IPL60R285P7AUMA1 - 600V 285mΩ 13A CoolMOS P7 MOSFET | Infineon
MPN: IPL60R285P7AUMA1 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $1.85 | $1.85 |
| 10 | $1.62 | $16.20 |
| 100 | $1.38 | $138.00 |
| 500 | $1.18 | $590.00 |
| 1,000 | $1.02 | $1,020.00 |
| 3,000 | $0.88 | $2,640.00 |
IPL60R285P7AUMA1 Overview
A superjunction power MOSFET is a high-voltage MOSFET architecture that uses alternating P- and N-doped vertical pillars to support the blocking voltage, enabling an order-of-magnitude lower RDS(on) per unit silicon area than conventional planar MOSFETs of the same voltage class. The CoolMOS P7 family is Infineon's 7th-generation superjunction platform and serves as the successor to the P6 line. Within the broader semiconductor taxonomy, this part sits at: power MOSFET -> discrete semiconductor -> high-voltage switch -> power management. Synonyms include "SJ MOSFET" and "high-voltage power transistor."
Key specifications include 600V drain-to-source breakdown (V(BR)DSS), 13A continuous drain current (ID) at Tc=25°C, pulsed drain current of approximately 52A, and a maximum power dissipation of 59W at Tc=25°C. The on-state resistance of 285 mΩ is specified at VGS=10V. The part features an integrated ESD protection diode on the gate, a fast body diode suitable for hard-switching topologies, and qualified operation over an industrial temperature range.
The PG-VSON-4 package offers an extremely low-profile surface-mount footprint with a Kelvin-source connection for improved gate-drive behavior and a low thermal resistance path to the PCB copper pad. This makes the IPL60R285P7AUMA1 well suited to compact high-density SMPS designs where conventional TO-220 or TO-247 packages cannot be used.
Typical applications include flyback and forward converters in LCD TV and monitor power supplies, server and telecom auxiliary power, LED lighting drivers, industrial SMPS, and solar micro-inverters. The CoolMOS P7 platform is particularly well suited to hard-switching PFC and LLC stages where the combination of low RDS(on), low Eoss, and integrated gate ESD simplifies the bill of materials.
When designing with this device, pay attention to gate-drive voltage levels (the standard 10V VGS provides full RDS(on) spec), keep the source-sensing loop tight to leverage the Kelvin connection, and observe the safe operating area curve during start-up and short-circuit events. The PG-VSON-4 package's thermal performance depends critically on PCB copper area - a minimum of 1 square inch of 2-oz copper on the drain tab is recommended for typical 30-50W applications.
This page consolidates distributor pricing, pin-compatible drop-in alternatives, and practical thermal/layout guidance not found in a single vendor listing, giving the design engineer an actionable decision framework for selecting, sourcing, and qualifying the IPL60R285P7AUMA1 in volume production.
Drop-in alternatives for IPL60R285P7AUMA1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with IPL60R285P7AUMA1 (same form factor and footprint) — differing in Technology, MSL Level, Operating Temperature Range, Package, Series.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
IPL60R365P7
✅ Drop-In📋 Reference alternative (not in catalog)
IPL60R185P7
✅ Drop-In📋 Reference alternative (not in catalog)
IAUCN08S7L033ATMA1
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$0.86 / Unit
View Datasheet →IKD15N60RFATMA1
✅ Drop-In ⚠️ 参数待验证✓ In Stock
$1.35 / Unit
View Datasheet →IPL60R285P7AUMA1 Maximum Ratings & Electrical Characteristics
| Manufacturer | Infineon Technologies |
| Series | CoolMOS P7 |
| Technology | Superjunction (SJ) N-channel MOSFET |
| Drain-to-Source Voltage (V(BR)DSS) | 600 V |
| Continuous Drain Current (ID) at Tc=25C | 13 A |
| On-State Resistance (RDS(on)) max at VGS=10V | 285 mΩ |
| Maximum Power Dissition (PD) at Tc=25C | 59 W |
| Operating Temperature Range | -55C to +150C (junction) |
| Package / Case | PG-VSON-4 (surface mount) |
| Mounting Type | Surface Mount |
| Configuration | Single N-channel, 4 pins (Gate, Drain, Source, Tab) |
| RoHS Status | Compliant |
| Gate ESD Protection | Integrated |
| MSL Level | 1 (per Infineon PG-VSON-4 family) |
IPL60R285P7AUMA1 Pin Configuration
| Pin 1 | Gate — Gate drive input; 10V VGS for full RDS(on) enhancement; integrated ESD protection diode |
| Pin 2 | Drain — Drain connection (also tied to thermal tab on PG-VSON-4 package; primary current path) |
| Pin 3 | Source — Source connection; return for gate-drive loop |
| Pin 4 | Drain Tab — Drain thermal pad / exposed tab (electrically tied to drain); PCB copper heatsink area |
Safe Operating Area (DC, Tj=150C)
Typical Applications
IPL60R285P7AUMA1 is suitable for 6 applications: Universal-Input PFC Boost Converter, Flyback Converter for LCD TV/Monitor Power, Server / Telecom Auxiliary Power Supply, LED Lighting Driver (Industrial High-Bay), Solar Micro-Inverter Primary Switch, Industrial SMPS and Welding Equipment.
