H5AN8G6NDJR - 8Gb DDR4-3200 SDRAM | SK hynix
料号： H5AN8G6NDJR ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $45.11 | $45.11 |
| 10 | $42.5 | $425.00 |
| 100 | $39.8 | $3,980.00 |
| 500 | $37.2 | $18,600.00 |
| 1,000 | $35 | $35,000.00 |
H5AN8G6NDJR 概述
DDR4 SDRAM is the fourth generation of double data rate synchronous dynamic random-access memory, succeeding DDR3. It achieves higher speed and lower power consumption through a prefetch of 8n, on-die termination (ODT), and a lower operating voltage of 1.2V compared to DDR3's 1.5V. DDR4 is a key component in the memory hierarchy, sitting between the CPU and storage, and is essential for system performance in servers, PCs, and embedded computing.
Key features include auto self-refresh, auto precharge, asynchronous reset, data mask, dynamic on-chip termination (Dynamic ODT), ZQ calibration, CRC (cyclic redundancy check), and write leveling. These features enhance signal integrity, reliability, and power efficiency, making the device suitable for high-speed data transmission and robust operation in demanding environments.
The device supports a burst length of 8 and a burst chop of 4, with a CAS latency of 22 cycles at 3200 Mbps. It operates over a temperature range of 0°C to 85°C (TC) and is RoHS compliant. The 96-ball FBGA package with a 0.8mm ball pitch enables compact PCB layouts, while the 1.2V supply reduces power consumption compared to previous generations.
Typical applications include main memory for servers, high-performance computing, networking equipment, and industrial control systems. The high density and bandwidth make it ideal for applications requiring large memory capacity and fast data throughput, such as data centers and AI accelerators.
When designing with this device, ensure proper decoupling capacitors near the power pins and follow the layout guidelines in the datasheet to maintain signal integrity at 3200 Mbps. The ZQ calibration pin requires a 240-ohm resistor to ground for correct impedance calibration.
直接替换替代料： H5AN8G6NDJR ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： H5AN8G6NDJR （相同外形与封装尺寸） ——差异在于 Package, Data Rate, Operating Temperature, Memory Size, Burst Length.
快速对比工具——选择替代料号进行并排对比：
H5AN8G6NDJR-XNC
✅ 直接替换✓ 有现货
$55.6818 / 个
查看数据手册 →H5AN8G6NCJR-xxC
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$6.5 / 个
查看数据手册 →K4A8G165WB-BCTD
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$37 / 个
查看数据手册 →MT40A512M16TB-062E:R
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$60 / 个
查看数据手册 →K4A8G165WB-BCRC
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$12.57 / 个
查看数据手册 →MT40A512M16TB-062E:IT
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
H5AN8G6NDJR 最大额定值与电气特性
| 存储器类型 | DDR4 SDRAM |
| Density | 8 Gb |
| 存储组织 | 512M x 16 |
| 数据速率 | 3200 Mbps (DDR4-3200) |
| 电源电压 | 1.2 V |
| 封装 | 96-ball FBGA (13mm x 7.5mm) |
| Number of Terminals | 96 |
| Maximum Supply Voltage (Vsup) | 1.26 V |
| Maximum Operating Temperature | 85 °C |
| Burst Length | 8 (BL8), 4 (BC4) |
| CAS 延迟 | 22 cycles (at 3200 Mbps) |
| Access Mode | Multi Bank Page Burst |
| JESD-30 Code | R-PBGA-B96 |
| RoHS | Compliant |
| 特性 | Auto self-refresh, auto precharge, asynchronous reset, data mask, dynamic ODT, ZQ calibration, CRC, write leveling |
H5AN8G6NDJR 引脚配置
| 引脚 A1 | VDD — Power supply (1.2V) |
| 引脚 A2 | DQ0 — Data input/output 0 |
| 引脚 A3 | DQ1 — Data input/output 1 |
