K4A8G085WB-BCPB - 8Gb DDR4 SDRAM 3200Mbps | Samsung
MPN: K4A8G085WB-BCPB ✓ Aktif| Kwantitas | Harga Satuan | Lengkap |
|---|---|---|
| 1 | $23.625 | $23,63 |
| 10 | $17.0625 | $170,63 |
| 100 | $15.0937 | $1.509,37 |
| 500 | $14.4375 | $7.218,75 |
| 1.000 | $13.7813 | $13.781,30 |
K4A8G085WB-BCPB Ringkasan
DDR4 SDRAM (Double Data Rate 4 Synchronous Dynamic Random Access Memory) is a volatile memory technology that transfers data on both rising and falling edges of the clock, doubling the effective data rate. Within the memory hierarchy it sits below the memory controller and above storage, serving as main system memory. DDR4 succeeded DDR3 by lowering the core supply from 1.5V to 1.2V (up to 40% power reduction), increasing bank count from 8 to 16 via bank groups, and raising densities to 8Gb and beyond.
Key features of the K4A8G085WB-BCPB include the 3200 Mbps data rate (BC speed grade), CAS Latency 22, burst length 8, and 16 banks in 4 bank groups for improved parallelism. On-die termination (ODT) and dynamic ODT improve signal integrity, while temperature-compensated self-refresh (TCSR) reduces standby power.
The device is fabricated on Samsung's advanced DRAM process (B-die generation) and supports programmable read latency (RL) and write latency (WL). It runs from a 1.2V supply (nominal) with refresh intervals of 7.8 us up to 85C operating temperature. DLL-enabled mode operation ensures precise output timing across the speed range.
Typical applications include desktop and laptop DIMMs, embedded computing boards, industrial PCs, networking equipment, and test instrumentation requiring high bandwidth in a compact footprint.
When designing in this component, match memory controller timing parameters (CL22 at 3200 Mbps), place decoupling capacitors close to the power balls, and follow the length-matched fly-by routing of DDR4 for CK/CA/DQS nets.
This page adds distributor pricing data, drop-in alternatives within the same Samsung DDR4 x8 family, and cross-brand equivalents (SK Hynix, Micron, Nanya) not found in the manufacturer datasheet alone.
Alternatif penggantian untuk K4A8G085WB-BCPB — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian K4A8G085WB-BCPB (sama faktor bentuk dan footprint) — berbeda di dalam Package, Data Rate, Density, Operating Temperature, Organization.
Alat Perbandingan Cepat — Pilih bagian alternatif untuk perbandingan paralel:
K4A8G085WB-BCRC
Kontak untuk harga
Lihat Datasheet →K4A8G085WB-BITD
Kontak untuk harga
Lihat Datasheet →K4A8G085WB-BIWE
Kontak untuk harga
Lihat Datasheet →K4A8G085WC-BCTD
Kontak untuk harga
Lihat Datasheet →K4A8G085WC-BIWE
Kontak untuk harga
Lihat Datasheet →H5AN8G8NDJR
Kontak untuk harga
Lihat Datasheet →MT40A1G8WE-075E
Kontak untuk harga
Lihat Datasheet →K4A8G085WB-BCPB Rating Maksimal & Karakteristik Listrik
| Tipe Memori | DDR4 SDRAM |
| Density | 8 Gbit |
| Organisasi | 1G x 8 |
| Tegangan Pemuat | 1.2 V (nominal) |
| Laju Data | 3200 Mbps (PC4-25600) |
| Speed Grade | BC |
| CAS Latency (CL) | 22 |
| Burst Length | 8 |
| Bank Architecture | 16 banks (4 bank groups) |
| Refresh Interval | 7.8 us (up to 85C) |
| Tipe Antarmuka | SSTL-12 |
| Termination | ODT / dynamic ODT |
| Self-Refresh | Temperature-Compensated Self-Refresh (TCSR) |
| Paket | 78-ball FBGA |
| Package Dimensions | 11 mm x 11 mm |
| Tipe Mounting | Surface Mount (BGA) |
| Operating Mode | DLL enabled |
| Status RoHS | Compliant |