Universal-Input PFC Boost Converter
The IPL60R285P7AUMA1 is well-suited to the boost PFC stage of a universal-input (85-264VAC) SMPS, where the rectified bus reaches 380V DC plus 20% transient margin. The part's 600V V(BR)DSS provides comfortable headroom over this bus voltage while its 285 mΩ RDS(on) keeps conduction loss low at full load. The CoolMOS P7 superjunction architecture further reduces switching loss through lower Eoss than the prior P6 generation, directly improving PFC efficiency at the 50-100kHz switching frequencies typical in CCM-PFC designs. Placed between the boost inductor and the output bulk capacitor with a SiC or Si diode, it enables >97% PFC efficiency at 230VAC input.
Recommended
Flyback Converter for LCD TV/Monitor Power
The IPL60R285P7AUMA1 serves as the primary-side switch in quasi-resonant (QR) or valley-switching flyback converters used in 50-150W LCD TV and monitor power supplies. Its 600V rating handles the 400V rectified bus with sufficient margin for reflected voltage spikes on the drain. The PG-VSON-4 surface-mount package enables slimline TV chassis designs where through-hole TO-220 parts cannot be used. The CoolMOS P7's reduced gate charge lowers drive-stage losses at the 65-100kHz operating frequencies typical of QR flyback, while the integrated gate ESD diode simplifies manufacturing by eliminating the need for an external gate Zener clamp.
Recommended
Server / Telecom Auxiliary Power Supply
In 80Plus-compliant server and telecom auxiliary power supplies (typically 12V/24V/48V outputs from 100-300W), the IPL60R285P7AUMA1 can serve as either the primary PFC switch or the main LLC half-bridge switch on the primary side. The 600V/13A rating fits within the LLC primary-side envelope for 1-2kW converters when two devices are paralleled in the half-bridge. The PG-VSON-4 package's low thermal resistance and excellent Kelvin-source connection enable tight gate-drive timing, which is essential for LLC resonant converters where dead-time accuracy directly affects efficiency. Its industrial temperature grade supports the long-life requirements of 24/7 server operation.
Recommended
LED Lighting Driver (Industrial High-Bay)
Industrial high-bay LED drivers operating from 277VAC or 347VAC commercial mains require a robust primary-side switch. The IPL60R285P7AUMA1 with its 600V V(BR)DSS comfortably handles the rectified bus of these high-line inputs while its 13A current rating supports 100-200W LED drivers (single-driver-per-fixture topology). The PG-VSON-4 surface-mount package suits the slim, sealed driver enclosures typical of high-bay luminaires. The CoolMOS P7's high efficiency at partial load (a key 80Plus-style metric for LED drivers that often operate below rated power) makes this part a strong fit for energy-conscious industrial lighting installations.
Recommended
Solar Micro-Inverter Primary Switch
In sub-300W solar micro-inverter front-end stages, the IPL60R285P7AUMA1 can be used as the primary-side switch of a high-voltage DC-DC boost stage that raises the panel voltage (typically 25-50V) to a 400V DC link before the grid-tie inverter stage. The 600V rating is required to handle the 400V link plus inductive ringing, while the 13A continuous current supports the 200-300W micro-inverter power class. The CoolMOS P7 platform's lower Eoss enables higher switching frequencies, allowing smaller magnetics in the boost inductor - critical for the small-form-factor outdoor enclosure typical of micro-inverters.