| 引脚 A4 | VSS — Ground |
| 引脚 A5 | DQ2 — Data input/output 2 |
| 引脚 A6 | DQ3 — Data input/output 3 |
| 引脚 A7 | VDD — Power supply (1.2V) |
| 引脚 A8 | DQ4 — Data input/output 4 |
| 引脚 A9 | DQ5 — Data input/output 5 |
| 引脚 A10 | VSS — Ground |
| 引脚 A11 | DQ6 — Data input/output 6 |
| 引脚 A12 | DQ7 — Data input/output 7 |
| 引脚 B1 | VSS — Ground |
| 引脚 B2 | DQ8 — Data input/output 8 |
| 引脚 B3 | DQ9 — Data input/output 9 |
| 引脚 B4 | VDD — Power supply (1.2V) |
| 引脚 B5 | DQ10 — Data input/output 10 |
| 引脚 B6 | DQ11 — Data input/output 11 |
| 引脚 B7 | VSS — Ground |
| 引脚 B8 | DQ12 — Data input/output 12 |
| 引脚 B9 | DQ13 — Data input/output 13 |
| 引脚 B10 | VDD — Power supply (1.2V) |
| 引脚 B11 | DQ14 — Data input/output 14 |
| 引脚 B12 | DQ15 — Data input/output 15 |
| 引脚 C1 | VDD — Power supply (1.2V) |
| 引脚 C2 | DQS0 — Data strobe 0 |
| 引脚 C3 | DQS0# — Data strobe 0 complement |
| 引脚 C4 | VSS — Ground |
| 引脚 C5 | DQS1 — Data strobe 1 |
| 引脚 C6 | DQS1# — Data strobe 1 complement |
| 引脚 C7 | VDD — Power supply (1.2V) |
| 引脚 C8 | DQS2 — Data strobe 2 |
| 引脚 C9 | DQS2# — Data strobe 2 complement |
| 引脚 C10 | VSS — Ground |
| 引脚 C11 | DQS3 — Data strobe 3 |
| 引脚 C12 | DQS3# — Data strobe 3 complement |
| 引脚 D1 | VSS — Ground |
| 引脚 D2 | DM0 — Data mask 0 |
| 引脚 D3 | DM1 — Data mask 1 |
| 引脚 D4 | VDD — Power supply (1.2V) |
| 引脚 D5 | DM2 — Data mask 2 |
| 引脚 D6 | DM3 — Data mask 3 |
| 引脚 D7 | VSS — Ground |
| 引脚 D8 | A0 — Address input 0 |
| 引脚 D9 | A1 — Address input 1 |
| 引脚 D10 | VDD — Power supply (1.2V) |
| 引脚 D11 | A2 — Address input 2 |
| 引脚 D12 | A3 — Address input 3 |
| 引脚 E1 | VDD — Power supply (1.2V) |
| 引脚 E2 | A4 — Address input 4 |
| 引脚 E3 | A5 — Address input 5 |
| 引脚 E4 | VSS — Ground |
| 引脚 E5 | A6 — Address input 6 |
| 引脚 E6 | A7 — Address input 7 |
| 引脚 E7 | VDD — Power supply (1.2V) |
| 引脚 E8 | A8 — Address input 8 |
| 引脚 E9 | A9 — Address input 9 |
| 引脚 E10 | VSS — Ground |
| 引脚 E11 | A10/AP — Address input 10 / auto precharge |
| 引脚 E12 | A11 — Address input 11 |
| 引脚 F1 | VSS — Ground |
| 引脚 F2 | A12 — Address input 12 |
| 引脚 F3 | A13 — Address input 13 |
| 引脚 F4 | VDD — Power supply (1.2V) |
| 引脚 F5 | A14 — Address input 14 |
| 引脚 F6 | A15 — Address input 15 |
| 引脚 F7 | VSS — Ground |
| 引脚 F8 | BA0 — Bank address 0 |
| 引脚 F9 | BA1 — Bank address 1 |
| 引脚 F10 | VDD — Power supply (1.2V) |
| 引脚 F11 | BA2 — Bank address 2 |
| 引脚 F12 | BG0 — Bank group 0 |
| 引脚 G1 | VDD — Power supply (1.2V) |
| 引脚 G2 | BG1 — Bank group 1 |
| 引脚 G3 | CK — Clock input |
| 引脚 G4 | CK# — Clock input complement |
| 引脚 G5 | VSS — Ground |
| 引脚 G6 | CKE — Clock enable |
| 引脚 G7 | VDD — Power supply (1.2V) |
| 引脚 G8 | CS# — Chip select |
| 引脚 G9 | RAS# — Row address strobe |
| 引脚 G10 | VSS — Ground |
| 引脚 G11 | CAS# — Column address strobe |
| 引脚 G12 | WE# — Write enable |
| 引脚 H1 | VSS — Ground |
| 引脚 H2 | ODT0 — On-die termination 0 |
| 引脚 H3 | ODT1 — On-die termination 1 |
| 引脚 H4 | VDD — Power supply (1.2V) |
| 引脚 H5 | RESET# — Asynchronous reset |
| 引脚 H6 | VSS — Ground |
| 引脚 H7 | VDD — Power supply (1.2V) |
| 引脚 H8 | ZQ — ZQ calibration |
| 引脚 H9 | VSS — Ground |
| 引脚 H10 | VDD — Power supply (1.2V) |
| 引脚 H11 | VSS — Ground |
| 引脚 H12 | VDD — Power supply (1.2V) |
典型应用
H5AN8G6NDJR 适用于 6 应用s: Server Main Memory, Networking Equipment, Industrial Control Systems, High-Performance Computing, Embedded Systems, Data Center Storage.
