | -2 | -2 | -3 (faster) | -3 (faster) | -3 (faster) |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Operating Temperature | Industrial (-40 °C to +85 °C) | Industrial (-40 °C to +85 °C) | Industrial (-40 °C to +85 °C) | Industrial (-40 °C to +85 °C) | Commercial/Industrial | Industrial |
Principais diferenciais
- Same-family -2 speed grade with industrial temperature rating in lead-free packaging (vs EP1K30FI256-2)
- Faster -3 speed grade option exists in same 256-ball FBGA footprint (vs EP1K30FC256-3N)
- Higher-density 100K-gate ACEX-1K option exists in same package (vs EP1K100FI256-2N)
Notas de projeto
The EP1K30FI256-2N requires a clean 2.5 V core supply capable of sourcing up to 300-500 mA during configuration and high-activity operation. Place 0.1 µF and 10 µF decoupling capacitors as close as possible to each VCCINT and VCCIO power ball pair, distributed across the BGA footprint. Power sequencing is not strictly required for ACEX-1K, but bringing up the 2.5 V rail before driving JTAG signals prevents in-system programming errors. Estimate: a heavily loaded 30K-gate design can draw 200-400 mA steady-state at 100 MHz internal clock.
The 256-ball FineLine BGA package has a 1.0 mm ball pitch, demanding 4-6 layer PCB stack-up with microvia or via-in-pad technology for reliable assembly. Use 0.5 oz copper outer layers and 1 oz inner power planes; route differential pairs and clocks on inner stripline layers with controlled impedance (50 Ω single-ended, 100 Ω differential). Estimate: a properly designed BGA breakout adds 8-12 mm to board area versus a QFP-256 footprint, so allocate BGA escape channels before finalizing schematic symbol.
Avoid driving JTAG signals (TDI, TDO, TMS, TCK) before the 2.5 V core supply has stabilized, which can cause configuration failure or non-volatile memory corruption in the device's configuration SRAM. Do not exceed the 2.5 V core voltage tolerance (±5%); over-voltage damages the 0.22 µm CMOS core. Verify that the Quartus II version supports ACEX-1K (legacy support through Quartus II 13.0sp1; newer Quartus Prime does NOT support ACEX-1K, requiring older toolchain installation).
ACEX-1K I/O buffers are unterminated; for high-speed buses (>50 MHz) or long traces (>50 mm), add source-series termination (22-33 Ω) at the FPGA output to dampen reflections. The 171 user I/Os are organized into four I/O banks, each with its own VCCIO rail supporting mixed voltage standards (LVTTL, LVCMOS, PCI). Do not mix 5 V PCI and 3.3 V LVTTL in the same bank. Estimate: a 32-bit DDR-style bus at 100 MHz on 75 mm traces requires 22 Ω source termination to keep overshoot below 0.5 V.
Informações de conformidade
EP1K30FI256-2N has the 'N' suffix indicating lead-free (Pb-free) packaging per Altera's legacy naming. AEC-Q100 is not applicable as this is an FPGA logic device, not an automotive-qualified analog/power part. REACH, halogen-free, and conflict minerals status not stated in available web data.
