EP1S30F780C6GA - Stratix FPGA 32470 LEs 780-FBGA | Intel
부품 번호: EP1S30F780C6GA ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1337.09 | $1,337.09 |
| 10 | $1280 | $12,800.00 |
| 100 | $1200 | $120,000.00 |
| 500 | $1150 | $575,000.00 |
| 1,000 | $1100 | $1,100,000.00 |
EP1S30F780C6GA 개요
A Field-Programmable Gate Array (FPGA) is a programmable logic device that combines configurable logic blocks, programmable interconnect, and dedicated silicon IP such as block RAM, DSP slices, PLLs, and high-speed serial transceivers. FPGAs sit above fixed-function ASICs and microcontrollers in the silicon hierarchy because they offer hardware-level parallelism with the ability to be re-programmed in-system, placing them in the broader category of programmable logic devices (PLDs) within digital semiconductors.
Key features of the EP1S30F780C6GA include 32,470 logic elements, 3,317,184 RAM bits, 597 maximum user I/O pins, embedded DSP blocks for high-throughput multiplication-accumulation, multiple phase-locked loops for clock management, and support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL. The 780-FBGA package exposes all user I/O through a high-density ball grid that supports dense board layouts.
The EP1S30F780C6GA uses Altera's Stratix architecture with embedded memory and dedicated signal-processing blocks. Designers configure logic and routing through the Quartus II design software, which is also used for timing closure, floorplanning, and bitstream generation. The architecture targets high-throughput parallel processing where conventional processors would bottleneck.
Typical applications include communications infrastructure such as base station baseband and protocol bridging, industrial automation controllers, high-speed data acquisition front-ends, and military/aerospace signal processing. The 597-I/O capacity also makes the device suitable for prototyping ASIC designs and for high-density test and measurement instrumentation.
When designing with this part, pay close attention to power planning: the 1.5 V core supply must be tightly decoupled with bulk and ceramic capacitors close to each supply pin. The 780-BGA footprint requires careful PCB stack-up and via-in-pad or microvia technology for reliable assembly. Signal integrity must be simulated for high-speed LVDS pairs and external memory interfaces to maintain timing margins.
This product page consolidates distributor pricing, parametric comparison, and a drop-in alternative list to streamline sourcing and design decisions, supplementing the official Intel datasheet.
드롭인 대체품: EP1S30F780C6GA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP1S30F780C6GA (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Speed Grade, Process Technology, DSP Blocks.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP1S30F780C6
✅ 드롭인✓ 재고 있음
$1125 / 개
데이터시트 보기 →EP1S25F780C6
✅ 드롭인✓ 재고 있음
$791.02 / 개
데이터시트 보기 →EP1S25F780C6N
✅ 드롭인✓ 재고 있음
$780 / 개
데이터시트 보기 →EP1S20F780C6
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →EP1S20F780C6N
✅ 드롭인✓ 재고 있음
$188.75 / 개
데이터시트 보기 →EP1S30F780C6GA 최대 정격 & 전기적 특성
| Series | Stratix |
| Family | Stratix FPGA |
| Logic Elements | 32,470 |
| Total RAM Bits | 3,317,184 |
| Number of I/O | 597 (maximum user I/O) |
| Core Voltage | 1.425 V to 1.575 V |
| Process Technology | 0.13 um |
| 패키지 / 케이스 | 780-BBGA, FCBGA |
| Supplier Device Package | 780-FBGA (29 x 29 mm) |
| 실장 유형 | Surface Mount |
| DSP Blocks | Integrated dedicated multipliers |
| PLL Count | Multiple (per Stratix family) |
| Configuration Memory | SRAM-based, volatile |
| Architecture | Altera Stratix (programmable logic + TriMatrix memory + DSP blocks) |
EP1S30F780C6GA 780-fbga (29 x 29 mm) 핀 구성 가이드
EP1S30F780C6GA(780-fbga (29 x 29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: EP1S30F780C6GA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
EP1S30F780C6GA 적합 용도: 6 애플리케이션s: Communications Baseband Processing, Industrial Automation and Control, High-Speed Data Acquisition Front-Ends, ASIC Prototyping and Emulation, Military and Aerospace Signal Processing, Test and Measurement Instrumentation.
Communications Baseband Processing
The EP1S30F780C6GA suits communications baseband and protocol-bridging designs because of its 32,470 logic elements and dedicated DSP blocks for high-throughput multiply-accumulate operations. Its 597 user I/O accommodate multiple external memory interfaces (DDR, QDR, SRAM) and high-speed LVDS links to RF front-ends. The 1.5 V core and Stratix TriMatrix memory deliver deterministic latency for symbol-rate processing in 3G/4G base stations.