Konfigurasi Pin K4A8G085WB-BCPB
| Pin produk A1 | DQ0 — Data I/O bit 0 |
| Pin produk A2 | DQ1 — Data I/O bit 1 |
| Pin produk A3 | DQ2 — Data I/O bit 2 |
| Pin produk A7 | DQ3 — Data I/O bit 3 |
| Pin produk A8 | DQ4 — Data I/O bit 4 |
| Pin produk A9 | DQ5 — Data I/O bit 5 |
| Pin produk B7 | DQ6 — Data I/O bit 6 |
| Pin produk B8 | DQ7 — Data I/O bit 7 |
| Pin produk B9 | DM — Data input mask |
| Pin produk A4 | TDQS — Termination data strobe (tied to DQS in x8) |
| Pin produk B5 | TDQS# — Termination data strobe complement |
| Pin produk A5 | DQS — Data strobe |
| Pin produk B6 | DQS# — Data strobe complement |
| Pin produk C2 | A0 — Address input 0 |
| Pin produk C7 | A1 — Address input 1 |
| Pin produk C8 | A2 — Address input 2 |
| Pin produk D2 | A3 — Address input 3 |
| Pin produk D7 | A4 — Address input 4 |
| Pin produk D8 | A5 — Address input 5 |
| Pin produk E2 | A6 — Address input 6 |
| Pin produk E7 | A7 — Address input 7 |
| Pin produk E8 | A8 — Address input 8 |
| Pin produk F2 | A9 — Address input 9 |
| Pin produk F7 | A10 — Address input 10 / AP (auto precharge) |
| Pin produk F8 | A11 — Address input 11 |
| Pin produk G2 | A12 — Address input 12 / BC (burst chop) |
| Pin produk G7 | A13 — Address input 13 |
| Pin produk G8 | A14 — Address input 14 |
| Pin produk H2 | A15 — Address input 15 |
| Pin produk H7 | A16 — Address input 16 |
| Pin produk H8 | A17 — Address input 17 |
| Pin produk K2 | BA0 — Bank address 0 |
| Pin produk K7 | BA1 — Bank address 1 |
| Pin produk K8 | BG0 — Bank group address 0 |
| Pin produk L2 | BG1 — Bank group address 1 |
| Pin produk L7 | CK — Differential clock (positive) |
| Pin produk L8 | CK# — Differential clock (negative) |
| Pin produk M2 | CKE — Clock enable |
| Pin produk M7 | CS# — Chip select (active low) |
| Pin produk M8 | ODT — On-die termination control |
| Pin produk N2 | ACT# — Activation command input (active low) |
| Pin produk N7 | RST# — Reset (active low, pulldown) |
| Pin produk N8 | PAR — Command/address parity input |
| Pin produk P2 | ALERT# — Alert output (open drain, pulldown) |
| Pin produk G1 | VDDQ — DQ power supply (1.2V) |
| Pin produk H1 | VDDQ — DQ power supply (1.2V) |
| Pin produk J1 | VDDQ — DQ power supply (1.2V) |
| Pin produk K1 | VDDQ — DQ power supply (1.2V) |
| Pin produk G9 | VSSQ — DQ ground |
| Pin produk H9 | VSSQ — DQ ground |
| Pin produk J9 | VSSQ — DQ ground |
| Pin produk K9 | VSSQ — DQ ground |
| Pin produk D1 | VDD — Core power supply (1.2V) |
| Pin produk E1 | VDD — Core power supply (1.2V) |
| Pin produk F1 | VDD — Core power supply (1.2V) |
| Pin produk D9 | VSS — Core ground |
| Pin produk E9 | VSS — Core ground |
| Pin produk F9 | VSS — Core ground |
| Pin produk M1 | VDD — Core power supply (1.2V) |
| Pin produk N1 | VDD — Core power supply (1.2V) |
| Pin produk M9 | VSS — Core ground |
| Pin produk N9 | VSS — Core ground |
| Pin produk C1 | VPP — DRAM activation power supply (2.5V) |
| Pin produk C3 | VPP — DRAM activation power supply (2.5V) |
| Pin produk C9 | VPP — DRAM activation power supply (2.5V) |
| Pin produk B1 | VSS — Ground |
| Pin produk B2 | VSS — Ground |
| Pin produk A6 | NC — Not connected (per datasheet) |
| Pin produk B3 | NC — Not connected (per datasheet) |
| Pin produk B4 | NC — Not connected (per datasheet) |
| Pin produk J2 | NC — Not connected (per datasheet) |
| Pin produk J7 | NC — Not connected (per datasheet) |