Recommended
Industrial SMPS and Welding Equipment
The IPL60R285P7AUMA1 fits the primary-side switch position in industrial SMPS designs (machine tools, factory automation, welding inverter front-ends) where the input is 3-phase 380-480VAC rectified to 540-680V DC bus. While the 600V V(BR)DSS requires careful derating on 480VAC three-phase input, the part remains usable at derated SOA or with active clamping. The 13A continuous current and 59W dissipation rating support 1-2kW industrial power supplies when paired with thermal management. The PG-VSON-4 surface-mount package supports the compact, vibration-resistant design preferred in industrial environments where through-hole parts can fail under mechanical stress.
Recommended
Recommended Products Summary
Engineering reference data for IPL60R285P7AUMA1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | IPL60R365P7 | IPL60R185P7 | IPB60R280P7ATMA1 | IAUCN08S7L033ATMA1 |
|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-VSON-4 | PG-VSON-4 (same) | PG-VSON-4 (same) | PG-TO-263 (D2PAK) - DIFFERENT | PG-VSON-4 (same footprint) |
| V(BR)DSS (V) | 600 | 600 | 600 | 600 | 80 (not 600V-class) |
| Technology Family | CoolMOS P7 Superjunction | CoolMOS P7 Superjunction | CoolMOS P7 Superjunction | CoolMOS P7 Superjunction | OptiMOS (different V class) |
| Gate ESD Protection | Integrated | Integrated | Integrated | Integrated | Integrated |
Key Differentiators
- CoolMOS P7 superjunction platform with reduced Eoss vs P6 generation (vs IPL60R365P7 (same family, higher RDS(on)))
- Higher current rating than 11A-class alternatives (vs IPL60R365P7 (11A ID))
- Lower conduction loss vs. higher-RDS(on) P7 family member (vs IPB60R280P7ATMA1 (PG-TO-263 package, 280 mΩ))
Design Notes
The PG-VSON-4 package of the IPL60R285P7AUMA1 dissipates 59W at Tc=25°C, but at typical SMPS operation (Tc=100°C) the practical dissipation limit drops to approximately 30W before junction temperature exceeds 150°C. Estimated: with 2-oz copper and 1 square inch of drain-tab copper area, theta_JA is approximately 50 C/W. Provide a minimum of 1 square inch of 2-oz copper on the drain tab and at least 9 thermal vias (0.3mm drill) for heat transfer to inner copper planes. For higher-power applications, increase the copper area or add forced-air cooling.
The PG-VSON-4 package includes a Kelvin-source pin connection. To exploit this in the layout, connect the gate-driver's source return directly to the package's source pin (NOT to the power-source copper). This eliminates the source-inductance voltage drop from the gate-drive loop, preventing the well-known 'gate-drive ringing' issue that otherwise slows switching and increases EMI. Keep the gate-loop copper area minimal - typically less than 5mm x 5mm - and use a 10Ω gate-source resistor for damping.
Three common pitfalls when designing with the IPL60R285P7AUMA1: (1) Exceeding the 600V V(BR)DSS during drain-voltage ringing - always add an RCD snubber or use a gate-drain capacitance clamp to limit overshoot below 540V on a 400V DC bus; (2) Driving the gate with insufficient voltage - the part's RDS(on) spec is at VGS=10V, and using a 12V driver ensures full enhancement even under transients; (3) Forgetting the body-diode reverse-recovery behavior in bridge topologies - while CoolMOS P7 has an improved body diode, hard-switched half-bridges should still validate commutation at full load and temperature.
Place the IPL60R285P7AUMA1 so that the drain tab has direct thermal via access to a solid inner-layer copper pour (typically inner layer 2 with at least 2-oz copper). Route the high-current drain trace on a separate layer from the gate-drive signal, and keep the drain copper area minimal to reduce parasitic capacitance that increases switching loss. Source-quiet copper (Kelvin connection) should be a dedicated small island connected only to the source pin and the gate-driver ground, NOT shared with the power source path.
Compliance Information
RoHS compliant per Infineon product page. Industrial-grade (not AEC-Q100 automotive qualified). MSL-1 rated per JEDEC J-STD-020.