추천
Industrial Automation and Control
Industrial controllers, programmable logic controllers (PLCs), and motion-control systems benefit from the EP1S30F780C6GA's high logic density and abundant I/O. The 597 available user I/O can drive dozens of sensor inputs, encoder feedback channels, and actuator outputs concurrently. Integrated PLLs provide deterministic clocking for multi-axis servo loops, and Quartus II enables deterministic real-time firmware development for safety-critical machinery.
추천
High-Speed Data Acquisition Front-Ends
The EP1S30F780C6GA's 3,317,184 RAM bits provide buffering for streaming ADC data at hundreds of MSPS, while 597 user I/O support wide LVDS or parallel CMOS interfaces to high-resolution converters. The dedicated DSP blocks accelerate FIR filtering and FFT pipelines commonly required in oscilloscopes, spectrum analyzers, and software-defined radio front-ends. Pin counts at 597 leave ample margin for downstream processing and storage links.
추천
ASIC Prototyping and Emulation
Designers use the EP1S30F780C6GA for ASIC prototyping and hardware emulation because the 32,470 LEs can map large RTL blocks before committing to silicon. The 780-FBGA package exposes enough I/O to bring out test points, memory buses, and emulation headers. Quartus II integration with synthesis tools allows rapid incremental compilation cycles that speed verification of multi-million-gate ASIC designs.
추천
Military and Aerospace Signal Processing
The EP1S30F780C6GA, when ordered with industrial or military temperature grades, serves in avionics, radar processing, and electronic-warfare subsystems. Its high logic density implements parallel beamforming and pulse-Doppler processing at sample rates unattainable with general-purpose processors. The 780-BGA package supports ruggedized board stacks with underfill and is documented in the Stratix Device Handbook for defense applications.
추천
Test and Measurement Instrumentation
Logic analyzers, protocol testers, and bit-error-rate testers leverage the EP1S30F780C6GA's 597 I/O for multi-channel pattern generation and capture. On-chip TriMatrix memory buffers deep acquisition records, while DSP blocks accelerate real-time protocol decoding. Quartus II IP cores for PCIe, Ethernet, and serial RapidIO simplify integrating the FPGA into modular instrumentation chassis.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP1S30F780C6GA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP1S30F780C6 | EP1S25F780C6 | EP1S25F780C6N | EP1S20F780C6 | EP1S20F780C6N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 780-FBGA (29x29) | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same |
| Logic Elements | 32,470 | 32,470 (same) | 25,660 | 25,660 | 18,460 | 18,460 |
| Total RAM Bits | 3,317,184 | 3,317,184 (same) | 1,922,048 | 1,922,048 | 1,663,696 | 1,663,696 |
| User I/O (max) | 597 | 597 | 597 | 597 | 586 | 586 |
| Core Voltage | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V |
| Speed Grade | C6 | C6 | C6 | C6 | C6 | C6 |
| Lead-Free (N suffix) | Unknown | Unknown | Unknown | Yes (N suffix) | Unknown | Yes (N suffix) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
주요 차별점
- Higher logic capacity in same 780-FBGA footprint (vs EP1S25F780C6)
- Larger TriMatrix memory than smaller density siblings (vs EP1S20F780C6)
- Single-supply 1.5 V core simplifies power architecture (vs Cross-brand SRAM FPGAs)
설계 노트
Estimated: at a typical Stratix core current of approximately 1.5 A at 1.5 V plus I/O bank power, the EP1S30F780C6GA can draw 3 to 5 W depending on toggle rate. Use a buck regulator with at least 10 percent headroom on the 1.5 V rail, and decouple with 100 nF X7R ceramic capacitors within 5 mm of every supply pin plus bulk polymer or tantalum capacitors on each power plane. The 780-FBGA exposes dozens of GND balls; connect all to a continuous ground plane for thermal dissipation.
The 780-FBGA package has a fine 1.0 mm ball pitch, which typically requires 0.4 mm laser-drilled microvias and via-in-pad technology for reliable assembly. Use a high-Tg FR-4 or low-loss PCB laminate to manage z-axis expansion, and apply underfill during board-level reliability qualification. Per the Stratix Device Handbook pinout guide, all 597 user I/O are assigned to banks; place bank reference voltage pins with local decoupling and verify with the Quartus II pin planner before tape-out.
Stratix SRAM-based FPGAs are volatile and must be configured at every power-up from a configuration device such as an EPC16 or EPCS serial flash; forgetting the configuration source renders the device non-functional. JTAG and passive serial configuration modes are supported but require dedicated pins that must be reserved in the pin planner. Mixing I/O standards across banks without matching VREF voltages causes input latch-up, and exceeding the 1.575 V maximum core voltage instantly destroys the die.
규정 준수 정보
RoHS, REACH, lead-free, halogen-free, and conflict-mineral compliance were not present in the verified distributor snippets for EP1S30F780C6GA. Intel/Altera discontinued the original Stratix family long before these compliance fields were systematically published, so most reseller listings do not surface them. Industrial (I) temperature grade variants exist for the same die.