| Pin produk J8 | NC — Not connected (per datasheet) |
| Pin produk L1 | NC — Not connected (per datasheet) |
| Pin produk L9 | NC — Not connected (per datasheet) |
| Pin produk P1 | NC — Not connected (per datasheet) |
| Pin produk P7 | NC — Not connected (per datasheet) |
| Pin produk P8 | NC — Not connected (per datasheet) |
| Pin produk P9 | NC — Not connected (per datasheet) |
Aplikasi Umum
K4A8G085WB-BCPB cocok untuk 6 aplikasis: Desktop and Laptop Main Memory, Embedded Computing and Industrial PCs, Networking and Communications Equipment, Server and Data Center Memory Modules, Test and Measurement Instrumentation, Medical Imaging and Diagnostic Devices.
Desktop and Laptop Main Memory
The K4A8G085WB-BCPB is a core building block for PC4-25600 UDIMM and SO-DIMM modules used in desktop and laptop computers. Its 8Gb density in a 1G x 8 organization allows eight devices to populate a 64-bit channel with ECC on x8 lanes, while the 3200 Mbps data rate at CL22 matches mainstream DDR4 memory controller support. The 1.2V rail reduces module power versus DDR3, and dynamic ODT helps maintain signal integrity across multi-rank topologies. For module designers, the 11mm x 11mm FBGA-78 footprint aligns with standard DIMM land patterns, and TCSR trims standby power in mobile sleep states, extending battery life in portable systems.
Direkomendasikan
Embedded Computing and Industrial PCs
Industrial PCs, gateways, and embedded x86/ARM boards use the K4A8G085WB-BCPB soldered down for main memory, gaining 8Gb per device without SO-DIMM sockets that suffer from vibration. The 1.2V DDR4 interface reduces system heat in sealed fanless enclosures, while the 3200 Mbps grade matches common chipsets such as Intel Atom and AMD Ryzen Embedded families. Designers should place per-ball decoupling capacitors and length-match fly-by control nets. For extended-temperature deployments, consider the industrial-coded -BITD sibling, which shares the same footprint, keeping the PCB unchanged while improving the operating envelope.
Direkomendasikan
Networking and Communications Equipment
Switches, routers, and network appliances rely on the K4A8G085WB-BCPB for packet buffering and deep-flow tables, where the 16-bank, 4-bank-group architecture improves random-access parallelism and effective bandwidth. The x8 organization supports ECC scrubbing essential for long-uptime infrastructure, and 3200 Mbps operation keeps memory from bottlenecking multi-gigabit data paths. The 78-ball FBGA packages densely on control-line cards. Thermal design should account for continuous full-bandwidth traffic; use air flow plus thermal vias under the package, and enable ODT per the controller's calibration routine to hold margins across temperature.
Direkomendasikan
Server and Data Center Memory Modules
In RDIMM and ECC UDIMM builds, the K4A8G085WB-BCPB provides the x8 width required for single-device data correction (SDDC) on Intel and AMD server platforms. The BC-grade CL22 timing at DDR4-3200 aligns with standard server memory profiles, and the B-die silicon is well characterized for high reliability. Registered modules buffer command/address to scale to 16+ DIMMs per channel population. Designers stacking dual-rank DIMMs should verify CK/CA loading and drive-strength settings, and use the manufacturer datasheet refresh tables (7.8 us up to 85C) when configuring the memory controller's refresh rate in thermally constrained chassis.