Server Main Memory
The H5AN8G6NDJR provides 8Gb density and 3200 Mbps bandwidth, making it ideal for server main memory. Its high speed and low power (1.2V) enhance server performance and energy efficiency. In a server DIMM, multiple devices are combined to achieve the desired capacity and ECC support. The x16 organization allows for high bandwidth per chip, reducing the number of devices needed for a given capacity. The device's auto self-refresh and dynamic ODT features improve signal integrity and reliability in multi-rank configurations. When designing server memory, ensure proper termination and layout to maintain signal integrity at 3200 Mbps.
推荐
Networking Equipment
In networking equipment such as routers and switches, the H5AN8G6NDJR provides high-bandwidth memory for packet buffering and forwarding tables. Its 3200 Mbps data rate ensures fast processing of network traffic, while the 1.2V supply reduces power consumption in always-on equipment. The device's CRC feature enhances data integrity, critical for network reliability. The compact FBGA-96 package allows for dense PCB layouts, saving board space. When used in networking designs, consider the thermal environment and ensure adequate cooling to maintain the 0°C to 85°C operating range.
推荐
Industrial Control Systems
The H5AN8G6NDJR is suitable for industrial control systems requiring reliable, high-density memory. Its wide operating temperature range (0°C to 85°C) and features like auto self-refresh and write leveling ensure stable operation in harsh environments. The device's low power consumption is beneficial for systems with limited power budgets. In industrial applications, the memory is often used for data logging, real-time control, and HMI interfaces. The FBGA-96 package is robust and suitable for vibration-prone environments. Designers should ensure proper power decoupling and follow layout guidelines to minimize noise.
推荐
High-Performance Computing
In HPC systems, the H5AN8G6NDJR delivers the high bandwidth and capacity needed for complex simulations and data analysis. Its 3200 Mbps data rate and 8Gb density enable large memory pools with fast access times. The device's low latency and high throughput are critical for parallel processing workloads. The x16 organization allows for efficient memory channel utilization. When designing HPC memory subsystems, consider the total memory bandwidth and capacity requirements, and ensure the memory controller supports the device's timing parameters.
推荐
Embedded Systems
The H5AN8G6NDJR is used in embedded systems requiring high-density memory with low power consumption. Its 1.2V supply and auto self-refresh feature help extend battery life in portable devices. The compact FBGA-96 package is ideal for space-constrained designs. The device's features like data mask and write leveling support reliable operation in embedded applications. When integrating this memory, ensure the host processor's memory controller is compatible with DDR4-3200 and the x16 organization.
推荐
Data Center Storage
In data center storage systems, the H5AN8G6NDJR provides high-speed memory for caching and metadata management. Its high bandwidth and low latency improve storage performance, while the 1.2V supply reduces power consumption in large-scale deployments. The device's CRC feature ensures data integrity, critical for storage reliability. The FBGA-96 package allows for high-density memory modules, maximizing storage capacity per server. When designing storage systems, consider the memory requirements for caching algorithms and ensure adequate cooling.
推荐
推荐产品汇总
工程参考数据： H5AN8G6NDJR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | H5AN8G6NDJR-XNC | K4A8G165WB-BCTD | MT40A512M16TB-062E:R |
|---|---|---|---|---|
| Package | 96-ball FBGA (13x7.5mm) | 96-ball FBGA (13x7.5mm) | 96-ball FBGA (13x7.5mm) | 96-ball FBGA (13x7.5mm) |
| Brand | SK hynix | SK hynix | Samsung | Micron |
| Density | 8 Gb | 8 Gb | 8 Gb | 8 Gb |
| Organization | 512M x 16 | 512M x 16 | 512M x 16 | 512M x 16 |
| Data Rate | 3200 Mbps | 3200 Mbps | 3200 Mbps | 3200 Mbps |
| Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Operating Temperature | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
| RoHS | Compliant | Compliant | Compliant | Compliant |
关键差异点
- High density and bandwidth （对比 K4A8G165WB-BCTD)
- Advanced features （对比 MT40A512M16TB-062E:R)
- Low power consumption （对比 K4A8G165WB-BCTD)
设计说明
For DDR4-3200 operation, maintain controlled impedance of 40-50 ohms for DQ/DQS signals and 50-60 ohms for address/control signals. Use ground planes beneath the memory device to minimize noise. Place decoupling capacitors (0.1uF and 1uF) close to each VDD and VDDQ pin. Follow the layout guidelines in the SK hynix datasheet for signal integrity.
The H5AN8G6NDJR operates up to 85°C. In high-density systems, ensure adequate airflow or heatsinking to keep the junction temperature within limits. The FBGA-96 package has a thermal resistance that should be considered; refer to the datasheet for theta_JA values. For high-power applications, consider thermal vias under the package.
Ensure the ZQ pin is connected to a 240-ohm resistor to ground for correct impedance calibration. Do not leave the RESET# pin floating; tie it high during normal operation. Verify that the memory controller supports DDR4-3200 and the x16 organization. Incorrect termination or missing ZQ resistor can cause signal integrity issues.
合规信息
RoHS compliant per LCSC and JLCPCB listings. Other compliance data not specified in verified sources.