Direkomendasikan
Test and Measurement Instrumentation
Oscilloscopes, logic analyzers, and arbitrary waveform generators need large, fast capture buffers, making the K4A8G085WB-BCPB a fit with its 3200 Mbps streaming capability and 8Gb per device. Multiple devices in 64-bit or 72-bit (ECC) arrays deliver the sustained write bandwidth needed for real-time acquisition without sample loss. The 1.2V interface reduces noise coupling into sensitive analog front ends versus older 1.5V DDR3 designs. Instrument designers should implement write-leveling and read-training firmware during production calibration, since FBGA soldered-down DRAM in compact boards demands precise per-trace timing closure for full-speed operation.
Direkomendasikan
Medical Imaging and Diagnostic Devices
Ultrasound, digital radiography, and lab analyzers accumulate large frame buffers that the K4A8G085WB-BCPB serves with 8Gb density and 3200 Mbps bandwidth, enabling real-time image pipelines at 1.2V power levels suited to patient-adjacent equipment. The soldered FBGA-78 package avoids connector reliability issues in mobile carts, and temperature-compensated self-refresh keeps standby draw low between scans. Designers should verify refresh timing against the datasheet operating window and use ECC-capable x8 organization to protect diagnostic data integrity. Add ground-plane shielding between DRAM and analog capture front ends to preserve low-noise imaging performance.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk K4A8G085WB-BCPB — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | K4A8G085WB-BCRC | K4A8G085WC-BCTD | H5AN8G8NDJR | MT40A1G8WE-075E |
|---|---|---|---|---|---|
| Package | 78-ball FBGA | 78-ball FBGA - same | 78-ball FBGA - same | 78-ball FBGA - same (JEDEC) | 78-ball FBGA - same (JEDEC) |
| Brand | Samsung Electronics | Samsung Electronics | Samsung Electronics | SK Hynix | Micron |
| Density | 8 Gbit | 8 Gbit | 8 Gbit | 8 Gbit | 8 Gbit |
| Organization | 1G x 8 | 1G x 8 | 1G x 8 | 1G x 8 | 1G x 8 |
| Data Rate | 3200 Mbps | 2666 Mbps (RC grade) | 2666 Mbps | 2666 Mbps (JR grade) | 1866 Mbps |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| CAS Latency | 22 | 19 (at grade rate) | 19 | 19 | 15 |
| Bank Architecture | 16 banks / 4 bank groups | 16 banks / 4 bank groups | 16 banks / 4 bank groups | 16 banks / 4 bank groups | 16 banks / 4 bank groups |
Diferensiator Kunci
- Full DDR4-3200 (BC grade) speed support (vsK4A8G085WB-BCRC)
- High-volume B-die supply base (vsMT40A1G8WE-075E)
- ECC-ready x8 organization with TDQS (vsK4A8G165WC-BCWE)
Catatan Desain
Route DDR4 using the standard fly-by topology for CK, address, and command nets with on-die termination enabled; keep DQS/DQ length-matched within the controller's specified skew window. Provide at least one 0.1uF decoupling capacitor per VDD/VDDQ ball pair placed within 2mm of the package, plus bulk capacitance at the voltage regulator module. The 78-ball FBGA footprint is JEDEC-standard, so land patterns interchange freely across Samsung, SK Hynix, and Micron x8 DDR4 devices.
The K4A8G085WB-BCPB requires two rails: 1.2V VDD/VDDQ and 2.5V VPP for word-line activation. Size the VPP rail for low average current but be aware activation peaks; do not omit VPP decoupling, as VPP droop causes cell instability errors. Estimated: total active power at DDR4-3200 per device is typically a few hundred milliwatts, dominated by I/O switching; verify against the datasheet IDD figures for your specific traffic pattern.
Configure the memory controller to the BC speed grade timing tables (CL22 at 3200 Mbps) before bring-up; running faster grade timings on slower-coded parts causes intermittent bit errors. Perform write-leveling, read training, and DQS gate calibration at every boot and at temperature extremes. When substituting the -BCRC or -BITD siblings, re-verify SPD data and controller settings - the package is identical but speed bins and temperature coding differ.
Informasi Konformitas
RoHS compliance per standard Samsung DRAM product data; REACH and halogen-free status not stated in provided data.
